powerpc/85xx: Add 36-bit physical addressing support for P1_P2_RDB

Add support for 36-bit address map for NOR, SD, and SPI boot cfgs.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Priyanka Jain <priyanka.jain@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index d4b4b6811b1a86b04acfe4bb9f241ef646c2313d..307c3e2564d9182492573e1a7c63559f3fe8f75c 100644 (file)
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -107,6 +107,9 @@ int checkboard (void)
 
        cpu = gd->cpu;
        printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
+#ifdef CONFIG_PHYS_64BIT
+       puts ("(36-bit addrmap) \n");
+#endif
        setbits_be32(&pgpio->gpdir, GPIO_DIR);
 
 /*

diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c
index 9b166b2151c57e8bf190d153ca032dd0d54371a5..1847935a73761b646437c9299e321b818086ef6a 100644 (file)
--- a/board/freescale/p1_p2_rdb/tlb.c
+++ b/board/freescale/p1_p2_rdb/tlb.c
@@ -25,19 +25,20 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
        /* TLB 0 - for temp stack in cache */
-       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS,
                        MAS3_SX|MAS3_SW|MAS3_SR, 0,
                        0, 0, BOOKE_PAGESZ_4K, 0),
        SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-                       CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
                        MAS3_SX|MAS3_SW|MAS3_SR, 0,
                        0, 0, BOOKE_PAGESZ_4K, 0),
        SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-                       CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
                        MAS3_SX|MAS3_SW|MAS3_SR, 0,
                        0, 0, BOOKE_PAGESZ_4K, 0),
        SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-                       CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
                        MAS3_SX|MAS3_SW|MAS3_SR, 0,
                        0, 0, BOOKE_PAGESZ_4K, 0),
 

diff --git a/boards.cfg b/boards.cfg
index 45c3102b0d5abc38551dee79c4a43b823305021a..263c1e6dfe785a73f5d8d7d1ac479cbbf5f77465 100644 (file)
--- a/boards.cfg
+++ b/boards.cfg
@@ -509,15 +509,24 @@ MPC8572DS                    powerpc     mpc85xx     mpc8572ds           freesca
 MPC8572DS_36BIT              powerpc     mpc85xx     mpc8572ds           freescale      -           MPC8572DS:36BIT
 MPC8572DS_NAND               powerpc     mpc85xx     mpc8572ds           freescale      -           MPC8572DS:NAND
 P1011RDB                     powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB
+P1011RDB_36BIT               powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,36BIT
+P1011RDB_36BIT_SDCARD        powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,36BIT,SDCARD
+P1011RDB_36BIT_SPIFLASH      powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,36BIT,SPIFLASH
 P1011RDB_NAND                powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,NAND
 P1011RDB_SDCARD              powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,SDCARD
 P1011RDB_SPIFLASH            powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1011RDB,SPIFLASH
 P1020RDB                     powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB
+P1020RDB_36BIT               powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,36BIT
+P1020RDB_36BIT_SDCARD        powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,36BIT,SDCARD
+P1020RDB_36BIT_SPIFLASH      powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,36BIT,SPIFLASH
 P1020RDB_NAND                powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,NAND
 P1020RDB_SDCARD              powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,SDCARD
 P1020RDB_SPIFLASH            powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P1020RDB,SPIFLASH
 P1022DS                      powerpc     mpc85xx     p1022ds             freescale
 P2010RDB                     powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB
+P2010RDB_36BIT               powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,36BIT
+P2010RDB_36BIT_SDCARD        powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,36BIT,SDCARD
+P2010RDB_36BIT_SPIFLASH      powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,36BIT,SPIFLASH
 P2010RDB_NAND                powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,NAND
 P2010RDB_SDCARD              powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,SDCARD
 P2010RDB_SPIFLASH            powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2010RDB,SPIFLASH
@@ -525,6 +534,9 @@ P2020DS                      powerpc     mpc85xx     p2020ds             freesca
 P2020DS_36BIT                powerpc     mpc85xx     p2020ds             freescale      -           P2020DS:36BIT
 P2020DS_DDR2                 powerpc     mpc85xx     p2020ds             freescale      -           P2020DS:DDR2
 P2020RDB                     powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB
+P2020RDB_36BIT               powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,36BIT
+P2020RDB_36BIT_SDCARD        powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,36BIT,SDCARD
+P2020RDB_36BIT_SPIFLASH      powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,36BIT,SPIFLASH
 P2020RDB_NAND                powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,NAND
 P2020RDB_SDCARD              powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,SDCARD
 P2020RDB_SPIFLASH            powerpc     mpc85xx     p1_p2_rdb           freescale      -           P1_P2_RDB:P2020RDB,SPIFLASH

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 6f2088edd1a9098121fb434dfd17dd68f94e6143..4103e8b96bfc0320fa49073a24fe0ea2da3662bf 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -30,6 +30,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#ifdef CONFIG_36BIT
+#define CONFIG_PHYS_64BIT
+#endif
+
 #ifdef CONFIG_P1011RDB
 #define CONFIG_P1011
 #endif
@@ -123,6 +127,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP                        1
+#define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
+#endif
+
 #define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
@@ -144,7 +153,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * actual resources get mapped (not physical addresses)
  */
 #define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS        0xfffe00000ull
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR
+#endif
                                                        /* CCSRBAR */
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses */
                                                        /* CONFIG_SYS_IMMR */
@@ -197,13 +210,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_FLASH_BASE          0xef000000      /* start of FLASH 16M */
 
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS     0xfef000000ull
+#else
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
+#endif
 
 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
                                        BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM         0xff000ff7
 
-#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS}
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
@@ -231,6 +248,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR      0xffd00000       /* stack in RAM */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+       ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS  CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000      /* Size of used area in RAM */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE \
@@ -242,10 +271,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifndef CONFIG_NAND_SPL
 #define CONFIG_SYS_NAND_BASE           0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS      0xfffa00000ull
 #else
-#define CONFIG_SYS_NAND_BASE           0xfff00000
+#define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
 #endif
+#else
+#define CONFIG_SYS_NAND_BASE           0xfff00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS      0xffff00000ull
+#else
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
+#endif
+#endif
+
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define NAND_MAX_CHIPS                 1
@@ -292,7 +331,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_VSC7385_BASE        0xffb00000
 
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_VSC7385_BASE_PHYS   0xfffb00000ull
+#else
 #define CONFIG_SYS_VSC7385_BASE_PHYS   CONFIG_SYS_VSC7385_BASE
+#endif
 
 #define CONFIG_SYS_BR2_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE) \
                                                        | BR_PS_8 | BR_V)
@@ -376,23 +419,41 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 #define CONFIG_SYS_PCIE2_NAME          "Slot 1"
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS      0xc20000000ull
+#else
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
+#endif
 #define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE2_IO_VIRT       0xffc10000
 #define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS       0xfffc10000ull
+#else
 #define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
+#endif
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 #define CONFIG_SYS_PCIE1_NAME          "Slot 2"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc00000000ull
+#else
 #define CONFIG_SYS_PCIE1_MEM_BUS       0x80000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0x80000000
+#endif
 #define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT       0xffc00000
 #define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS       0xfffc00000ull
+#else
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xffc00000
+#endif
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */