*/
#include <common.h>
+#include <dm.h>
#include <mpc8xx.h>
+#include <spi.h>
+
#include <asm/cpm_8xx.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <serial.h>
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0xb00 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
-#endif
+#include <asm/io.h>
#define CPM_SPI_BASE_RX CPM_SPI_BASE
#define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t))
-/* -------------------
- * Function prototypes
- * ------------------- */
-ssize_t spi_xfer(size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
#define MAX_BUFFER 0x104
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f(void)
+static int mpc8xx_spi_probe(struct udevice *dev)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
cpm8xx_t __iomem *cp = &immr->im_cpm;
clrbits_be16(&tbdf->cbd_sc, BD_SC_READY);
clrbits_be16(&rbdf->cbd_sc, BD_SC_EMPTY);
- /* Set the bd's rx and tx buffer address pointers */
- out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf);
- out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf);
-
/* 10 + 11 */
out_8(&cp->cp_spim, 0); /* Mask all SPI events */
out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */
- return;
+ return 0;
}
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r(void)
+static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
cpm8xx_t __iomem *cp = &immr->im_cpm;
- spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI];
- cbd_t __iomem *tbdf, *rbdf;
-
- /* Disable relocation */
- out_be16(&spi->spi_rpbase, 0);
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX];
- rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *)malloc(MAX_BUFFER);
- txbuf = (uchar *)malloc(MAX_BUFFER);
-
- out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf);
- out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf);
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1))
- break;
- udelay(1000);
- }
- if (i >= 1000)
- printf("*** spi_write: Time out while writing!\n");
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer(size_t count)
-{
- immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
- cpm8xx_t __iomem *cp = &immr->im_cpm;
- spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI];
cbd_t __iomem *tbdf, *rbdf;
int tm;
+ size_t count = (bitlen + 7) / 8;
- /* Disable relocation */
- out_be16(&spi->spi_rpbase, 0);
+ if (count > MAX_BUFFER)
+ return -EINVAL;
tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX];
rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
clrbits_be32(&cp->cp_pbdat, 0x0001);
/* Setting tx bd status and data length */
+ out_be32(&tbdf->cbd_bufaddr, (ulong)dout);
out_be16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_LAST | BD_SC_WRAP);
out_be16(&tbdf->cbd_datlen, count);
/* Setting rx bd status and data length */
+ out_be32(&rbdf->cbd_bufaddr, (ulong)din);
out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_WRAP);
out_be16(&rbdf->cbd_datlen, 0); /* rx length has no significance */
return count;
}
+
+static const struct dm_spi_ops mpc8xx_spi_ops = {
+ .xfer = mpc8xx_spi_xfer,
+};
+
+static const struct udevice_id mpc8xx_spi_ids[] = {
+ { .compatible = "fsl,mpc8xx-spi" },
+ { }
+};
+
+U_BOOT_DRIVER(mpc8xx_spi) = {
+ .name = "mpc8xx_spi",
+ .id = UCLASS_SPI,
+ .of_match = mpc8xx_spi_ids,
+ .ops = &mpc8xx_spi_ops,
+ .probe = mpc8xx_spi_probe,
+};
projects / u-boot.git / commitdiff