From: Andre Przywara Date: Sun, 11 Jun 2023 23:32:36 +0000 (+0100) Subject: phy: sun4i-usb: add Allwinner F1C100s support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=003fbb2f8e7c6f278513d6a5f2d101f924a4044d;p=u-boot.git phy: sun4i-usb: add Allwinner F1C100s support The Allwinner F1C100s implements a single USB PHY, connected to its MUSB OTG controller. The USB PHY is of the simpler, older type (like the A10), the only real difference is that it's indeed only one PHY. Add a struct describing those F1C100s USB PHY properties, and connect it to the new compatible string. Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index dbea70f9a5..2bf47fc36a 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -648,6 +648,14 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { .missing_phys = BIT(1) | BIT(2), }; +static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { + .num_phys = 1, + .type = sun4i_a10_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, +}; + static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg }, @@ -662,6 +670,7 @@ static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun20i-d1-usb-phy", .data = (ulong)&sun20i_d1_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg}, { .compatible = "allwinner,sun50i-h6-usb-phy", .data = (ulong)&sun50i_h6_cfg}, + { .compatible = "allwinner,suniv-f1c100s-usb-phy", .data = (ulong)&suniv_f1c100s_cfg }, { } };