]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: dts: at91: sama5d2: Port ebi/nand nodes from linux
authorAlexander Dahl <ada@thorsis.com>
Tue, 12 Dec 2023 16:04:21 +0000 (17:04 +0100)
committerEugen Hristev <eugen.hristev@collabora.com>
Mon, 22 Jan 2024 04:05:26 +0000 (06:05 +0200)
Required for using the new DM based atmel nand driver.
Ported from Linux v6.7-rc4.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
arch/arm/dts/sama5d2.dtsi

index c28a544da6fbafdf08d562e0796ae7d0060a3093..0dbacade3b65e95c0bf51a83c3640dba1fe1aa90 100644 (file)
                #size-cells = <1>;
                bootph-all;
 
+               nfc_sram: sram@100000 {
+                       compatible = "mmio-sram";
+                       no-memory-wc;
+                       reg = <0x00100000 0x2400>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x00100000 0x2400>;
+               };
+
                usb1: ohci@400000 {
                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
                        reg = <0x00400000 0x100000>;
                        status = "disabled";
                };
 
+               ebi: ebi@10000000 {
+                       compatible = "atmel,sama5d3-ebi";
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       atmel,smc = <&hsmc>;
+                       reg = <0x10000000 0x10000000
+                              0x60000000 0x30000000>;
+                       ranges = <0x0 0x0 0x10000000 0x10000000
+                                 0x1 0x0 0x60000000 0x10000000
+                                 0x2 0x0 0x70000000 0x10000000
+                                 0x3 0x0 0x80000000 0x10000000>;
+                       clocks = <&h32ck>;
+                       status = "disabled";
+
+                       nand_controller: nand-controller {
+                               compatible = "atmel,sama5d3-nand-controller";
+                               atmel,nfc-sram = <&nfc_sram>;
+                               atmel,nfc-io = <&nfc_io>;
+                               ecc-engine = <&pmecc>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               ranges;
+                               status = "disabled";
+                       };
+               };
+
                sdmmc0: sdio-host@a0000000 {
                        compatible = "atmel,sama5d2-sdhci";
                        reg = <0xa0000000 0x300>;
                        status = "disabled";
                };
 
+               nfc_io: nfc-io@c0000000 {
+                       compatible = "atmel,sama5d3-nfc-io", "syscon";
+                       reg = <0xc0000000 0x8000000>;
+               };
+
                apb {
                        compatible = "simple-bus";
                        #address-cells = <1>;
                                };
                        };
 
+                       hsmc: hsmc@f8014000 {
+                               compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+                               reg = <0xf8014000 0x1000>;
+                               interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+                               clocks = <&hsmc_clk>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges;
+
+                               pmecc: ecc-engine@f8014070 {
+                                       compatible = "atmel,sama5d2-pmecc";
+                                       reg = <0xf8014070 0x490>,
+                                             <0xf8014500 0x200>;
+                               };
+                       };
+
                        uart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x100>;