reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >>
MXC_CCM_CACRR_ARM_PODF_OFFSET;
- freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
+ freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
return freq / (reg + 1);
}
reg = __raw_readl(&mxc_ccm->cbcdr);
if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL))
- return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ);
+ return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
reg = __raw_readl(&mxc_ccm->cbcmr);
switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >>
MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) {
case 0:
- return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
+ return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
case 1:
- return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ);
+ return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
default:
return 0;
}
MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) {
case 0x0:
freq = decode_pll(mxc_plls[PLL1_CLOCK],
- CONFIG_MX51_HCLK_FREQ);
+ CONFIG_SYS_MX5_HCLK);
break;
case 0x1:
freq = decode_pll(mxc_plls[PLL2_CLOCK],
- CONFIG_MX51_HCLK_FREQ);
+ CONFIG_SYS_MX5_HCLK);
break;
case 0x2:
freq = decode_pll(mxc_plls[PLL3_CLOCK],
- CONFIG_MX51_HCLK_FREQ);
+ CONFIG_SYS_MX5_HCLK);
break;
default:
return 66500000;
u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
if (((ccsr >> 9) & 1) == 0)
- ret_val = CONFIG_MX51_HCLK_FREQ;
+ ret_val = CONFIG_SYS_MX5_HCLK;
else
ret_val = ((32768 * 1024));
switch (clk_sel) {
case 0:
ret_val = decode_pll(mxc_plls[PLL1_CLOCK],
- CONFIG_MX51_HCLK_FREQ) /
+ CONFIG_SYS_MX5_HCLK) /
((pre_pdf + 1) * (pdf + 1));
break;
case 1:
ret_val = decode_pll(mxc_plls[PLL2_CLOCK],
- CONFIG_MX51_HCLK_FREQ) /
+ CONFIG_SYS_MX5_HCLK) /
((pre_pdf + 1) * (pdf + 1));
break;
case 2:
ret_val = decode_pll(mxc_plls[PLL3_CLOCK],
- CONFIG_MX51_HCLK_FREQ) /
+ CONFIG_SYS_MX5_HCLK) /
((pre_pdf + 1) * (pdf + 1));
break;
default:
return imx_get_cspiclk();
case MXC_FEC_CLK:
return decode_pll(mxc_plls[PLL1_CLOCK],
- CONFIG_MX51_HCLK_FREQ);
+ CONFIG_SYS_MX5_HCLK);
default:
break;
}
/*
* Dump some core clockes.
*/
-int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
u32 freq;
- freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
- printf("mx51 pll1: %dMHz\n", freq / 1000000);
- freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ);
- printf("mx51 pll2: %dMHz\n", freq / 1000000);
- freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ);
- printf("mx51 pll3: %dMHz\n", freq / 1000000);
+ freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
+ printf("pll1: %dMHz\n", freq / 1000000);
+ freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
+ printf("pll2: %dMHz\n", freq / 1000000);
+ freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
+ printf("pll3: %dMHz\n", freq / 1000000);
printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK));
printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK));
/***************************************************/
U_BOOT_CMD(
- clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx51_showclocks,
- "display mx51 clocks\n",
+ clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks,
+ "display clocks\n",
""
);
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
#include <fsl_esdhc.h>
#endif
+#if defined(CONFIG_MX51)
+#define CPU_TYPE 0x51000
+#else
+#error "CPU_TYPE not defined"
+#endif
+
u32 get_cpu_rev(void)
{
- int reg;
- int system_rev;
+ int system_rev = CPU_TYPE;
+ int reg = __raw_readl(ROM_SI_REV);
- reg = __raw_readl(ROM_SI_REV);
switch (reg) {
case 0x02:
- system_rev = 0x51000 | CHIP_REV_1_1;
+ system_rev |= CHIP_REV_1_1;
break;
case 0x10:
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
- system_rev = 0x51000 | CHIP_REV_2_5;
+ system_rev |= CHIP_REV_2_5;
else
- system_rev = 0x51000 | CHIP_REV_2_0;
+ system_rev |= CHIP_REV_2_0;
break;
case 0x20:
- system_rev = 0x51000 | CHIP_REV_3_0;
+ system_rev |= CHIP_REV_3_0;
break;
return system_rev;
default:
- system_rev = 0x51000 | CHIP_REV_1_0;
+ system_rev |= CHIP_REV_1_0;
break;
}
return system_rev;
u32 cpurev;
cpurev = get_cpu_rev();
- printf("CPU: Freescale i.MX51 family rev%d.%d at %d MHz\n",
- (cpurev & 0xF0) >> 4,
- (cpurev & 0x0F) >> 4,
+ printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n",
+ (cpurev & 0xFF000) >> 12,
+ (cpurev & 0x000F0) >> 4,
+ (cpurev & 0x0000F) >> 0,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
return 0;
}
void reset_timer_masked(void)
{
ulong val = __raw_readl(&cur_gpt->counter);
- lastinc = val / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ);
+ lastinc = val / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
timestamp = 0;
}
ulong get_timer_masked(void)
{
ulong val = __raw_readl(&cur_gpt->counter);
- val /= (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ);
+ val /= (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
if (val >= lastinc)
timestamp += (val - lastinc);
else
- timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ))
+ timestamp += ((0xFFFFFFFF / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ))
- lastinc) + val;
lastinc = val;
return timestamp;
void __udelay(unsigned long usec)
{
unsigned long now, start, tmo;
- tmo = usec * (CONFIG_MX51_CLK32 / 1000) / 1000;
+ tmo = usec * (CONFIG_SYS_MX5_CLK32 / 1000) / 1000;
if (!tmo)
tmo = 1;
* MA 02111-1307 USA
*/
-#ifndef __MACH_MX51_IOMUX_H__
-#define __MACH_MX51_IOMUX_H__
+#ifndef __MACH_MX5_IOMUX_H__
+#define __MACH_MX5_IOMUX_H__
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
typedef unsigned int iomux_pin_name_t;
unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin);
void mxc_iomux_set_input(iomux_input_select_t input, u32 config);
-#endif /* __MACH_MX51_IOMUX_H__ */
+#endif /* __MACH_MX5_IOMUX_H__ */
* MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_MXC_MX51_PINS_H__
-#define __ASM_ARCH_MXC_MX51_PINS_H__
+#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__
+#define __ASM_ARCH_MX5_MX5X_PINS_H__
#ifndef __ASSEMBLY__
};
#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_MX51_PINS_H__ */
+#endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <mxc_gpio.h>
jadecpu arm arm926ejs jadecpu syteco mb86r0x
suen3 arm arm926ejs km_arm keymile kirkwood
rd6281a arm arm926ejs - Marvell kirkwood
-mx51evk arm armv7 mx51evk freescale mx51
-vision2 arm armv7 vision2 ttcontrol mx51
+mx51evk arm armv7 mx51evk freescale mx5
+vision2 arm armv7 vision2 ttcontrol mx5
actux1 arm ixp
actux2 arm ixp
actux3 arm ixp
#define CONFIG_MX51 /* in a mx51 */
#define CONFIG_SKIP_RELOCATE_UBOOT
-#define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */
-#define CONFIG_MX51_CLK32 32768
+#define CONFIG_SYS_MX5_HCLK 24000000
+#define CONFIG_SYS_MX5_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MX51 /* in a mx51 */
#define CONFIG_L2_OFF
-#define CONFIG_MX51_HCLK_FREQ 24000000
-#define CONFIG_MX51_CLK32 32768
+#define CONFIG_SYS_MX5_HCLK 24000000
+#define CONFIG_SYS_MX5_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO