include/configs: ls1012aqds: add default environment variable

This adds default environment variable for ls1012aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index df2a613eaf390cf39da8c402e037f0d5d3744842..c4c9b7f5019fd0219f81f6c9759f0bec00f3d770 100644 (file)
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -102,5 +102,67 @@
 
 #define CONFIG_PCI_SCAN_SHOW
 
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "verify=no\0"                           \
+       "fdt_addr=0x00f00000\0"                 \
+       "kernel_addr=0x01000000\0"              \
+       "kernelheader_addr=0x600000\0"          \
+       "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x96000000\0"            \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "kernelheader_size=0x40000\0"           \
+       "console=ttyS0,115200\0"                \
+       BOOTENV                                 \
+       "boot_scripts=ls1012aqds_boot.scr\0"    \
+       "boot_script_hdr=hdr_ls1012aqds_bs.out\0"       \
+       "scan_dev_for_boot_part="               \
+            "part list ${devtype} ${devnum} devplist; "        \
+            "env exists devplist || setenv devplist 1; "       \
+            "for distro_bootpart in ${devplist}; do "          \
+                 "if fstype ${devtype} "                       \
+                     "${devnum}:${distro_bootpart} "           \
+                     "bootfstype; then "                       \
+                     "run scan_dev_for_boot; " \
+                 "fi; "                        \
+             "done\0"                          \
+       "scan_dev_for_boot="                              \
+               "echo Scanning ${devtype} "               \
+                               "${devnum}:${distro_bootpart}...; "  \
+               "for prefix in ${boot_prefixes}; do "     \
+                       "run scan_dev_for_scripts; "      \
+               "done;"                                   \
+               "\0"                                      \
+       "boot_a_script="                                  \
+               "load ${devtype} ${devnum}:${distro_bootpart} "  \
+                       "${scriptaddr} ${prefix}${script}; "    \
+               "env exists secureboot && load ${devtype} "     \
+                       "${devnum}:${distro_bootpart} "         \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+                       "env exists secureboot "        \
+                       "&& esbc_validate ${scripthdraddr};"    \
+               "source ${scriptaddr}\0"          \
+       "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
+               "sf probe 0:0 && sf read $load_addr "   \
+               "$kernel_addr $kernel_size; env exists secureboot "     \
+               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                            "env exists secureboot && esbc_halt;"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                          "env exists secureboot && esbc_halt;"
+#endif
+
 #include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */