From: Samuel Holland Date: Thu, 26 May 2022 03:26:02 +0000 (-0500) Subject: ARM: dts: sun4i: Sync from Linux v5.18-rc1 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=006ef34bd436fbd3ea42cdf7de66d1a665527a4b;p=u-boot.git ARM: dts: sun4i: Sync from Linux v5.18-rc1 Copy the devicetree source for the A10 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. The previous version of this change was only partially applied. Fixes: 4746694cba74 ("ARM: dts: sun4i: Sync from Linux v5.18-rc1") Signed-off-by: Samuel Holland Signed-off-by: Andre Przywara --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8a314210da..5caedf7bd3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -539,7 +539,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb \ sun4i-a10-pcduino2.dtb \ - sun4i-a10-pov-protab2-ips9.dtb + sun4i-a10-pov-protab2-ips9.dtb \ + sun4i-a10-topwise-a721.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi index 0d9ff12bdf..ca240cd6f6 100644 --- a/arch/arm/dts/axp209.dtsi +++ b/arch/arm/dts/axp209.dtsi @@ -53,7 +53,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp202-ac-power-supply"; status = "disabled"; }; @@ -69,7 +69,7 @@ #gpio-cells = <2>; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp209-battery-power-supply"; status = "disabled"; }; @@ -112,7 +112,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts index 6c254ec4c8..20f9ed2448 100644 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ b/arch/arm/dts/sun4i-a10-a1000.dts @@ -60,15 +60,26 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; - red { + led-0 { label = "a1000:red:usr"; gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; - blue { + led-1 { label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -125,7 +136,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -133,6 +144,20 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts index 38a2c41349..816d534ac0 100644 --- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts @@ -68,7 +68,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts index cf7b392dff..7426298888 100644 --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -131,20 +131,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -165,10 +151,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts index 197a1f2b75..0645d60642 100644 --- a/arch/arm/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/dts/sun4i-a10-cubieboard.dts @@ -75,12 +75,12 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_cubieboard>; - blue { + led-0 { label = "cubieboard:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; - green { + led-1 { label = "cubieboard:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; @@ -114,7 +114,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -184,12 +184,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_ahci_5v { @@ -254,9 +248,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts index 896e27a087..63e77c05bf 100644 --- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { @@ -158,20 +159,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,10 +210,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts index cc988ccd5c..47dea09225 100644 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/dts/sun4i-a10-hackberry.dts @@ -80,7 +80,7 @@ }; &emac { - phy = <&phy0>; + phy-handle = <&phy0>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts index f63767cddd..bf2044bac4 100644 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts @@ -86,20 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -121,10 +107,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts index 26d0c1d6a0..60e432a0ef 100644 --- a/arch/arm/dts/sun4i-a10-inet1.dts +++ b/arch/arm/dts/sun4i-a10-inet1.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { @@ -164,20 +165,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -233,10 +220,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts index 221acd10f6..0a562b2cc5 100644 --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts @@ -61,10 +61,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_inet9f>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; left-joystick-left { @@ -72,7 +68,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; left-joystick-right { @@ -80,7 +76,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; left-joystick-up { @@ -88,7 +84,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; left-joystick-down { @@ -96,7 +92,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; right-joystick-left { @@ -104,7 +100,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; right-joystick-right { @@ -112,7 +108,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; right-joystick-up { @@ -120,7 +116,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; right-joystick-down { @@ -128,7 +124,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; dpad-left { @@ -136,7 +132,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ + gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; dpad-right { @@ -144,7 +140,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; dpad-up { @@ -152,7 +148,7 @@ linux,code = ; linux,input-type = ; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; dpad-down { @@ -160,55 +156,55 @@ linux,code = ; linux,input-type = ; linux,input-value = <1>; - gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; x { label = "Button X"; linux,code = ; - gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ + gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; y { label = "Button Y"; linux,code = ; - gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ + gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; a { label = "Button A"; linux,code = ; - gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; b { label = "Button B"; linux,code = ; - gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ + gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; select { label = "Select Button"; linux,code = ; - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; start { label = "Start Button"; linux,code = ; - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; top-left { label = "Top Left Button"; linux,code = ; - gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ + gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; top-right { label = "Top Right Button"; linux,code = ; - gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ + gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ }; }; }; @@ -308,30 +304,6 @@ status = "okay"; }; -&pio { - key_pins_inet9f: key-pins { - pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -377,10 +349,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts index 80ecd78247..d4e319d16a 100644 --- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -58,7 +58,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts index 247fa27ef7..1aeb0bd551 100644 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts @@ -63,7 +63,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "q5:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ }; @@ -94,7 +94,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts index 0dbf695765..81fdb217d3 100644 --- a/arch/arm/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/dts/sun4i-a10-marsboard.dts @@ -62,22 +62,22 @@ leds { compatible = "gpio-leds"; - red1 { + led-0 { label = "marsboard:red1:usr"; gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; }; - red2 { + led-1 { label = "marsboard:red2:usr"; gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; }; - red3 { + led-2 { label = "marsboard:red3:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; - red4 { + led-3 { label = "marsboard:red4:usr"; gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; }; @@ -105,7 +105,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -148,14 +148,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -183,9 +175,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts index b74a614965..83d283cf66 100644 --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts @@ -74,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a10-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -91,12 +91,11 @@ /* * The A10-Lime is known to be unstable when running at 1008 MHz */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + operating-points = + /* kHz uV */ + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; }; &de { @@ -112,7 +111,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -186,18 +185,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -229,10 +216,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts index b97a0f2f20..1ac82376ba 100644 --- a/arch/arm/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/dts/sun4i-a10-pcduino.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; back { label = "Key Back"; @@ -112,7 +110,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -156,14 +154,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -203,9 +193,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts index 84b25be1ac..c325969476 100644 --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { @@ -146,20 +147,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -211,10 +198,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts new file mode 100644 index 0000000000..3628f12d25 --- /dev/null +++ b/arch/arm/dts/sun4i-a10-topwise-a721.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Pascal Roeleven + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include +#include + +/ { + model = "Topwise A721"; + compatible = "topwise,a721", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>; + power-supply = <®_vbat>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + panel { + compatible = "starry,kr070pe2t"; + backlight = <&backlight>; + power-supply = <®_lcd_power>; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; + + reg_lcd_power: reg-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "reg-lcd-power"; + gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + enable-active-high; + }; + + reg_vbat: reg-vbat { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + accelerometer@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-571 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <571428>; + }; + + button-761 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-ph-supply = <®_vcc3v3>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&tcon0_out { + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi index 3a1c6b45c9..51a6464aab 100644 --- a/arch/arm/dts/sun4i-a10.dtsi +++ b/arch/arm/dts/sun4i-a10.dtsi @@ -115,13 +115,12 @@ reg = <0x0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; #cooling-cells = <2>; }; }; @@ -143,7 +142,7 @@ trips { cpu_alert0: cpu-alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; @@ -184,14 +183,34 @@ status = "disabled"; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x40000000 0x10000000>; + reusable; + linux,cma-default; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -224,6 +243,19 @@ status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -234,7 +266,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -309,6 +341,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -358,6 +391,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -394,6 +428,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun4i-a10-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; @@ -450,13 +495,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -530,8 +576,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -579,6 +623,16 @@ status = "disabled"; }; + csi1: csi@1c1d000 { + compatible = "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <43>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; + status = "disabled"; + }; + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; @@ -625,6 +679,31 @@ function = "can"; }; + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + emac_pins: emac0-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -762,13 +841,20 @@ timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&osc24M>; }; wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <24>; + clocks = <&osc24M>; }; rtc: rtc@1c20d00 { @@ -1001,6 +1087,27 @@ status = "disabled"; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, + <70>, + <71>, + <72>, + <73>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + fe0: display-frontend@1e00000 { compatible = "allwinner,sun4i-a10-display-frontend"; reg = <0x01e00000 0x20000>;