--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/scan_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_scan_manager *scan_manager_base =
+ (void *)(SOCFPGA_SCANMGR_ADDRESS);
+static const struct socfpga_freeze_controller *freeze_controller_base =
+ (void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Function to check IO scan chain engine status and wait if the engine is
+ * is active. Poll the IO scan chain engine till maximum iteration reached.
+ */
+static inline uint32_t scan_chain_engine_is_idle(uint32_t max_iter)
+{
+ uint32_t scanmgr_status;
+
+ scanmgr_status = readl(&scan_manager_base->stat);
+
+ /* Poll the engine until the scan engine is inactive */
+ while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status) ||
+ (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) {
+ max_iter--;
+ if (max_iter > 0)
+ scanmgr_status = readl(&scan_manager_base->stat);
+ else
+ return 0;
+ }
+ return 1;
+}
+
+/* Program HPS IO Scan Chain */
+uint32_t scan_mgr_io_scan_chain_prg(
+ uint32_t io_scan_chain_id,
+ uint32_t io_scan_chain_len_in_bits,
+ const uint32_t *iocsr_scan_chain)
+{
+ uint16_t tdi_tdo_header;
+ uint32_t io_program_iter;
+ uint32_t io_scan_chain_data_residual;
+ uint32_t residual;
+ uint32_t i;
+ uint32_t index = 0;
+
+ /*
+ * De-assert reinit if the IO scan chain is intended for HIO. In
+ * this, its the chain 3.
+ */
+ if (io_scan_chain_id == 3)
+ clrbits_le32(&freeze_controller_base->hioctrl,
+ SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+ /*
+ * Check if the scan chain engine is inactive and the
+ * WFIFO is empty before enabling the IO scan chain
+ */
+ if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+ return 1;
+
+ /*
+ * Enable IO Scan chain based on scan chain id
+ * Note: only one chain can be enabled at a time
+ */
+ setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+
+ /*
+ * Calculate number of iteration needed for full 128-bit (4 x32-bits)
+ * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits
+ */
+ io_program_iter = io_scan_chain_len_in_bits >>
+ IO_SCAN_CHAIN_128BIT_SHIFT;
+ io_scan_chain_data_residual = io_scan_chain_len_in_bits &
+ IO_SCAN_CHAIN_128BIT_MASK;
+
+ /* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */
+ tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE |
+ (TDI_TDO_MAX_PAYLOAD << TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+ /* Program IO scan chain in 128-bit iteration */
+ for (i = 0; i < io_program_iter; i++) {
+ /* write TDI_TDO packet header to scan manager */
+ writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte);
+
+ /* calculate array index. Multiply by 4 as write 4 x 32bits */
+ index = i * 4;
+
+ /* write 4 successive 32-bit IO scan chain data into WFIFO */
+ writel(iocsr_scan_chain[index],
+ &scan_manager_base->fifo_quad_byte);
+ writel(iocsr_scan_chain[index + 1],
+ &scan_manager_base->fifo_quad_byte);
+ writel(iocsr_scan_chain[index + 2],
+ &scan_manager_base->fifo_quad_byte);
+ writel(iocsr_scan_chain[index + 3],
+ &scan_manager_base->fifo_quad_byte);
+
+ /*
+ * Check if the scan chain engine has completed the
+ * IO scan chain data shifting
+ */
+ if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+ goto error;
+ }
+
+ /* Calculate array index for final TDI_TDO packet */
+ index = io_program_iter * 4;
+
+ /* Final TDI_TDO packet if any */
+ if (io_scan_chain_data_residual) {
+ /*
+ * Calculate number of quad bytes FIFO write
+ * needed for the final TDI_TDO packet
+ */
+ io_program_iter = io_scan_chain_data_residual >>
+ IO_SCAN_CHAIN_32BIT_SHIFT;
+
+ /*
+ * Construct TDI_TDO packet for remaining IO
+ * scan chain (2 bytes)
+ */
+ tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE |
+ ((io_scan_chain_data_residual - 1) <<
+ TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+ /*
+ * Program the last part of IO scan chain write TDI_TDO packet
+ * header (2 bytes) to scan manager
+ */
+ writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte);
+
+ for (i = 0; i < io_program_iter; i++) {
+ /*
+ * write remaining scan chain data into scan
+ * manager WFIFO with 4 bytes write
+ */
+ writel(iocsr_scan_chain[index + i],
+ &scan_manager_base->fifo_quad_byte);
+ }
+
+ index += io_program_iter;
+ residual = io_scan_chain_data_residual &
+ IO_SCAN_CHAIN_32BIT_MASK;
+
+ if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) {
+ /*
+ * write the last 4B scan chain data
+ * into scan manager WFIFO
+ */
+ writel(iocsr_scan_chain[index],
+ &scan_manager_base->fifo_quad_byte);
+ } else {
+ /*
+ * write the remaining 1 - 3 bytes scan chain
+ * data into scan manager WFIFO byte by byte
+ * to prevent JTAG engine shifting unused data
+ * from the FIFO and mistaken the data as a
+ * valid command (even though unused bits are
+ * set to 0, but just to prevent hardware
+ * glitch)
+ */
+ for (i = 0; i < residual; i += 8) {
+ writel(((iocsr_scan_chain[index] >> i)
+ & IO_SCAN_CHAIN_BYTE_MASK),
+ &scan_manager_base->fifo_single_byte);
+ }
+ }
+
+ /*
+ * Check if the scan chain engine has completed the
+ * IO scan chain data shifting
+ */
+ if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+ goto error;
+ }
+
+ /* Disable IO Scan chain when configuration done*/
+ clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+ return 0;
+
+error:
+ /* Disable IO Scan chain when error detected */
+ clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+ return 1;
+}
+
+int scan_mgr_configure_iocsr(void)
+{
+ int status = 0;
+
+ /* configure the IOCSR through scan chain */
+ status |= scan_mgr_io_scan_chain_prg(0,
+ CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table);
+ status |= scan_mgr_io_scan_chain_prg(1,
+ CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table);
+ status |= scan_mgr_io_scan_chain_prg(2,
+ CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table);
+ status |= scan_mgr_io_scan_chain_prg(3,
+ CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table);
+ return status;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SCAN_MANAGER_H_
+#define _SCAN_MANAGER_H_
+
+struct socfpga_scan_manager {
+ u32 stat;
+ u32 en;
+ u32 padding[2];
+ u32 fifo_single_byte;
+ u32 fifo_double_byte;
+ u32 fifo_quad_byte;
+};
+
+/*
+ * Shift count to get number of IO scan chain data in granularity
+ * of 128-bit ( N / 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_SHIFT 7
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 128-bit ( N mod 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_MASK 0x7F
+
+/*
+ * Shift count to get number of IO scan chain
+ * data in granularity of 32-bit ( N / 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_SHIFT 5
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 32-bit ( N mod 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_MASK 0x1F
+
+/* Byte mask */
+#define IO_SCAN_CHAIN_BYTE_MASK 0xFF
+
+/* 24-bits (3 bytes) IO scan chain payload definition */
+#define IO_SCAN_CHAIN_PAYLOAD_24BIT 24
+
+/*
+ * Maximum length of TDI_TDO packet payload is 128 bits,
+ * represented by (length - 1) in TDI_TDO header
+ */
+#define TDI_TDO_MAX_PAYLOAD 127
+
+/* TDI_TDO packet header for IO scan chain program */
+#define TDI_TDO_HEADER_FIRST_BYTE 0x80
+
+/* Position of second command byte for TDI_TDO packet */
+#define TDI_TDO_HEADER_SECOND_BYTE_SHIFT 8
+
+/*
+ * Maximum polling loop to wait for IO scan chain engine
+ * becomes idle to prevent infinite loop
+ */
+#define SCAN_MAX_DELAY 100
+
+#define SCANMGR_STAT_ACTIVE_GET(x) (((x) & 0x80000000) >> 31)
+#define SCANMGR_STAT_WFIFOCNT_GET(x) (((x) & 0x70000000) >> 28)
+
+/*
+ * Program HPS IO Scan Chain
+ * io_scan_chain_id - IO scan chain ID
+ * io_scan_chain_len_in_bits - IO scan chain length in bits
+ * iocsr_scan_chain - IO scan chain table
+ */
+uint32_t scan_mgr_io_scan_chain_prg(
+ uint32_t io_scan_chain_id,
+ uint32_t io_scan_chain_len_in_bits,
+ const uint32_t *iocsr_scan_chain);
+
+extern const uint32_t iocsr_scan_chain0_table[
+ ((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain1_table[
+ ((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain2_table[
+ ((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain3_table[
+ ((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)];
+
+#endif /* _SCAN_MANAGER_H_ */
projects / u-boot.git / commitdiff