--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include "rk3588-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+ };
+};
+
+&emmc_pwrseq {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&emmc_reset {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sdhci {
+ /* U-Boot currently cannot handle anything below HS200 for eMMC on RK3588 */
+ /delete-property/ mmc-ddr-1_8v;
+ /delete-property/ cap-mmc-highspeed;
+};
+
+&uart2m2_xfer {
+ bootph-all;
+};
Pine64 QuartzPro64 is a Rockchip RK3588 based SBC (Single Board
Computer) by Pine64.
+config TARGET_TIGER_RK3588
+ bool "Theobroma Systems SOM-RK3588-Q7 (Tiger)"
+ select BOARD_LATE_INIT
+ help
+ The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
+ connector) system-on-module from Theobroma Systems, featuring the
+ Rockchip RK3588.
+
+ It provides the following feature set:
+ * up to 16GB LPDDR4x
+ * on-module eMMC
+ * SD card (on a baseboard) via edge connector
+ * Gigabit Ethernet with on-module GbE PHY
+ * HDMI/eDP
+ * MIPI-DSI
+ * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
+ * HDMI input over FPC connector
+ * CAN
+ * USB
+ - 1x USB 3.0 dual-role (direct connection)
+ - 2x USB 3.0 host + 1x USB 2.0 host
+ * PCIe
+ - 1x PCIe 2.1 Gen3, 4 lanes
+ - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
+ * on-module ATtiny816 companion controller, implementing:
+ - low-power RTC functionality (ISL1208 emulation)
+ - fan controller (AMC6821 emulation)
+ * on-module Secure Element with Global Platform 2.2.1 compliant
+ JavaCard environment
+
config TARGET_TURINGRK1_RK3588
bool "Turing Machines RK1 RK3588 board"
select BOARD_LATE_INIT
source "board/rockchip/evb_rk3588/Kconfig"
source "board/rockchip/toybrick_rk3588/Kconfig"
source "board/theobroma-systems/jaguar_rk3588/Kconfig"
+source "board/theobroma-systems/tiger_rk3588/Kconfig"
endif
--- /dev/null
+if TARGET_TIGER_RK3588
+
+config SYS_BOARD
+ default "tiger_rk3588"
+
+config SYS_VENDOR
+ default "theobroma-systems"
+
+config SYS_CONFIG_NAME
+ default "tiger_rk3588"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ENV_IS_NOWHERE
+
+endif
--- /dev/null
+TIGER-RK3588 (SOM-RK3588-Q7)
+M: Klaus Goger <klaus.goger@cherry.de>
+M: Quentin Schulz <quentin.schulz@cherry.de>
+M: Heiko Stuebner <heiko.stuebner@cherry.de>
+S: Maintained
+F: board/theobroma-systems/tiger_rk3588
+F: board/theobroma-systems/common
+F: doc/board/theobroma-systems/
+F: include/configs/tiger_rk3588.h
+F: arch/arm/dts/rk3588-tiger*
+F: configs/tiger-rk3588_defconfig
+W: https://embedded.cherry.de/product/tiger-som-rk3588-q7/
+T: git git://git.embedded.cherry.de/tiger-u-boot.git
--- /dev/null
+#
+# Copyright (c) 2024 Theobroma Systems Design und Consulting GmbH
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += tiger_rk3588.o
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-y += ../common/common.o
+endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <phy.h>
+#include <eth_phy.h>
+
+#include <asm/types.h>
+#include <asm/arch-rockchip/cru_rk3588.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/ioc_rk3588.h>
+#include <asm-generic/u-boot.h>
+#include <dm/device.h>
+#include <dm/uclass-id.h>
+#include <linux/bitfield.h>
+
+#include "../common/common.h"
+
+#define GPIO2C3_SEL_MASK GENMASK(15, 12)
+#define GPIO2C3_ETH0_REFCLKO_25M FIELD_PREP(GPIO2C3_SEL_MASK, 1)
+
+#define REFCLKO25M_ETH0_OUT_SEL_MASK BIT(15)
+#define REFCLKO25M_ETH0_OUT_SEL_CPLL FIELD_PREP(REFCLKO25M_ETH0_OUT_SEL_MASK, 1)
+#define REFCLKO25M_ETH0_OUT_DIV_MASK GENMASK(14, 8)
+#define REFCLKO25M_ETH0_OUT_DIV(x) FIELD_PREP(REFCLKO25M_ETH0_OUT_DIV_MASK, (x) - 1)
+
+#define REFCLKO25M_ETH0_OUT_EN BIT(4)
+
+void setup_eth0refclko(void)
+{
+ /* Configure and enable ETH0_REFCLKO_25MHz */
+ static struct rk3588_bus_ioc * const bus_ioc = (void *)BUS_IOC_BASE;
+ static struct rk3588_cru * const cru = (void *)CRU_BASE;
+
+ /* 1. Pinmux */
+ rk_clrsetreg(&bus_ioc->gpio2c_iomux_sel_l, GPIO2C3_SEL_MASK, GPIO2C3_ETH0_REFCLKO_25M);
+ /* 2. Parent clock selection + divider => CPLL (1.5GHz) / 60 => 25MHz */
+ rk_clrsetreg(&cru->clksel_con[15],
+ REFCLKO25M_ETH0_OUT_SEL_MASK | REFCLKO25M_ETH0_OUT_DIV_MASK,
+ REFCLKO25M_ETH0_OUT_SEL_CPLL | REFCLKO25M_ETH0_OUT_DIV(60));
+ /* 3. Enable clock */
+ rk_clrreg(&cru->clkgate_con[5], REFCLKO25M_ETH0_OUT_EN);
+}
+
+int rockchip_early_misc_init_r(void)
+{
+ setup_boottargets();
+
+ setup_eth0refclko();
+
+ return 0;
+}
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_GPIO=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-tiger-haikou"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_TIGER_RK3588=y
+CONFIG_DEBUG_UART_BASE=0xfeb50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+# CONFIG_DEBUG_UART_BOARD_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_BOOTMETH_VBE is not set
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-tiger-haikou.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CYCLIC=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SF is not set
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MII is not set
+# CONFIG_CMD_BLOCK_CACHE is not set
+# CONFIG_CMD_EFICONFIG is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EROFS=y
+CONFIG_CMD_SQUASHFS=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+# CONFIG_OF_TAG_MIGRATE is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_GPIO=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+# CONFIG_SPI_FLASH is not set
+CONFIG_SF_DEFAULT_BUS=5
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
- Radxa ROCK 5B (rock5b-rk3588)
- Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
- Theobroma Systems RK3588-SBC Jaguar (jaguar-rk3588)
+ - Theobroma Systems SOM-RK3588-Q7 - Tiger (tiger-rk3588)
- Turing Machines RK1 (turing-rk1-rk3588)
- Xunlong Orange Pi 5 (orangepi-5-rk3588s)
- Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588)
jaguar_rk3588
puma_rk3399
ringneck_px30
+ tiger_rk3588
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+SOM-RK3588-Q7 Tiger
+===================
+
+The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
+connector) system-on-module from Theobroma Systems, featuring the
+Rockchip RK3588.
+
+It provides the following feature set:
+ * up to 16GB LPDDR4x
+ * on-module eMMC
+ * SD card (on a baseboard) via edge connector
+ * Gigabit Ethernet with on-module GbE PHY
+ * HDMI/eDP
+ * MIPI-DSI
+ * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
+ * HDMI input over FPC connector
+ * CAN
+ * USB
+ - 1x USB 3.0 dual-role (direct connection)
+ - 2x USB 3.0 host + 1x USB 2.0 host
+ * PCIe
+ - 1x PCIe 2.1 Gen3, 4 lanes
+ - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
+ * on-module ATtiny816 companion controller, implementing:
+ - low-power RTC functionality (ISL1208 emulation)
+ - fan controller (AMC6821 emulation)
+ * on-module Secure Element with Global Platform 2.2.1 compliant
+ JavaCard environment
+
+Here is the step-by-step to boot to U-Boot on SOM-RK3588-Q7 Tiger from Theobroma
+Systems.
+
+Get the TF-A and DDR init (TPL) binaries
+----------------------------------------
+
+.. prompt:: bash
+
+ git clone https://github.com/rockchip-linux/rkbin
+ cd rkbin
+ export RKBIN=$(pwd)
+ export BL31=$RKBIN/bin/rk35/rk3588_bl31_v1.38.elf
+ export ROCKCHIP_TPL=$RKBIN/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin
+ sed -i 's/^uart baudrate=.*$/uart baudrate=115200/' tools/ddrbin_param.txt
+ sed -i 's/^uart iomux=.*$/uart iomux=2/' tools/ddrbin_param.txt
+ ./tools/ddrbin_tool tools/ddrbin_param.txt "$ROCKCHIP_TPL"
+ ./tools/boot_merger RKBOOT/RK3588MINIALL.ini
+ export RKDB=$RKBIN/rk3588_spl_loader_v1.11.112.bin
+
+This will setup all required external dependencies for compiling U-Boot. This will
+be updated in the future once upstream Trusted-Firmware-A supports RK3588 or U-Boot
+gains support for open-source DRAM initialization in TPL.
+
+Build U-Boot
+------------
+
+.. prompt:: bash
+
+ cd ../u-boot
+ make CROSS_COMPILE=aarch64-linux-gnu- tiger-rk3588_defconfig all
+
+This will build ``u-boot-rockchip.bin`` which can be written to an MMC device
+(eMMC or SD card).
+
+Flash the image
+---------------
+
+Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC.
+
+SD-Card
+~~~~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip.bin of=/dev/sdX seek=64
+
+.. note::
+
+ Replace ``/dev/sdX`` to match your SD card kernel device.
+
+eMMC
+~~~~
+
+``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface
+with help of the Rockchip loader binary.
+
+To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
+micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
+``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
+back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
+(check with ``lsusb -d 2207:350b``).
+
+To flash U-Boot on the eMMC with ``rkdeveloptool``:
+
+.. prompt:: bash
+
+ git clone https://github.com/rockchip-linux/rkdeveloptool
+ cd rkdeveloptool
+ autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
+ ./rkdeveloptool db "$RKDB"
+ ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+#ifndef __TIGER_RK3588_H
+#define __TIGER_RK3588_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __TIGER_RK3588_H */
projects / u-boot.git / commitdiff