--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o ../common/pci.o
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+SOBJS = misc.o
+OBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
+ eth.o eth_addrtbl.o mpsc.o i2c.o \
+ sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o
+
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o m48t59y.o pci.o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+SOBJS =
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \
+ fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o
+
+AOBJS =
+
+OBJS = $(COBJS) $(AOBJS)
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CPC710_PCI_H_
+#define _CPC710_PCI_H_
+
+#define PCI_MEMORY_PHYS 0x00000000
+#define PCI_MEMORY_BUS 0x80000000
+#define PCI_MEMORY_MAXSIZE 0x20000000
+
+#define BRIDGE_CPCI_PHYS 0xff500000
+#define BRIDGE_CPCI_MEM_SIZE 0x08000000
+#define BRIDGE_CPCI_MEM_PHYS 0xf0000000
+#define BRIDGE_CPCI_MEM_BUS 0x00000000
+#define BRIDGE_CPCI_IO_SIZE 0x02000000
+#define BRIDGE_CPCI_IO_PHYS 0xfc000000
+#define BRIDGE_CPCI_IO_BUS 0x00000000
+
+#define BRIDGE_LOCAL_PHYS 0xff400000
+#define BRIDGE_LOCAL_MEM_SIZE 0x04000000
+#define BRIDGE_LOCAL_MEM_PHYS 0xf8000000
+#define BRIDGE_LOCAL_MEM_BUS 0x40000000
+#define BRIDGE_LOCAL_IO_SIZE 0x01000000
+#define BRIDGE_LOCAL_IO_PHYS 0xfe000000
+#define BRIDGE_LOCAL_IO_BUS 0x04000000
+
+#define BRIDGE(r, x) (BRIDGE_##r##_PHYS + HW_BRIDGE_##x)
+
+#define PCI_LATENCY_TIMER_VAL 0xff
+
+#endif
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.S drivers/i2c/i2c2.o
+OBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
+ drivers/epic/epic1.o drivers/i2c/i2c1.o pci.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS) drivers/i2c/i2c2.o
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+/*
+ * COM1 NS16550 support
+ * originally from linux source (arch/ppc/boot/ns16550.c)
+ * modified to use CFG_ISA_MEM and new defines
+ */
+
+#include <config.h>
+
+#ifdef CFG_NS16550
+
+#include <ns16550.h>
+
+#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
+#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
+#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
+
+void NS16550_init (NS16550_t com_port, int baud_divisor)
+{
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
+}
+
+void NS16550_reinit (NS16550_t com_port, int baud_divisor)
+{
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
+}
+
+void NS16550_putc (NS16550_t com_port, char c)
+{
+ while ((com_port->lsr & LSR_THRE) == 0);
+ com_port->thr = c;
+}
+
+char NS16550_getc (NS16550_t com_port)
+{
+ while ((com_port->lsr & LSR_DR) == 0);
+ return (com_port->rbr);
+}
+
+int NS16550_tstc (NS16550_t com_port)
+{
+ return ((com_port->lsr & LSR_DR) != 0);
+}
+
+#endif
--- /dev/null
+#ifndef _405GP_PCI_H
+#define _405GP_PCI_H
+
+/*----------------------------------------------------------------------------+
+| 405GP PCI core memory map defines.
++----------------------------------------------------------------------------*/
+#define MIN_PCI_MEMADDR1 0x80000000
+#define MIN_PCI_MEMADDR2 0x00000000
+#define MIN_PLB_PCI_IOADDR 0xE8000000 /* PLB side of PCI I/O address space */
+#define MIN_PCI_PCI_IOADDR 0x00000000 /* PCI side of PCI I/O address space */
+#define MAX_PCI_DEVICES 32
+
+/*----------------------------------------------------------------------------+
+| Defines for the 405GP PCI Config address and data registers followed by
+| defines for the standard PCI device configuration header.
++----------------------------------------------------------------------------*/
+#define PCICFGADR 0xEEC00000
+#define PCICFGDATA 0xEEC00004
+
+#define PCIBUSNUM 0x40 /* 405GP specific parameters */
+#define PCISUBBUSNUM 0x41
+#define PCIDISCOUNT 0x42
+#define PCIBRDGOPT1 0x4A
+#define PCIBRDGOPT2 0x60
+
+/*----------------------------------------------------------------------------+
+| Defines for 405GP PCI Master local configuration regs.
++----------------------------------------------------------------------------*/
+#define PMM0LA 0xEF400000
+#define PMM0MA 0xEF400004
+#define PMM0PCILA 0xEF400008
+#define PMM0PCIHA 0xEF40000C
+#define PMM1LA 0xEF400010
+#define PMM1MA 0xEF400014
+#define PMM1PCILA 0xEF400018
+#define PMM1PCIHA 0xEF40001C
+#define PMM2LA 0xEF400020
+#define PMM2MA 0xEF400024
+#define PMM2PCILA 0xEF400028
+#define PMM2PCIHA 0xEF40002C
+
+/*----------------------------------------------------------------------------+
+| Defines for 405GP PCI Target local configuration regs.
++----------------------------------------------------------------------------*/
+#define PTM1MS 0xEF400030
+#define PTM1LA 0xEF400034
+#define PTM2MS 0xEF400038
+#define PTM2LA 0xEF40003C
+
+#define PCIDEVID_405GP 0x0
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _NS87308_H_
+#define _NS87308_H_
+
+#include <asm/pci_io.h>
+
+/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty
+ functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */
+
+void initialise_ns87308(void);
+
+/*
+ * The following struct represents the GPIO registers on the NS87308/NS97307
+ */
+struct GPIO
+{
+ unsigned char dta1; /* 0 data port 1 */
+ unsigned char dir1; /* 1 direction port 1 */
+ unsigned char out1; /* 2 output type port 1 */
+ unsigned char puc1; /* 3 pull-up control port 1 */
+ unsigned char dta2; /* 4 data port 2 */
+ unsigned char dir2; /* 5 direction port 2 */
+ unsigned char out2; /* 6 output type port 2 */
+ unsigned char puc2; /* 7 pull-up control port 2 */
+};
+
+/*
+ * The following represents the power management registers on the NS87308/NS97307
+ */
+#define PWM_FER1 0 /* 0 function enable reg. 1 */
+#define PWM_FER2 1 /* 1 function enable reg. 2 */
+#define PWM_PMC1 2 /* 2 power mgmt. control 1 */
+#define PWM_PMC2 3 /* 3 power mgmt. control 2 */
+#define PWM_PMC3 4 /* 4 power mgmt. control 3 */
+#define PWM_WDTO 5 /* 5 watchdog time-out */
+#define PWM_WDCF 6 /* 6 watchdog config. */
+#define PWM_WDST 7 /* 7 watchdog status */
+
+/*PNP config registers:
+ * these depend on the stated of BADDR1 and BADDR0 on startup
+ * so there's three versions here with the last two digits indicating
+ * for which configuration their valid
+ * the 1st of the two digits indicates the state of BADDR1
+ * the 2st of the two digits indicates the state of BADDR0
+ */
+
+
+#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */
+#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */
+#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */
+#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */
+#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */
+#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */
+
+#if defined(CFG_NS87308_BADDR_0x)
+#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_0x)
+#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_0x)
+#elif defined(CFG_NS87308_BADDR_10)
+#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_10)
+#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_10)
+#elif defined(CFG_NS87308_BADDR_11)
+#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_11)
+#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_11)
+#endif
+
+/* PnP register definitions */
+
+#define SET_RD_DATA_PORT 0x00
+#define SERIAL_ISOLATION 0x01
+#define CONFIG_CONTROL 0x02
+#define WAKE_CSN 0x03
+#define RES_DATA 0x04
+#define STATUS 0x05
+#define SET_CSN 0x06
+#define LOGICAL_DEVICE 0x07
+
+/*vendor defined values */
+#define SID_REG 0x20
+#define SUPOERIO_CONF1 0x21
+#define SUPOERIO_CONF2 0x22
+#define PGCS_INDEX 0x23
+#define PGCS_DATA 0x24
+
+/* values above 30 are different for each logical device
+ but I can't be arsed to enter them all. the ones here
+ are pretty consistent between all logical devices
+ feel free to correct the situation if you want.. ;)
+ */
+#define ACTIVATE 0x30
+#define ACTIVATE_OFF 0x00
+#define ACTIVATE_ON 0x01
+
+#define BASE_ADDR_HIGH 0x60
+#define BASE_ADDR_LOW 0x61
+#define LUN_CONFIG_REG 0xF0
+#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */
+#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */
+#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */
+#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */
+
+/* the logical devices*/
+#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/
+#define LDEV_KBC2 0x01
+#define LDEV_MOUSE 0x01
+#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/
+#define LDEV_FDC 0x03 /*floppy disk controller*/
+#define LDEV_PARP 0x04 /*Parallel port*/
+#define LDEV_UART2 0x05
+#define LDEV_UART1 0x06
+#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/
+#define LDEV_POWRMAN 0x08 /*Power Managment*/
+
+#define CFG_NS87308_KBC1 (1 << LDEV_KBC1)
+#define CFG_NS87308_KBC2 (1 << LDEV_KBC2)
+#define CFG_NS87308_MOUSE (1 << LDEV_MOUSE)
+#define CFG_NS87308_RTC_APC (1 << LDEV_RTC_APC)
+#define CFG_NS87308_FDC (1 << LDEV_FDC)
+#define CFG_NS87308_PARP (1 << LDEV_PARP)
+#define CFG_NS87308_UART2 (1 << LDEV_UART2)
+#define CFG_NS87308_UART1 (1 << LDEV_UART1)
+#define CFG_NS87308_GPIO (1 << LDEV_GPIO)
+#define CFG_NS87308_POWRMAN (1 << LDEV_POWRMAN)
+
+/*some functions and macro's for doing configuration */
+
+static inline void read_pnp_config(unsigned char index, unsigned char *data)
+{
+ pci_writeb(index,IO_INDEX);
+ pci_readb(IO_DATA, *data);
+}
+
+static inline void write_pnp_config(unsigned char index, unsigned char data)
+{
+ pci_writeb(index,IO_INDEX);
+ pci_writeb(data, IO_DATA);
+}
+
+static inline void pnp_set_device(unsigned char dev)
+{
+ write_pnp_config(LOGICAL_DEVICE, dev);
+}
+
+static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data)
+{
+ pci_writeb(index, CFG_ISA_IO + base);
+ eieio();
+ pci_writeb(data, CFG_ISA_IO + base + 1);
+}
+
+/*void write_pnp_config(unsigned char index, unsigned char data);
+void pnp_set_device(unsigned char dev);
+*/
+
+#define PNP_SET_DEVICE_BASE(dev,base) \
+ pnp_set_device(dev); \
+ write_pnp_config(ACTIVATE, ACTIVATE_OFF); \
+ write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \
+ write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \
+ write_pnp_config(ACTIVATE, ACTIVATE_ON);
+
+#define PNP_ACTIVATE_DEVICE(dev) \
+ pnp_set_device(dev); \
+ write_pnp_config(ACTIVATE, ACTIVATE_ON);
+
+#define PNP_DEACTIVATE_DEVICE(dev) \
+ pnp_set_device(dev); \
+ write_pnp_config(ACTIVATE, ACTIVATE_OFF);
+
+
+static inline void write_pgcs_config(unsigned char index, unsigned char data)
+{
+ write_pnp_config(PGCS_INDEX, index);
+ write_pnp_config(PGCS_DATA, data);
+}
+
+/* these macrose configure the 3 CS lines
+ on the sandpoint board these controll NVRAM
+ CS0 is connected to NVRAMCS
+ CS1 is connected to NVRAMAS0
+ CS2 is connected to NVRAMAS1
+ */
+#define PGCS_CS_ASSERT_ON_WRITE 0x10
+#define PGCS_CS_ASSERT_ON_READ 0x20
+
+#define PNP_PGCS_CSLINE_BASE(cs, base) \
+ write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \
+ write_pgcs_config(((cs) << 2) + 1, (base) & 0xff );
+
+#define PNP_PGCS_CSLINE_CONF(cs, conf) \
+ write_pgcs_config(((cs) << 2) + 2, (conf) );
+
+
+/* The following sections are for 87308 extensions to the standard compoents it emulates */
+
+/* extensions to 16550*/
+
+#define MCR_MDSL_MSK 0xe0 /*mode select mask*/
+#define MCR_MDSL_UART 0x00 /*uart, default*/
+#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/
+#define MCR_MDSL_SIR 0x03 /*SIR*/
+#define MCR_MDSL_CIR 0x06 /*Consumer IR*/
+
+#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */
+#define FCR_TXFTH1 0x20 /* for interrupt trigger */
+
+/*
+ * Default NS87308 configuration
+ */
+#ifndef CFG_NS87308_KBC1_BASE
+#define CFG_NS87308_KBC1_BASE 0x0060
+#endif
+#ifndef CFG_NS87308_RTC_BASE
+#define CFG_NS87308_RTC_BASE 0x0070
+#endif
+#ifndef CFG_NS87308_FDC_BASE
+#define CFG_NS87308_FDC_BASE 0x03F0
+#endif
+#ifndef CFG_NS87308_LPT_BASE
+#define CFG_NS87308_LPT_BASE 0x0278
+#endif
+#ifndef CFG_NS87308_UART1_BASE
+#define CFG_NS87308_UART1_BASE 0x03F8
+#endif
+#ifndef CFG_NS87308_UART2_BASE
+#define CFG_NS87308_UART2_BASE 0x02F8
+#endif
+
+#endif /*_NS87308_H_*/
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+ #ifndef _SCSI_H
+ #define _SCSI_H
+
+typedef struct SCSI_cmd_block{
+ unsigned char cmd[16]; /* command */
+ unsigned char sense_buf[64]; /* for request sense */
+ unsigned char status; /* SCSI Status */
+ unsigned char target; /* Target ID */
+ unsigned char lun; /* Target LUN */
+ unsigned char cmdlen; /* command len */
+ unsigned long datalen; /* Total data length */
+ unsigned char * pdata; /* pointer to data */
+ unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
+ unsigned char msgin[12]; /* Message in buffer */
+ unsigned char sensecmdlen; /* Sense command len */
+ unsigned long sensedatalen; /* Sense data len */
+ unsigned char sensecmd[6]; /* Sense command */
+ unsigned long contr_stat; /* Controller Status */
+ unsigned long trans_bytes; /* tranfered bytes */
+
+ unsigned int priv;
+}ccb;
+
+/*-----------------------------------------------------------
+**
+** SCSI constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+** Messages
+*/
+
+#define M_COMPLETE (0x00)
+#define M_EXTENDED (0x01)
+#define M_SAVE_DP (0x02)
+#define M_RESTORE_DP (0x03)
+#define M_DISCONNECT (0x04)
+#define M_ID_ERROR (0x05)
+#define M_ABORT (0x06)
+#define M_REJECT (0x07)
+#define M_NOOP (0x08)
+#define M_PARITY (0x09)
+#define M_LCOMPLETE (0x0a)
+#define M_FCOMPLETE (0x0b)
+#define M_RESET (0x0c)
+#define M_ABORT_TAG (0x0d)
+#define M_CLEAR_QUEUE (0x0e)
+#define M_INIT_REC (0x0f)
+#define M_REL_REC (0x10)
+#define M_TERMINATE (0x11)
+#define M_SIMPLE_TAG (0x20)
+#define M_HEAD_TAG (0x21)
+#define M_ORDERED_TAG (0x22)
+#define M_IGN_RESIDUE (0x23)
+#define M_IDENTIFY (0x80)
+
+#define M_X_MODIFY_DP (0x00)
+#define M_X_SYNC_REQ (0x01)
+#define M_X_WIDE_REQ (0x03)
+#define M_X_PPR_REQ (0x04)
+
+
+/*
+** Status
+*/
+
+#define S_GOOD (0x00)
+#define S_CHECK_COND (0x02)
+#define S_COND_MET (0x04)
+#define S_BUSY (0x08)
+#define S_INT (0x10)
+#define S_INT_COND_MET (0x14)
+#define S_CONFLICT (0x18)
+#define S_TERMINATED (0x20)
+#define S_QUEUE_FULL (0x28)
+#define S_ILLEGAL (0xff)
+#define S_SENSE (0x80)
+
+/*
+ * Sense_keys
+ */
+
+#define SENSE_NO_SENSE 0x0
+#define SENSE_RECOVERED_ERROR 0x1
+#define SENSE_NOT_READY 0x2
+#define SENSE_MEDIUM_ERROR 0x3
+#define SENSE_HARDWARE_ERROR 0x4
+#define SENSE_ILLEGAL_REQUEST 0x5
+#define SENSE_UNIT_ATTENTION 0x6
+#define SENSE_DATA_PROTECT 0x7
+#define SENSE_BLANK_CHECK 0x8
+#define SENSE_VENDOR_SPECIFIC 0x9
+#define SENSE_COPY_ABORTED 0xA
+#define SENSE_ABORTED_COMMAND 0xB
+#define SENSE_VOLUME_OVERFLOW 0xD
+#define SENSE_MISCOMPARE 0xE
+
+
+#define SCSI_CHANGE_DEF 0x40 /* Change Definition (Optional) */
+#define SCSI_COMPARE 0x39 /* Compare (O) */
+#define SCSI_COPY 0x18 /* Copy (O) */
+#define SCSI_COP_VERIFY 0x3A /* Copy and Verify (O) */
+#define SCSI_INQUIRY 0x12 /* Inquiry (MANDATORY) */
+#define SCSI_LOG_SELECT 0x4C /* Log Select (O) */
+#define SCSI_LOG_SENSE 0x4D /* Log Sense (O) */
+#define SCSI_MODE_SEL6 0x15 /* Mode Select 6-byte (Device Specific) */
+#define SCSI_MODE_SEL10 0x55 /* Mode Select 10-byte (Device Specific) */
+#define SCSI_MODE_SEN6 0x1A /* Mode Sense 6-byte (Device Specific) */
+#define SCSI_MODE_SEN10 0x5A /* Mode Sense 10-byte (Device Specific) */
+#define SCSI_READ_BUFF 0x3C /* Read Buffer (O) */
+#define SCSI_REQ_SENSE 0x03 /* Request Sense (MANDATORY) */
+#define SCSI_SEND_DIAG 0x1D /* Send Diagnostic (O) */
+#define SCSI_TST_U_RDY 0x00 /* Test Unit Ready (MANDATORY) */
+#define SCSI_WRITE_BUFF 0x3B /* Write Buffer (O) */
+/***************************************************************************
+ * %%% Commands Unique to Direct Access Devices %%%
+ ***************************************************************************/
+#define SCSI_COMPARE 0x39 /* Compare (O) */
+#define SCSI_FORMAT 0x04 /* Format Unit (MANDATORY) */
+#define SCSI_LCK_UN_CAC 0x36 /* Lock Unlock Cache (O) */
+#define SCSI_PREFETCH 0x34 /* Prefetch (O) */
+#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
+#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
+#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
+#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
+#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
+#define SCSI_READ_LONG 0x3E /* Read Long (O) */
+#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */
+#define SCSI_RCV_DIAG 0x1C /* Receive Diagnostic Results (O) */
+#define SCSI_RELEASE 0x17 /* Release Unit (MANDATORY) */
+#define SCSI_REZERO 0x01 /* Rezero Unit (O) */
+#define SCSI_SRCH_DAT_E 0x31 /* Search Data Equal (O) */
+#define SCSI_SRCH_DAT_H 0x30 /* Search Data High (O) */
+#define SCSI_SRCH_DAT_L 0x32 /* Search Data Low (O) */
+#define SCSI_SEEK6 0x0B /* Seek 6-Byte (O) */
+#define SCSI_SEEK10 0x2B /* Seek 10-Byte (O) */
+#define SCSI_SEND_DIAG 0x1D /* Send Diagnostics (MANDATORY) */
+#define SCSI_SET_LIMIT 0x33 /* Set Limits (O) */
+#define SCSI_START_STP 0x1B /* Start/Stop Unit (O) */
+#define SCSI_SYNC_CACHE 0x35 /* Synchronize Cache (O) */
+#define SCSI_VERIFY 0x2F /* Verify (O) */
+#define SCSI_WRITE6 0x0A /* Write 6-Byte (MANDATORY) */
+#define SCSI_WRITE10 0x2A /* Write 10-Byte (MANDATORY) */
+#define SCSI_WRT_VERIFY 0x2E /* Write and Verify (O) */
+#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
+#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
+
+
+/****************************************************************************
+ * decleration of functions which have to reside in the LowLevel Part Driver
+ */
+
+void scsi_print_error(ccb *pccb);
+int scsi_exec(ccb *pccb);
+void scsi_bus_reset(void);
+void scsi_low_level_init(int busdevfunc);
+
+
+/***************************************************************************
+ * functions residing inside cmd_scsi.c
+ */
+void scsi_init(void);
+
+
+
+#define SCSI_IDENTIFY 0xC0 /* not used */
+
+/* Hardware errors */
+#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */
+#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */
+#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
+#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */
+
+#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */
+
+
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+
+
+
+
+#endif /* _SCSI_H */
+
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Most of these definitions are derived from
+ * linux/drivers/scsi/sym53c8xx_defs.h
+ *
+ */
+
+#ifndef _SYM53C8XX_DEFS_H
+#define _SYM53C8XX_DEFS_H
+
+
+#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
+
+#define SCNTL1 0x01 /* no reset */
+ #define ISCON 0x10 /* connected to scsi */
+ #define CRST 0x08 /* force reset */
+ #define IARB 0x02 /* immediate arbitration */
+
+#define SCNTL2 0x02 /* no disconnect expected */
+ #define SDU 0x80 /* cmd: disconnect will raise error */
+ #define CHM 0x40 /* sta: chained mode */
+ #define WSS 0x08 /* sta: wide scsi send [W]*/
+ #define WSR 0x01 /* sta: wide scsi received [W]*/
+
+#define SCNTL3 0x03 /* cnf system clock dependent */
+ #define EWS 0x08 /* cmd: enable wide scsi [W]*/
+ #define ULTRA 0x80 /* cmd: ULTRA enable */
+ /* bits 0-2, 7 rsvd for C1010 */
+
+#define SCID 0x04 /* cnf host adapter scsi address */
+ #define RRE 0x40 /* r/w:e enable response to resel. */
+ #define SRE 0x20 /* r/w:e enable response to select */
+
+#define SXFER 0x05 /* ### Sync speed and count */
+ /* bits 6-7 rsvd for C1010 */
+
+#define SDID 0x06 /* ### Destination-ID */
+
+#define GPREG 0x07 /* ??? IO-Pins */
+
+#define SFBR 0x08 /* ### First byte in phase */
+
+#define SOCL 0x09
+ #define CREQ 0x80 /* r/w: SCSI-REQ */
+ #define CACK 0x40 /* r/w: SCSI-ACK */
+ #define CBSY 0x20 /* r/w: SCSI-BSY */
+ #define CSEL 0x10 /* r/w: SCSI-SEL */
+ #define CATN 0x08 /* r/w: SCSI-ATN */
+ #define CMSG 0x04 /* r/w: SCSI-MSG */
+ #define CC_D 0x02 /* r/w: SCSI-C_D */
+ #define CI_O 0x01 /* r/w: SCSI-I_O */
+
+#define SSID 0x0a
+
+#define SBCL 0x0b
+
+#define DSTAT 0x0c
+ #define DFE 0x80 /* sta: dma fifo empty */
+ #define MDPE 0x40 /* int: master data parity error */
+ #define BF 0x20 /* int: script: bus fault */
+ #define ABRT 0x10 /* int: script: command aborted */
+ #define SSI 0x08 /* int: script: single step */
+ #define SIR 0x04 /* int: script: interrupt instruct. */
+ #define IID 0x01 /* int: script: illegal instruct. */
+
+#define SSTAT0 0x0d
+ #define ILF 0x80 /* sta: data in SIDL register lsb */
+ #define ORF 0x40 /* sta: data in SODR register lsb */
+ #define OLF 0x20 /* sta: data in SODL register lsb */
+ #define AIP 0x10 /* sta: arbitration in progress */
+ #define LOA 0x08 /* sta: arbitration lost */
+ #define WOA 0x04 /* sta: arbitration won */
+ #define IRST 0x02 /* sta: scsi reset signal */
+ #define SDP 0x01 /* sta: scsi parity signal */
+
+#define SSTAT1 0x0e
+ #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
+
+#define SSTAT2 0x0f
+ #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
+ #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
+ #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
+ #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
+ #define LDSC 0x02 /* sta: disconnect & reconnect */
+
+#define DSA 0x10 /* --> Base page */
+#define DSA1 0x11
+#define DSA2 0x12
+#define DSA3 0x13
+
+#define ISTAT 0x14 /* --> Main Command and status */
+ #define CABRT 0x80 /* cmd: abort current operation */
+ #define SRST 0x40 /* mod: reset chip */
+ #define SIGP 0x20 /* r/w: message from host to ncr */
+ #define SEM 0x10 /* r/w: message between host + ncr */
+ #define CON 0x08 /* sta: connected to scsi */
+ #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
+ #define SIP 0x02 /* sta: scsi-interrupt */
+ #define DIP 0x01 /* sta: host/script interrupt */
+
+
+#define CTEST0 0x18
+#define CTEST1 0x19
+#define CTEST2 0x1a
+ #define CSIGP 0x40
+ /* bits 0-2,7 rsvd for C1010 */
+
+#define CTEST3 0x1b
+ #define FLF 0x08 /* cmd: flush dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
+ #define FM 0x02 /* mod: fetch pin mode */
+ #define WRIE 0x01 /* mod: write and invalidate enable */
+ /* bits 4-7 rsvd for C1010 */
+
+#define DFIFO 0x20
+#define CTEST4 0x21
+ #define BDIS 0x80 /* mod: burst disable */
+ #define MPEE 0x08 /* mod: master parity error enable */
+
+#define CTEST5 0x22
+ #define DFS 0x20 /* mod: dma fifo size */
+ /* bits 0-1, 3-7 rsvd for C1010 */
+#define CTEST6 0x23
+
+#define DBC 0x24 /* ### Byte count and command */
+#define DNAD 0x28 /* ### Next command register */
+#define DSP 0x2c /* --> Script Pointer */
+#define DSPS 0x30 /* --> Script pointer save/opcode#2 */
+
+#define SCRATCHA 0x34 /* Temporary register a */
+#define SCRATCHA1 0x35
+#define SCRATCHA2 0x36
+#define SCRATCHA3 0x37
+
+#define DMODE 0x38
+ #define BL_2 0x80 /* mod: burst length shift value +2 */
+ #define BL_1 0x40 /* mod: burst length shift value +1 */
+ #define ERL 0x08 /* mod: enable read line */
+ #define ERMP 0x04 /* mod: enable read multiple */
+ #define BOF 0x02 /* mod: burst op code fetch */
+ #define MAN 0x01 /* mod: manual start */
+
+#define DIEN 0x39
+#define SBR 0x3a
+
+#define DCNTL 0x3b /* --> Script execution control */
+ #define CLSE 0x80 /* mod: cache line size enable */
+ #define PFF 0x40 /* cmd: pre-fetch flush */
+ #define PFEN 0x20 /* mod: pre-fetch enable */
+ #define SSM 0x10 /* mod: single step mode */
+ #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
+ #define STD 0x04 /* cmd: start dma mode */
+ #define IRQD 0x02 /* mod: irq disable */
+ #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
+ /* bits 0-1 rsvd for C1010 */
+
+#define ADDER 0x3c
+
+#define SIEN 0x40 /* -->: interrupt enable */
+#define SIST 0x42 /* <--: interrupt status */
+ #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+ #define STO 0x0400/* sta: timeout (select) */
+ #define GEN 0x0200/* sta: timeout (general) */
+ #define HTH 0x0100/* sta: timeout (handshake) */
+ #define MA 0x80 /* sta: phase mismatch */
+ #define CMP 0x40 /* sta: arbitration complete */
+ #define SEL 0x20 /* sta: selected by another device */
+ #define RSL 0x10 /* sta: reselected by another device*/
+ #define SGE 0x08 /* sta: gross error (over/underflow)*/
+ #define UDC 0x04 /* sta: unexpected disconnect */
+ #define RST 0x02 /* sta: scsi bus reset detected */
+ #define PAR 0x01 /* sta: scsi parity error */
+
+#define SLPAR 0x44
+#define SWIDE 0x45
+#define MACNTL 0x46
+#define GPCNTL 0x47
+#define STIME0 0x48 /* cmd: timeout for select&handshake*/
+#define STIME1 0x49 /* cmd: timeout user defined */
+#define RESPID 0x4a /* sta: Reselect-IDs */
+
+#define STEST0 0x4c
+
+#define STEST1 0x4d
+ #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
+ #define DBLEN 0x08 /* clock doubler running */
+ #define DBLSEL 0x04 /* clock doubler selected */
+
+
+#define STEST2 0x4e
+ #define ROF 0x40 /* reset scsi offset (after gross error!) */
+ #define EXT 0x02 /* extended filtering */
+
+#define STEST3 0x4f
+ #define TE 0x80 /* c: tolerAnt enable */
+ #define HSC 0x20 /* c: Halt SCSI Clock */
+ #define CSF 0x02 /* c: clear scsi fifo */
+
+#define SIDL 0x50 /* Lowlevel: latched from scsi data */
+#define STEST4 0x52
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE_HVD 0x40 /* High Voltage Differential */
+ #define SMODE_SE 0x80 /* Single Ended */
+ #define SMODE_LVD 0xc0 /* Low Voltage Differential */
+ #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
+ /* bits 0-5 rsvd for C1010 */
+
+#define SODL 0x54 /* Lowlevel: data out to scsi data */
+
+#define SBDL 0x58 /* Lowlevel: data from scsi data */
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REG(r) (r)
+
+/*-----------------------------------------------------------
+**
+** SCSI phases
+**
+** DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT 0x00000000
+#define SCR_DATA_IN 0x01000000
+#define SCR_COMMAND 0x02000000
+#define SCR_STATUS 0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN 0x05000000
+#define SCR_MSG_OUT 0x06000000
+#define SCR_MSG_IN 0x07000000
+
+#define SCR_ILG_OUT 0x04000000
+#define SCR_ILG_IN 0x05000000
+
+/*-----------------------------------------------------------
+**
+** Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+** MOVE_ABS (LEN)
+** <<start address>>
+**
+** MOVE_IND (LEN)
+** <<dnad_offset>>
+**
+** MOVE_TBL
+** <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE 0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL (0x10000000)
+
+
+/*-----------------------------------------------------------
+**
+** Selection
+**
+**-----------------------------------------------------------
+**
+** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
+** <<alternate_address>>
+**
+** SEL_TBL | << dnad_offset>> [ | REL_JMP]
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS 0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL 0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#define SCR_JMP_REL 0x04000000
+#define SCR_ID(id) (((unsigned long)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** WAIT_DISC
+** dummy: <<alternate_address>>
+**
+** WAIT_RESEL
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC 0x48000000
+#define SCR_WAIT_RESEL 0x50000000
+
+/*-----------------------------------------------------------
+**
+** Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+** SET (flags {|.. })
+**
+** CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f) (0x58000000 | (f))
+#define SCR_CLR(f) (0x60000000 | (f))
+
+#define SCR_CARRY 0x00000400
+#define SCR_TRG 0x00000200
+#define SCR_ACK 0x00000040
+#define SCR_ATN 0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Memory to memory move
+**
+**-----------------------------------------------------------
+**
+** COPY (bytecount)
+** << source_address >>
+** << destination_address >>
+**
+** SCR_COPY sets the NO FLUSH option by default.
+** SCR_COPY_F does not set this option.
+**
+** For chips which do not support this option,
+** ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+** Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+** SFBR_REG (reg, op, data) reg = SFBR op data
+** << 0 >>
+**
+** REG_SFBR (reg, op, data) SFBR = reg op data
+** << 0 >>
+**
+** REG_REG (reg, op, data) reg = reg op data
+** << 0 >>
+**
+**-----------------------------------------------------------
+** On 810A, 860, 825A, 875, 895 and 896 chips the content
+** of SFBR register can be used as data (SCR_SFBR_DATA).
+** The 896 has additionnal IO registers starting at
+** offset 0x80. Bit 7 of register offset is stored in
+** bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */
+
+#define SCR_SFBR_REG(reg,op,data) \
+ (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+ (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+ (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define SCR_LOAD 0x00000000
+#define SCR_SHL 0x01000000
+#define SCR_OR 0x02000000
+#define SCR_XOR 0x03000000
+#define SCR_AND 0x04000000
+#define SCR_SHR 0x05000000
+#define SCR_ADD 0x06000000
+#define SCR_ADDC 0x07000000
+
+#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+** FROM_REG (reg) SFBR = reg
+** << 0 >>
+**
+** TO_REG (reg) reg = SFBR
+** << 0 >>
+**
+** LOAD_REG (reg, data) reg = <data>
+** << 0 >>
+**
+** LOAD_SFBR(data) SFBR = <data>
+** << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+ SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+ SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+ SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+ (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+** LOAD from memory to register.
+** STORE from register to memory.
+**
+** Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+** LOAD_ABS (LEN)
+** <<start address>>
+**
+** LOAD_REL (LEN) (DSA relative)
+** <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2 0x02000000
+#define SCR_DSA_REL2 0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+ (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+ (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** CALL [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
+** <<dummy>>
+**
+** INT [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** Conditions:
+** WHEN (phase)
+** IF (phase)
+** CARRYSET
+** DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP 0x80000000
+#define SCR_JUMP 0x80080000
+#define SCR_JUMP64 0x80480000
+#define SCR_JUMPR 0x80880000
+#define SCR_CALL 0x88080000
+#define SCR_CALLR 0x88880000
+#define SCR_RETURN 0x90080000
+#define SCR_INT 0x98080000
+#define SCR_INT_FLY 0x98180000
+
+#define IFFALSE(arg) (0x00080000 | (arg))
+#define IFTRUE(arg) (0x00000000 | (arg))
+
+#define WHEN(phase) (0x00030000 | (phase))
+#define IF(phase) (0x00020000 | (phase))
+
+#define DATA(D) (0x00040000 | ((D) & 0xff))
+#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET (0x00200000)
+
+
+
+#define SIR_COMPLETE 0x10000000
+/* script errors */
+#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001
+#define SIR_CMD_OUT_ILL_PH 0x00000002
+#define SIR_STATUS_ILL_PH 0x00000003
+#define SIR_MSG_RECEIVED 0x00000004
+#define SIR_DATA_IN_ERR 0x00000005
+#define SIR_DATA_OUT_ERR 0x00000006
+#define SIR_SCRIPT_ERROR 0x00000007
+#define SIR_MSG_OUT_NO_CMD 0x00000008
+#define SIR_MSG_OVER7 0x00000009
+/* Fly interrupt */
+#define INT_ON_FY 0x00000080
+
+/* Hardware errors are defined in scsi.h */
+
+#define SCSI_IDENTIFY 0xC0
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#endif
projects / u-boot.git / commitdiff