#include <common.h>
#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/pinctrl.h>
#include <log.h>
#include <power/pmic.h>
#include <spmi/spmi.h>
#include <asm/io.h>
+#include <stdlib.h>
#include <asm/gpio.h>
#include <linux/bitops.h>
QCOM_PMIC_QUIRK_READONLY = (1 << 0),
};
-struct qcom_gpio_bank {
+struct qcom_pmic_gpio_data {
uint32_t pid; /* Peripheral ID on SPMI bus */
bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
+ u32 pin_count;
+ struct udevice *pmic; /* Reference to pmic device for read/write */
};
-static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset,
- bool input, int value)
+/* dev can be the GPIO or pinctrl device */
+static int _qcom_gpio_set_direction(struct udevice *dev, u32 offset, bool input, int value)
{
- struct qcom_gpio_bank *priv = dev_get_priv(dev);
- uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
- uint32_t reg_ctl_val;
- ulong quirks = dev_get_driver_data(dev);
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ u32 gpio_base = plat->pid + REG_OFFSET(offset);
+ u32 reg_ctl_val;
int ret = 0;
- /* Some PMICs don't like their GPIOs being configured */
- if (quirks & QCOM_PMIC_QUIRK_READONLY)
- return 0;
-
- /* Disable the GPIO */
- ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
- REG_EN_CTL_ENABLE, 0);
- if (ret < 0)
- return ret;
-
/* Select the mode and output */
- if (priv->lv_mv_type) {
+ if (plat->lv_mv_type) {
if (input)
reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
else
reg_ctl_val = REG_CTL_MODE_INOUT | !!value;
}
- ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, reg_ctl_val);
+ ret = pmic_reg_write(plat->pmic, gpio_base + REG_CTL, reg_ctl_val);
if (ret < 0)
return ret;
- if (priv->lv_mv_type && !input) {
- ret = pmic_reg_write(dev->parent,
+ if (plat->lv_mv_type && !input) {
+ ret = pmic_reg_write(plat->pmic,
gpio_base + REG_LV_MV_OUTPUT_CTL,
!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
if (ret < 0)
return ret;
}
+ return 0;
+}
+
+static int qcom_gpio_set_direction(struct udevice *dev, unsigned int offset,
+ bool input, int value)
+{
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
+ ulong quirks = dev_get_driver_data(dev);
+ int ret = 0;
+
+ /* Some PMICs don't like their GPIOs being configured */
+ if (quirks & QCOM_PMIC_QUIRK_READONLY)
+ return 0;
+
+ /* Disable the GPIO */
+ ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
+ REG_EN_CTL_ENABLE, 0);
+ if (ret < 0)
+ return ret;
+
+ _qcom_gpio_set_direction(dev, offset, input, value);
+
/* Set the right pull (no pull) */
- ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
+ ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_PULL_CTL,
REG_DIG_PULL_NO_PU);
if (ret < 0)
return ret;
/* Configure output pin drivers if needed */
if (!input) {
/* Select the VIN - VIN0, pin is input so it doesn't matter */
- ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
+ ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_VIN_CTL,
REG_DIG_VIN_VIN0);
if (ret < 0)
return ret;
/* Set the right dig out control */
- ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
+ ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_OUT_CTL,
REG_DIG_OUT_CTL_CMOS |
REG_DIG_OUT_CTL_DRIVE_L);
if (ret < 0)
static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
{
- struct qcom_gpio_bank *priv = dev_get_priv(dev);
- uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
int reg;
- reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
+ reg = pmic_reg_read(plat->pmic, gpio_base + REG_CTL);
if (reg < 0)
return reg;
- if (priv->lv_mv_type) {
+ if (plat->lv_mv_type) {
switch (reg & REG_CTL_LV_MV_MODE_MASK) {
case REG_CTL_LV_MV_MODE_INPUT:
return GPIOF_INPUT;
static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
{
- struct qcom_gpio_bank *priv = dev_get_priv(dev);
- uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
int reg;
- reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
+ reg = pmic_reg_read(plat->pmic, gpio_base + REG_STATUS);
if (reg < 0)
return reg;
static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
- struct qcom_gpio_bank *priv = dev_get_priv(dev);
- uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
/* Set the output value of the gpio */
- if (priv->lv_mv_type)
+ if (plat->lv_mv_type)
return pmic_clrsetbits(dev->parent,
gpio_base + REG_LV_MV_OUTPUT_CTL,
REG_LV_MV_OUTPUT_CTL_MASK,
.xlate = qcom_gpio_xlate,
};
+static int qcom_gpio_bind(struct udevice *dev)
+{
+
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ ulong quirks = dev_get_driver_data(dev);
+ struct udevice *child;
+ struct driver *drv;
+ int ret;
+
+ drv = lists_driver_lookup_name("qcom_pmic_pinctrl");
+ if (!drv) {
+ log_warning("Cannot find driver '%s'\n", "qcom_pmic_pinctrl");
+ return -ENOENT;
+ }
+
+ /* Bind the GPIO driver as a child of the PMIC. */
+ ret = device_bind_with_driver_data(dev, drv,
+ dev->name,
+ quirks, dev_ofnode(dev), &child);
+ if (ret)
+ return log_msg_ret("bind", ret);
+
+ dev_set_plat(child, plat);
+
+ return 0;
+}
+
static int qcom_gpio_probe(struct udevice *dev)
{
- struct qcom_gpio_bank *priv = dev_get_priv(dev);
- int reg;
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ struct ofnode_phandle_args args;
+ int val, ret;
u64 pid;
+ plat->pmic = dev->parent;
+
pid = dev_read_addr(dev);
if (pid == FDT_ADDR_T_NONE)
return log_msg_ret("bad address", -EINVAL);
- priv->pid = pid;
+ plat->pid = pid;
/* Do a sanity check */
- reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
- if (reg != REG_TYPE_VAL)
+ val = pmic_reg_read(plat->pmic, plat->pid + REG_TYPE);
+ if (val != REG_TYPE_VAL)
return log_msg_ret("bad type", -ENXIO);
- reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
- if (reg != REG_SUBTYPE_GPIO_4CH && reg != REG_SUBTYPE_GPIOC_4CH &&
- reg != REG_SUBTYPE_GPIO_LV && reg != REG_SUBTYPE_GPIO_MV)
+ val = pmic_reg_read(plat->pmic, plat->pid + REG_SUBTYPE);
+ if (val != REG_SUBTYPE_GPIO_4CH && val != REG_SUBTYPE_GPIOC_4CH &&
+ val != REG_SUBTYPE_GPIO_LV && val != REG_SUBTYPE_GPIO_MV)
return log_msg_ret("bad subtype", -ENXIO);
- priv->lv_mv_type = reg == REG_SUBTYPE_GPIO_LV ||
- reg == REG_SUBTYPE_GPIO_MV;
-
- return 0;
-}
-
-/*
- * Parse basic GPIO count specified via the gpio-ranges property
- * as specified in Linux devicetrees
- * Returns < 0 on error, otherwise gpio count
- */
-static int qcom_gpio_of_parse_ranges(struct udevice *dev)
-{
- int ret;
- struct ofnode_phandle_args args;
+ plat->lv_mv_type = val == REG_SUBTYPE_GPIO_LV ||
+ val == REG_SUBTYPE_GPIO_MV;
+ /*
+ * Parse basic GPIO count specified via the gpio-ranges property
+ * as specified in upstream devicetrees
+ */
ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "gpio-ranges",
NULL, 3, 0, &args);
if (ret)
return log_msg_ret("gpio-ranges", ret);
- return args.args[2];
-}
-
-static int qcom_gpio_of_to_plat(struct udevice *dev)
-{
- struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
- int ret;
-
- ret = qcom_gpio_of_parse_ranges(dev);
- if (ret > 0)
- uc_priv->gpio_count = ret;
- else
- return ret;
+ plat->pin_count = args.args[2];
+ uc_priv->gpio_count = plat->pin_count;
uc_priv->bank_name = "pmic";
return 0;
.name = "qcom_pmic_gpio",
.id = UCLASS_GPIO,
.of_match = qcom_gpio_ids,
- .of_to_plat = qcom_gpio_of_to_plat,
- .probe = qcom_gpio_probe,
+ .bind = qcom_gpio_bind,
+ .probe = qcom_gpio_probe,
.ops = &qcom_gpio_ops,
- .priv_auto = sizeof(struct qcom_gpio_bank),
+ .plat_auto = sizeof(struct qcom_pmic_gpio_data),
+ .flags = DM_FLAG_ALLOC_PDATA,
};
+static const struct pinconf_param qcom_pmic_pinctrl_conf_params[] = {
+ { "output-high", PIN_CONFIG_OUTPUT_ENABLE, 1 },
+ { "output-low", PIN_CONFIG_OUTPUT, 0 },
+};
+
+static int qcom_pmic_pinctrl_get_pins_count(struct udevice *dev)
+{
+ struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+
+ return plat->pin_count;
+}
+
+static const char *qcom_pmic_pinctrl_get_pin_name(struct udevice *dev, unsigned int selector)
+{
+ static char name[8];
+
+ /* DT indexes from 1 */
+ snprintf(name, sizeof(name), "gpio%u", selector + 1);
+
+ return name;
+}
+
+static int qcom_pmic_pinctrl_pinconf_set(struct udevice *dev, unsigned int selector,
+ unsigned int param, unsigned int arg)
+{
+ /* We only support configuring the pin as an output, either low or high */
+ return _qcom_gpio_set_direction(dev, selector, false,
+ param == PIN_CONFIG_OUTPUT_ENABLE);
+}
+
+static const char *qcom_pmic_pinctrl_get_function_name(struct udevice *dev, unsigned int selector)
+{
+ if (!selector)
+ return "normal";
+ return NULL;
+}
+
+static int qcom_pmic_pinctrl_generic_get_functions_count(struct udevice *dev)
+{
+ return 1;
+}
+
+static int qcom_pmic_pinctrl_generic_pinmux_set_mux(struct udevice *dev, unsigned int selector,
+ unsigned int func_selector)
+{
+ return 0;
+}
+
+struct pinctrl_ops qcom_pmic_pinctrl_ops = {
+ .get_pins_count = qcom_pmic_pinctrl_get_pins_count,
+ .get_pin_name = qcom_pmic_pinctrl_get_pin_name,
+ .set_state = pinctrl_generic_set_state,
+ .pinconf_num_params = ARRAY_SIZE(qcom_pmic_pinctrl_conf_params),
+ .pinconf_params = qcom_pmic_pinctrl_conf_params,
+ .pinconf_set = qcom_pmic_pinctrl_pinconf_set,
+ .get_function_name = qcom_pmic_pinctrl_get_function_name,
+ .get_functions_count = qcom_pmic_pinctrl_generic_get_functions_count,
+ .pinmux_set = qcom_pmic_pinctrl_generic_pinmux_set_mux,
+};
+
+U_BOOT_DRIVER(qcom_pmic_pinctrl) = {
+ .name = "qcom_pmic_pinctrl",
+ .id = UCLASS_PINCTRL,
+ .ops = &qcom_pmic_pinctrl_ops,
+};
projects / u-boot.git / commitdiff