i.MX31: fixed CTRL-C detection

The Register URXD contains status information in bits [15..8].
With status bit 15 set, CTRL-C was reported as 0x8003 instead
of 0x03. Therefore CTRL-C was not detected.
To solve this, bits [15..8] were masked out now.

Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>

diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
index 1cad8f9d8c57e42a788ac9e96742017bfdb23381..f498599419d8e5743d0cac394736e8121dd68b38 100644 (file)
--- a/cpu/arm1136/mx31/serial.c
+++ b/cpu/arm1136/mx31/serial.c
@@ -63,6 +63,7 @@
 #define  URXD_FRMERR     (1<<12)
 #define  URXD_BRK        (1<<11)
 #define  URXD_PRERR      (1<<10)
+#define  URXD_RX_DATA    (0xFF)
 #define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
 #define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
 #define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
@@ -165,7 +166,7 @@ void serial_setbrg (void)
 int serial_getc (void)
 {
        while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
-       return __REG(UART_PHYS + URXD);
+       return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from upper word */
 }
 
 void serial_putc (const char c)