arm: kirkwood: iConnect : Add Ethernet support

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Miscellaneous changes: Move constants to .c file and remove header file
board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
and cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index 9e123aab0023972d9d593c0e55a83e380dfa86f8..0387160200190c35a6acad7f0097c0c6dde30204 100644 (file)
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
  * Copyright (C) 2009-2012
  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
  * Luka Perkov <luka@openwrt.org>
@@ -7,15 +8,20 @@
 
 #include <common.h>
 #include <init.h>
-#include <miiphy.h>
+#include <netdev.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include <asm/global_data.h>
-#include "iconnect.h"
+#include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define ICONNECT_OE_LOW                 (~BIT(7))
+#define ICONNECT_OE_HIGH                (~BIT(10))
+#define ICONNECT_OE_VAL_LOW             (0)
+#define ICONNECT_OE_VAL_HIGH            BIT(10)
+
 int board_early_init_f(void)
 {
        /*
@@ -85,9 +91,14 @@ int board_early_init_f(void)
        return 0;
 }
 
+int board_eth_init(struct bd_info *bis)
+{
+       return cpu_eth_init(bis);
+}
+
 int board_init(void)
 {
-       /* adress of boot parameters */
+       /* address of boot parameters */
        gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
        return 0;

diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
deleted file mode 100644 (file)
index 4f0be71..0000000
--- a/board/iomega/iconnect/iconnect.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009-2012
- * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <luka@openwrt.org>
- */
-
-#ifndef __ICONNECT_H
-#define __ICONNECT_H
-
-#define ICONNECT_OE_LOW                        (~(1 << 7))
-#define ICONNECT_OE_HIGH               (~(1 << 10))
-#define ICONNECT_OE_VAL_LOW            (0)
-#define ICONNECT_OE_VAL_HIGH           (1 << 10)
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG                10
-#define MV88E1116_CPRSP_CR3_REG                21
-#define MV88E1116_MAC_CTRL_REG         21
-#define MV88E1116_PGADR_REG            22
-#define MV88E1116_RGMII_TXTM_CTRL      (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL      (1 << 5)
-
-#endif /* __ICONNECT_H */

diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
index 1c9c77a2926bebd2fdfe77bcdd941406584f348f..336fae270af7da96f134b2fa011b6a85c6b69f23 100644 (file)
--- a/configs/iconnect_defconfig
+++ b/configs/iconnect_defconfig
@@ -20,7 +20,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_LATE_INIT=y
-CONFIG_SYS_PROMPT="iconnect => "
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="iConnect> "
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
@@ -39,11 +40,14 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
 CONFIG_PCI=y

diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
index f1aad1efde64f4a86cb65661a7681c594376190c..44a4b4409f9e3a9aaff979a750370cb39ad67b0e 100644 (file)
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
  * (C) Copyright 2009-2012
  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
  * Luka Perkov <luka@openwrt.org>
@@ -10,32 +11,24 @@
 
 #include "mv-common.h"
 
-/*
- * Environment variables configuration
- */
-
-/*
- * Default environment variables
- */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "console=console=ttyS0,115200\0"        \
        "mtdids=nand0=orion_nand\0"             \
-       "mtdparts="CONFIG_MTDPARTS_DEFAULT      \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT     \
        "kernel=/boot/uImage\0"                 \
        "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
 
 /*
  * Ethernet driver configuration
+ *
+ * This board has PCIe Wifi card, so allow Ethernet to be disabled
  */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR    11
-#undef CONFIG_RESET_PHY_R
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 #endif /* CONFIG_CMD_NET */
 
-/*
- * File system
- */
-
 #endif /* _CONFIG_ICONNECT_H */