Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Sam Song, 09 Jun 2004:
+ - Add support for RPXlite_DW board
+ - Update FLASH driver for 4*AM29DL323DB90VI
+ - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
+
* Patch by Mark Jonas, 08 June 2004:
- Make MPC5200 boards evaluate the SVR to print processor name and
version in checkcpu() (cpu/mpc5xxx/cpu.c).
E: yooth@ipone.co.kr
D: Added port to the RPXlite board
+N: Sam Song
+E: samsongshu@yahoo.com.cn
+D: Port to the RPXlite_DW board
+
N: Brad Kemp
E: Brad.Kemp@seranoa.com
D: Port to Windriver ppmc8260 board
#########################################################################
LIST_8xx=" \
- ADS860 ICU862_100MHz NETPHONE SPD823TS \
- AMX860 IP860 NETTA SXNI855T \
- AdderII IVML24 NETTA2 TOP860 \
- CCM IVML24_128 NETTA_ISDN TQM823L \
- ELPT860 IVML24_256 NETVIA TQM823L_LCD \
- ESTEEM192E IVMS8 NETVIA_V2 TQM850L \
- ETX094 IVMS8_128 NX823 TQM855L \
- FADS823 IVMS8_256 QS823 TQM860L \
- FADS850SAR KUP4K QS850 c2mon \
- FADS860T KUP4X QS860T cogent_mpc8xx \
- FLAGADM LANTEC R360MPI hermes \
- FPS850L MBX RBC823 lwmon \
- GEN860T MBX860T RPXClassic pcu_e \
- GEN860T_SC MHPC RPXlite rmu \
- GENIETV MPC86xADS RRvision svm_sc8xx \
- GTH MPC885ADS SM850 v37 \
- IAD210 MVS1
+ AdderII GTH MHPC rmu \
+ ADS860 hermes MPC86xADS RPXClassic \
+ AMX860 IAD210 MPC885ADS RPXlite \
+ c2mon ICU862_100MHz MVS1 RPXlite_DW \
+ CCM IP860 NETPHONE RRvision \
+ cogent_mpc8xx IVML24 NETTA SM850 \
+ ELPT860 IVML24_128 NETTA2 SPD823TS \
+ ESTEEM192E IVML24_256 NETTA_ISDN svm_sc8xx \
+ ETX094 IVMS8 NETVIA SXNI855T \
+ FADS823 IVMS8_128 NETVIA_V2 TOP860 \
+ FADS850SAR IVMS8_256 NX823 TQM823L \
+ FADS860T KUP4K pcu_e TQM823L_LCD \
+ FLAGADM KUP4X QS823 TQM850L \
+ FPS850L LANTEC QS850 TQM855L \
+ GEN860T lwmon QS860T TQM860L \
+ GEN860T_SC MBX R360MPI v37 \
+ GENIETV MBX860T RBC823 \
"
#########################################################################
RPXlite_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
+RPXlite_DW_64_config \
+RPXlite_DW_LCD_config \
+RPXlite_DW_64_LCD_config \
+RPXlite_DW_NVRAM_config \
+RPXlite_DW_NVRAM_64_config \
+RPXlite_DW_NVRAM_LCD_config \
+RPXlite_DW_NVRAM_64_LCD_config \
+RPXlite_DW_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _64,$@)" ] || \
+ { echo "#define RPXlite_64MHz" >>include/config.h ; \
+ echo "... with 64MHz system clock ..."; \
+ }
+ @[ -z "$(findstring _LCD,$@)" ] || \
+ { echo "#define CONFIG_LCD" >>include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ echo "... with LCD display ..."; \
+ }
+ @[ -z "$(findstring _NVRAM,$@)" ] || \
+ { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \
+ echo "... with ENV in NVRAM ..."; \
+ }
+ @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
+
rmu_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx rmu
CANBT_config hermes_config QS850_config
cmi_mpc5xx_config hymod_config QS860T_config
cogent_common_config IP860_config RPXlite_config
- cogent_mpc8260_config IVML24_config RPXsuper_config
- cogent_mpc8xx_config IVMS8_config rsdproto_config
- CPCI405_config JSE_config Sandpoint8240_config
- CPCIISER4_config LANTEC_config sbc8260_config
- csb272_config lwmon_config SM850_config
- CU824_config MBX860T_config SPD823TS_config
- DUET_ADS_config MBX_config stxgp3_config
- EBONY_config MPC8260ADS_config SXNI855T_config
- ELPT860_config MPC8540ADS_config TQM823L_config
- ESTEEM192E_config MPC8560ADS_config TQM850L_config
- ETX094_config NETVIA_config TQM855L_config
- FADS823_config omap1510inn_config TQM860L_config
- FADS850SAR_config omap1610h2_config WALNUT405_config
- FADS860T_config omap1610inn_config ZPC1900_config
- FPS850L_config omap5912osk_config
+ cogent_mpc8260_config IVML24_config RPXlite_DW_config
+ cogent_mpc8xx_config IVMS8_config RPXsuper_config
+ CPCI405_config JSE_config rsdproto_config
+ CPCIISER4_config LANTEC_config Sandpoint8240_config
+ csb272_config lwmon_config sbc8260_config
+ CU824_config MBX860T_config SM850_config
+ DUET_ADS_config MBX_config SPD823TS_config
+ EBONY_config MPC8260ADS_config stxgp3_config
+ ELPT860_config MPC8540ADS_config SXNI855T_config
+ ESTEEM192E_config MPC8560ADS_config TQM823L_config
+ ETX094_config NETVIA_config TQM850L_config
+ FADS823_config omap1510inn_config TQM855L_config
+ FADS850SAR_config omap1610h2_config TQM860L_config
+ FADS860T_config omap1610inn_config WALNUT405_config
+ FPS850L_config omap5912osk_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
--- /dev/null
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+
+After following the step of Yoo. Jonghoon and Wolfgang Denk,
+I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW.
+
+There are three differences between the Yoo-ported RPXlite and the RPXlite_DW.
+
+Board(in U-BOOT) version(in EmbeddedPlanet) CPU SDRAM FLASH
+RPXlite RPXlite CW 850 16MB 4MB
+RPXlite_DW RPXlite DW 823e 64MB 16MB
+
+This fireware is specially coded for EmbeddedPlanet Co. Software Development
+Platform(RPXlite DW),which has a NEC NL6448BC20-08 LCD panel.
+
+It has the following three features:
+
+1. 64MHz/48MHz system frequence setting options.
+The default setting is 48MHz.To get a 64MHz u-boot,just add
+'64' in make command,like
+
+make RPXlite_DW_64_config
+make all
+
+2. CFG_ENV_IS_IN_FLASH/CFG_ENV_IS_IN_NVRAM
+
+The default environment parameter is stored in FLASH because it is a common choice for
+environment parameter.So I make NVRAM as backup parameter storeage.The reason why I
+didn't use EEPROM for ENV is that PlanetCore V2.0 use EEPROM as environment parameter
+home.Because of the possibility of using two firewares on this board,I didn't
+'disturb' EEPROM.To get NVRAM support,you may use the following build command:
+
+make RPXlite_DW_NVRAM_config
+make all
+
+3. LCD panel support
+
+To support the Platform better,I added LCD panel(NL6448BC20-08) function.But bewear of
+the fact that once you build this support and program it to FLASH,you should make sure
+you put workable kernel and ramdisk at the right place in FLASH or through NFS.
+Otherwise, you must erase this fireware manually via BDI2000 or ICE tools.So this
+function is used for deployment and demo only.Pls look before you leap.
+
+To get a LCD support u-boot,you can do the following:
+
+make RPXlite_DW_LCD_config
+make all
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The basic make commands could be:
+
+make RPXlite_DW_config
+make RPXlite_DW_64_config
+make RPXlite_DW_LCD_config
+make RPXlite_DW_NVRAM_config
+
+BTW,you can combine the above features together and get a workable u-boot to meet your need.
+For example,to get a 64MHZ && ENV_IS_IN_FLASH && LCD panel support u-boot,you can type:
+
+make RPXlite_DW_NVRAM_64_LCD_config
+make all
+
+So other combining make commands could be:
+
+make RPXlite_DW_NVRAM_64_config
+make RPXlite_DW_NVRAM_LCD_config
+make RPXlite_DW_64_LCD_config
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The boot process by "make RPXlite_DW_config" could be:
+
+U-Boot 1.1.1 (Jun 8 2004 - 11:16:30)
+
+CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache
+Board: RPXlite_DW
+DRAM: 64 MB
+FLASH: 16 MB
+*** Warning - bad CRC, using default environment
+
+In: serial
+Out: serial
+Err: serial
+Net: SCC ETHERNET
+u-boot>
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+I'd like to extend my heartfelt gratitute to kind people for helping me work it out.
+I would particually thank Wolfgang Denk for his nice help.
+
+Enjoy,
+
+Sam Song, samsongshu@yahoo.com.cn
+Institute of Electrical Machinery and Controls
+Shanghai University
+
+June 8,2004
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Sam Song
+ * U-Boot port on RPXlite DW board : RPXlite_DW or LITE_DW
+ * Tested on working at 64MHz(CPU)/32MHz(BUS),48MHz/24MHz
+ * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75.
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+static long int dram_size (long int, long int *, long int);
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFCC25
+
+const uint sdram_table[] =
+{
+ /*
+ * Single Read. (Offset 00h in UPMA RAM)
+ */
+ 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_,
+
+ /*
+ * Burst Read. (Offset 08h in UPMA RAM)
+ */
+ 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
+ 0x01FFCC20, 0x1FF74C20, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Single Write. (Offset 18h in UPMA RAM)
+ */
+ 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */
+ _NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35,
+ _NOT_USED_,
+
+ /*
+ * Burst Write. (Offset 20h in UPMA RAM)
+ */
+ 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
+ 0x01FFFC24, 0x1FF74C25, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Refresh. (Offset 30h in UPMA RAM)
+ */
+ 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
+ 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4,
+ /* INIT sequence RAM WORDS
+ * SDRAM Initialization (offset 0x36 in UPMA RAM)
+ * The above definition uses the remaining space
+ * to establish an initialization sequence,
+ * which is executed by a RUN command.
+ * The sequence is COMMAND INHIBIT(NOP),Precharge,
+ * Load Mode Register,NOP,Auto Refresh.
+ */
+
+ /*
+ * Exception. (Offset 3Ch in UPMA RAM)
+ */
+ 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
+};
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: RPXlite_DW\n") ;
+ return (0) ;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size9;
+
+ upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+ /* Refresh clock prescalar */
+ memctl->memc_mptpr = CFG_MPTPR ;
+
+ memctl->memc_mar = 0x00000088;
+
+ /* Map controller banks 1 to the SDRAM bank */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+
+ memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+ /*Disable Periodic timer A. */
+
+ udelay(200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80002236; /* SDRAM bank 0 - refresh twice */
+
+ udelay(1);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ /*Enable Periodic timer A */
+
+ udelay (1000);
+
+ /* Check Bank 0 Memory Size
+ * try 9 column mode
+ */
+
+ size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+
+ /*
+ * Final mapping:
+ */
+
+ memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+
+ udelay (1000);
+
+ return (size9);
+}
+
+void rpxlite_init (void)
+{
+ /* Enable NVRAM */
+ *((uchar *) BCSR0) |= BCSR0_ENNVRAM;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ memctl->memc_mamr = mamr_value;
+
+ return (get_ram_size (base, maxsize));
+}
--- /dev/null
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# RPXlite dw boards : lite_dw
+#
+
+TEXT_BASE = 0xff000000
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * Some of flash control words are modified. (from 2x16bit device
+ * to 4x8bit device)
+ * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
+ * are not tested.
+ *
+ * (?) Does an RPXLite board which
+ * does not use AM29LV800 flash memory exist ?
+ * I don't know...
+ */
+
+/* Yes,Yoo.They do use other FLASH for the board.
+ *
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ * U-Boot port on RPXlite DW version board
+ *
+ * By now,it uses 4 AM29DL323DB90VI devices(4x8bit).
+ * The total FLASH has 16MB(4x4MB).
+ * I just made some necessary changes on the basis of Wolfgang and Yoo's job.
+ *
+ * June 8, 2004 */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions vu_long : volatile unsigned long IN include/common.h
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0 ;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* If Monitor is in the cope of FLASH,then
+ * protect this area by default in case for
+ * other occupation. [SAM] */
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+ flash_info[0].size = size_b0;
+ return (size_b0);
+}
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x00010000;
+ info->start[3] = base + 0x00018000;
+ info->start[4] = base + 0x00020000;
+ info->start[5] = base + 0x00028000;
+ info->start[6] = base + 0x00030000;
+ info->start[7] = base + 0x00038000;
+
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + ((i-7) * 0x00040000);
+ }
+ } else {
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x00020000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00040000;
+ }
+ }
+
+}
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMDL323B: printf ("AM29DL323B (32 Mbit, bottom boot sector)\n");
+ break;
+ /* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM] */
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+ printf (" Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0xAAA] = 0x00AA00AA ;
+ addr[0x555] = 0x00550055 ;
+ addr[0xAAA] = 0x00900090 ;
+
+ value = addr[0] ;
+ switch (value & 0x00FF00FF) {
+ case AMD_MANUFACT: /* AMD_MANUFACT=0x00010001 in flash.h. */
+ info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h.*/
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[2] ; /* device ID */
+ switch (value & 0x00FF00FF) {
+ case (AMD_ID_LV400T & 0x00FF00FF):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+ case (AMD_ID_LV400B & 0x00FF00FF):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+ case (AMD_ID_LV800T & 0x00FF00FF):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case (AMD_ID_LV800B & 0x00FF00FF):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00400000; /* Size doubled by yooth */
+ break; /* => 4 MB */
+ case (AMD_ID_LV160T & 0x00FF00FF):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (AMD_ID_LV160B & 0x00FF00FF):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (AMD_ID_DL323B & 0x00FF00FF):
+ info->flash_id += FLASH_AMDL323B;
+ info->sector_count = 71;
+ info->size = 0x01000000;
+ break; /* => 16 MB(4x4MB) */
+ /* AMD_ID_DL323B= 0x22532253 FLASH_AMDL323B= 0x0013
+ * AMD_ID_DL323B could be found in <flash.h>.[SAM]
+ * So we could get : flash_id = 0x00000013.
+ * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1,
+ * it means bottom boot flash. GOOD IDEA! [SAM]
+ */
+
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x00010000;
+ info->start[3] = base + 0x00018000;
+ info->start[4] = base + 0x00020000;
+ info->start[5] = base + 0x00028000;
+ info->start[6] = base + 0x00030000;
+ info->start[7] = base + 0x00038000;
+
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + ((i-7) * 0x00040000) ;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x00020000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00040000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ /* info->protect[i] = addr[4] & 1 ; */
+ /* Mask it for disorder FLASH protection **[Sam]** */
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+
+ *addr = 0xF0F0F0F0; /* reset bank */
+ }
+ return (info->size);
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+ addr[0xAAA] = 0x80808080;
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long *)(info->start[sect]) ;
+ addr[0] = 0x30303030 ;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long *)(info->start[l_sect]);
+ while ((addr[0] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (vu_long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+ addr[0xAAA] = 0xA0A0A0A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+/* XXX ?
+ . = env_offset;
+*/
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+
+ . = env_offset;
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
rpxclassic_init ();
#endif
+#if defined(CONFIG_RPXLITE) && defined(CFG_ENV_IS_IN_NVRAM)
+ rpxlite_init ();
+#endif
+
#ifdef CFG_RCCR /* must be done before cpm_load_patch() */
/* write config value */
immr->im_cpm.cp_rccr = CFG_RCCR;
* the controller.
*/
+#ifdef CONFIG_RPXLITE
+ /* This is special for RPXlite_DW Software Development Platform **[Sam]** */
+ panel_info.vl_dp = CFG_LOW;
+#endif
+
lccrtmp = LCDBIT (LCCR_BNUM_BIT,
(((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
void rpxclassic_init (void);
#endif
+void rpxlite_init (void);
+
#ifdef CONFIG_MBX
/* $(BOARD)/mbx8xx.c */
void mbx_init (void);
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-BOOT port on RPXlite board
+ */
+
+/*
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ * U-BOOT port on RPXlite DW version board--RPXlite_DW
+ * June 8 ,2004
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/* #define DEBUG 1 */
+
+#undef CONFIG_MPC860
+#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
+#define CONFIG_RPXLITE 1 /* RPXlite DW version board */
+
+#ifdef CONFIG_LCD /* with LCD controller ? */
+#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
+#endif
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
+
+#ifdef CONFIG_LCD
+#define CONFIG_BOOTDELAY 12 /* autoboot after 12 seconds */
+#else
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#endif
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs console=ttyS0,9600 root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
+ "root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "gatewayip=172.16.115.254\0" \
+ "netmask=255.255.255.0\0" \
+ "kernel_addr=ff880000\0" \
+ "ramdisk_addr=ff980000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "u-boot>" /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0040000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFA200000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+
+#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#else
+#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
+#endif
+#define CFG_MONITOR_BASE 0xFF000000
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_ADDR 0xFA000100
+#define CFG_ENV_SIZE 0x1000
+#else
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
+#endif
+
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 32-bit 12-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif /* We can get SYPCR: 0xFFFF0689. */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 32-bit 12-30
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_MLRC10) /* SIUMCR:0x00000800 */
+
+/*---------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 16-bit 12-16
+ *---------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+/* TBSCR: 0x00C3 [SAM] */
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 16-bit 12-18
+ *-----------------------------------------------------------------------
+ * [RTC enabled but not stopped on FRZ]
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1 */
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 16-bit 12-23
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ * [Periodic timer enabled,Periodic timer interrupt disable. ]
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /* PISCR:0x0083 */
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 32-bit 5-7
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ */
+/* up to 64 MHz we use a 1:2 clock */
+#if defined(RPXlite_64MHz)
+#define CFG_PLPRCR ( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) /*PLPRCR: 0x00700000. */
+#else
+#define CFG_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+#endif
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 5-3
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF00
+/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */
+#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0xEC000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0100
+
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0 and OR0 (FLASH)
+ */
+#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base */
+#define CFG_PRELIM_OR_AM 0xFC000000 /* OR addr mask */
+
+/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
+#define CFG_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
+#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB in system */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000E00
+#define CFG_OR_AM_SDRAM (-(SDRAM_MAX_SIZE & OR_AM_MSK))
+#define CFG_OR1_PRELIM ( CFG_OR_AM_SDRAM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/* RPXlite mem setting */
+#define CFG_BR3_PRELIM 0xFA400001 /* BCSR */
+#define CFG_OR3_PRELIM 0xFF7F8900
+#define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
+#define CFG_OR4_PRELIM 0xFFFE0040
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+/* periodic timer for refresh */
+#if defined(RPXlite_64MHz)
+#define CFG_MAMR_PTA 32
+#else
+#define CFG_MAMR_PTA 20
+#endif
+
+/*
+ * Refresh clock Prescalar
+ */
+#define CFG_MPTPR MPTPR_PTP_DIV2
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
+/* CFG_MAMR_9COL:0x20904000 @ 64MHz */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
+/* Configuration variable added by yooth. */
+/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
+/*
+ * BCSRx
+ *
+ * Board Status and Control Registers
+ *
+ */
+#define BCSR0 0xFA400000
+#define BCSR1 0xFA400001
+#define BCSR2 0xFA400002
+#define BCSR3 0xFA400003
+
+#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
+#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
+#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
+#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
+#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
+#define BCSR0_COLTEST 0x20
+#define BCSR0_ETHLPBK 0x40
+#define BCSR0_ETHEN 0x80
+
+#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */
+#define BCSR1_PCVCTL6 0x02
+#define BCSR1_PCVCTL5 0x04
+#define BCSR1_PCVCTL4 0x08
+#define BCSR1_IPB5SEL 0x10
+
+#define BCSR1_SMC1CTS 0x40 /* Added by SAM. */
+#define BCSR1_SMC1TRS 0x80 /* Added by SAM. */
+
+#define BCSR2_ENRTCIRQ 0x01 /* Added by SAM. */
+#define BCSR2_ENBRG1 0x04 /* Added by SAM. */
+
+#define BCSR2_ENPA5HDR 0x08 /* USB Control */
+#define BCSR2_ENUSBCLK 0x10
+#define BCSR2_USBPWREN 0x20
+#define BCSR2_USBSPD 0x40
+#define BCSR2_USBSUSP 0x80
+
+#define BCSR3_BWKAPWR 0x01 /* Changed by SAM. Backup battery situation */
+#define BCSR3_IRQRTC 0x02 /* Changed by SAM. NVRAM Battery */
+#define BCSR3_RDY_BSY 0x04 /* Changed by SAM. Flash Operation */
+#define BCSR3_MPLX_LIN 0x08 /* Changed by SAM. Linear or Multiplexed address Mode */
+
+#define BCSR3_D27 0x10 /* Dip Switch settings */
+#define BCSR3_D26 0x20
+#define BCSR3_D25 0x40
+#define BCSR3_D24 0x80
+
+/*
+ * Environment setting
+ */
+#define CONFIG_ETHADDR 00:10:EC:00:37:5B
+#define CONFIG_IPADDR 172.16.115.7
+#define CONFIG_SERVERIP 172.16.115.6
+#define CONFIG_ROOTPATH /workspace/myfilesystem/target/
+#define CONFIG_BOOTFILE uImage.rpxusb
+
+#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff