--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2021 Phil Sutter <phil@nwl.cc>
+
+obj-y += legacy.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021
+ * Walter Schweizer <swwa@users.sourceforge.net>
+ * Phil Sutter <phil@nwl.cc>
+ */
+
+#include <config.h>
+#include <vsprintf.h>
+#include <env.h>
+#include <net.h>
+#include <asm/setup.h>
+
+#include "legacy.h"
+
+static unsigned int syno_board_id(void)
+{
+ switch (CONFIG_MACH_TYPE) {
+ case 527:
+ return SYNO_DS109_ID;
+ case 3036:
+ return SYNO_AXP_4BAY_2BAY;
+ default:
+ return 0;
+ }
+}
+
+static unsigned int usb_port_modes(void)
+{
+ unsigned int i, ret = 0;
+ char var[32], *val;
+
+ for (i = 0; i < USBPORT_MAX; i++) {
+ snprintf(var, 32, "usb%dMode", i);
+ val = env_get(var);
+
+ if (!val || strcasecmp(val, "host"))
+ continue;
+
+ ret |= 1 << i;
+ }
+ return ret;
+}
+
+/* Support old kernels */
+void setup_board_tags(struct tag **in_params)
+{
+ struct tag_mv_uboot *t;
+ struct tag *params;
+ int i;
+
+ debug("Synology board tags...\n");
+
+ params = *in_params;
+ t = (struct tag_mv_uboot *)¶ms->u;
+
+ t->uboot_version = VER_NUM | syno_board_id();
+ t->tclk = CONFIG_SYS_TCLK;
+ t->sysclk = CONFIG_SYS_TCLK * 2;
+ t->isusbhost = usb_port_modes();
+
+ for (i = 0; i < ETHADDR_MAX; i++) {
+ char addrvar[16], mtuvar[16];
+
+ sprintf(addrvar, i ? "eth%daddr" : "ethaddr", i);
+ sprintf(mtuvar, i ? "eth%dmtu" : "ethmtu", i);
+
+ eth_env_get_enetaddr(addrvar, t->macaddr[i]);
+ t->mtu[i] = env_get_ulong(mtuvar, 10, 0);
+ }
+
+ params->hdr.tag = ATAG_MV_UBOOT;
+ params->hdr.size = tag_size(tag_mv_uboot);
+ params = tag_next(params);
+ *in_params = params;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2021
+ * Walter Schweizer <swwa@users.sourceforge.net>
+ * Phil Sutter <phil@nwl.cc>
+ */
+
+#ifndef __SYNO_LEGACY_H
+#define __SYNO_LEGACY_H
+
+/* Marvell uboot parameters */
+#define ATAG_MV_UBOOT 0x41000403
+#define VER_NUM 0x03040400 /* 3.4.4 */
+
+#define BOARD_ID_BASE 0x0
+#define SYNO_DS109_ID (BOARD_ID_BASE + 0x15)
+#define SYNO_AXP_4BAY_2BAY (0xf + 1)
+
+#define ETHADDR_MAX 4
+#define USBPORT_MAX 3
+
+struct tag_mv_uboot {
+ u32 uboot_version;
+ u32 tclk;
+ u32 sysclk;
+ u32 isusbhost;
+ u8 macaddr[ETHADDR_MAX][ETH_ALEN];
+ u16 mtu[ETHADDR_MAX];
+ u32 fw_image_base;
+ u32 fw_image_size;
+};
+
+#endif /* __SYNO_LEGACY_H */
SOFTWARE_REBOOT);
}
-/* Support old kernels */
-void setup_board_tags(struct tag **in_params)
-{
- unsigned int boardId;
- struct tag *params;
- struct tag_mv_uboot *t;
- int i;
-
- printf("Synology board tags...");
- params = *in_params;
- t = (struct tag_mv_uboot *)¶ms->u;
-
- t->uboot_version = VER_NUM;
-
- boardId = SYNO_DS109_ID;
- t->uboot_version |= boardId;
-
- t->tclk = CONFIG_SYS_TCLK;
- t->sysclk = CONFIG_SYS_TCLK*2;
-
- t->isusbhost = 1;
- for (i = 0; i < 4; i++) {
- memset(t->macaddr[i], 0, sizeof(t->macaddr[i]));
- t->mtu[i] = 0;
- }
-
- params->hdr.tag = ATAG_MV_UBOOT;
- params->hdr.size = tag_size(tag_mv_uboot);
- params = tag_next(params);
- *in_params = params;
-}
-
#ifdef CONFIG_RESET_PHY_R
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-/* Marvell uboot parameters */
-#define ATAG_MV_UBOOT 0x41000403
-#define VER_NUM 0x03040400 /* 3.4.4 */
-#define BOARD_ID_BASE 0x0
-#define SYNO_DS109_ID (BOARD_ID_BASE+0x15)
-
-struct tag_mv_uboot {
- u32 uboot_version;
- u32 tclk;
- u32 sysclk;
- u32 isusbhost;
- char macaddr[4][6];
- u16 mtu[4];
- u32 fw_image_base;
- u32 fw_image_size;
-};
-
#endif /* __DS109_H */
CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="usb start; sf probe"
+CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1"
+# CONFIG_USE_PREBOOT is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_I2C_SUPPORT=y
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
"x_bootargs=console=ttyS0,115200\0" \
"x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
- "ipaddr=192.168.1.5\0"
+ "ipaddr=192.168.1.5\0" \
+ "usb0Mode=host\0"
/*
* Ethernet Driver configuration
#ifndef _CONFIG_SYNOLOGY_DS414_H
#define _CONFIG_SYNOLOGY_DS414_H
+/* Vendor kernel expects this MACH_TYPE */
+#define CONFIG_MACH_TYPE 3036
+
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_DDR_32BIT
/* Default Environment */
-#define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm"
#define CONFIG_LOADADDR 0x80000
+#define CONFIG_BOOTCOMMAND \
+ "sf probe; " \
+ "sf read ${loadaddr} 0xd0000 0x2d0000; " \
+ "sf read ${ramdisk_addr_r} 0x3a0000 0x430000; " \
+ "bootm ${loadaddr} ${ramdisk_addr_r}"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "initrd_high=0xffffffff\0" \
+ "ramdisk_addr_r=0x8000000\0" \
+ "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \
+ "ethmtu=1500\0eth1mtu=1500\0"
/* increase autoneg timeout, my NIC sucks */
#define PHY_ANEG_TIMEOUT 16000