qcom_defconfig: enable capsule update support

Enable all the necessary options for capsule updates to work, as well as
a few additional EFI features.

Capsule updates themselves are only enabled for the RB3 Gen 2, since the
exact details on where to flash U-Boot (or how to handle multiple boot
methods) has not been finalised for other boards.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig
index 5ddc5ab3ef8cfe8f9cc09eb573c1a8130b394b43..ba26924da161b1c4b5378955185f314b05cb1006 100644 (file)
--- a/configs/qcm6490_defconfig
+++ b/configs/qcm6490_defconfig
@@ -19,3 +19,9 @@ CONFIG_TEXT_BASE=0x9fc00000
 CONFIG_REMAKE_ELF=y
 
 CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2"
+
+# Enable capsule updates
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y

diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index d98e48e4a90b5a30e29fea4ca18996e7dd832ace..30f7b1c773fae5e671aaa4fd7b4045227720f036 100644 (file)
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -21,12 +21,14 @@ CONFIG_LOG_DEFAULT_LEVEL=4
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_BUS=2
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
 # CONFIG_CMD_BIND is not set
 CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -34,6 +36,7 @@ CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CAT=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_LOG=y
 CONFIG_OF_LIVE=y
@@ -52,6 +55,9 @@ CONFIG_CLK_QCOM_SM8250=y
 CONFIG_CLK_QCOM_SM8550=y
 CONFIG_CLK_QCOM_SM8650=y
 CONFIG_CLK_QCOM_SC7280=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SCSI=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
 CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_DM_I2C=y