]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
Blackfin: convert bfin_sdh to generic mmc
authorCliff Cai <cliff.cai@analog.com>
Fri, 20 Nov 2009 08:24:43 +0000 (08:24 +0000)
committerMike Frysinger <vapier@gentoo.org>
Sun, 17 Jan 2010 14:17:27 +0000 (09:17 -0500)
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
board/bf518f-ezbrd/bf518f-ezbrd.c
board/bf548-ezkit/bf548-ezkit.c
drivers/mmc/bfin_sdh.c
drivers/mmc/bfin_sdh.h [deleted file]
include/asm-blackfin/mmc.h [deleted file]
include/asm-blackfin/sdh.h [new file with mode: 0644]
include/configs/bf518f-ezbrd.h
include/configs/bf548-ezkit.h
lib_blackfin/board.c

index 279c55c99dbd4ebcbc8bab93881b98a02474584c..85b350f3ec78a21900b09f496233706f03ba53cf 100644 (file)
@@ -15,6 +15,7 @@
 #include <asm/blackfin.h>
 #include <asm/net.h>
 #include <asm/mach-common/bits/otp.h>
+#include <asm/sdh.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -155,3 +156,10 @@ int board_early_init_f(void)
 #endif
        return 0;
 }
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+       return bfin_mmc_init(bis);
+}
+#endif
index 29c2e923e06faf432ee0617e7fae73763f7e9cb1..7659e34287a09779485ad4bdeef41dda1059da16 100644 (file)
@@ -11,6 +11,7 @@
 #include <config.h>
 #include <command.h>
 #include <asm/blackfin.h>
+#include <asm/sdh.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -78,3 +79,10 @@ int board_eth_init(bd_t *bis)
        return smc911x_initialize(0, CONFIG_SMC911X_BASE);
 }
 #endif
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+       return bfin_mmc_init(bis);
+}
+#endif
index 16c9695ba856ed50eae4994ee43c7d67eabadc7c..f9d560a71b58efcfdbb2701af4fc0c1065bffd89 100644 (file)
@@ -1,7 +1,7 @@
 /*
  * Driver for Blackfin on-chip SDH controller
  *
- * Copyright (c) 2008 Analog Devices Inc.
+ * Copyright (c) 2008-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
 #include <asm/mach-common/bits/sdh.h>
 #include <asm/mach-common/bits/dma.h>
 
-#include "bfin_sdh.h"
-
-/* SD_CLK frequency must be less than 400k in identification mode */
-#ifndef CONFIG_SYS_MMC_CLK_ID
-#define CONFIG_SYS_MMC_CLK_ID          200000
-#endif
-/* SD_CLK for normal working */
-#ifndef CONFIG_SYS_MMC_CLK_OP
-#define CONFIG_SYS_MMC_CLK_OP          25000000
-#endif
-/* support 3.2-3.3V and 3.3-3.4V */
-#define CONFIG_SYS_MMC_OP_COND         0x00300000
-#define MMC_DEFAULT_RCA                1
-
 #if defined(__ADSPBF51x__)
 # define bfin_read_SDH_PWR_CTL         bfin_read_RSI_PWR_CONTROL
 # define bfin_write_SDH_PWR_CTL                bfin_write_RSI_PWR_CONTROL
 # error no support for this proc yet
 #endif
 
-static unsigned int mmc_rca;
-static int mmc_card_is_sd;
-static block_dev_desc_t mmc_blkdev;
-struct mmc_cid cid;
-static __u32 csd[4];
-
-#define get_bits(resp, start, size)                                    \
-       ({                                                              \
-               const int __size = size;                                \
-               const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1;    \
-               const int32_t __off = 3 - ((start) / 32);                       \
-               const int32_t __shft = (start) & 31;                    \
-               uint32_t __res;                                         \
-                                                                       \
-               __res = resp[__off] >> __shft;                          \
-               if (__size + __shft > 32)                               \
-                       __res |= resp[__off-1] << ((32 - __shft) % 32); \
-               __res & __mask;                                         \
-       })
-
-
-block_dev_desc_t *mmc_get_dev(int dev)
-{
-       return &mmc_blkdev;
-}
-
-static void mci_set_clk(unsigned long clk)
-{
-       unsigned long sys_clk;
-       unsigned long clk_div;
-       __u16 clk_ctl = 0;
-
-       /* setting SD_CLK */
-       sys_clk = get_sclk();
-       bfin_write_SDH_CLK_CTL(0);
-       if (sys_clk % (2 * clk) == 0)
-               clk_div = sys_clk / (2 * clk) - 1;
-       else
-               clk_div = sys_clk / (2 * clk);
-
-       if (clk_div > 0xff)
-               clk_div = 0xff;
-       clk_ctl |= (clk_div & 0xff);
-       clk_ctl |= CLK_E;
-       bfin_write_SDH_CLK_CTL(clk_ctl);
-}
-
 static int
-mmc_cmd(unsigned long cmd, unsigned long arg, void *resp, unsigned long flags)
+sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
 {
        unsigned int sdh_cmd;
        unsigned int status;
+       int cmd = mmc_cmd->cmdidx;
+       int flags = mmc_cmd->resp_type;
+       int arg = mmc_cmd->cmdarg;
        int ret = 0;
        sdh_cmd = 0;
-       unsigned long *response = resp;
+
        sdh_cmd |= cmd;
 
        if (flags & MMC_RSP_PRESENT)
@@ -138,336 +80,137 @@ mmc_cmd(unsigned long cmd, unsigned long arg, void *resp, unsigned long flags)
                CMD_CRC_FAIL)));
 
        if (flags & MMC_RSP_PRESENT) {
-               response[0] = bfin_read_SDH_RESPONSE0();
+               mmc_cmd->response[0] = bfin_read_SDH_RESPONSE0();
                if (flags & MMC_RSP_136) {
-                       response[1] = bfin_read_SDH_RESPONSE1();
-                       response[2] = bfin_read_SDH_RESPONSE2();
-                       response[3] = bfin_read_SDH_RESPONSE3();
+                       mmc_cmd->response[1] = bfin_read_SDH_RESPONSE1();
+                       mmc_cmd->response[2] = bfin_read_SDH_RESPONSE2();
+                       mmc_cmd->response[3] = bfin_read_SDH_RESPONSE3();
                }
        }
 
-       if (status & CMD_TIME_OUT) {
-               printf("CMD%d timeout\n", (int)cmd);
-               ret |= -ETIMEDOUT;
-       } else if (status & CMD_CRC_FAIL && flags & MMC_RSP_CRC) {
-               printf("CMD%d CRC failure\n", (int)cmd);
-               ret |= -EILSEQ;
-       }
+       if (status & CMD_TIME_OUT)
+               ret |= TIMEOUT;
+       else if (status & CMD_CRC_FAIL && flags & MMC_RSP_CRC)
+               ret |= COMM_ERR;
+
        bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT |
                                CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
        return ret;
 }
 
-static int
-mmc_acmd(unsigned long cmd, unsigned long arg, void *resp, unsigned long flags)
+/* set data for single block transfer */
+static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
 {
-       unsigned long aresp[4];
+       u16 data_ctl = 0;
+       u16 dma_cfg = 0;
        int ret = 0;
 
-       ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp,
-                     MMC_RSP_PRESENT);
-       if (ret)
-               return ret;
-
-       if ((aresp[0] & (ILLEGAL_COMMAND | APP_CMD)) != APP_CMD)
-               return -ENODEV;
-       ret = mmc_cmd(cmd, arg, resp, flags);
-       return ret;
-}
-
-static unsigned long
-mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, void *buffer)
-{
-       int ret, i;
-       unsigned long resp[4];
-       unsigned long card_status;
-       __u8 *buf = buffer;
-       __u32 status;
-       __u16 data_ctl = 0;
-       __u16 dma_cfg = 0;
-
-       if (blkcnt == 0)
-               return 0;
-       debug("mmc_bread: dev %d, start %d, blkcnt %d\n", dev, start, blkcnt);
-       /* Force to use 512-byte block,because a lot of code depends on this */
-       data_ctl |= 9 << 4;
+       /* Don't support write yet. */
+       if (data->flags & MMC_DATA_WRITE)
+               return UNUSABLE_ERR;
+       data_ctl |= ((ffs(data->blocksize) - 1) << 4);
        data_ctl |= DTX_DIR;
        bfin_write_SDH_DATA_CTL(data_ctl);
-       dma_cfg |= WDSIZE_32 | RESTART | WNR | DMAEN;
-
-       /* FIXME later */
-       bfin_write_SDH_DATA_TIMER(0xFFFFFFFF);
-       for (i = 0; i < blkcnt; ++i, ++start) {
-               blackfin_dcache_flush_invalidate_range(buf + i * mmc_blkdev.blksz,
-                       buf + (i + 1) * mmc_blkdev.blksz);
-               bfin_write_DMA_START_ADDR(buf + i * mmc_blkdev.blksz);
-               bfin_write_DMA_X_COUNT(mmc_blkdev.blksz / 4);
-               bfin_write_DMA_X_MODIFY(4);
-               bfin_write_DMA_CONFIG(dma_cfg);
-               bfin_write_SDH_DATA_LGTH(mmc_blkdev.blksz);
-               /* Put the device into Transfer state */
-               ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_SELECT_CARD failed\n");
-                       goto out;
-               }
-               /* Set block length */
-               ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_SET_BLOCKLEN failed\n");
-                       goto out;
-               }
-               ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK,
-                             start * mmc_blkdev.blksz, resp,
-                             MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_READ_SINGLE_BLOCK failed\n");
-                       goto out;
-               }
-               bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
+       dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN;
 
-               do {
-                       udelay(1);
-                       status = bfin_read_SDH_STATUS();
-               } while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN)));
-
-               if (status & (DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN)) {
-                       bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT | \
-                               DAT_CRC_FAIL_STAT | RX_OVERRUN_STAT);
-                       goto read_error;
-               } else {
-                       bfin_write_SDH_STATUS_CLR(DAT_BLK_END_STAT | DAT_END_STAT);
-                       mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, 0);
-               }
-       }
- out:
+       bfin_write_SDH_DATA_TIMER(0xFFFF);
 
-       return i;
+       blackfin_dcache_flush_invalidate_range(data->dest,
+                       data->dest + data->blocksize);
+       /* configure DMA */
+       bfin_write_DMA_START_ADDR(data->dest);
+       bfin_write_DMA_X_COUNT(data->blocksize / 4);
+       bfin_write_DMA_X_MODIFY(4);
+       bfin_write_DMA_CONFIG(dma_cfg);
+       bfin_write_SDH_DATA_LGTH(data->blocksize);
+       /* kick off transfer */
+       bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
 
- read_error:
-       mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, MMC_RSP_R1);
-       printf("mmc: bread failed, status = %08x, card status = %08lx\n",
-              status, card_status);
-       goto out;
+       return ret;
 }
 
-static unsigned long
-mmc_bwrite(int dev, unsigned long start, lbaint_t blkcnt, const void *buffer)
+
+static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd,
+               struct mmc_data *data)
 {
-       int ret, i = 0;
-       unsigned long resp[4];
-       unsigned long card_status;
-       const __u8 *buf = buffer;
-       __u32 status;
-       __u16 data_ctl = 0;
-       __u16 dma_cfg = 0;
-
-       if (blkcnt == 0)
-               return 0;
-
-       debug("mmc_bwrite: dev %d, start %lx, blkcnt %lx\n",
-                dev, start, blkcnt);
-       /* Force to use 512-byte block,because a lot of code depends on this */
-       data_ctl |= 9 << 4;
-       data_ctl &= ~DTX_DIR;
-       bfin_write_SDH_DATA_CTL(data_ctl);
-       dma_cfg |= WDSIZE_32 | RESTART | DMAEN;
-       /* FIXME later */
-       bfin_write_SDH_DATA_TIMER(0xFFFFFFFF);
-       for (i = 0; i < blkcnt; ++i, ++start) {
-               bfin_write_DMA_START_ADDR(buf + i * mmc_blkdev.blksz);
-               bfin_write_DMA_X_COUNT(mmc_blkdev.blksz / 4);
-               bfin_write_DMA_X_MODIFY(4);
-               bfin_write_DMA_CONFIG(dma_cfg);
-               bfin_write_SDH_DATA_LGTH(mmc_blkdev.blksz);
-
-               /* Put the device into Transfer state */
-               ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_SELECT_CARD failed\n");
-                       goto out;
-               }
-               /* Set block length */
-               ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_SET_BLOCKLEN failed\n");
-                       goto out;
-               }
-               ret = mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK,
-                             start * mmc_blkdev.blksz, resp,
-                             MMC_RSP_R1);
-               if (ret) {
-                       printf("MMC_CMD_WRITE_SINGLE_BLOCK failed\n");
-                       goto out;
-               }
-               bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
+       u32 status;
+       int ret = 0;
 
+       ret = sdh_send_cmd(mmc, cmd);
+       if (ret) {
+               printf("sending CMD%d failed\n", cmd->cmdidx);
+               return ret;
+       }
+       if (data) {
+               ret = sdh_setup_data(mmc, data);
                do {
                        udelay(1);
                        status = bfin_read_SDH_STATUS();
-               } while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | TX_UNDERRUN)));
+               } while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN)));
 
-               if (status & (DAT_TIME_OUT | DAT_CRC_FAIL | TX_UNDERRUN)) {
-                       bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT |
-                               DAT_CRC_FAIL_STAT | TX_UNDERRUN_STAT);
-                       goto write_error;
-               } else {
+               if (status & DAT_TIME_OUT) {
+                       bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT);
+                       ret |= TIMEOUT;
+               } else if (status & (DAT_CRC_FAIL | RX_OVERRUN)) {
+                       bfin_write_SDH_STATUS_CLR(DAT_CRC_FAIL_STAT | RX_OVERRUN_STAT);
+                       ret |= COMM_ERR;
+               } else
                        bfin_write_SDH_STATUS_CLR(DAT_BLK_END_STAT | DAT_END_STAT);
-                       mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, 0);
+
+               if (ret) {
+                       printf("tranfering data failed\n");
+                       return ret;
                }
        }
- out:
-       return i;
-
- write_error:
-       mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, MMC_RSP_R1);
-       printf("mmc: bwrite failed, status = %08x, card status = %08lx\n",
-              status, card_status);
-       goto out;
-}
-
-static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
-{
-       cid->mid = resp[0] >> 24;
-       cid->oid = (resp[0] >> 8) & 0xffff;
-       cid->pnm[0] = resp[0];
-       cid->pnm[1] = resp[1] >> 24;
-       cid->pnm[2] = resp[1] >> 16;
-       cid->pnm[3] = resp[1] >> 8;
-       cid->pnm[4] = resp[1];
-       cid->pnm[5] = resp[2] >> 24;
-       cid->pnm[6] = 0;
-       cid->prv = resp[2] >> 16;
-       cid->psn = (resp[2] << 16) | (resp[3] >> 16);
-       cid->mdt = resp[3] >> 8;
-}
-
-static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
-{
-       cid->mid = resp[0] >> 24;
-       cid->oid = (resp[0] >> 8) & 0xffff;
-       cid->pnm[0] = resp[0];
-       cid->pnm[1] = resp[1] >> 24;
-       cid->pnm[2] = resp[1] >> 16;
-       cid->pnm[3] = resp[1] >> 8;
-       cid->pnm[4] = resp[1];
-       cid->pnm[5] = 0;
-       cid->pnm[6] = 0;
-       cid->prv = resp[2] >> 24;
-       cid->psn = (resp[2] << 8) | (resp[3] >> 24);
-       cid->mdt = (resp[3] >> 8) & 0x0fff;
-}
-
-static void mmc_dump_cid(const struct mmc_cid *cid)
-{
-       printf("CID information:\n");
-       printf("Manufacturer ID:       %02X\n", cid->mid);
-       printf("OEM/Application ID:    %04X\n", cid->oid);
-       printf("Product name:          %s\n", cid->pnm);
-       printf("Product Revision:      %u.%u\n",
-              cid->prv >> 4, cid->prv & 0x0f);
-       printf("Product Serial Number: %lu\n", cid->psn);
-       printf("Manufacturing Date:    %02u/%02u\n",
-              cid->mdt >> 4, cid->mdt & 0x0f);
-}
-
-static void mmc_dump_csd(__u32 *csd)
-{
-       printf("CSD information:\n");
-       printf("CSD structure version:   1.%u\n", get_bits(csd, 126, 2));
-       printf("Card command classes:    %03x\n", get_bits(csd, 84, 12));
-       printf("Max trans speed: %s\n", (get_bits(csd, 96, 8) == 0x32) ? "25MHz" : "50MHz");
-       printf("Read block length:       %d\n", 1 << get_bits(csd, 80, 4));
-       printf("Write block length:      %u\n", 1 << get_bits(csd, 22, 4));
-       printf("Card capacity:          %u bytes\n",
-              (get_bits(csd, 62, 12) + 1) * (1 << (get_bits(csd, 47, 3) + 2)) *
-              (1 << get_bits(csd, 80, 4)));
-       putc('\n');
+       return 0;
 }
 
-static int mmc_idle_cards(void)
+static void sdh_set_clk(unsigned long clk)
 {
-       int ret = 0;
-
-       /* Reset all cards */
-       ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
-       if (ret)
-               return ret;
-       udelay(500);
-       return mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0);
+       unsigned long sys_clk;
+       unsigned long clk_div;
+       u16 clk_ctl = 0;
+
+       clk_ctl = bfin_read_SDH_CLK_CTL();
+       if (clk) {
+               /* setting SD_CLK */
+               sys_clk = get_sclk();
+               bfin_write_SDH_CLK_CTL(clk_ctl & ~CLK_E);
+               if (sys_clk % (2 * clk) == 0)
+                       clk_div = sys_clk / (2 * clk) - 1;
+               else
+                       clk_div = sys_clk / (2 * clk);
+
+               if (clk_div > 0xff)
+                       clk_div = 0xff;
+               clk_ctl |= (clk_div & 0xff);
+               clk_ctl |= CLK_E;
+               bfin_write_SDH_CLK_CTL(clk_ctl);
+       } else
+               bfin_write_SDH_CLK_CTL(clk_ctl & ~CLK_E);
 }
 
-static int sd_init_card(struct mmc_cid *cid, int verbose)
+static void bfin_sdh_set_ios(struct mmc *mmc)
 {
-       unsigned long resp[4];
-       int i, ret = 0;
-
-       mmc_idle_cards();
-       for (i = 0; i < 1000; ++i) {
-               ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
-                              resp, MMC_RSP_R3);
-               if (ret || (resp[0] & 0x80000000))
-                       break;
-               ret = -ETIMEDOUT;
+       u16 cfg = 0;
+       u16 clk_ctl = 0;
+
+       if (mmc->bus_width == 4) {
+               cfg = bfin_read_SDH_CFG();
+               cfg &= ~0x80;
+               cfg |= 0x40;
+               bfin_write_SDH_CFG(cfg);
+               clk_ctl |= WIDE_BUS;
        }
-       if (ret)
-               return ret;
-
-       ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, MMC_RSP_R2);
-       if (ret)
-               return ret;
-       sd_parse_cid(cid, resp);
-       if (verbose)
-               mmc_dump_cid(cid);
-
-       /* Get RCA of the card that responded */
-       ret = mmc_cmd(SD_CMD_SEND_RELATIVE_ADDR, 0, resp, MMC_RSP_R6);
-       if (ret)
-               return ret;
-
-       mmc_rca = (resp[0] >> 16) & 0xffff;
-       if (verbose)
-               printf("SD Card detected (RCA %u)\n", mmc_rca);
-       mmc_card_is_sd = 1;
-       return 0;
+       bfin_write_SDH_CLK_CTL(clk_ctl);
+       sdh_set_clk(mmc->clock);
 }
 
-static int mmc_init_card(struct mmc_cid *cid, int verbose)
+static int bfin_sdh_init(struct mmc *mmc)
 {
-       unsigned long resp[4];
-       int i, ret = 0;
-
-       mmc_idle_cards();
-       for (i = 0; i < 1000; ++i) {
-               ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND, resp,
-                             MMC_RSP_R3);
-               if (ret || (resp[0] & 0x80000000))
-                       break;
-               ret = -ETIMEDOUT;
-       }
-       if (ret)
-               return ret;
 
-       /* Get CID of all cards. FIXME: Support more than one card */
-       ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, MMC_RSP_R2);
-       if (ret)
-               return ret;
-       mmc_parse_cid(cid, resp);
-       if (verbose)
-               mmc_dump_cid(cid);
-
-       /* Set Relative Address of the card that responded */
-       ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp,
-                     MMC_RSP_R1);
-       return ret;
-}
-
-int mmc_legacy_init(int verbose)
-{
-       __u16 pwr_ctl = 0;
-       int ret;
-       unsigned int max_blksz;
-       /* Initialize sdh controller */
+       u16 pwr_ctl = 0;
+/* Initialize sdh controller */
 #if defined(__ADSPBF54x__)
        bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
        bfin_write_PORTC_FER(bfin_read_PORTC_FER() | 0x3F00);
@@ -481,56 +224,34 @@ int mmc_legacy_init(int verbose)
        bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
        /* Disable card detect pin */
        bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
-       mci_set_clk(CONFIG_SYS_MMC_CLK_ID);
-       /* setting power control */
+
        pwr_ctl |= ROD_CTL;
        pwr_ctl |= PWR_ON;
        bfin_write_SDH_PWR_CTL(pwr_ctl);
-       mmc_card_is_sd = 0;
-       ret = sd_init_card(&cid, verbose);
-       if (ret) {
-               mmc_rca = MMC_DEFAULT_RCA;
-               ret = mmc_init_card(&cid, verbose);
-       }
-       if (ret)
-               return ret;
-       /* Get CSD from the card */
-       ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, csd, MMC_RSP_R2);
-       if (ret)
-               return ret;
-       if (verbose)
-               mmc_dump_csd(csd);
-       /* Initialize the blockdev structure */
-       mmc_blkdev.if_type = IF_TYPE_MMC;
-       mmc_blkdev.part_type = PART_TYPE_DOS;
-       mmc_blkdev.block_read = mmc_bread;
-       mmc_blkdev.block_write = mmc_bwrite;
-       sprintf(mmc_blkdev.vendor,
-               "Man %02x%04x Snr %08lx",
-               cid.mid, cid.oid, cid.psn);
-       strncpy(mmc_blkdev.product, cid.pnm,
-               sizeof(mmc_blkdev.product));
-       sprintf(mmc_blkdev.revision, "%x %x",
-               cid.prv >> 4, cid.prv & 0x0f);
-
-       max_blksz = 1 << get_bits(csd, 80, 4);
-       /*
-        * If we can't use 512 byte blocks, refuse to deal with the
-        * card. Tons of code elsewhere seems to depend on this.
-        */
-       if (max_blksz < 512 || (max_blksz > 512 && !get_bits(csd, 79, 1))) {
-               printf("Card does not support 512 byte reads, aborting.\n");
-               return -ENODEV;
-       }
-
-       mmc_blkdev.blksz = 512;
-       mmc_blkdev.lba = (get_bits(csd, 62, 12) + 1) * (1 << (get_bits(csd, 47, 3) + 2));
-       mci_set_clk(CONFIG_SYS_MMC_CLK_OP);
-       init_part(&mmc_blkdev);
        return 0;
 }
 
-int mmc2info(ulong addr)
+
+int bfin_mmc_init(bd_t *bis)
 {
+       struct mmc *mmc = NULL;
+
+       mmc = malloc(sizeof(struct mmc));
+
+       if (!mmc)
+               return -ENOMEM;
+       sprintf(mmc->name, "Blackfin SDH");
+       mmc->send_cmd = bfin_sdh_request;
+       mmc->set_ios = bfin_sdh_set_ios;
+       mmc->init = bfin_sdh_init;
+       mmc->host_caps = MMC_MODE_4BIT;
+
+       mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+       mmc->f_max = get_sclk();
+       mmc->f_min = mmc->f_max >> 9;
+       mmc->block_dev.part_type = PART_TYPE_DOS;
+
+       mmc_register(mmc);
+
        return 0;
 }
diff --git a/drivers/mmc/bfin_sdh.h b/drivers/mmc/bfin_sdh.h
deleted file mode 100644 (file)
index 793ec30..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (C) 2008 Analog Device Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __BLACKFIN_SDH_H__
-#define __BLACKFIN_SDH_H__
-
-#define MMC_RSP_PRESENT        (1 << 0)
-#define MMC_RSP_136    (1 << 1)                /* 136 bit response */
-#define MMC_RSP_CRC    (1 << 2)                /* expect valid crc */
-#define MMC_RSP_BUSY   (1 << 3)                /* card may send busy */
-#define MMC_RSP_OPCODE (1 << 4)                /* response contains opcode */
-
-#define MMC_CMD_MASK   (3 << 5)                /* non-SPI command type */
-#define MMC_CMD_AC     (0 << 5)
-#define MMC_CMD_ADTC   (1 << 5)
-#define MMC_CMD_BC     (2 << 5)
-#define MMC_CMD_BCR    (3 << 5)
-
-#define MMC_RSP_SPI_S1 (1 << 7)                /* one status byte */
-#define MMC_RSP_SPI_S2 (1 << 8)                /* second byte */
-#define MMC_RSP_SPI_B4 (1 << 9)                /* four data bytes */
-#define MMC_RSP_SPI_BUSY (1 << 10)             /* card may send busy */
-
-/*
- * These are the native response types, and correspond to valid bit
- * patterns of the above flags.  One additional valid pattern
- * is all zeros, which means we don't expect a response.
- */
-#define MMC_RSP_NONE   (0)
-#define MMC_RSP_R1     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R1B    (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
-#define MMC_RSP_R2     (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
-#define MMC_RSP_R3     (MMC_RSP_PRESENT)
-#define MMC_RSP_R4     (MMC_RSP_PRESENT)
-#define MMC_RSP_R5     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R6     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R7     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define ILLEGAL_COMMAND  (1 << 22)
-#define APP_CMD                 (1 << 5)
-
-#endif
diff --git a/include/asm-blackfin/mmc.h b/include/asm-blackfin/mmc.h
deleted file mode 100644 (file)
index aa2ac95..0000000
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-avr32/arch-at32ap700x/mmc.h>
diff --git a/include/asm-blackfin/sdh.h b/include/asm-blackfin/sdh.h
new file mode 100644 (file)
index 0000000..2c2f63e
--- /dev/null
@@ -0,0 +1,17 @@
+/*
+ * sdh.h, export bfin_mmc_init
+ *
+ * Copyright (c) 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_SDH_H__
+#define __ASM_SDH_H__
+
+#include <mmc.h>
+#include <asm/u-boot.h>
+
+int bfin_mmc_init(bd_t *bis);
+
+#endif
index 492840327892b3e77fcdd3e5ce5d2fe2bc6df2ac..234e5a4ac228c552e5f191c77a9014e9a7419eca 100644 (file)
  * SDH Settings
  */
 #if !defined(__ADSPBF512__)
+#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_BFIN_SDH
 #endif
index 297c3fda08b8af8767a2e3b3a9194897113e9667..f9c97114ad060792ba68d165296d5b1f8bd87233 100644 (file)
  * SDH Settings
  */
 #if !defined(__ADSPBF544__)
+#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_BFIN_SDH
 #endif
index ed4e77b4bc02611006f536e288ce788d26a881c8..90da2b43589718399e4eb0470ccbf238e73334f9 100644 (file)
@@ -14,6 +14,7 @@
 #include <stdio_dev.h>
 #include <environment.h>
 #include <malloc.h>
+#include <mmc.h>
 #include <net.h>
 #include <timestamp.h>
 #include <status_led.h>
@@ -340,6 +341,11 @@ void board_init_r(gd_t * id, ulong dest_addr)
        nand_init();            /* go init the NAND */
 #endif
 
+#ifdef CONFIG_GENERIC_MMC
+       puts("MMC:  ");
+       mmc_initialize(bd);
+#endif
+
        /* relocate environment function pointers etc. */
        env_relocate();