--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &lcd1;
+ display2 = &hdmi0;
+ };
+
+ vdd_eth: fixedregulator-vdd-eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_enable_gpio>;
+
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ startup-delay-us = <25000>;
+ };
+
+ vbat: fixedregulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ debug0 {
+ label = "omap4:green:debug0";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
+ };
+
+ debug1 {
+ label = "omap4:green:debug1";
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
+ };
+
+ debug2 {
+ label = "omap4:green:debug2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
+ };
+
+ debug3 {
+ label = "omap4:green:debug3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
+ };
+
+ debug4 {
+ label = "omap4:green:debug4";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+ };
+
+ user1 {
+ label = "omap4:blue:user";
+ gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+ };
+
+ user2 {
+ label = "omap4:red:user";
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+ };
+
+ user3 {
+ label = "omap4:green:user";
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
+ };
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+ kpad {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ charging {
+ label = "omap4:green:chrg";
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&twl_pwm 1 7812500>;
+ brightness-levels = <
+ 0 10 20 30 40
+ 50 60 70 80 90
+ 100 110 120 127
+ >;
+ default-brightness-level = <13>;
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "SDP4430";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Earphone Spk", "EP",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
+
+ /* regulator for wl12xx on sdio5 */
+ wl12xx_vmmc: wl12xx_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "c";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ >;
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
+ >;
+ };
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+ >;
+ };
+
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ /* wl12xx GPIO output for WLAN_EN */
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
+ >;
+ };
+
+ /* wl12xx GPIO inputs and SDIO pins */
+ wl12xx_pins: pinmux_wl12xx_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ >;
+ };
+
+ /* gpio_48 for ENET_ENABLE */
+ enet_enable_gpio: pinmux_enet_enable_gpio {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ >;
+ };
+
+ ks8851_pins: pinmux_ks8851_pins {
+ pinctrl-single,pins = <
+ /* ENET_INT */
+ OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */
+ /*
+ * Misterious pin which makes the ethernet working
+ * The legacy board file requested this pin on boot
+ * (ETH_KS8851_QUART) and set it to high, similarly to
+ * the ENET_ENABLE pin.
+ * We could use gpio-hog to keep it high, but let's use
+ * it as a reset GPIO for ks8851.
+ */
+ OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ #clock-cells = <0>;
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+
+ /*
+ * Ambient Light Sensor
+ * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+ */
+ bh1780@29 {
+ compatible = "rohm,bh1780";
+ reg = <0x29>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * 3-Axis Digital Compass
+ * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+ */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5843";
+ reg = <0x1e>;
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ eth@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ks8851_pins>;
+
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux1>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_pins>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1281";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00000012 /* KEY_E */
+ 0x00010013 /* KEY_R */
+ 0x00020014 /* KEY_T */
+ 0x00030066 /* KEY_HOME */
+ 0x0004003f /* KEY_F5 */
+ 0x000500f0 /* KEY_UNKNOWN */
+ 0x00060017 /* KEY_I */
+ 0x0007002a /* KEY_LEFTSHIFT */
+ 0x01000020 /* KEY_D*/
+ 0x01010021 /* KEY_F */
+ 0x01020022 /* KEY_G */
+ 0x010300e7 /* KEY_SEND */
+ 0x01040040 /* KEY_F6 */
+ 0x010500f0 /* KEY_UNKNOWN */
+ 0x01060025 /* KEY_K */
+ 0x0107001c /* KEY_ENTER */
+ 0x0200002d /* KEY_X */
+ 0x0201002e /* KEY_C */
+ 0x0202002f /* KEY_V */
+ 0x0203006b /* KEY_END */
+ 0x02040041 /* KEY_F7 */
+ 0x020500f0 /* KEY_UNKNOWN */
+ 0x02060034 /* KEY_DOT */
+ 0x0207003a /* KEY_CAPSLOCK */
+ 0x0300002c /* KEY_Z */
+ 0x0301004e /* KEY_KPLUS */
+ 0x03020030 /* KEY_B */
+ 0x0303003b /* KEY_F1 */
+ 0x03040042 /* KEY_F8 */
+ 0x030500f0 /* KEY_UNKNOWN */
+ 0x03060018 /* KEY_O */
+ 0x03070039 /* KEY_SPACE */
+ 0x04000011 /* KEY_W */
+ 0x04010015 /* KEY_Y */
+ 0x04020016 /* KEY_U */
+ 0x0403003c /* KEY_F2 */
+ 0x04040073 /* KEY_VOLUMEUP */
+ 0x040500f0 /* KEY_UNKNOWN */
+ 0x04060026 /* KEY_L */
+ 0x04070069 /* KEY_LEFT */
+ 0x0500001f /* KEY_S */
+ 0x05010023 /* KEY_H */
+ 0x05020024 /* KEY_J */
+ 0x0503003d /* KEY_F3 */
+ 0x05040043 /* KEY_F9 */
+ 0x05050072 /* KEY_VOLUMEDOWN */
+ 0x05060032 /* KEY_M */
+ 0x0507006a /* KEY_RIGHT */
+ 0x06000010 /* KEY_Q */
+ 0x0601001e /* KEY_A */
+ 0x06020031 /* KEY_N */
+ 0x0603009e /* KEY_BACK */
+ 0x0604000e /* KEY_BACKSPACE */
+ 0x060500f0 /* KEY_UNKNOWN */
+ 0x06060019 /* KEY_P */
+ 0x06070067 /* KEY_UP */
+ 0x07000094 /* KEY_PROG1 */
+ 0x07010095 /* KEY_PROG2 */
+ 0x070200ca /* KEY_PROG3 */
+ 0x070300cb /* KEY_PROG4 */
+ 0x0704003e /* KEY_F4 */
+ 0x070500f0 /* KEY_UNKNOWN */
+ 0x07060160 /* KEY_OK */
+ 0x0707006c>; /* KEY_DOWN */
+ linux,input-no-autorepeat;
+};
+
+&uart2 {
+ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core OMAP4_UART4_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&dmic {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dmic_pins>;
+ status = "okay";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&dss {
+ status = "ok";
+};
+
+&dsi1 {
+ status = "ok";
+ vdd-supply = <&vcxio>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: display {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ label = "lcd0";
+
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
+
+&dsi2 {
+ status = "ok";
+ vdd-supply = <&vcxio>;
+
+ port {
+ dsi2_out_ep: endpoint {
+ remote-endpoint = <&lcd1_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd1: display {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ label = "lcd1";
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+
+ port {
+ lcd1_in: endpoint {
+ remote-endpoint = <&dsi2_out_ep>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
projects / u-boot.git / commitdiff