iomux-v3: Place pad control definitions into common file

Instead of having the same PAD control definition in each MX6 variant pin file,
place it into a common location.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 9846f1bcb5a8fd15fe4e107a7912fc6dbfa187f1..0ed12f3f2b5c25661092008786acaaad5c3383cc 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -22,33 +22,6 @@
 
 #include <asm/imx-common/iomux-v3.h>
 
-/* Use to set PAD control */
-#define PAD_CTL_HYS            (1 << 16)
-#define PAD_CTL_PUS_100K_DOWN  (0 << 14)
-#define PAD_CTL_PUS_47K_UP     (1 << 14)
-#define PAD_CTL_PUS_100K_UP    (2 << 14)
-#define PAD_CTL_PUS_22K_UP     (3 << 14)
-
-#define PAD_CTL_PUE            (1 << 13)
-#define PAD_CTL_PKE            (1 << 12)
-#define PAD_CTL_ODE            (1 << 11)
-#define PAD_CTL_SPEED_LOW      (1 << 6)
-#define PAD_CTL_SPEED_MED      (2 << 6)
-#define PAD_CTL_SPEED_HIGH     (3 << 6)
-#define PAD_CTL_DSE_DISABLE    (0 << 3)
-#define PAD_CTL_DSE_240ohm     (1 << 3)
-#define PAD_CTL_DSE_120ohm     (2 << 3)
-#define PAD_CTL_DSE_80ohm      (3 << 3)
-#define PAD_CTL_DSE_60ohm      (4 << 3)
-#define PAD_CTL_DSE_48ohm      (5 << 3)
-#define PAD_CTL_DSE_40ohm      (6 << 3)
-#define PAD_CTL_DSE_34ohm      (7 << 3)
-#define PAD_CTL_SRE_FAST       (1 << 0)
-#define PAD_CTL_SRE_SLOW       (0 << 0)
-
-#define IOMUX_CONFIG_SION 0x10
-#define NO_MUX_I                0
-#define NO_PAD_I                0
 enum {
        MX6_PAD_CSI0_DAT10__UART1_TXD           = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
        MX6_PAD_CSI0_DAT11__UART1_RXD           = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),

diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index 1c1c00855f41bedaa34d5f21b01525f80d993c17..02a40d4f5c6cca27e6b0729ead032a70e23a9cd2 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -24,33 +24,6 @@
 
 #include <asm/imx-common/iomux-v3.h>
 
-/* Use to set PAD control */
-#define PAD_CTL_HYS            (1 << 16)
-#define PAD_CTL_PUS_100K_DOWN  (0 << 14)
-#define PAD_CTL_PUS_47K_UP     (1 << 14)
-#define PAD_CTL_PUS_100K_UP    (2 << 14)
-#define PAD_CTL_PUS_22K_UP     (3 << 14)
-
-#define PAD_CTL_PUE            (1 << 13)
-#define PAD_CTL_PKE            (1 << 12)
-#define PAD_CTL_ODE            (1 << 11)
-#define PAD_CTL_SPEED_LOW      (1 << 6)
-#define PAD_CTL_SPEED_MED      (2 << 6)
-#define PAD_CTL_SPEED_HIGH     (3 << 6)
-#define PAD_CTL_DSE_DISABLE    (0 << 3)
-#define PAD_CTL_DSE_240ohm     (1 << 3)
-#define PAD_CTL_DSE_120ohm     (2 << 3)
-#define PAD_CTL_DSE_80ohm      (3 << 3)
-#define PAD_CTL_DSE_60ohm      (4 << 3)
-#define PAD_CTL_DSE_48ohm      (5 << 3)
-#define PAD_CTL_DSE_40ohm      (6 << 3)
-#define PAD_CTL_DSE_34ohm      (7 << 3)
-#define PAD_CTL_SRE_FAST       (1 << 0)
-#define PAD_CTL_SRE_SLOW       (0 << 0)
-
-#define NO_MUX_I                0
-#define NO_PAD_I                0
-
 enum {
        MX6_PAD_SD2_DAT1__USDHC2_DAT1           = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
        MX6_PAD_SD2_DAT1__ECSPI5_SS0            = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),

diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 70bf3cdd8ffc317a6389d5fcc7c92e4782f7da4b..7b1580dde70f0ec1ce61855b3643b132a40a7835 100644 (file)
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -95,7 +95,32 @@ typedef u64 iomux_v3_cfg_t;
 #define GPIO_PORTE             (4 << GPIO_PORT_SHIFT)
 #define GPIO_PORTF             (5 << GPIO_PORT_SHIFT)
 
-#define MUX_CONFIG_SION                (0x1 << 4)
+#define PAD_CTL_HYS            (1 << 16)
+#define PAD_CTL_PUS_100K_DOWN  (0 << 14)
+#define PAD_CTL_PUS_47K_UP     (1 << 14)
+#define PAD_CTL_PUS_100K_UP    (2 << 14)
+#define PAD_CTL_PUS_22K_UP     (3 << 14)
+
+#define PAD_CTL_PUE            (1 << 13)
+#define PAD_CTL_PKE            (1 << 12)
+#define PAD_CTL_ODE            (1 << 11)
+#define PAD_CTL_SPEED_LOW      (1 << 6)
+#define PAD_CTL_SPEED_MED      (2 << 6)
+#define PAD_CTL_SPEED_HIGH     (3 << 6)
+#define PAD_CTL_DSE_DISABLE    (0 << 3)
+#define PAD_CTL_DSE_240ohm     (1 << 3)
+#define PAD_CTL_DSE_120ohm     (2 << 3)
+#define PAD_CTL_DSE_80ohm      (3 << 3)
+#define PAD_CTL_DSE_60ohm      (4 << 3)
+#define PAD_CTL_DSE_48ohm      (5 << 3)
+#define PAD_CTL_DSE_40ohm      (6 << 3)
+#define PAD_CTL_DSE_34ohm      (7 << 3)
+#define PAD_CTL_SRE_FAST       (1 << 0)
+#define PAD_CTL_SRE_SLOW       (0 << 0)
+
+#define IOMUX_CONFIG_SION      0x10
+#define NO_MUX_I               0
+#define NO_PAD_I               0
 
 void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,