--- /dev/null
+/*
+ * clock.c
+ *
+ * clocks for AM33XX based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#define PRCM_MOD_EN 0x2
+#define PRCM_FORCE_WAKEUP 0x2
+
+#define PRCM_EMIF_CLK_ACTIVITY BIT(2)
+#define PRCM_L3_GCLK_ACTIVITY BIT(4)
+
+#define PLL_BYPASS_MODE 0x4
+#define ST_MN_BYPASS 0x00000100
+#define ST_DPLL_CLK 0x00000001
+#define CLK_SEL_MASK 0x7ffff
+#define CLK_DIV_MASK 0x1f
+#define CLK_DIV2_MASK 0x7f
+#define CLK_SEL_SHIFT 0x8
+#define CLK_MODE_SEL 0x7
+#define CLK_MODE_MASK 0xfffffff8
+#define CLK_DIV_SEL 0xFFFFFFE0
+
+
+const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
+const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
+const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
+
+static void enable_interface_clocks(void)
+{
+ /* Enable all the Interconnect Modules */
+ writel(PRCM_MOD_EN, &cmper->l3clkctrl);
+ while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmper->l4lsclkctrl);
+ while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmper->l4fwclkctrl);
+ while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl);
+ while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmper->l3instrclkctrl);
+ while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmper->l4hsclkctrl);
+ while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN)
+ ;
+}
+
+/*
+ * Force power domain wake up transition
+ * Ensure that the corresponding interface clock is active before
+ * using the peripheral
+ */
+static void power_domain_wkup_transition(void)
+{
+ writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl);
+ writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl);
+ writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl);
+ writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl);
+ writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl);
+}
+
+/*
+ * Enable the peripheral clock for required peripherals
+ */
+static void enable_per_clocks(void)
+{
+ /* Enable the control module though RBL would have done it*/
+ writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl);
+ while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN)
+ ;
+
+ /* Enable the module clock */
+ writel(PRCM_MOD_EN, &cmper->timer2clkctrl);
+ while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN)
+ ;
+
+ /* UART0 */
+ writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl);
+ while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
+ ;
+}
+
+static void mpu_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = readl(&cmwkup->clkmoddpllmpu);
+ clksel = readl(&cmwkup->clkseldpllmpu);
+ div_m2 = readl(&cmwkup->divm2dpllmpu);
+
+ /* Set the PLL to bypass Mode */
+ writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu);
+ while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS)
+ ;
+
+ clksel = clksel & (~CLK_SEL_MASK);
+ clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N);
+ writel(clksel, &cmwkup->clkseldpllmpu);
+
+ div_m2 = div_m2 & ~CLK_DIV_MASK;
+ div_m2 = div_m2 | MPUPLL_M2;
+ writel(div_m2, &cmwkup->divm2dpllmpu);
+
+ clkmode = clkmode | CLK_MODE_SEL;
+ writel(clkmode, &cmwkup->clkmoddpllmpu);
+
+ while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK)
+ ;
+}
+
+static void core_pll_config(void)
+{
+ u32 clkmode, clksel, div_m4, div_m5, div_m6;
+
+ clkmode = readl(&cmwkup->clkmoddpllcore);
+ clksel = readl(&cmwkup->clkseldpllcore);
+ div_m4 = readl(&cmwkup->divm4dpllcore);
+ div_m5 = readl(&cmwkup->divm5dpllcore);
+ div_m6 = readl(&cmwkup->divm6dpllcore);
+
+ /* Set the PLL to bypass Mode */
+ writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore);
+
+ while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS)
+ ;
+
+ clksel = clksel & (~CLK_SEL_MASK);
+ clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N);
+ writel(clksel, &cmwkup->clkseldpllcore);
+
+ div_m4 = div_m4 & ~CLK_DIV_MASK;
+ div_m4 = div_m4 | COREPLL_M4;
+ writel(div_m4, &cmwkup->divm4dpllcore);
+
+ div_m5 = div_m5 & ~CLK_DIV_MASK;
+ div_m5 = div_m5 | COREPLL_M5;
+ writel(div_m5, &cmwkup->divm5dpllcore);
+
+ div_m6 = div_m6 & ~CLK_DIV_MASK;
+ div_m6 = div_m6 | COREPLL_M6;
+ writel(div_m6, &cmwkup->divm6dpllcore);
+
+ clkmode = clkmode | CLK_MODE_SEL;
+ writel(clkmode, &cmwkup->clkmoddpllcore);
+
+ while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK)
+ ;
+}
+
+static void per_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = readl(&cmwkup->clkmoddpllper);
+ clksel = readl(&cmwkup->clkseldpllper);
+ div_m2 = readl(&cmwkup->divm2dpllper);
+
+ /* Set the PLL to bypass Mode */
+ writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper);
+
+ while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS)
+ ;
+
+ clksel = clksel & (~CLK_SEL_MASK);
+ clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N);
+ writel(clksel, &cmwkup->clkseldpllper);
+
+ div_m2 = div_m2 & ~CLK_DIV2_MASK;
+ div_m2 = div_m2 | PERPLL_M2;
+ writel(div_m2, &cmwkup->divm2dpllper);
+
+ clkmode = clkmode | CLK_MODE_SEL;
+ writel(clkmode, &cmwkup->clkmoddpllper);
+
+ while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
+ ;
+}
+
+static void ddr_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = readl(&cmwkup->clkmoddpllddr);
+ clksel = readl(&cmwkup->clkseldpllddr);
+ div_m2 = readl(&cmwkup->divm2dpllddr);
+
+ /* Set the PLL to bypass Mode */
+ clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE;
+ writel(clkmode, &cmwkup->clkmoddpllddr);
+
+ /* Wait till bypass mode is enabled */
+ while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS)
+ != ST_MN_BYPASS)
+ ;
+
+ clksel = clksel & (~CLK_SEL_MASK);
+ clksel = clksel | ((DDRPLL_M << CLK_SEL_SHIFT) | DDRPLL_N);
+ writel(clksel, &cmwkup->clkseldpllddr);
+
+ div_m2 = div_m2 & CLK_DIV_SEL;
+ div_m2 = div_m2 | DDRPLL_M2;
+ writel(div_m2, &cmwkup->divm2dpllddr);
+
+ clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL;
+ writel(clkmode, &cmwkup->clkmoddpllddr);
+
+ /* Wait till dpll is locked */
+ while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK)
+ ;
+}
+
+void enable_emif_clocks(void)
+{
+ /* Enable the EMIF_FW Functional clock */
+ writel(PRCM_MOD_EN, &cmper->emiffwclkctrl);
+ /* Enable EMIF0 Clock */
+ writel(PRCM_MOD_EN, &cmper->emifclkctrl);
+ /* Poll for emif_gclk & L3_G clock are active */
+ while ((readl(&cmper->l3clkstctrl) & (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY)) != (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY))
+ ;
+ /* Poll if module is functional */
+ while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN)
+ ;
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void pll_init()
+{
+ mpu_pll_config();
+ core_pll_config();
+ per_pll_config();
+ ddr_pll_config();
+
+ /* Enable the required interconnect clocks */
+ enable_interface_clocks();
+
+ /* Power domain wake up transition */
+ power_domain_wkup_transition();
+
+ /* Enable the required peripherals */
+ enable_per_clocks();
+}
projects / u-boot.git / commitdiff