misc: microchip_flexcom: introduce microchip_flexcom driver

The Microchip Flexcom is just a wrapper which embeds a SPI controller,
an I2C controller and an USART.
Only one function can be used at a time and is chosen at boot time according
to the device tree.
The bindings are kept as in Linux.
The driver registers to MISC_UCLASS.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index ba50893b432e42b0a963861f2d51261e3a990f3b..4985ea033b1514c13278a1c27def09661d39aa2e 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -412,4 +412,13 @@ config IHS_FPGA
          by the devices. This driver supports both CON and CPU variants of the
          devices, depending on the device tree entry.
 
+config MICROCHIP_FLEXCOM
+       bool "Enable Microchip Flexcom driver"
+       depends on MISC
+       help
+         The Atmel Flexcom is just a wrapper which embeds a SPI controller,
+         an I2C controller and an USART.
+         Only one function can be used at a time and is chosen at boot time
+         according to the device tree.
+
 endmenu

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 0001d105baee00870d5fe47edce1dd3212424e01..f61263640b84625cb6aefd7ede6b12f4b3791c45 100644 (file)
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -65,3 +65,4 @@ obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
 obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress_config.o
 obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
 obj-$(CONFIG_JZ4780_EFUSE) += jz4780_efuse.o
+obj-$(CONFIG_MICROCHIP_FLEXCOM) += microchip_flexcom.o

diff --git a/drivers/misc/microchip_flexcom.c b/drivers/misc/microchip_flexcom.c
new file mode 100644 (file)
index 0000000..1bc19ed
--- /dev/null
+++ b/drivers/misc/microchip_flexcom.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019, Microchip Technology, Inc.
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <misc.h>
+#include <asm/io.h>
+
+struct microchip_flexcom_regs {
+       u32 cr;
+};
+
+struct microchip_flexcom_platdata {
+       struct microchip_flexcom_regs *regs;
+       u32 flexcom_mode;
+};
+
+static int microchip_flexcom_ofdata_to_platdata(struct udevice *dev)
+{
+       struct microchip_flexcom_platdata *plat = dev_get_platdata(dev);
+       int ret;
+
+       plat->regs = map_physmem(devfdt_get_addr(dev),
+                                sizeof(struct microchip_flexcom_regs),
+                               MAP_NOCACHE);
+
+       ret = dev_read_u32(dev, "atmel,flexcom-mode", &plat->flexcom_mode);
+
+       if (IS_ERR_VALUE(ret)) {
+               debug("Missing atmel,flexcom-mode property\n");
+               return ret;
+       }
+
+       /*
+        * The mode must have only 2 bits. If any other bits are set,
+        * the value is not supported.
+        */
+       if (plat->flexcom_mode & 0xfffffffc) {
+               debug("Wrong atmel,flexcom-mode property\n");
+               return -EINVAL;
+       }
+
+       writel(plat->flexcom_mode, &plat->regs->cr);
+
+       return 0;
+}
+
+static const struct udevice_id microchip_flexcom_ids[] = {
+       { .compatible = "atmel,sama5d2-flexcom" },
+       { .compatible = "microchip,flexcom" },
+       {}
+};
+
+U_BOOT_DRIVER(microchip_flexcom) = {
+       .name   = "microchip_flexcom",
+       .id     = UCLASS_MISC,
+       .of_match = microchip_flexcom_ids,
+       .ofdata_to_platdata = microchip_flexcom_ofdata_to_platdata,
+       .platdata_auto_alloc_size = sizeof(struct microchip_flexcom_platdata),
+};