Revert "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80"

This commit moved the SPL stack into SRAM C, which worked when the SPL
set the AHB1 clock down to 100 MHz to cope with the flaky SRAM C access
from the CPU.
However booting with boot0 (and thus not using SPL at all) we still run
with a 200 MHz AHB1, so any access to SRAM C is prone to fail.
Since this commit does _not_ only affect the SPL code, but also the
U-Boot proper, we fail when booting with boot0.

As the introduction of tiny-printf reduced the size of the SPL, we
can afford to have the SPL stack in SRAM A1.

This reverts commit 1a83fb4a17d959d7b037999ab7ed7e62429abe34
and fixes booting the Pine64 when using boot0.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index f64edd4b0fe0aba46bd07e632583c7a0b75c76a3..708ab1793ea85335f05495059a3f9a48e3bd555d 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -99,7 +99,7 @@
  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE       0xA000  /* 40 KiB */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x08000 /* FIXME: 40 KiB ? */
 #else
 #define CONFIG_SYS_INIT_RAM_ADDR       0x0
 #define CONFIG_SYS_INIT_RAM_SIZE       0x8000  /* 32 KiB */
@@ -220,7 +220,8 @@
 #define CONFIG_SPL_PAD_TO              32768           /* decimal for 'dd' */
 
 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
-#define LOW_LEVEL_SRAM_STACK           0x0001A000
+/* FIXME: 40 KiB instead of 32 KiB ? */
+#define LOW_LEVEL_SRAM_STACK           0x00018000
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 #else
 /* end of 32 KiB in sram */