OMAP3: mt_ventoux: Correct board pinmux

Fix some issues (some pins were not set as GPIOs)

Signed-off-by: Stefano Babic <sbabic@denx.de>

diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
index 9b2e43ec6f0293b7f53495ebbe74b5a370568f89..d1fee25f5c806873b09a378770b00e10675fea38 100644 (file)
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = {
                        /*GPIO_62: FPGA_RESET */ \
        MUX_VAL(CP(GPMC_WAIT0),         (IEN  | PTU | EN  | M4)) \
        MUX_VAL(CP(GPMC_WAIT1),         (IEN  | PTU | EN  | M4)) \
-       MUX_VAL(CP(GPMC_WAIT2),         (IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+       MUX_VAL(CP(GPMC_WAIT2),         (IEN  | PTU | EN  | M4)) \
+                       /* GPIO_64*/ \
        MUX_VAL(CP(GPMC_WAIT3),         (IEN  | PTU | EN  | M4)) \
        /* DSS */\
        MUX_VAL(CP(DSS_PCLK),           (IDIS | PTD | DIS | M0)) \
@@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(DSS_DATA22),         (IDIS | PTD | DIS | M0)) \
        MUX_VAL(CP(DSS_DATA23),         (IDIS | PTD | DIS | M0)) \
        /* CAMERA */\
-       MUX_VAL(CP(CAM_HS),             (IEN  | PTU | EN  | M0)) \
-       MUX_VAL(CP(CAM_VS),             (IEN  | PTU | EN  | M0)) \
-       MUX_VAL(CP(CAM_XCLKA),          (IDIS | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_PCLK),           (IEN  | PTU | EN  | M0)) \
-       MUX_VAL(CP(CAM_FLD),            (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
-       MUX_VAL(CP(CAM_D0),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D1),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D2),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D3),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D4),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D5),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D6),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D7),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D8),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D9),             (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D10),            (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_D11),            (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_XCLKB),          (IDIS | PTD | DIS | M0)) \
-       MUX_VAL(CP(CAM_WEN),            (IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-       MUX_VAL(CP(CAM_STROBE),         (IDIS | PTD | DIS | M0)) \
        MUX_VAL(CP(CSI2_DX0),           (IEN  | PTD | DIS | M0)) \
        MUX_VAL(CP(CSI2_DY0),           (IEN  | PTD | DIS | M0)) \
        MUX_VAL(CP(CSI2_DX1),           (IEN  | PTD | DIS | M0)) \
@@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = {
                        /* GPIO_126: CardDetect */\
        MUX_VAL(CP(MMC1_DAT5),          (IEN  | PTU | EN  | M4)) \
        MUX_VAL(CP(MMC1_DAT6),          (IEN  | PTU | EN  | M4)) \
+                       /*GPIO_128 */ \
        MUX_VAL(CP(MMC1_DAT7),          (IEN  | PTU | EN  | M4)) \
        \
        MUX_VAL(CP(MMC2_CLK),           (IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
@@ -250,7 +232,7 @@ const omap3_sysinfo sysinfo = {
        \
        MUX_VAL(CP(MCBSP4_CLKX),        (IEN | PTD | DIS | M4)) \
                        /*GPIO_152: Ignition Sense */ \
-       MUX_VAL(CP(MCBSP4_DR),          (IDIS | PTD | DIS | M4)) \
+       MUX_VAL(CP(MCBSP4_DR),          (IEN | PTD | DIS | M4)) \
                        /*GPIO_153: Power Button Sense */ \
        MUX_VAL(CP(MCBSP4_DX),          (IEN | PTU | DIS | M4)) \
                        /* GPIO_154: FPGA_DONE */ \
@@ -264,10 +246,14 @@ const omap3_sysinfo sysinfo = {
                        /* GPIO_150: USB status 1 */\
        \
        MUX_VAL(CP(UART1_RX),           (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(UART2_CTS),          (IEN  | PTU | EN  | M0)) \
-       MUX_VAL(CP(UART2_RTS),          (IDIS | PTD | DIS | M0)) \
-       MUX_VAL(CP(UART2_TX),           (IDIS | PTD | DIS | M0)) \
-       MUX_VAL(CP(UART2_RX),           (IEN  | PTD | DIS | M0)) \
+       MUX_VAL(CP(UART2_CTS),          (IEN  | PTU | EN  | M2)) \
+                       /* gpt9_pwm */\
+       MUX_VAL(CP(UART2_RTS),          (IEN | PTD | DIS | M2)) \
+                       /* gpt10_pwm */\
+       MUX_VAL(CP(UART2_TX),           (IEN | PTD | DIS | M2)) \
+                       /* gpt8_pwm */\
+       MUX_VAL(CP(UART2_RX),           (IEN  | PTD | DIS | M2)) \
+                       /* gpt11_pwm */\
        \
        MUX_VAL(CP(UART3_CTS_RCTX),     (IDIS  | PTD | DIS | M4)) \
                        /*GPIO_163 : TS_PENIRQ*/ \
@@ -299,22 +285,24 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(MCSPI2_CS0),         (IEN  | PTD | EN  | M4)) \
        MUX_VAL(CP(MCSPI2_CS1),         (IEN  | PTD | EN  | M0)) \
        /* CCDC */\
-       MUX_VAL(CP(CCDC_PCLK),          (IEN  | PTU | EN  | M0)) \
+       MUX_VAL(CP(CCDC_PCLK),          (IEN  | PTU | EN  | M4)) \
+                       /* GPIO94 */\
        MUX_VAL(CP(CCDC_FIELD),         (IEN  | PTD | DIS | M4)) \
                        /* GPIO95: #Enable Output */\
-       MUX_VAL(CP(CCDC_HD),            (IEN  | PTU | EN  | M0)) \
-       MUX_VAL(CP(CCDC_VD),            (IEN  | PTU | EN  | M0)) \
+       MUX_VAL(CP(CCDC_HD),            (IEN  | PTU | EN  | M4)) \
+       MUX_VAL(CP(CCDC_VD),            (IEN  | PTU | EN  | M4)) \
        MUX_VAL(CP(CCDC_WEN),           (IEN  | PTD | DIS | M4)) \
                        /* GPIO 99: #SOM_PWR_OFF */\
-       MUX_VAL(CP(CCDC_DATA0),         (IEN  | PTD | DIS | M0)) \
+       MUX_VAL(CP(CCDC_DATA0),         (IEN  | PTD | DIS | M4)) \
        MUX_VAL(CP(CCDC_DATA1),         (IEN  | PTD | DIS | M4)) \
                        /* GPIO_100: #power out */\
-       MUX_VAL(CP(CCDC_DATA2),         (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CCDC_DATA3),         (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CCDC_DATA4),         (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CCDC_DATA5),         (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CCDC_DATA6),         (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(CCDC_DATA7),         (IEN  | PTD | DIS | M0)) \
+       MUX_VAL(CP(CCDC_DATA2),         (IEN  | PTD | DIS | M4)) \
+       MUX_VAL(CP(CCDC_DATA3),         (IEN  | PTD | DIS | M4)) \
+                       /* GPIO_102 */\
+       MUX_VAL(CP(CCDC_DATA4),         (IEN  | PTD | DIS | M4)) \
+       MUX_VAL(CP(CCDC_DATA5),         (IEN  | PTD | DIS | M4)) \
+       MUX_VAL(CP(CCDC_DATA6),         (IEN  | PTD | DIS | M4)) \
+       MUX_VAL(CP(CCDC_DATA7),         (IEN  | PTD | DIS | M4)) \
        /* RMII */\
        MUX_VAL(CP(RMII_MDIO_DATA),     (IEN  |  M0)) \
        MUX_VAL(CP(RMII_MDIO_CLK),      (M0)) \
@@ -363,7 +351,8 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(SYS_BOOT8),          (IEN  | PTD | EN  | M0)) \
        \
        MUX_VAL(CP(SYS_OFF_MODE),       (IEN  | PTD | DIS | M0)) \
-       MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTD | DIS | M0)) \
+       MUX_VAL(CP(SYS_CLKOUT1),        (IDIS | PTD | DIS | M4)) \
+                       /* gpio_10 */\
        MUX_VAL(CP(SYS_CLKOUT2),        (IEN  | PTU | EN  | M0)) \
        /* JTAG */\
        MUX_VAL(CP(JTAG_nTRST),         (IEN  | PTD | DIS | M0)) \
@@ -387,12 +376,15 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(ETK_D7_ES2),         (IEN  | PTU | EN  | M3)) \
        MUX_VAL(CP(ETK_D8_ES2),         (IEN  | PTD | EN  | M3)) \
        MUX_VAL(CP(ETK_D9_ES2),         (IEN  | PTD | EN  | M3)) \
-       MUX_VAL(CP(ETK_D10_ES2),        (IEN  | PTU | EN  | M4)) \
+       MUX_VAL(CP(ETK_D10_ES2),        (IDIS | PTD | EN  | M4)) \
+                                       /* gpio_24 */\
        MUX_VAL(CP(ETK_D11_ES2),        (IDIS | PTD | DIS | M4)) \
-       MUX_VAL(CP(ETK_D12_ES2),        (IEN  | PTD | DIS | M3)) \
+       MUX_VAL(CP(ETK_D12_ES2),        (IEN  | PTD | DIS | M4)) \
+                                       /* gpio_26 */\
        MUX_VAL(CP(ETK_D13_ES2),        (IEN  | PTD | DIS | M3)) \
-       MUX_VAL(CP(ETK_D14_ES2),        (IEN  | PTD | DIS | M3)) \
-       MUX_VAL(CP(ETK_D15_ES2),        (IEN  | PTD | DIS | M3)) \
+       MUX_VAL(CP(ETK_D14_ES2),        (IEN  | PTD | DIS | M4)) \
+       MUX_VAL(CP(ETK_D15_ES2),        (IEN  | PTD | DIS | M4)) \
+                                       /* gpio_29 */\
        /* Die to Die */\
        MUX_VAL(CP(D2D_MCAD34),         (IEN  | PTD | EN  | M0)) \
        MUX_VAL(CP(D2D_MCAD35),         (IEN  | PTD | EN  | M0)) \