/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
#include "ddr.h"
-extern unsigned int picos_to_mclk(unsigned int picos);
+#ifdef CONFIG_MPC85xx
+ #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
+#elif defined(CONFIG_MPC86xx)
+ #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
+#else
+ #error "Undefined _DDR_ADDR"
+#endif
+
+u32 fsl_ddr_get_version(void)
+{
+ ccsr_ddr_t *ddr;
+ u32 ver_major_minor_errata;
+
+ ddr = (void *)_DDR_ADDR;
+ ver_major_minor_errata = (in_be32(&ddr->ip_rev1) & 0xFFFF) << 8;
+ ver_major_minor_errata |= (in_be32(&ddr->ip_rev2) & 0xFF00) >> 8;
+
+ return ver_major_minor_errata;
+}
+
+unsigned int picos_to_mclk(unsigned int picos);
+
/*
* Determine Rtt value.
*
* Avoid writing for DDR I. The new PQ38 DDR controller
* dreams up non-zero default values to be backwards compatible.
*/
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
+static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
{
unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
/* Mode register set cycle time (tMRD). */
unsigned char tmrd_mclk;
-#if defined(CONFIG_FSL_DDR3)
+#ifdef CONFIG_FSL_DDR3
/*
* (tXARD and tXARDS). Empirical?
* The DDR3 spec has not tXARD,
* tAXPD=1, need design to confirm.
*/
int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
- act_pd_exit_mclk = picos_to_mclk(tXP);
- /* Mode register MR0[A12] is '1' - fast exit */
- pre_pd_exit_mclk = act_pd_exit_mclk;
- taxpd_mclk = 1;
tmrd_mclk = 4;
/* set the turnaround time */
trwt_mclk = 1;
+
+ if (popts->dynamic_power == 0) { /* powerdown is not used */
+ act_pd_exit_mclk = 1;
+ pre_pd_exit_mclk = 1;
+ taxpd_mclk = 1;
+ } else {
+ /* act_pd_exit_mclk = tXARD, see above */
+ act_pd_exit_mclk = picos_to_mclk(tXP);
+ /* Mode register MR0[A12] is '1' - fast exit */
+ pre_pd_exit_mclk = act_pd_exit_mclk;
+ taxpd_mclk = 1;
+ }
#else /* CONFIG_FSL_DDR2 */
/*
* (tXARD and tXARDS). Empirical?
/* DDR SDRAM Register Control Word */
static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
const common_timing_params_t *common_dimm)
{
if (common_dimm->all_DIMMs_registered
&& !common_dimm->all_DIMMs_unbuffered) {
- ddr->ddr_sdram_rcw_1 =
- common_dimm->rcw[0] << 28 | \
- common_dimm->rcw[1] << 24 | \
- common_dimm->rcw[2] << 20 | \
- common_dimm->rcw[3] << 16 | \
- common_dimm->rcw[4] << 12 | \
- common_dimm->rcw[5] << 8 | \
- common_dimm->rcw[6] << 4 | \
- common_dimm->rcw[7];
- ddr->ddr_sdram_rcw_2 =
- common_dimm->rcw[8] << 28 | \
- common_dimm->rcw[9] << 24 | \
- common_dimm->rcw[10] << 20 | \
- common_dimm->rcw[11] << 16 | \
- common_dimm->rcw[12] << 12 | \
- common_dimm->rcw[13] << 8 | \
- common_dimm->rcw[14] << 4 | \
- common_dimm->rcw[15];
+ if (popts->rcw_override) {
+ ddr->ddr_sdram_rcw_1 = popts->rcw_1;
+ ddr->ddr_sdram_rcw_2 = popts->rcw_2;
+ } else {
+ ddr->ddr_sdram_rcw_1 =
+ common_dimm->rcw[0] << 28 | \
+ common_dimm->rcw[1] << 24 | \
+ common_dimm->rcw[2] << 20 | \
+ common_dimm->rcw[3] << 16 | \
+ common_dimm->rcw[4] << 12 | \
+ common_dimm->rcw[5] << 8 | \
+ common_dimm->rcw[6] << 4 | \
+ common_dimm->rcw[7];
+ ddr->ddr_sdram_rcw_2 =
+ common_dimm->rcw[8] << 28 | \
+ common_dimm->rcw[9] << 24 | \
+ common_dimm->rcw[10] << 20 | \
+ common_dimm->rcw[11] << 16 | \
+ common_dimm->rcw[12] << 12 | \
+ common_dimm->rcw[13] << 8 | \
+ common_dimm->rcw[14] << 4 | \
+ common_dimm->rcw[15];
+ }
debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n", ddr->ddr_sdram_rcw_1);
debug("FSLDDR: ddr_sdram_rcw_2 = 0x%08x\n", ddr->ddr_sdram_rcw_2);
}
ecc_en = 0;
}
- rd_en = (common_dimm->all_DIMMs_registered
- && !common_dimm->all_DIMMs_unbuffered);
+ if (common_dimm->all_DIMMs_registered
+ && !common_dimm->all_DIMMs_unbuffered) {
+ rd_en = 1;
+ twoT_en = 0;
+ } else {
+ rd_en = 0;
+ twoT_en = popts->twoT_en;
+ }
sdram_type = CONFIG_FSL_SDRAM_TYPE;
}
threeT_en = popts->threeT_en;
- twoT_en = popts->twoT_en;
ba_intlv_ctl = popts->ba_intlv_ctl;
hse = popts->half_strength_driver_enable;
/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const unsigned int unq_mrs_en)
{
unsigned int frc_sr = 0; /* Force self refresh */
unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
obc_cfg = 0;
#endif
- ap_en = 0; /* Make this configurable? */
+ if (popts->registered_dimm_en) {
+ rcw_en = 1;
+ ap_en = popts->ap_en;
+ } else {
+ rcw_en = 0;
+ ap_en = 0;
+ }
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/* Use the DDR controller to auto initialize memory. */
- d_init = 1;
+ d_init = popts->ECC_init_using_memctl;
ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
#else
#if defined(CONFIG_FSL_DDR3)
md_en = popts->mirrored_dimm;
#endif
- rcw_en = popts->registered_dimm_en;
qd_en = popts->quad_rank_present ? 1 : 0;
ddr->ddr_sdram_cfg_2 = (0
| ((frc_sr & 0x1) << 31)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
| (qd_en << 9)
+ | (unq_mrs_en << 8)
| ((obc_cfg & 0x1) << 6)
| ((ap_en & 0x1) << 5)
| ((d_init & 0x1) << 4)
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const unsigned int unq_mrs_en)
{
unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
+ int i;
#if defined(CONFIG_FSL_DDR3)
unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
if (popts->rtt_override)
rtt_wr = popts->rtt_wr_override_value;
-
+ else
+ rtt_wr = popts->cs_local_opts[0].odt_rtt_wr;
esdmode2 = (0
| ((rtt_wr & 0x3) << 9)
| ((srt & 0x1) << 7)
| ((esdmode3 & 0xFFFF) << 0)
);
debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
+
+#ifdef CONFIG_FSL_DDR3
+ if (unq_mrs_en) { /* unique mode registers are supported */
+ for (i = 1; i < 4; i++) {
+ if (popts->rtt_override)
+ rtt_wr = popts->rtt_wr_override_value;
+ else
+ rtt_wr = popts->cs_local_opts[i].odt_rtt_wr;
+
+ esdmode2 &= 0xF9FF; /* clear bit 10, 9 */
+ esdmode2 |= (rtt_wr & 0x3) << 9;
+ switch (i) {
+ case 1:
+ ddr->ddr_sdram_mode_4 = (0
+ | ((esdmode2 & 0xFFFF) << 16)
+ | ((esdmode3 & 0xFFFF) << 0)
+ );
+ break;
+ case 2:
+ ddr->ddr_sdram_mode_6 = (0
+ | ((esdmode2 & 0xFFFF) << 16)
+ | ((esdmode3 & 0xFFFF) << 0)
+ );
+ break;
+ case 3:
+ ddr->ddr_sdram_mode_8 = (0
+ | ((esdmode2 & 0xFFFF) << 16)
+ | ((esdmode3 & 0xFFFF) << 0)
+ );
+ break;
+ }
+ }
+ debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n",
+ ddr->ddr_sdram_mode_4);
+ debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n",
+ ddr->ddr_sdram_mode_6);
+ debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n",
+ ddr->ddr_sdram_mode_8);
+ }
+#endif
}
/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
- unsigned int additive_latency)
+ unsigned int additive_latency,
+ const unsigned int unq_mrs_en)
{
unsigned short esdmode; /* Extended SDRAM mode */
unsigned short sdmode; /* SDRAM mode */
unsigned int rtt;
unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */
unsigned int al = 0; /* Posted CAS# additive latency (AL) */
- unsigned int dic = 1; /* Output driver impedance, 34ohm */
+ unsigned int dic = 0; /* Output driver impedance, 40ohm */
unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
1=Disable (Test/Debug) */
unsigned int wr_mclk;
const unsigned int mclk_ps = get_memory_clk_period_ps();
+ int i;
- rtt = fsl_ddr_get_rtt();
if (popts->rtt_override)
rtt = popts->rtt_override_value;
+ else
+ rtt = popts->cs_local_opts[0].odt_rtt_norm;
if (additive_latency == (cas_latency - 1))
al = 1;
if (additive_latency == (cas_latency - 2))
al = 2;
+ if (popts->quad_rank_present)
+ dic = 1; /* output driver impedance 240/7 ohm */
+
/*
* The esdmode value will also be used for writing
* MR1 during write leveling for DDR3, although the
);
debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
+
+ if (unq_mrs_en) { /* unique mode registers are supported */
+ for (i = 1; i < 4; i++) {
+ if (popts->rtt_override)
+ rtt = popts->rtt_override_value;
+ else
+ rtt = popts->cs_local_opts[i].odt_rtt_norm;
+
+ esdmode &= 0xFDBB; /* clear bit 9,6,2 */
+ esdmode |= (0
+ | ((rtt & 0x4) << 7) /* rtt field is split */
+ | ((rtt & 0x2) << 5) /* rtt field is split */
+ | ((rtt & 0x1) << 2) /* rtt field is split */
+ );
+ switch (i) {
+ case 1:
+ ddr->ddr_sdram_mode_3 = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+ break;
+ case 2:
+ ddr->ddr_sdram_mode_5 = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+ break;
+ case 3:
+ ddr->ddr_sdram_mode_7 = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+ break;
+ }
+ }
+ debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n",
+ ddr->ddr_sdram_mode_3);
+ debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
+ ddr->ddr_sdram_mode_5);
+ debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
+ ddr->ddr_sdram_mode_5);
+ }
}
#else /* !CONFIG_FSL_DDR3 */
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
- unsigned int additive_latency)
+ unsigned int additive_latency,
+ const unsigned int unq_mrs_en)
{
unsigned short esdmode; /* Extended SDRAM mode */
unsigned short sdmode; /* SDRAM mode */
}
/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
-static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
+static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency)
{
unsigned int rodt_on = 0; /* Read to ODT on */
unsigned int rodt_off = 0; /* Read to ODT off */
unsigned int wodt_off = 0; /* Write to ODT off */
#if defined(CONFIG_FSL_DDR3)
- rodt_on = 2; /* 2 clocks */
+ /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */
+ rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1;
rodt_off = 4; /* 4 clocks */
wodt_on = 1; /* 1 clocks */
wodt_off = 4; /* 4 clocks */
| ((zqoper & 0xF) << 16)
| ((zqcs & 0xF) << 8)
);
+ debug("FSLDDR: zq_cntl = 0x%08x\n", ddr->ddr_zq_cntl);
}
/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
/*
* Write leveling start time
* The value use for the DQS_ADJUST for the first sample
- * when write leveling is enabled.
+ * when write leveling is enabled. It probably needs to be
+ * overriden per platform.
*/
wrlvl_start = 0x8;
/*
| ((wrlvl_wlr & 0x7) << 8)
| ((wrlvl_start & 0x1F) << 0)
);
+ debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
}
/* DDR Self Refresh Counter (DDR_SR_CNTR) */
}
}
+static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+ ddr->ddr_cdr1 = popts->ddr_cdr1;
+ debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
+}
+
unsigned int
check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
{
unsigned int sr_it;
unsigned int zq_en;
unsigned int wrlvl_en;
+ unsigned int ip_rev = 0;
+ unsigned int unq_mrs_en = 0;
int cs_en = 1;
memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr);
+ set_timing_cfg_0(ddr, popts);
#endif
set_timing_cfg_3(ddr, common_dimm, cas_latency);
set_timing_cfg_2(ddr, popts, common_dimm,
cas_latency, additive_latency);
+ set_ddr_cdr1(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
+ ip_rev = fsl_ddr_get_version();
+ if (ip_rev > 0x40400)
+ unq_mrs_en = 1;
- set_ddr_sdram_cfg_2(ddr, popts);
+ set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency);
- set_ddr_sdram_mode_2(ddr, popts);
+ cas_latency, additive_latency, unq_mrs_en);
+ set_ddr_sdram_mode_2(ddr, popts, unq_mrs_en);
set_ddr_sdram_interval(ddr, popts, common_dimm);
set_ddr_data_init(ddr);
set_ddr_sdram_clk_cntl(ddr, popts);
set_ddr_init_addr(ddr);
set_ddr_init_ext_addr(ddr);
set_timing_cfg_4(ddr, popts);
- set_timing_cfg_5(ddr);
+ set_timing_cfg_5(ddr, cas_latency);
set_ddr_zq_cntl(ddr, zq_en);
set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
set_ddr_sr_cntr(ddr, sr_it);
- set_ddr_sdram_rcw(ddr, common_dimm);
+ set_ddr_sdram_rcw(ddr, popts, common_dimm);
return check_fsl_memctl_config_regs(ddr);
}
dimm_params_t *pdimm,
unsigned int ctrl_num);
+typedef struct {
+ unsigned int odt_rd_cfg;
+ unsigned int odt_wr_cfg;
+ unsigned int odt_rtt_norm;
+ unsigned int odt_rtt_wr;
+} dynamic_odt_t;
+
+static const dynamic_odt_t single_Q[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER, /* tied high */
+ DDR3_RTT_OFF,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER, /* tied high */
+ DDR3_RTT_OFF,
+ DDR3_RTT_120_OHM
+ }
+};
+
+static const dynamic_odt_t single_D[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const dynamic_odt_t single_S[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+};
+
+static const dynamic_odt_t dual_DD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ }
+};
+
+static const dynamic_odt_t dual_DS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0}
+};
+static const dynamic_odt_t dual_SD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_OFF
+ }
+};
+
+static const dynamic_odt_t dual_SS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0}
+};
+
+static const dynamic_odt_t dual_D0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const dynamic_odt_t dual_0D[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ }
+};
+
+static const dynamic_odt_t dual_S0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+
+};
+
+static const dynamic_odt_t dual_0S[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0}
+
+};
+
+static const dynamic_odt_t odt_unknown[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ }
+};
+
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int i;
char buffer[HWCONFIG_BUFFER_SIZE];
char *buf = NULL;
+ const dynamic_odt_t *pdodt = odt_unknown;
/*
* Extract hwconfig from environment since we have not properly setup
buf = buffer;
/* Chip select options. */
+ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+ switch (pdimm[0].n_ranks) {
+ case 1:
+ pdodt = single_S;
+ break;
+ case 2:
+ pdodt = single_D;
+ break;
+ case 4:
+ pdodt = single_Q;
+ break;
+ }
+ } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+ switch (pdimm[0].n_ranks) {
+ case 2:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_DD;
+ break;
+ case 1:
+ pdodt = dual_DS;
+ break;
+ case 0:
+ pdodt = dual_D0;
+ break;
+ }
+ break;
+ case 1:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_SD;
+ break;
+ case 1:
+ pdodt = dual_SS;
+ break;
+ case 0:
+ pdodt = dual_S0;
+ break;
+ }
+ break;
+ case 0:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_0D;
+ break;
+ case 1:
+ pdodt = dual_0S;
+ break;
+ }
+ break;
+ }
+ }
/* Pick chip-select local options. */
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- /* If not DDR2, odt_rd_cfg and odt_wr_cfg need to be 0. */
-
- /* only for single CS? */
- popts->cs_local_opts[i].odt_rd_cfg = 0;
-
- popts->cs_local_opts[i].odt_wr_cfg = 1;
+#if defined(CONFIG_FSL_DDR3)
+ popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
+ popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
+ popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
+ popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
+#else
+ popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+ popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+#endif
popts->cs_local_opts[i].auto_precharge = 0;
}
popts->twoT_en = 0;
popts->threeT_en = 0;
+ /* for RDIMM, address parity enable */
+ popts->ap_en = 1;
+
/*
* BSTTOPRE precharge interval
*
Hwconfig can be combined with multiple parameters, for example, on a supported
platform
-hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3
+hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
+
+Table for dynamic ODT for DDR3
+==============================
+For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may
+be needed, depending on the configuration. The numbers in the following tables are
+in Ohms.
+
+* denotes dynamic ODT
+
+Two slots system
++-----------------------+----------+---------------+-----------------------------+-----------------------------+
+| Configuration | |DRAM controller| Slot 1 | Slot 2 |
++-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
+| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
++ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
+| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 | off | off | off | off | off | 30 | 30 |
+| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | off | off | 30 | 30 | 120 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 | off | off | off | 20 | 20 | | |
+| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | off | off | 20 | 20 | 120 *| off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 *| off | | | off | off | 20 | 20 |
+|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | 20 | 20 | | | 120 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 *| off | | | 30 | 30 | | |
+|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | 30 | 30 | | | 120 *| off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Dual Rank | Empty | Slot 1 | off | 75 | 40 | off | off | off | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 40 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|Single Rank| Empty | Slot 1 | off | 75 | 40 | off | | | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty |Single Rank| Slot 2 | off | 75 | | | | | 40 | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+
+Single slot system
++-------------+------------+---------------+-----------------------------+-----------------------------+
+| | |DRAM controller| Rank 1 | Rank 2 | Rank 3 | Rank 4 |
+|Configuration| Write/Read |-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Write | Read | Write | Read | Write | Read | Write | Read | Write | Read |
++-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R1 | off | 75 | 120 *| off | off | off | 20 | 20 | off | off |
+| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R2 | off | 75 | off | 20 | 120 | off | 20 | 20 | off | off |
+| Quad Rank |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R3 | off | 75 | 20 | 20 | off | off | 120 *| off | off | off |
+| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R4 | off | 75 | 20 | 20 | off | off | off | 20 | 120 | off |
++-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R1 | off | 75 | 40 | off | off | off |
+| Dual Rank |------------+-------+-------+-------+------+-------+------+
+| | R2 | off | 75 | 40 | off | off | off |
++-------------+------------+-------+-------+-------+------+-------+------+
+| Single Rank | R1 | off | 75 | 40 | off |
++-------------+------------+-------+-------+-------+------+
+
+Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
+ http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
projects / u-boot.git / commitdiff