tsi108_i2c: Add i2c_init() stub function

Add the i2c_init() function so that the tsi108_i2c.c driver fits
U-Boot's standard I2C API which is utilized by cmd_i2c.c

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index fda822c52d37a026589f77000c525ace444e19f1..3829ef98f61868ac5d160347be6b4f94eb1f3caa 100644 (file)
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -41,6 +41,15 @@
 /* All functions assume that Tsi108 I2C block is the only master on the bus */
 /* I2C read helper function */
 
+void i2c_init(int speed, int slaveaddr)
+{
+       /*
+        * The TSI108 has a fixed I2C clock rate and doesn't support slave
+        * operation.  This function only exists as a stub to fit into the
+        * U-Boot I2C API.
+        */
+}
+
 static int i2c_read_byte (
                uint i2c_chan,  /* I2C channel number: 0 - main, 1 - SDC SPD */
                uchar chip_addr,/* I2C device address on the bus */