cmd_i2c.c: sorted commands alphabetically

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 11ed511bb76acc0edd1e9ce2f917edfd2ee84a85..b51d0c91c504277c627690603e521840c251306d 100644 (file)
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1302,25 +1302,24 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        i2c, 6, 1, do_i2c,
        "I2C sub-system",
-       "speed [speed] - show or set I2C bus speed\n"
 #if defined(CONFIG_I2C_MUX)
-       "i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\n"
+       "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
 #endif  /* CONFIG_I2C_MUX */
+       "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
 #if defined(CONFIG_I2C_MULTI_BUS)
        "i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
+       "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
        "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
        "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
        "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
        "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
-       "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
        "i2c probe - show devices on the I2C bus\n"
        "i2c reset - re-init the I2C Controller\n"
-       "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
 #if defined(CONFIG_CMD_SDRAM)
-       "\n"
-       "i2c sdram chip - print SDRAM configuration information"
+       "i2c sdram chip - print SDRAM configuration information\n"
 #endif
+       "i2c speed [speed] - show or set I2C bus speed"
 );
 
 #if defined(CONFIG_I2C_MUX)