arm: dts: ls1028a: move the low-power UART nodes into /soc

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 07aeb380efb721a9a86db226be14d4459b8180c6..349c4bf862b48b93ede8df9eee0641fa234acf15 100644 (file)
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -174,66 +174,6 @@
                };
        };
 
-       lpuart0: serial@2260000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x2260000 0x0 0x1000>;
-               interrupts = <0 232 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
-       lpuart1: serial@2270000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x2270000 0x0 0x1000>;
-               interrupts = <0 233 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
-       lpuart2: serial@2280000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x2280000 0x0 0x1000>;
-               interrupts = <0 234 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
-       lpuart3: serial@2290000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x2290000 0x0 0x1000>;
-               interrupts = <0 235 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
-       lpuart4: serial@22a0000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x22a0000 0x0 0x1000>;
-               interrupts = <0 236 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
-       lpuart5: serial@22b0000 {
-               compatible = "fsl,ls1021a-lpuart";
-               reg = <0x0 0x22b0000 0x0 0x1000>;
-               interrupts = <0 237 0x4>;
-               clocks = <&sysclk>;
-               clock-names = "ipg";
-               little-endian;
-               status = "disabled";
-       };
-
        usb1: usb3@3100000 {
                compatible = "fsl,layerscape-dwc3";
                reg = <0x0 0x3100000 0x0 0x10000>;
@@ -484,5 +424,65 @@
                        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
                        status = "disabled";
                };
+
+               lpuart0: serial@2260000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x2260000 0x0 0x1000>;
+                       interrupts = <0 232 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
+
+               lpuart1: serial@2270000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x2270000 0x0 0x1000>;
+                       interrupts = <0 233 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
+
+               lpuart2: serial@2280000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x2280000 0x0 0x1000>;
+                       interrupts = <0 234 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
+
+               lpuart3: serial@2290000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x2290000 0x0 0x1000>;
+                       interrupts = <0 235 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
+
+               lpuart4: serial@22a0000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x22a0000 0x0 0x1000>;
+                       interrupts = <0 236 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
+
+               lpuart5: serial@22b0000 {
+                       compatible = "fsl,ls1021a-lpuart";
+                       reg = <0x0 0x22b0000 0x0 0x1000>;
+                       interrupts = <0 237 0x4>;
+                       clocks = <&sysclk>;
+                       clock-names = "ipg";
+                       little-endian;
+                       status = "disabled";
+               };
        };
 };