arm: dts: k3-am64: sync with Linux DT files

Sync AM64 DT files with Linux v6.2-rc4

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/dts/k3-am64-main.dtsi b/arch/arm/dts/k3-am64-main.dtsi
index 57b0f53ac965eaf1e97bd3408d89146500870f74..5e8036f32d79dc15878a9231a74bd746f7661678 100644 (file)
--- a/arch/arm/dts/k3-am64-main.dtsi
+++ b/arch/arm/dts/k3-am64-main.dtsi
@@ -59,7 +59,10 @@
                #interrupt-cells = <3>;
                interrupt-controller;
                reg = <0x00 0x01800000 0x00 0x10000>,   /* GICD */
-                     <0x00 0x01840000 0x00 0xC0000>;   /* GICR */
+                     <0x00 0x01840000 0x00 0xC0000>,   /* GICR */
+                     <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+                     <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+                     <0x01 0x00020000 0x00 0x2000>;    /* GICV */
                /*
                 * vcpumntirq:
                 * virtual CPU interface maintenance interrupt
@@ -171,7 +174,7 @@
                compatible = "ti,k2g-sci";
                ti,host-id = <12>;
                mbox-names = "rx", "tx";
-               mboxes= <&secure_proxy_main 12>,
+               mboxes = <&secure_proxy_main 12>,
                        <&secure_proxy_main 13>;
                reg-names = "debug_messages";
                reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -217,6 +220,12 @@
                        reg = <0x4044 0x8>;
                        #phy-cells = <1>;
                };
+
+               epwm_tbclk: clock@4140 {
+                       compatible = "ti,am64-epwm-tbclk", "syscon";
+                       reg = <0x4130 0x4>;
+                       #clock-cells = <1>;
+               };
        };
 
        main_uart0: serial@2800000 {
@@ -228,6 +237,7 @@
                power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 146 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart1: serial@2810000 {
@@ -239,6 +249,7 @@
                power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 152 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart2: serial@2820000 {
@@ -250,6 +261,7 @@
                power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 153 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart3: serial@2830000 {
@@ -261,6 +273,7 @@
                power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 154 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart4: serial@2840000 {
@@ -272,6 +285,7 @@
                power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 155 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart5: serial@2850000 {
@@ -283,6 +297,7 @@
                power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 156 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_uart6: serial@2860000 {
@@ -294,6 +309,7 @@
                power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 158 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        main_i2c0: i2c@20000000 {
@@ -305,6 +321,7 @@
                power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 102 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        main_i2c1: i2c@20010000 {
@@ -316,6 +333,7 @@
                power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 103 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        main_i2c2: i2c@20020000 {
@@ -327,6 +345,7 @@
                power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 104 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        main_i2c3: i2c@20030000 {
@@ -338,6 +357,7 @@
                power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 105 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        main_spi0: spi@20100000 {
@@ -350,6 +370,7 @@
                clocks = <&k3_clks 141 0>;
                dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
                dma-names = "tx0", "rx0";
+               status = "disabled";
        };
 
        main_spi1: spi@20110000 {
@@ -360,6 +381,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 142 0>;
+               status = "disabled";
        };
 
        main_spi2: spi@20120000 {
@@ -370,6 +392,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 143 0>;
+               status = "disabled";
        };
 
        main_spi3: spi@20130000 {
@@ -380,6 +403,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 144 0>;
+               status = "disabled";
        };
 
        main_spi4: spi@20140000 {
@@ -390,6 +414,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 145 0>;
+               status = "disabled";
        };
 
        main_gpio_intr: interrupt-controller@a00000 {
@@ -447,13 +472,11 @@
                clock-names = "clk_ahb", "clk_xin";
                mmc-ddr-1_8v;
                mmc-hs200-1_8v;
-               mmc-hs400-1_8v;
                ti,trm-icp = <0x2>;
                ti,otap-del-sel-legacy = <0x0>;
                ti,otap-del-sel-mmc-hs = <0x0>;
                ti,otap-del-sel-ddr52 = <0x6>;
                ti,otap-del-sel-hs200 = <0x7>;
-               ti,otap-del-sel-hs400 = <0x4>;
        };
 
        sdhci1: mmc@fa00000 {
@@ -529,6 +552,7 @@
                        clocks = <&k3_clks 13 0>;
                        clock-names = "fck";
                        bus_freq = <1000000>;
+                       status = "disabled";
                };
 
                cpts@3d000 {
@@ -543,7 +567,7 @@
                };
        };
 
-       cpts@39000000 {
+       main_cpts0: cpts@39000000 {
                compatible = "ti,j721e-cpts";
                reg = <0x0 0x39000000 0x0 0x400>;
                reg-names = "cpts";
@@ -558,6 +582,14 @@
                ti,cpts-ext-ts-inputs = <8>;
        };
 
+       timesync_router: pinctrl@a40000 {
+               compatible = "pinctrl-single";
+               reg = <0x0 0xa40000 0x0 0x800>;
+               #pinctrl-cells = <1>;
+               pinctrl-single,register-width = <32>;
+               pinctrl-single,function-mask = <0x000107ff>;
+       };
+
        usbss0: cdns-usb@f900000{
                compatible = "ti,am64-usb";
                reg = <0x00 0xf900000 0x00 0x100>;
@@ -597,7 +629,7 @@
                assigned-clocks = <&k3_clks 0 0>;
                assigned-clock-parents = <&k3_clks 0 3>;
                assigned-clock-rates = <60000000>;
-               clock-names = "adc_tsc_fck";
+               clock-names = "fck";
 
                adc {
                        #io-channel-cells = <1>;
@@ -840,6 +872,7 @@
                ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
                         <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
                dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+               status = "disabled";
        };
 
        pcie0_ep: pcie-ep@f102000 {
@@ -858,23 +891,505 @@
                clocks = <&k3_clks 114 0>;
                clock-names = "fck";
                max-functions = /bits/ 8 <1>;
+               status = "disabled";
+       };
+
+       epwm0: pwm@23000000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23000000 0x0 0x100>;
+               power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm1: pwm@23010000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23010000 0x0 0x100>;
+               power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm2: pwm@23020000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23020000 0x0 0x100>;
+               power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm3: pwm@23030000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23030000 0x0 0x100>;
+               power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm4: pwm@23040000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23040000 0x0 0x100>;
+               power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm5: pwm@23050000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23050000 0x0 0x100>;
+               power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm6: pwm@23060000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23060000 0x0 0x100>;
+               power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm7: pwm@23070000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23070000 0x0 0x100>;
+               power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       epwm8: pwm@23080000 {
+               compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23080000 0x0 0x100>;
+               power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
+               clock-names = "tbclk", "fck";
+               status = "disabled";
+       };
+
+       ecap0: pwm@23100000 {
+               compatible = "ti,am64-ecap", "ti,am3352-ecap";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23100000 0x0 0x60>;
+               power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 51 0>;
+               clock-names = "fck";
+               status = "disabled";
+       };
+
+       ecap1: pwm@23110000 {
+               compatible = "ti,am64-ecap", "ti,am3352-ecap";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23110000 0x0 0x60>;
+               power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 52 0>;
+               clock-names = "fck";
+               status = "disabled";
+       };
+
+       ecap2: pwm@23120000 {
+               compatible = "ti,am64-ecap", "ti,am3352-ecap";
+               #pwm-cells = <3>;
+               reg = <0x0 0x23120000 0x0 0x60>;
+               power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 53 0>;
+               clock-names = "fck";
+               status = "disabled";
        };
 
        main_rti0: watchdog@e000000 {
-               compatible = "ti,j7-rti-wdt";
-               reg = <0x00 0xe000000 0x00 0x100>;
-               clocks = <&k3_clks 125 0>;
-               power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
-               assigned-clocks = <&k3_clks 125 0>;
-               assigned-clock-parents = <&k3_clks 125 2>;
+                       compatible = "ti,j7-rti-wdt";
+                       reg = <0x00 0xe000000 0x00 0x100>;
+                       clocks = <&k3_clks 125 0>;
+                       power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+                       assigned-clocks = <&k3_clks 125 0>;
+                       assigned-clock-parents = <&k3_clks 125 2>;
        };
 
        main_rti1: watchdog@e010000 {
-               compatible = "ti,j7-rti-wdt";
-               reg = <0x00 0xe010000 0x00 0x100>;
-               clocks = <&k3_clks 126 0>;
-               power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
-               assigned-clocks = <&k3_clks 126 0>;
-               assigned-clock-parents = <&k3_clks 126 2>;
+                       compatible = "ti,j7-rti-wdt";
+                       reg = <0x00 0xe010000 0x00 0x100>;
+                       clocks = <&k3_clks 126 0>;
+                       power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+                       assigned-clocks = <&k3_clks 126 0>;
+                       assigned-clock-parents = <&k3_clks 126 2>;
+       };
+
+       icssg0: icssg@30000000 {
+               compatible = "ti,am642-icssg";
+               reg = <0x00 0x30000000 0x00 0x80000>;
+               power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0x0 0x00 0x30000000 0x80000>;
+
+               icssg0_mem: memories@0 {
+                       reg = <0x0 0x2000>,
+                             <0x2000 0x2000>,
+                             <0x10000 0x10000>;
+                       reg-names = "dram0", "dram1", "shrdram2";
+               };
+
+               icssg0_cfg: cfg@26000 {
+                       compatible = "ti,pruss-cfg", "syscon";
+                       reg = <0x26000 0x200>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x26000 0x2000>;
+
+                       clocks {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               icssg0_coreclk_mux: coreclk-mux@3c {
+                                       reg = <0x3c>;
+                                       #clock-cells = <0>;
+                                       clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
+                                                <&k3_clks 81 20>; /* icssg0_iclk */
+                                       assigned-clocks = <&icssg0_coreclk_mux>;
+                                       assigned-clock-parents = <&k3_clks 81 20>;
+                               };
+
+                               icssg0_iepclk_mux: iepclk-mux@30 {
+                                       reg = <0x30>;
+                                       #clock-cells = <0>;
+                                       clocks = <&k3_clks 81 3>,       /* icssg0_iep_clk */
+                                                <&icssg0_coreclk_mux>; /* icssg0_coreclk_mux */
+                                       assigned-clocks = <&icssg0_iepclk_mux>;
+                                       assigned-clock-parents = <&icssg0_coreclk_mux>;
+                               };
+                       };
+               };
+
+               icssg0_mii_rt: mii-rt@32000 {
+                       compatible = "ti,pruss-mii", "syscon";
+                       reg = <0x32000 0x100>;
+               };
+
+               icssg0_mii_g_rt: mii-g-rt@33000 {
+                       compatible = "ti,pruss-mii-g", "syscon";
+                       reg = <0x33000 0x1000>;
+               };
+
+               icssg0_intc: interrupt-controller@20000 {
+                       compatible = "ti,icssg-intc";
+                       reg = <0x20000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "host_intr0", "host_intr1",
+                                         "host_intr2", "host_intr3",
+                                         "host_intr4", "host_intr5",
+                                         "host_intr6", "host_intr7";
+               };
+
+               pru0_0: pru@34000 {
+                       compatible = "ti,am642-pru";
+                       reg = <0x34000 0x3000>,
+                             <0x22000 0x100>,
+                             <0x22400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-pru0_0-fw";
+               };
+
+               rtu0_0: rtu@4000 {
+                       compatible = "ti,am642-rtu";
+                       reg = <0x4000 0x2000>,
+                             <0x23000 0x100>,
+                             <0x23400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-rtu0_0-fw";
+               };
+
+               tx_pru0_0: txpru@a000 {
+                       compatible = "ti,am642-tx-pru";
+                       reg = <0xa000 0x1800>,
+                             <0x25000 0x100>,
+                             <0x25400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-txpru0_0-fw";
+               };
+
+               pru0_1: pru@38000 {
+                       compatible = "ti,am642-pru";
+                       reg = <0x38000 0x3000>,
+                             <0x24000 0x100>,
+                             <0x24400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-pru0_1-fw";
+               };
+
+               rtu0_1: rtu@6000 {
+                       compatible = "ti,am642-rtu";
+                       reg = <0x6000 0x2000>,
+                             <0x23800 0x100>,
+                             <0x23c00 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-rtu0_1-fw";
+               };
+
+               tx_pru0_1: txpru@c000 {
+                       compatible = "ti,am642-tx-pru";
+                       reg = <0xc000 0x1800>,
+                             <0x25800 0x100>,
+                             <0x25c00 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-txpru0_1-fw";
+               };
+
+               icssg0_mdio: mdio@32400 {
+                       compatible = "ti,davinci_mdio";
+                       reg = <0x32400 0x100>;
+                       clocks = <&k3_clks 62 3>;
+                       clock-names = "fck";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       bus_freq = <1000000>;
+                       status = "disabled";
+               };
+       };
+
+       icssg1: icssg@30080000 {
+               compatible = "ti,am642-icssg";
+               reg = <0x00 0x30080000 0x00 0x80000>;
+               power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0x0 0x00 0x30080000 0x80000>;
+
+               icssg1_mem: memories@0 {
+                       reg = <0x0 0x2000>,
+                             <0x2000 0x2000>,
+                             <0x10000 0x10000>;
+                       reg-names = "dram0", "dram1", "shrdram2";
+               };
+
+               icssg1_cfg: cfg@26000 {
+                       compatible = "ti,pruss-cfg", "syscon";
+                       reg = <0x26000 0x200>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x26000 0x2000>;
+
+                       clocks {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               icssg1_coreclk_mux: coreclk-mux@3c {
+                                       reg = <0x3c>;
+                                       #clock-cells = <0>;
+                                       clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
+                                                <&k3_clks 82 20>;  /* icssg1_iclk */
+                                       assigned-clocks = <&icssg1_coreclk_mux>;
+                                       assigned-clock-parents = <&k3_clks 82 20>;
+                               };
+
+                               icssg1_iepclk_mux: iepclk-mux@30 {
+                                       reg = <0x30>;
+                                       #clock-cells = <0>;
+                                       clocks = <&k3_clks 82 3>,       /* icssg1_iep_clk */
+                                                <&icssg1_coreclk_mux>; /* icssg1_coreclk_mux */
+                                       assigned-clocks = <&icssg1_iepclk_mux>;
+                                       assigned-clock-parents = <&icssg1_coreclk_mux>;
+                               };
+                       };
+               };
+
+               icssg1_mii_rt: mii-rt@32000 {
+                       compatible = "ti,pruss-mii", "syscon";
+                       reg = <0x32000 0x100>;
+               };
+
+               icssg1_mii_g_rt: mii-g-rt@33000 {
+                       compatible = "ti,pruss-mii-g", "syscon";
+                       reg = <0x33000 0x1000>;
+               };
+
+               icssg1_intc: interrupt-controller@20000 {
+                       compatible = "ti,icssg-intc";
+                       reg = <0x20000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "host_intr0", "host_intr1",
+                                         "host_intr2", "host_intr3",
+                                         "host_intr4", "host_intr5",
+                                         "host_intr6", "host_intr7";
+               };
+
+               pru1_0: pru@34000 {
+                       compatible = "ti,am642-pru";
+                       reg = <0x34000 0x4000>,
+                             <0x22000 0x100>,
+                             <0x22400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-pru1_0-fw";
+               };
+
+               rtu1_0: rtu@4000 {
+                       compatible = "ti,am642-rtu";
+                       reg = <0x4000 0x2000>,
+                             <0x23000 0x100>,
+                             <0x23400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-rtu1_0-fw";
+               };
+
+               tx_pru1_0: txpru@a000 {
+                       compatible = "ti,am642-tx-pru";
+                       reg = <0xa000 0x1800>,
+                             <0x25000 0x100>,
+                             <0x25400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-txpru1_0-fw";
+               };
+
+               pru1_1: pru@38000 {
+                       compatible = "ti,am642-pru";
+                       reg = <0x38000 0x4000>,
+                             <0x24000 0x100>,
+                             <0x24400 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-pru1_1-fw";
+               };
+
+               rtu1_1: rtu@6000 {
+                       compatible = "ti,am642-rtu";
+                       reg = <0x6000 0x2000>,
+                             <0x23800 0x100>,
+                             <0x23c00 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-rtu1_1-fw";
+               };
+
+               tx_pru1_1: txpru@c000 {
+                       compatible = "ti,am642-tx-pru";
+                       reg = <0xc000 0x1800>,
+                             <0x25800 0x100>,
+                             <0x25c00 0x100>;
+                       reg-names = "iram", "control", "debug";
+                       firmware-name = "am64x-txpru1_1-fw";
+               };
+
+               icssg1_mdio: mdio@32400 {
+                       compatible = "ti,davinci_mdio";
+                       reg = <0x32400 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       clocks = <&k3_clks 82 0>;
+                       clock-names = "fck";
+                       bus_freq = <1000000>;
+                       status = "disabled";
+               };
+       };
+
+       main_mcan0: can@20701000 {
+               compatible = "bosch,m_can";
+               reg = <0x00 0x20701000 0x00 0x200>,
+                     <0x00 0x20708000 0x00 0x8000>;
+               reg-names = "m_can", "message_ram";
+               power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 98 5>, <&k3_clks 98 0>;
+               clock-names = "hclk", "cclk";
+               interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "int0", "int1";
+               bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+               status = "disabled";
+       };
+
+       main_mcan1: can@20711000 {
+               compatible = "bosch,m_can";
+               reg = <0x00 0x20711000 0x00 0x200>,
+                     <0x00 0x20718000 0x00 0x8000>;
+               reg-names = "m_can", "message_ram";
+               power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
+               clock-names = "hclk", "cclk";
+               interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "int0", "int1";
+               bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+               status = "disabled";
+       };
+
+       crypto: crypto@40900000 {
+               compatible = "ti,am64-sa2ul";
+               reg = <0x00 0x40900000 0x00 0x1200>;
+               power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>;
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+               dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>,
+                      <&main_pktdma 0x4003 0>;
+               dma-names = "tx", "rx1", "rx2";
+
+               rng: rng@40910000 {
+                       compatible = "inside-secure,safexcel-eip76";
+                       reg = <0x00 0x40910000 0x00 0x7d>;
+                       interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled"; /* Used by OP-TEE */
+               };
+       };
+
+       gpmc0: memory-controller@3b000000 {
+               compatible = "ti,am64-gpmc";
+               power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 80 0>;
+               clock-names = "fck";
+               reg = <0x00 0x3b000000 0x00 0x400>,
+                     <0x00 0x50000000 0x00 0x8000000>;
+               reg-names = "cfg", "data";
+               interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+               gpmc,num-cs = <3>;
+               gpmc,num-waitpins = <2>;
+               #address-cells = <2>;
+               #size-cells = <1>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
+               gpio-controller;
+               #gpio-cells = <2>;
+               status = "disabled";
+       };
+
+       elm0: ecc@25010000 {
+               compatible = "ti,am64-elm";
+               reg = <0x00 0x25010000 0x00 0x2000>;
+               interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+               power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+               clocks = <&k3_clks 54 0>;
+               clock-names = "fck";
+               status = "disabled";
        };
 };

diff --git a/arch/arm/dts/k3-am64-mcu.dtsi b/arch/arm/dts/k3-am64-mcu.dtsi
index 2bb5c9ff172c9b09db3f7570429cb41744f60d08..38ddf0b3b8a0c5400c1fa6ef5080b87a42a5fa67 100644 (file)
--- a/arch/arm/dts/k3-am64-mcu.dtsi
+++ b/arch/arm/dts/k3-am64-mcu.dtsi
@@ -10,22 +10,22 @@
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a00000 0x00 0x100>;
                interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 149 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        mcu_uart1: serial@4a10000 {
                compatible = "ti,am64-uart", "ti,am654-uart";
                reg = <0x00 0x04a10000 0x00 0x100>;
                interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-               clock-frequency = <48000000>;
                current-speed = <115200>;
                power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 160 0>;
                clock-names = "fclk";
+               status = "disabled";
        };
 
        mcu_i2c0: i2c@4900000 {
@@ -37,6 +37,7 @@
                power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 106 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        mcu_i2c1: i2c@4910000 {
@@ -48,6 +49,7 @@
                power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 107 2>;
                clock-names = "fck";
+               status = "disabled";
        };
 
        mcu_spi0: spi@4b00000 {
@@ -58,6 +60,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 147 0>;
+               status = "disabled";
        };
 
        mcu_spi1: spi@4b10000 {
@@ -68,6 +71,7 @@
                #size-cells = <0>;
                power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
                clocks = <&k3_clks 148 0>;
+               status = "disabled";
        };
 
        mcu_gpio_intr: interrupt-controller@4210000 {

diff --git a/arch/arm/dts/k3-am64.dtsi b/arch/arm/dts/k3-am64.dtsi
index 053e7f42e99145e5b820da15f9934d7aa3f49803..c858725133af49a27cd7f1535527d530dbb42f97 100644 (file)
--- a/arch/arm/dts/k3-am64.dtsi
+++ b/arch/arm/dts/k3-am64.dtsi
@@ -30,6 +30,8 @@
                serial8 = &main_uart6;
                ethernet0 = &cpsw_port1;
                ethernet1 = &cpsw_port2;
+               mmc0 = &sdhci0;
+               mmc1 = &sdhci1;
        };
 
        chosen { };
@@ -80,6 +82,7 @@
                         <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
                         <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
                         <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
+                        <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */
                         <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
                         <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
                         <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
@@ -88,6 +91,7 @@
                         <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
                         <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
                         <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+                        <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
                         <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
                         <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
 

diff --git a/arch/arm/dts/k3-am642-evm.dts b/arch/arm/dts/k3-am642-evm.dts
index 0307122211889cac9afa8bb1bc6c9d907b60c3a4..39feea78a084eeee870ae83318c2e30e470fa673 100644 (file)
--- a/arch/arm/dts/k3-am642-evm.dts
+++ b/arch/arm/dts/k3-am642-evm.dts
@@ -13,7 +13,7 @@
 #include "k3-am642.dtsi"
 
 / {
-       compatible =  "ti,am642-evm", "ti,am642";
+       compatible = "ti,am642-evm", "ti,am642";
        model = "Texas Instruments AM642 EVM";
 
        chosen {
@@ -184,6 +184,20 @@
                        };
                };
        };
+
+       transceiver1: can-phy0 {
+               compatible = "ti,tcan1042";
+               #phy-cells = <0>;
+               max-bitrate = <5000000>;
+               standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>;
+       };
+
+       transceiver2: can-phy1 {
+               compatible = "ti,tcan1042";
+               #phy-cells = <0>;
+               max-bitrate = <5000000>;
+               standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
+       };
 };
 
 &main_pmx0 {
@@ -288,9 +302,30 @@
                        AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
                >;
        };
+
+       main_ecap0_pins_default: main-ecap0-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+               >;
+       };
+
+       main_mcan0_pins_default: main-mcan0-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
+                       AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
+               >;
+       };
+
+       main_mcan1_pins_default: main-mcan1-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
+                       AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
+               >;
+       };
 };
 
 &main_uart0 {
+       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&main_uart0_pins_default>;
 };
@@ -300,35 +335,8 @@
        status = "reserved";
 };
 
-&main_uart2 {
-       status = "disabled";
-};
-
-&main_uart3 {
-       status = "disabled";
-};
-
-&main_uart4 {
-       status = "disabled";
-};
-
-&main_uart5 {
-       status = "disabled";
-};
-
-&main_uart6 {
-       status = "disabled";
-};
-
-&mcu_uart0 {
-       status = "disabled";
-};
-
-&mcu_uart1 {
-       status = "disabled";
-};
-
 &main_i2c1 {
+       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&main_i2c1_pins_default>;
        clock-frequency = <400000>;
@@ -371,23 +379,8 @@
        status = "reserved";
 };
 
-&mcu_i2c0 {
-       status = "disabled";
-};
-
-&mcu_i2c1 {
-       status = "disabled";
-};
-
-&mcu_spi0 {
-       status = "disabled";
-};
-
-&mcu_spi1 {
-       status = "disabled";
-};
-
 &main_spi0 {
+       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&main_spi0_pins_default>;
        ti,pindir-d0-out-d1-in;
@@ -432,8 +425,7 @@
 
 &cpsw3g {
        pinctrl-names = "default";
-       pinctrl-0 = <&mdio1_pins_default
-                    &rgmii1_pins_default
+       pinctrl-0 = <&rgmii1_pins_default
                     &rgmii2_pins_default>;
 };
 
@@ -448,6 +440,10 @@
 };
 
 &cpsw3g_mdio {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio1_pins_default>;
+
        cpsw3g_phy0: ethernet-phy@0 {
                reg = <0>;
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -464,7 +460,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&ospi0_pins_default>;
 
-       flash@0{
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0x0>;
                spi-tx-bus-width = <8>;
@@ -475,8 +471,6 @@
                cdns,tchsh-ns = <60>;
                cdns,tslch-ns = <60>;
                cdns,read-delay = <4>;
-               #address-cells = <1>;
-               #size-cells = <1>;
        };
 };
 
@@ -562,6 +556,7 @@
 };
 
 &pcie0_rc {
+       status = "okay";
        reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
        phys = <&serdes0_pcie_link>;
        phy-names = "pcie-phy";
@@ -572,5 +567,25 @@
        phys = <&serdes0_pcie_link>;
        phy-names = "pcie-phy";
        num-lanes = <1>;
-       status = "disabled";
+};
+
+&ecap0 {
+       status = "okay";
+       /* PWM is available on Pin 1 of header J12 */
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_ecap0_pins_default>;
+};
+
+&main_mcan0 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_mcan0_pins_default>;
+       phys = <&transceiver1>;
+};
+
+&main_mcan1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_mcan1_pins_default>;
+       phys = <&transceiver2>;
 };

diff --git a/arch/arm/dts/k3-am642-sk.dts b/arch/arm/dts/k3-am642-sk.dts
index d3aa2901e6fdaeb2cc400515dde2a3fb71dfc8dd..2e2d40da360a274e0b2cc9c8164f45b31434b1a7 100644 (file)
--- a/arch/arm/dts/k3-am642-sk.dts
+++ b/arch/arm/dts/k3-am642-sk.dts
@@ -9,10 +9,11 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/leds/common.h>
 #include "k3-am642.dtsi"
 
 / {
-       compatible =  "ti,am642-sk", "ti,am642";
+       compatible = "ti,am642-sk", "ti,am642";
        model = "Texas Instruments AM642 SK";
 
        chosen {
@@ -125,6 +126,99 @@
                vin-supply = <&vcc_3v3_sys>;
                gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
        };
+
+       com8_ls_en: regulator-1 {
+               compatible = "regulator-fixed";
+               regulator-name = "com8_ls_en";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               pinctrl-0 = <&main_com8_ls_en_pins_default>;
+               pinctrl-names = "default";
+               gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
+       };
+
+       wlan_en: regulator-2 {
+               /* output of SN74AVC4T245RSVR */
+               compatible = "regulator-fixed";
+               regulator-name = "wlan_en";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               enable-active-high;
+               pinctrl-0 = <&main_wlan_en_pins_default>;
+               pinctrl-names = "default";
+               vin-supply = <&com8_ls_en>;
+               gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
+       };
+
+       led-controller {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <1>;
+                       gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-1 {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <2>;
+                       gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-2 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <3>;
+                       gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-3 {
+                       color = <LED_COLOR_ID_AMBER>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <4>;
+                       gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-4 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <5>;
+                       gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-5 {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <6>;
+                       gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-6 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_INDICATOR;
+                       function-enumerator = <7>;
+                       gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+
+               led-7 {
+                       color = <LED_COLOR_ID_AMBER>;
+                       function = LED_FUNCTION_HEARTBEAT;
+                       function-enumerator = <8>;
+                       linux,default-trigger = "heartbeat";
+                       gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+               };
+       };
 };
 
 &main_pmx0 {
@@ -141,6 +235,15 @@
                >;
        };
 
+       main_uart0_pins_default: main-uart0-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+                       AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+                       AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+                       AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+               >;
+       };
+
        main_usb0_pins_default: main-usb0-pins-default {
                pinctrl-single,pins = <
                        AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
@@ -210,14 +313,35 @@
                        AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
                >;
        };
-};
 
-&mcu_uart0 {
-       status = "disabled";
+       main_ecap0_pins_default: main-ecap0-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+               >;
+       };
+       main_wlan_en_pins_default: main-wlan-en-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
+               >;
+       };
+
+       main_com8_ls_en_pins_default: main-com8-ls-en-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
+               >;
+       };
+
+       main_wlan_pins_default: main-wlan-pins-default {
+               pinctrl-single,pins = <
+                       AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
+               >;
+       };
 };
 
-&mcu_uart1 {
-       status = "disabled";
+&main_uart0 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_uart0_pins_default>;
 };
 
 &main_uart1 {
@@ -225,35 +349,8 @@
        status = "reserved";
 };
 
-&main_uart2 {
-       status = "disabled";
-};
-
-&main_uart3 {
-       status = "disabled";
-};
-
-&main_uart4 {
-       status = "disabled";
-};
-
-&main_uart5 {
-       status = "disabled";
-};
-
-&main_uart6 {
-       status = "disabled";
-};
-
-&mcu_i2c0 {
-       status = "disabled";
-};
-
-&mcu_i2c1 {
-       status = "disabled";
-};
-
 &main_i2c1 {
+       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&main_i2c1_pins_default>;
        clock-frequency = <400000>;
@@ -268,18 +365,14 @@
                                  "VPP_LDO_EN", "RPI_PS_3V3_En",
                                  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
        };
-};
-
-&main_i2c3 {
-       status = "disabled";
-};
-
-&mcu_spi0 {
-       status = "disabled";
-};
 
-&mcu_spi1 {
-       status = "disabled";
+       exp2: gpio@60 {
+               compatible = "ti,tpic2810";
+               reg = <0x60>;
+               gpio-controller;
+               #gpio-cells = <2>;
+               gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+       };
 };
 
 /* mcu_gpio0 is reserved for mcu firmware usage */
@@ -287,6 +380,26 @@
        status = "reserved";
 };
 
+&sdhci0 {
+       vmmc-supply = <&wlan_en>;
+       bus-width = <4>;
+       non-removable;
+       cap-power-off-card;
+       keep-power-in-suspend;
+       ti,driver-strength-ohm = <50>;
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       wlcore: wlcore@2 {
+               compatible = "ti,wl1837";
+               reg = <2>;
+               pinctrl-0 = <&main_wlan_pins_default>;
+               pinctrl-names = "default";
+               interrupt-parent = <&main_gpio0>;
+               interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
+       };
+};
+
 &sdhci1 {
        /* SD/MMC */
        vmmc-supply = <&vdd_mmc1>;
@@ -326,8 +439,7 @@
 
 &cpsw3g {
        pinctrl-names = "default";
-       pinctrl-0 = <&mdio1_pins_default
-                    &rgmii1_pins_default
+       pinctrl-0 = <&rgmii1_pins_default
                     &rgmii2_pins_default>;
 };
 
@@ -342,6 +454,10 @@
 };
 
 &cpsw3g_mdio {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio1_pins_default>;
+
        cpsw3g_phy0: ethernet-phy@0 {
                reg = <0>;
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -363,7 +479,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&ospi0_pins_default>;
 
-       flash@0{
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0x0>;
                spi-tx-bus-width = <8>;
@@ -374,8 +490,6 @@
                cdns,tchsh-ns = <60>;
                cdns,tslch-ns = <60>;
                cdns,read-delay = <4>;
-               #address-cells = <1>;
-               #size-cells = <1>;
        };
 };
 
@@ -446,10 +560,9 @@
                        <&main_r5fss1_core1_memory_region>;
 };
 
-&pcie0_rc {
-       status = "disabled";
-};
-
-&pcie0_ep {
-       status = "disabled";
+&ecap0 {
+       status = "okay";
+       /* PWM is available on Pin 1 of header J3 */
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_ecap0_pins_default>;
 };

diff --git a/arch/arm/dts/k3-am642.dtsi b/arch/arm/dts/k3-am642.dtsi
index e2b397c88401858594a4de131cdb7d422a2472dc..8a76f4821b11b0dcadb84fd3a92034885c24eeae 100644 (file)
--- a/arch/arm/dts/k3-am642.dtsi
+++ b/arch/arm/dts/k3-am642.dtsi
@@ -60,6 +60,6 @@
                cache-level = <2>;
                cache-size = <0x40000>;
                cache-line-size = <64>;
-               cache-sets = <512>;
+               cache-sets = <256>;
        };
 };