ppc4xx: Add freqUART to CPU speed detection

This value is needed later for the device tree configuration of
the uart clock.

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index 2acb250e055ce9e3adb64c814b9d972c3838cff7..44e95a5a91a86cce8c72cd86061863863b405da4 100644 (file)
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -79,10 +79,17 @@ static void do_fixup_uart(void *fdt, int offset, int i, bd_t *bd)
 {
        int rc;
        u32 val;
+       PPC4xx_SYS_INFO sys_info;
+
+       get_sys_info(&sys_info);
 
        debug("Updating node UART%d\n", i);
 
+#if defined(CFG_EXT_SERIAL_CLOCK)
        val = cpu_to_fdt32(CFG_EXT_SERIAL_CLOCK);
+#else
+       val = cpu_to_fdt32(sys_info.freqUART);
+#endif
        rc = fdt_setprop(fdt, offset, "clock-frequency", &val, 4);
        if (rc)
                printf("Unable to update node UART, err=%s\n", fdt_strerror(rc));

diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 26182dabf01b67fb751bc0d58af9c3c2603638aa..90066142de142aa7e8bb609f04ec263ef85e4348 100644 (file)
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -162,6 +162,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
                        sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
                }
        }
+
+       sysInfo->freqUART = sysInfo->freqProcessor;
 }
 
 
@@ -265,6 +267,7 @@ void get_sys_info (sys_info_t *sysInfo)
        sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
        sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
        sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+       sysInfo->freqUART = sysInfo->freqPLB;
 
        /* Figure which timer source to use */
        if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
@@ -277,6 +280,7 @@ void get_sys_info (sys_info_t *sysInfo)
        else  /* Internal clock */
                sysInfo->freqTmrClk = sysInfo->freqProcessor;
 }
+
 /********************************************
  * get_PCI_freq
  * return PCI bus freq in Hz
@@ -318,7 +322,7 @@ void get_sys_info (sys_info_t * sysInfo)
                sysInfo->freqPLB >>= 1;
        sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
        sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
+       sysInfo->freqUART = sysInfo->freqPLB;
 }
 #else
 void get_sys_info (sys_info_t * sysInfo)
@@ -403,7 +407,7 @@ void get_sys_info (sys_info_t * sysInfo)
        sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
 #endif
 
-
+       sysInfo->freqUART = sysInfo->freqPLB;
 }
 
 #endif
@@ -632,7 +636,8 @@ extern void get_sys_info (sys_info_t * sysInfo);
 extern ulong get_PCI_freq (void);
 
 #elif defined(CONFIG_AP1000)
-void get_sys_info (sys_info_t * sysInfo) {
+void get_sys_info (sys_info_t * sysInfo)
+{
        sysInfo->freqProcessor = 240 * 1000 * 1000;
        sysInfo->freqPLB = 80 * 1000 * 1000;
        sysInfo->freqPCI = 33 * 1000 * 1000;
@@ -640,13 +645,12 @@ void get_sys_info (sys_info_t * sysInfo) {
 
 #elif defined(CONFIG_405)
 
-void get_sys_info (sys_info_t * sysInfo) {
-
+void get_sys_info (sys_info_t * sysInfo)
+{
        sysInfo->freqVCOMhz=3125000;
        sysInfo->freqProcessor=12*1000*1000;
        sysInfo->freqPLB=50*1000*1000;
        sysInfo->freqPCI=66*1000*1000;
-
 }
 
 #elif defined(CONFIG_405EP)
@@ -678,9 +682,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
         * Determine FBK_DIV.
         */
        sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
-       if (sysInfo->pllFbkDiv == 0) {
+       if (sysInfo->pllFbkDiv == 0)
                sysInfo->pllFbkDiv = 16;
-       }
 
        /*
         * Determine PLB_DIV.
@@ -735,6 +738,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
        sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
 
        sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+
+       sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
 }
 
 
@@ -808,6 +813,7 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
         * Read CPR_PRIMAD register
         */
        mfcpr(cprprimad, cpr_primad);
+
        /*
         * Determine PLB_DIV.
         */
@@ -861,6 +867,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 
        sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
                sysInfo->pllExtBusDiv;
+
+       sysInfo->freqUART = sysInfo->freqVCOHz;
 }
 
 /********************************************
@@ -1022,6 +1030,7 @@ void get_sys_info (sys_info_t * sysInfo)
        sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
        sysInfo->freqDDR = sysInfo->freqPLB;
        sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+       sysInfo->freqUART = sysInfo->freqPLB;
 }
 
 /********************************************