armv8/ls104xa: remove the DDR interactive debugging info from SPL

Remove the DDR interactive debugging to reduce the size of spl image.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index f3b521d7051f4c5321cb48d2f6d370058040cb4d..6a345c04006ed5120dda6890613ace2fb8b0857d 100644 (file)
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS             0x51
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 8fa3bb3a64829451c5a3b96b712205a3c2ecf7cd..f185380ae3d6673e1efa4f6ca2816ec64ac7aac6 100644 (file)
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -29,7 +29,9 @@
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
 #define CONFIG_FSL_DDR_BIST
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 #define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index cba22ca2b6156973299f0ef978bb8ab4b4fddd92..4b3b21eaa1a63a00fd538ba7f0d1913efb95fce1 100644 (file)
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS             0x51
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index a96aa650f77a3dbdbb03f7e5503acbba782d7092..2141b8299aa4328829c693601fe57040e1082147 100644 (file)
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -34,7 +34,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define CONFIG_FSL_DDR_BIST    /* enable built-in memory test */
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg