T: git git://git.denx.de/u-boot-mpc86xx.git
F: arch/powerpc/cpu/mpc86xx/
-POWERPC PPC74XX PPC7XX
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-T: git git://git.denx.de/u-boot-74xx-7xx.git
-F: arch/powerpc/cpu/74xx_7xx/
-
POWERPC PPC4XX
M: Stefan Roese <sr@denx.de>
S: Maintained
LIST_86xx="$(targets_by_cpu mpc86xx)"
-#########################################################################
-## 74xx/7xx Systems
-#########################################################################
-
-LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
-
#########################################################################
## PowerPC groups
#########################################################################
${LIST_85xx} \
${LIST_86xx} \
${LIST_4xx} \
- ${LIST_74xx_7xx}\
"
# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
/lib Architecture specific library files
/powerpc Files generic to PowerPC architecture
/cpu CPU specific files
- /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xxx Files specific to Freescale MPC5xxx CPUs
/mpc8xx Files specific to Freescale MPC8xx CPUs
choice
prompt "CPU select"
-config 74xx_7xx
- bool "74xx"
-
config MPC512X
bool "MPC512X"
endchoice
-source "arch/powerpc/cpu/74xx_7xx/Kconfig"
source "arch/powerpc/cpu/mpc512x/Kconfig"
source "arch/powerpc/cpu/mpc5xx/Kconfig"
source "arch/powerpc/cpu/mpc5xxx/Kconfig"
+++ /dev/null
-menu "74xx_7xx CPU"
- depends on 74xx_7xx
-
-config SYS_CPU
- default "74xx_7xx"
-
-choice
- prompt "Target select"
-
-config TARGET_P3G4
- bool "Support P3G4"
-
-config TARGET_ZUMA
- bool "Support ZUMA"
-
-config TARGET_PPMC7XX
- bool "Support ppmc7xx"
-
-config TARGET_ELPPC
- bool "Support ELPPC"
-
-config TARGET_MPC7448HPC2
- bool "Support mpc7448hpc2"
-
-endchoice
-
-source "board/eltec/elppc/Kconfig"
-source "board/evb64260/Kconfig"
-source "board/freescale/mpc7448hpc2/Kconfig"
-source "board/ppmc7xx/Kconfig"
-
-endmenu
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-obj-y = cache.o kgdb.o io.o
-obj-y += traps.o cpu.o cpu_init.o speed.o interrupts.o
+++ /dev/null
-#include <config.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CACHE_LINE_SIZE
-# define CACHE_LINE_SIZE L1_CACHE_BYTES
-#endif
-
-#if CACHE_LINE_SIZE == 128
-#define LG_CACHE_LINE_SIZE 7
-#elif CACHE_LINE_SIZE == 32
-#define LG_CACHE_LINE_SIZE 5
-#elif CACHE_LINE_SIZE == 16
-#define LG_CACHE_LINE_SIZE 4
-#elif CACHE_LINE_SIZE == 8
-#define LG_CACHE_LINE_SIZE 3
-#else
-# error "Invalid cache line size!"
-#endif
-
-/*
- * Invalidate L1 instruction cache.
- */
-_GLOBAL(invalidate_l1_instruction_cache)
- mfspr r3,PVR
- rlwinm r3,r3,16,16,31
- cmpi 0,r3,1
- beqlr /* for 601, do nothing */
- /* 603/604 processor - use invalidate-all bit in HID0 */
- mfspr r3,HID0
- ori r3,r3,HID0_ICFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Invalidate L1 data cache.
- */
-_GLOBAL(invalidate_l1_data_cache)
- mfspr r3,HID0
- ori r3,r3,HID0_DCFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Flush data cache.
- */
-_GLOBAL(flush_dcache)
- lis r3,0
- lis r5,CACHE_LINE_SIZE
-flush:
- cmp 0,1,r3,r5
- bge done
- lwz r5,0(r3)
- lis r5,CACHE_LINE_SIZE
- addi r3,r3,0x4
- b flush
-done:
- blr
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5 /* align r3 down to cache line */
- subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
- add r4,r4,r5 /* r4 += cache_line_size-1 */
- srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
- beqlr /* if r4 == 0 return */
- mtctr r4 /* ctr = r4 */
-
- sync
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbf 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbf's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_page_to_ram(void *page)
- */
-_GLOBAL(__flush_page_to_ram)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Flush a particular page from the instruction cache.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_icache_page(void *page)
- */
-_GLOBAL(__flush_icache_page)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
-1: icbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Clear a page using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- */
-_GLOBAL(clear_page)
- li r0,4096/CACHE_LINE_SIZE
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- blr
-
-/*
- * Enable L1 Instruction cache
- */
-_GLOBAL(icache_enable)
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Disable L1 Instruction cache
- */
-_GLOBAL(icache_disable)
- mflr r4
- bl invalidate_l1_instruction_cache /* uses r3 */
- sync
- mtlr r4
- mfspr r3, HID0
- li r5, 0
- ori r5, r5, HID0_ICE
- andc r3, r3, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Is instruction cache enabled?
- */
-_GLOBAL(icache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_ICE
- blr
-
-
-_GLOBAL(l1dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
-/*
- * Enable data cache(s) - L1 and optionally L2
- * Calls l2cache_enable. LR saved in r5
- */
-_GLOBAL(dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- mflr r5
- bl l2cache_enable /* uses r3 and r4 */
- sync
- mtlr r5
-#endif
- blr
-
-
-/*
- * Disable data cache(s) - L1 and optionally L2
- * Calls flush_dcache and l2cache_disable_no_flush.
- * LR saved in r4
- */
-_GLOBAL(dcache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- li r5, HID0_DCE|HID0_DCFI
- andc r3, r3, r5 /* no enable, no invalidate */
- mtspr HID0, r3
- sync
-#ifdef CONFIG_SYS_L2
- bl l2cache_disable_no_flush /* uses r3 */
-#endif
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Is data cache enabled?
- */
-_GLOBAL(dcache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_DCE
- blr
-
-/*
- * Invalidate L2 cache using L2I and polling L2IP or L2I
- */
-_GLOBAL(l2cache_invalidate)
- sync
- mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- sync
- mtspr l2cr, r3
- sync
- mfspr r3, PVR
- sync
- rlwinm r3, r3, 16,16,31
- cmpli 0,r3,0x8000 /* 7451, 7441 */
- beq 0,inv_7450
- cmpli 0,r3,0x8001 /* 7455, 7445 */
- beq 0,inv_7450
- cmpli 0,r3,0x8002 /* 7457, 7447 */
- beq 0,inv_7450
- cmpli 0,r3,0x8003 /* 7447A */
- beq 0,inv_7450
- cmpli 0,r3,0x8004 /* 7448 */
- beq 0,inv_7450
-invl2:
- mfspr r3, l2cr
- andi. r3, r3, L2CR_L2IP
- bne invl2
- /* turn off the global invalidate bit */
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 11, 9
- sync
- mtspr l2cr, r3
- sync
- blr
-inv_7450:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne inv_7450
- blr
-
-/*
- * Enable L2 cache
- * Calls l2cache_invalidate. LR is saved in r4
- */
-_GLOBAL(l2cache_enable)
- mflr r4 /* save link register */
- bl l2cache_invalidate /* uses r3 */
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Disable L2 cache
- * Calls flush_dcache. LR is saved in r4
- */
-_GLOBAL(l2cache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mtlr r4 /* restore link register */
-l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- isync
- blr
+++ /dev/null
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mstring
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * cpu.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- *
- * more modifications by
- * Josh Huber <huber@mclx.com>
- * added support for the 74xx series of cpus
- * added support for the 7xx series of cpus
- * made the code a little less hard-coded, and more auto-detectish
- */
-
-#include <common.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-cpu_t
-get_cpu_type(void)
-{
- uint pvr = get_pvr();
- cpu_t type;
-
- type = CPU_UNKNOWN;
-
- switch (PVR_VER(pvr)) {
- case 0x000c:
- type = CPU_7400;
- break;
- case 0x0008:
- type = CPU_750;
-
- if (((pvr >> 8) & 0xff) == 0x01) {
- type = CPU_750CX; /* old CX (80100 and 8010x?)*/
- } else if (((pvr >> 8) & 0xff) == 0x22) {
- type = CPU_750CX; /* CX (82201,82202) and CXe (82214) */
- } else if (((pvr >> 8) & 0xff) == 0x33) {
- type = CPU_750CX; /* CXe (83311) */
- } else if (((pvr >> 12) & 0xF) == 0x3) {
- type = CPU_755;
- }
- break;
-
- case 0x7000:
- type = CPU_750FX;
- break;
-
- case 0x7002:
- type = CPU_750GX;
- break;
-
- case 0x800C:
- type = CPU_7410;
- break;
-
- case 0x8000:
- type = CPU_7450;
- break;
-
- case 0x8001:
- type = CPU_7455;
- break;
-
- case 0x8002:
- type = CPU_7457;
- break;
-
- case 0x8003:
- type = CPU_7447A;
- break;
-
- case 0x8004:
- type = CPU_7448;
- break;
-
- default:
- break;
- }
-
- return type;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if !defined(CONFIG_BAB7xx)
-int checkcpu (void)
-{
- uint type = get_cpu_type();
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
- char *str;
-
- puts ("CPU: ");
-
- switch (type) {
- case CPU_750CX:
- printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"",
- (pvr>>8) & 0xf,
- pvr & 0xf);
- goto PR_CLK;
-
- case CPU_750:
- str = "750";
- break;
-
- case CPU_750FX:
- str = "750FX";
- break;
-
- case CPU_750GX:
- str = "750GX";
- break;
-
- case CPU_755:
- str = "755";
- break;
-
- case CPU_7400:
- str = "MPC7400";
- break;
-
- case CPU_7410:
- str = "MPC7410";
- break;
-
- case CPU_7447A:
- str = "MPC7447A";
- break;
-
- case CPU_7448:
- str = "MPC7448";
- break;
-
- case CPU_7450:
- str = "MPC7450";
- break;
-
- case CPU_7455:
- str = "MPC7455";
- break;
-
- case CPU_7457:
- str = "MPC7457";
- break;
-
- default:
- printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
- return -1;
- }
-
- printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF);
-PR_CLK:
- printf (" @ %s MHz\n", strmhz(buf, clock));
-
- return (0);
-}
-#endif
-/* these two functions are unimplemented currently [josh] */
-
-/* -------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int
-checkicache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int
-checkdcache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline void
-soft_restart(unsigned long addr)
-{
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-
- __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
- __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
- __asm__ __volatile__ ("mtspr 27, 4");
- __asm__ __volatile__ ("rfi");
-
- while(1); /* not reached */
-}
-
-
-#if !defined(CONFIG_BAB7xx) && \
- !defined(CONFIG_ELPPC) && \
- !defined(CONFIG_PPMC7XX)
-/* no generic way to do board reset. simply call soft_reset. */
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr;
- /* flush and disable I/D cache */
- __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
- __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
- __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
- __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 4");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 5");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
-
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on your
- * system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- soft_restart(addr);
-
- /* not reached */
- while(1)
- ;
-
- return 1;
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
- */
-#ifndef CONFIG_SYS_BUS_CLK
-#define CONFIG_SYS_BUS_CLK gd->bus_clk
-#endif
-
-unsigned long get_tbclk(void)
-{
- return CONFIG_SYS_BUS_CLK / 4;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-#if !defined(CONFIG_BAB7xx)
-void
-watchdog_reset(void)
-{
-
-}
-#endif /* !CONFIG_BAB7xx */
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_OF_LIBFDT
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- fdt_fixup_ethernet(blob);
-}
-#endif
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * cpu_init.c - low level cpu init
- *
- * there's really nothing going on here yet. future work area?
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-
-/*
- * Breath some life into the CPU...
- *
- * there's basically nothing to do here since the memory controller
- * isn't on the CPU in this case.
- */
-void
-cpu_init_f (void)
-{
- switch (get_cpu_type()) {
- case CPU_7450:
- case CPU_7455:
- case CPU_7457:
- case CPU_7447A:
- case CPU_7448:
- /* enable the timebase bit in HID0 */
- set_hid0(get_hid0() | 0x4000000);
- break;
- default:
- /* do nothing */
- break;
- }
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-#include <command.h>
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- debug("interrupt_init: GT main cause reg: %08x:%08x\n",
- GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
- debug("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
- debug("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
- debug("interrupt_init: setting decrementer_count\n");
-
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void
-external_interrupt(struct pt_regs *regs)
-{
- puts("external_interrupt (oops!)\n");
-}
-
-volatile ulong timestamp = 0;
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void
-timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-
-}
-
-void
-irq_free_handler(int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[])
-{
- puts("IRQ related functions are unimplemented currently.\n");
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
+++ /dev/null
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3,0
- addis r4,r0,0x0040
-kgdb_flush_loop:
- lwz r5,0(r3)
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- cmp 0,0,r3,r4
- bne kgdb_flush_loop
- SYNC
- mfspr r3,1008
- ori r3,r3,0x8800
- mtspr 1008,r3
- sync
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern unsigned long get_board_bus_clk (void);
-
-static const int hid1_multipliers_x_10[] = {
- 25, /* 0000 - 2.5x */
- 75, /* 0001 - 7.5x */
- 70, /* 0010 - 7x */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 65, /* 0101 - 6.5x */
- 100, /* 0110 - 10x */
- 45, /* 0111 - 4.5x */
- 30, /* 1000 - 3x */
- 55, /* 1001 - 5.5x */
- 40, /* 1010 - 4x */
- 50, /* 1011 - 5x */
- 80, /* 1100 - 8x */
- 60, /* 1101 - 6x */
- 35, /* 1110 - 3.5x */
- 0 /* 1111 - off */
-};
-
-/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
-static const int hid1_74xx_multipliers_x_10[] = {
- 115, /* 00000 - 11.5x */
- 170, /* 00001 - 17x */
- 75, /* 00010 - 7.5x */
- 150, /* 00011 - 15x */
- 70, /* 00100 - 7x */
- 180, /* 00101 - 18x */
- 10, /* 00110 - bypass */
- 200, /* 00111 - 20x */
- 20, /* 01000 - 2x */
- 210, /* 01001 - 21x */
- 65, /* 01010 - 6.5x */
- 130, /* 01011 - 13x */
- 85, /* 01100 - 8.5x */
- 240, /* 01101 - 24x */
- 95, /* 01110 - 9.5x */
- 90, /* 01111 - 9x */
- 30, /* 10000 - 3x */
- 105, /* 10001 - 10.5x */
- 55, /* 10010 - 5.5x */
- 110, /* 10011 - 11x */
- 40, /* 10100 - 4x */
- 100, /* 10101 - 10x */
- 50, /* 10110 - 5x */
- 120, /* 10111 - 12x */
- 80, /* 11000 - 8x */
- 140, /* 11001 - 14x */
- 60, /* 11010 - 6x */
- 160, /* 11011 - 16x */
- 135, /* 11100 - 13.5x */
- 280, /* 11101 - 28x */
- 0, /* 11110 - off */
- 125 /* 11111 - 12.5x */
-};
-
-static const int hid1_fx_multipliers_x_10[] = {
- 00, /* 0000 - off */
- 00, /* 0001 - off */
- 10, /* 0010 - bypass */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 25, /* 0101 - 2.5x */
- 30, /* 0110 - 3x */
- 35, /* 0111 - 3.5x */
- 40, /* 1000 - 4x */
- 45, /* 1001 - 4.5x */
- 50, /* 1010 - 5x */
- 55, /* 1011 - 5.5x */
- 60, /* 1100 - 6x */
- 65, /* 1101 - 6.5x */
- 70, /* 1110 - 7x */
- 75, /* 1111 - 7.5 */
- 80, /* 10000 - 8x */
- 85, /* 10001 - 8.5x */
- 90, /* 10010 - 9x */
- 95, /* 10011 - 9.5x */
- 100, /* 10100 - 10x */
- 110, /* 10101 - 11x */
- 120, /* 10110 - 12x */
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2)
- *
- * (Approx. GCLK frequency in Hz)
- */
-
-int get_clocks (void)
-{
- ulong clock = 0;
-
-#ifdef CONFIG_SYS_BUS_CLK
- gd->bus_clk = CONFIG_SYS_BUS_CLK; /* bus clock is a fixed frequency */
-#else
- gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
-#endif
-
- /* calculate the clock frequency based upon the CPU type */
- switch (get_cpu_type()) {
- case CPU_7447A:
- case CPU_7448:
- case CPU_7455:
- case CPU_7457:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
- break;
-
- case CPU_750GX:
- case CPU_750FX:
- clock = (gd->bus_clk / 10) *
- hid1_fx_multipliers_x_10[get_hid1 () >> 27];
- break;
-
- case CPU_7450:
- case CPU_740:
- case CPU_740P:
- case CPU_745:
- case CPU_750CX:
- case CPU_750:
- case CPU_750P:
- case CPU_755:
- case CPU_7400:
- case CPU_7410:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_multipliers_x_10[get_hid1 () >> 28];
- break;
-
- case CPU_UNKNOWN:
- printf ("get_gclk_freq(): unknown CPU type\n");
- clock = 0;
- return (1);
- }
-
- gd->cpu_clk = clock;
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2001 Josh Huber <huber@mclx.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfff00100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(__bss_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- b boot_cold
-
- /* the boot code is located below the exception table */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /*
- * On the MPC8xx, this is a software emulation interrupt. It
- * occurs for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x2000
-
-boot_cold:
- /* disable everything */
- li r0, 0
- mtspr HID0, r0
- sync
- mtmsr 0
- bl invalidate_bats
- sync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#endif
-#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx)
- .long 0x7e00066c
- /*
- * dssall instruction, gas doesn't have it yet
- * ...for altivec, data stream stop all this probably
- * isn't needed unless we warm (software) reboot U-Boot
- */
-#endif
-
-#ifdef CONFIG_SYS_L2
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-#ifdef CONFIG_SYS_BOARD_ASM_INIT
- /* do early init */
- bl board_asm_init
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*------------------------------------------------------*/
-
- /* perform low-level init */
- /* sdram init, galileo init, etc */
- /* r3: NHR bit from HID0 */
-
- /* setup the bats */
- bl setup_bats
- sync
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * This means:
- * 1) for the EVB, original gt regs need to be mapped
- * 2) need to have an IBAT for the 0xf region,
- * we are running there!
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- * The init-mem BAT can be reused after reloc. The old
- * gt-regs BAT can be reused after board_init_f calls
- * board_early_init_f (EVB only).
- */
-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
- /* enable address translation */
- bl enable_addr_trans
- sync
-
- /* enable and invalidate the data cache */
- bl l1dcache_enable
- sync
-#endif
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- /* run low-level CPU init code (from Flash) */
- bl cpu_init_f
- sync
-
- /* run 1st part of board init code (from Flash) */
- bl board_init_f
- sync
-
- /* NOTREACHED - board_init_f() does not return */
-
- .globl invalidate_bats
-invalidate_bats:
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-#endif
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-#endif
- isync
- sync
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- addis r3, r0, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- /* DBAT 0 */
- addis r4, r0, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- addis r3, r0, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- /* IBAT 1 */
- addis r4, r0, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- addis r3, r0, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- /* DBAT 1 */
- addis r4, r0, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- addis r3, r0, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- /* IBAT 2 */
- addis r4, r0, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- addis r3, r0, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- /* DBAT 2 */
- addis r4, r0, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- addis r3, r0, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- /* IBAT 3 */
- addis r4, r0, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- addis r3, r0, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- addis r4, r0, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- addis r3, r0, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CONFIG_SYS_IBAT4L@h
- ori r4, r4, CONFIG_SYS_IBAT4L@l
- addis r3, r0, CONFIG_SYS_IBAT4U@h
- ori r3, r3, CONFIG_SYS_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
- isync
-
- /* DBAT 4 */
- addis r4, r0, CONFIG_SYS_DBAT4L@h
- ori r4, r4, CONFIG_SYS_DBAT4L@l
- addis r3, r0, CONFIG_SYS_DBAT4U@h
- ori r3, r3, CONFIG_SYS_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
- isync
-
- /* IBAT 5 */
- addis r4, r0, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- addis r3, r0, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- addis r4, r0, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- addis r3, r0, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- addis r4, r0, CONFIG_SYS_IBAT6L@h
- ori r4, r4, CONFIG_SYS_IBAT6L@l
- addis r3, r0, CONFIG_SYS_IBAT6U@h
- ori r3, r3, CONFIG_SYS_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- addis r4, r0, CONFIG_SYS_DBAT6L@h
- ori r4, r4, CONFIG_SYS_DBAT6L@l
- addis r3, r0, CONFIG_SYS_DBAT6U@h
- ori r3, r3, CONFIG_SYS_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
- /* IBAT 7 */
- addis r4, r0, CONFIG_SYS_IBAT7L@h
- ori r4, r4, CONFIG_SYS_IBAT7L@l
- addis r3, r0, CONFIG_SYS_IBAT7U@h
- ori r3, r3, CONFIG_SYS_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- addis r4, r0, CONFIG_SYS_DBAT7L@h
- ori r4, r4, CONFIG_SYS_DBAT7L@l
- addis r3, r0, CONFIG_SYS_DBAT7U@h
- ori r3, r3, CONFIG_SYS_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
-
- /* bats are done, now invalidate the TLBs */
-
- addis r3, 0, 0x0000
- addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */
-
- isync
-
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt tlblp
-
- blr
-
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
- .globl dc_read
-dc_read:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*-----------------------------------------------------------------------*/
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-#ifdef CONFIG_ECC
- bl board_relocate_rom
- sync
- mr r3, r10 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-#else
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-#endif
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-#ifdef CONFIG_ECC
- bl board_init_ecc
-#endif
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- cmpwi r0,0
- add r0,r0,r11
- stw r4,0(r3)
- beq- 5f
- stw r0,0(r4)
-5: bdnz 3b
-4:
-/* clear_bss: */
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(__bss_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r10 /* Destination Address */
-#if defined(CONFIG_PPMC7XX)
- mr r4, r9 /* Use RAM copy of the global data */
-#endif
- bl after_reloc
-
- /* not reached - end relocate_code */
-/*-----------------------------------------------------------------------*/
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- /* enable execptions from RAM vectors */
- mfmsr r7
- li r8,MSR_IP
- andc r7,r7,r8
- mtmsr r7
-
- mtlr r4 /* restore link register */
- blr
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, 0x1000
- sync
- mtspr HID0, r0
- sync
- blr
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-
- /* Unlock the data cache and invalidate it */
- mfspr r0, HID0
- li r3,0x1000
- andc r0,r0,r3
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
+++ /dev/null
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-static void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
- " %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP:"
- " %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-static void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void ProgramCheckException(struct pt_regs *regs)
-{
- unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
- int i, j;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
-
- p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0);
- p -= 32;
- for (i = 0; i < 256; i+=16) {
- printf("%08x: ", (unsigned int)p+i);
- for (j = 0; j < 16; j++) {
- printf("%02x ", p[i+j]);
- }
- printf("\n");
- }
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2010 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
#if defined(CONFIG_4xx)
u32 uart_clk;
#endif /* CONFIG_4xx */
-#if defined(CONFIG_SYS_GT_6426x)
- unsigned int mirror_hack[16];
-#endif
#ifdef CONFIG_SYS_FPGA_COUNT
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
#endif
+++ /dev/null
-if TARGET_ELPPC
-
-config SYS_BOARD
- default "elppc"
-
-config SYS_VENDOR
- default "eltec"
-
-config SYS_CONFIG_NAME
- default "ELPPC"
-
-endif
+++ /dev/null
-ELPPC BOARD
-#M: -
-S: Maintained
-F: board/eltec/elppc/
-F: include/configs/ELPPC.h
-F: configs/ELPPC_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = elppc.o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
-obj-y += asm_init.o
+++ /dev/null
-/*
- * (C) Copyright 2001 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * ELTEC ELPPC RAM initialization
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <asm/processor.h>
-#include <version.h>
-#include <mpc106.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-.globl board_asm_init
-board_asm_init:
-
-/*
- * setup pointer to message block
- */
- mflr r13 /* save away link register */
- bl get_lnk_reg /* r3=addr of next instruction */
- subi r4, r3, 8 /* r4=board_asm_init addr */
- addi r29, r4, (MessageBlock-board_asm_init)
-
-/*
- * dcache_disable
- */
- mfspr r3, HID0
- li r4, HID0_DCE
- andc r3, r3, r4
- mr r2, r3
- ori r3, r3, HID0_DCI
- sync
- mtspr HID0, r3
- mtspr HID0, r2
- isync
- sync
-/*
- * icache_disable
- */
- mfspr r3, HID0
- li r4, 0
- ori r4, r4, HID0_ICE
- andc r3, r3, r4
- sync
- mtspr HID0, r3
-/*
- * invalidate caches
- */
- ori r3, r3, (HID0_ICE | HID0_ICFI | HID0_DCI | HID0_DCE)
- or r4, r4, r3
- isync
- mtspr HID0, r4
- andc r4, r4, r3
- isync
- mtspr HID0, r4
- isync
-/*
- * icache_enable
- */
- mfspr r3, HID0
- ori r3, r3, (HID0_ICE | HID0_ICFI)
- sync
- mtspr HID0, r3
-
-
-/*
- * setup memory controller
- */
- lis r1, MPC106_REG_ADDR@h
- ori r1, r1, MPC106_REG_ADDR@l
- lis r2, MPC106_REG_DATA@h
- ori r2, r2, MPC106_REG_DATA@l
-
- /* Configure PICR1 */
- lis r3, MPC106_REG@h
- ori r3, r3, PCI_PICR1
- stwbrx r3, 0, r1
- addis r3, r0, 0xFF14
- ori r3, r3, 0x1CC8
- eieio
- stwbrx r3, 0, r2
-
- /* Configure PICR2 */
- lis r3, MPC106_REG@h
- ori r3, r3, PCI_PICR2
- stwbrx r3, 0, r1
- addis r3, r0, 0x0000
- ori r3, r3, 0x0000
- eieio
- stwbrx r3, 0, r2
-
- /* Configure EUMBAR */
- lis r3, MPC106_REG@h
- ori r3, r3, 0x0078 /* offest of EUMBAR in PCI config space */
- stwbrx r3, 0, r1
- lis r3, MPC107_EUMB_ADDR@h
- eieio
- stwbrx r3, 0, r2
-
- /* Configure Address Map B Option Reg */
- lis r3, MPC106_REG@h
- ori r3, r3, 0x00e0 /* offest of AMBOR in PCI config space */
- stwbrx r3, 0, r1
- lis r3, 0
- eieio
- stwbrx r3, 0, r2
-
- /* Configure I2C Controller */
- lis r14, MPC107_I2C_ADDR@h /* base of I2C controller */
- ori r14, r14, MPC107_I2C_ADDR@l
- lis r3, 0x2b10 /* I2C clock = 100MHz/1024 */
- stw r3, 4(r14)
- li r3, 0 /* clear arbitration */
- eieio
- stw r3, 12(r14)
-
- /* Configure MCCR1 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR1
- stwbrx r3, 0, r1
- addis r3, r0, 0x0660 /* don't set MEMGO now ! */
- ori r3, r3, 0x0000
- eieio
- stwbrx r3, 0, r2
-
- /* Configure MCCR2 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR2
- stwbrx r3, 0, r1
- addis r3, r0, 0x0400
- ori r3, r3, 0x1800
- eieio
- stwbrx r3, 0, r2
-
-
- /* Configure MCCR3 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR3
- stwbrx r3, 0, r1
- addis r3, r0, 0x0230
- ori r3, r3, 0x0000
- eieio
- stwbrx r3, 0, r2
-
- /* Configure MCCR4 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR4
- stwbrx r3, 0, r1
- addis r3, r0, 0x2532
- ori r3, r3, 0x2220
- eieio
- stwbrx r3, 0, r2
-
-/*
- * configure memory interface (MICRs)
- */
- addis r3, r0, 0x8000 /* ADDR_80 */
- ori r3, r3, 0x0080 /* SMEMADD1 */
- stwbrx r3, 0, r1
- addis r3, r0, 0xFFFF
- ori r3, r3, 0x4000
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_84 */
- ori r3, r3, 0x0084 /* SMEMADD2 */
- stwbrx r3, 0, r1
- addis r3, r0, 0xFFFF
- ori r3, r3, 0xFFFF
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_88 */
- ori r3, r3, 0x0088 /* EXTSMEM1 */
- stwbrx r3, 0, r1
- addis r3, r0, 0x0303
- ori r3, r3, 0x0000
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_8C */
- ori r3, r3, 0x008c /* EXTSMEM2 */
- stwbrx r3, 0, r1
- addis r3, r0, 0x0303
- ori r3, r3, 0x0303
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_90 */
- ori r3, r3, 0x0090 /* EMEMADD1 */
- stwbrx r3, 0, r1
- addis r3, r0, 0xFFFF
- ori r3, r3, 0x7F3F
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_94 */
- ori r3, r3, 0x0094 /* EMEMADD2 */
- stwbrx r3, 0, r1
- addis r3, r0, 0xFFFF
- ori r3, r3, 0xFFFF
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_98 */
- ori r3, r3, 0x0098 /* EXTEMEM1 */
- stwbrx r3, 0, r1
- addis r3, r0, 0x0303
- ori r3, r3, 0x0000
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_9C */
- ori r3, r3, 0x009c /* EXTEMEM2 */
- stwbrx r3, 0, r1
- addis r3, r0, 0x0303
- ori r3, r3, 0x0303
- eieio
- stwbrx r3, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_A0 */
- ori r3, r3, 0x00a0 /* MEMBNKEN */
- stwbrx r3, 0, r1
- addis r3, r0, 0x0000
- ori r3, r3, 0x0003
- eieio
- stwbrx r3, 0, r2
-
-/*
- * must wait at least 100us after HRESET to issue a MEMGO
- */
- lis r0, 1
- mtctr r0
-memStartWait:
- bdnz memStartWait
-
-/*
- * enable RAM Operations through MCCR1 (MEMGO)
- */
- lis r3, 0x8000
- ori r3, r3, 0x00f0
- stwbrx r3, r0, r1
- sync
- lwbrx r3, 0, r2
- lis r0, 0x0008
- or r3, r0, r3
- stwbrx r3, 0, r2
- sync
-
-/*
- * set LEDs first time
- */
- li r3, 0x1
- lis r30, CONFIG_SYS_USR_LED_BASE@h
- stb r3, 2(r30)
- sync
-
-/*
- * init COM1 for polled output
- */
- lis r8, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
- ori r8, r8, CONFIG_SYS_NS16550_COM1@l
- li r9, 0x00
- stb r9, 1(r8) /* int disabled */
- eieio
- li r9, 0x00
- stb r9, 4(r8) /* modem ctrl */
- eieio
- li r9, 0x80
- stb r9, 3(r8) /* link ctrl */
- eieio
- li r9, (CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE)
- stb r9, 0(r8) /* baud rate (LSB)*/
- eieio
- li r9, ((CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
- stb r9, 1(r8) /* baud rate (MSB) */
- eieio
- li r9, 0x07
- stb r9, 3(r8) /* 8 data bits, 2 stop bit, no parity */
- eieio
- li r9, 0x0b
- stb r9, 4(r8) /* enable the receiver and transmitter (modem ctrl) */
- eieio
-waitEmpty:
- lbz r9, 5(r8) /* transmit empty */
- andi. r9, r9, 0x40
- beq waitEmpty
- li r9, 0x47
- stb r9, 3(r8) /* send break, 8 data bits, 2 stop bit, no parity */
- eieio
-
- lis r0, 0x0001
- mtctr r0
-waitCOM1:
- lwz r0, 5(r8) /* load from port for delay */
- bdnz waitCOM1
-
-waitEmpty1:
- lbz r9, 5(r8) /* transmit empty */
- andi. r9, r9, 0x40
- beq waitEmpty1
- li r9, 0x07
- stb r9, 3(r8) /* 8 data bits, 2 stop bit, no parity */
- eieio
-
-/*
- * intro message from message block
- */
- addi r3, r29, (MnewLine-MessageBlock)
- bl Printf
- addi r3, r29, (MinitLogo-MessageBlock)
- bl Printf
-
-/*
- * memory cofiguration using SPD information stored on the SODIMMs
- */
- addi r3, r29, (Mspd01-MessageBlock)
- bl Printf
-
- li r17, 0
-
- li r3, 0x0002 /* get RAM type from spd for bank0/1 */
- bl spdRead
-
- cmpi 0, 0, r3, -1 /* error ? */
- bne noSpdError
-
- addi r3, r29, (Mfail-MessageBlock)
- bl Printf
-
- li r6, 0xe /* error codes in r6 and r7 */
- li r7, 0x0
- b toggleError /* fail - loop forever */
-
-noSpdError:
- mr r15, r3 /* save r3 */
-
- addi r3, r29, (Mok-MessageBlock)
- bl Printf
-
- cmpli 0, 0, r15, 0x0004 /* SDRAM ? */
- beq isSDRAM
-
- addi r3, r29, (MramTyp-MessageBlock)
- bl Printf
-
- li r6, 0xd /* error codes in r6 and r7 */
- li r7, 0x0
- b toggleError /* fail - loop forever */
-
-isSDRAM:
- li r3, 0x0012 /* get supported CAS latencies from byte 18 */
- bl spdRead
- mr r15, r3
- li r3, 0x09
- andi. r0, r15, 0x04
- bne maxCLis3
- li r3, 0x17
-maxCLis3:
- andi. r0, r15, 0x02
- bne CL2
-
- addi r3, r29, (MramTyp-MessageBlock)
- bl Printf
-
- li r6, 0xc /* error codes in r6 and r7 */
- li r7, 0x0
- b toggleError /* fail - loop forever */
-CL2:
- bl spdRead
- cmpli 0, 0, r3, 0xa1 /* cycle time must be 10ns max. */
- blt speedOk
-
- addi r3, r29, (MramTyp-MessageBlock)
- bl Printf
-
- li r6, 0xb /* error codes in r6 and r7 */
- li r7, 0x0
- b toggleError /* fail - loop forever */
-speedOk:
- lis r20, 0x06e8 /* preset MCR1 value */
-
- li r3, 0x0011 /* get number of internal banks from spd for bank0/1 */
- bl spdRead
-
- cmpli 0, 0, r3, 0x02
- beq SD_2B
- cmpli 0, 0, r3, 0x04
- beq SD_4B
-memConfErr:
- addi r3, r29, (MramConfErr-MessageBlock)
- bl Printf
-
- li r6, 0xa /* error codes in r6 and r7 */
- li r7, 0x0
- b toggleError /* fail - loop forever */
-
-SD_2B:
- li r3, 0x0003 /* get number of row bits from spd for bank0/1 */
- bl spdRead
- cmpli 0, 0, r3, 0x0b
- beq row11x2
- cmpli 0, 0, r3, 0x0c
- beq row12x2or13x2
- cmpli 0, 0, r3, 0x0d
- beq row12x2or13x2
- b memConfErr
-SD_4B:
- li r3, 0x0003 /* get number of row bits from spd for bank0/1 */
- bl spdRead
- cmpli 0, 0, r3, 0x0b
- beq row11x4or12x4
- cmpli 0, 0, r3, 0x0c
- beq row11x4or12x4
- cmpli 0, 0, r3, 0x0d
- beq row13x4
- b memConfErr
-row12x2or13x2:
- ori r20, r20, 0x05
- b row11x4or12x4
-row13x4:
- ori r20, r20, 0x0a
- b row11x4or12x4
-row11x2:
- ori r20, r20, 0x0f
-row11x4or12x4:
- /* get the size of bank 0-1 */
-
- li r3, 0x001f /* get bank size from spd for bank0/1 */
- bl spdRead
-
- rlwinm r16, r3, 2, 24, 29 /* calculate size in MByte (128 MB max.) */
-
- li r3, 0x0005 /* get number of banks from spd for bank0/1 */
- bl spdRead
-
- cmpi 0, 0, r3, 2 /* 2 banks ? */
- bne SDRAMnobank1
-
- mr r17, r16
-
-SDRAMnobank1:
- li r3, 0x000c /* get refresh from spd for bank0/1 */
- bl spdRead
- andi. r3, r3, 0x007f /* mask selfrefresh bit */
- li r4, 0x1800 /* refesh cycle 1536 clocks left shifted 2 */
- cmpli 0, 0, r3, 0x0000 /* 15.6 us ? */
- beq writeRefresh
-
- li r4, 0x0c00 /* refesh cycle 768 clocks left shifted 2 */
- cmpli 0, 0, r3, 0x0002 /* 7.8 us ? */
- beq writeRefresh
-
- li r4, 0x3000 /* refesh cycle 3072 clocks left shifted 2 */
- cmpli 0, 0, r3, 0x0003 /* 31.3 us ? */
- beq writeRefresh
-
- li r4, 0x6000 /* refesh cycle 6144 clocks left shifted 2 */
- cmpli 0, 0, r3, 0x0004 /* 62.5 us ? */
- beq writeRefresh
-
- li r4, 0
- ori r4, r4, 0xc000 /* refesh cycle 8224 clocks left shifted 2 */
- cmpli 0, 0, r3, 0x0005 /* 125 us ? */
- beq writeRefresh
-
- b memConfErr
-
-writeRefresh:
- lis r21, 0x0400 /* preset MCCR2 value */
- or r21, r21, r4
-
- /* Overwrite MCCR1 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR1
- stwbrx r3, 0, r1
- eieio
- stwbrx r20, 0, r2
-
- /* Overwrite MCCR2 */
- lis r3, MPC106_REG@h
- ori r3, r3, MPC106_MCCR2
- stwbrx r3, 0, r1
- eieio
- stwbrx r21, 0, r2
-
- /* set the memory boundary registers for bank 0-3 */
- li r20, 0
- lis r23, 0x0303
- lis r24, 0x0303
- subi r21, r16, 1 /* calculate end address bank0 */
- li r22, 1
-
- cmpi 0, 0, r17, 0 /* bank1 present ? */
- beq nobank1
-
- andi. r3, r16, 0x00ff /* calculate start address of bank1 */
- andi. r4, r16, 0x0300
- rlwinm r3, r3, 8, 16, 23
- or r20, r20, r3
- or r23, r23, r4
-
- add r16, r16, r17 /* add to total memory size */
-
- subi r3, r16, 1 /* calculate end address of bank1 */
- andi. r4, r3, 0x0300
- andi. r3, r3, 0x00ff
- rlwinm r3, r3, 8, 16, 23
- or r21, r21, r3
- or r24, r24, r4
-
- ori r22, r22, 2 /* enable bank1 */
- b bankOk
-nobank1:
- ori r23, r23, 0x0300 /* set bank1 start to unused area */
- ori r24, r24, 0x0300 /* set bank1 end to unused area */
-bankOk:
- addi r3, r29, (Mactivate-MessageBlock)
- bl Printf
- mr r3, r16
- bl OutDec
- addi r3, r29, (Mact0123e-MessageBlock)
- bl Printf
-
-/*
- * overwrite MSAR1, MEAR1, EMSAR1, and EMEAR1
- */
- addis r3, r0, 0x8000 /* ADDR_80 */
- ori r3, r3, 0x0080 /* MSAR1 */
- stwbrx r3, 0, r1
- eieio
- stwbrx r20, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_88 */
- ori r3, r3, 0x0088 /* EMSAR1 */
- stwbrx r3, 0, r1
- eieio
- stwbrx r23, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_90 */
- ori r3, r3, 0x0090 /* MEAR1 */
- stwbrx r3, 0, r1
- eieio
- stwbrx r21, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_98 */
- ori r3, r3, 0x0098 /* EMEAR1 */
- stwbrx r3, 0, r1
- eieio
- stwbrx r24, 0, r2
-
- addis r3, r0, 0x8000 /* ADDR_A0 */
- ori r3, r3, 0x00a0 /* MBER */
- stwbrx r3, 0, r1
- eieio
- stwbrx r22, 0, r2
-
-/*
- * delay to let SDRAM go through several initialization/refresh cycles
- */
- lis r3, 3
- mtctr r3
-memStartWait_1:
- bdnz memStartWait_1
- eieio
-
-/*
- * set LEDs end
- */
- li r3, 0xf
- lis r30, CONFIG_SYS_USR_LED_BASE@h
- stb r3, 2(r30)
- sync
-
- mtlr r13
- blr /* EXIT board_asm_init ... */
-
-/*----------------------------------------------------------------------------*/
-/*
- * print a message to COM1 in polling mode (r10=COM1 port, r3=(char*)string)
- */
-
-Printf:
- lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
- ori r10, r10, CONFIG_SYS_NS16550_COM1@l
-WaitChr:
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, WaitChr /* wait till empty */
- lbzx r0, r0, r3 /* get char */
- stb r0, 0(r10) /* write to transmit reg */
- eieio
- addi r3, r3, 1 /* next char */
- lbzx r0, r0, r3 /* get char */
- cmpwi cr1, r0, 0 /* end of string ? */
- bne cr1, WaitChr
- blr
-
-/*
- * print a char to COM1 in polling mode (r10=COM1 port, r3=char)
- */
-OutChr:
- lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
- ori r10, r10, CONFIG_SYS_NS16550_COM1@l
-OutChr1:
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, OutChr1 /* wait till empty */
- stb r3, 0(r10) /* write to transmit reg */
- eieio
- blr
-
-/*
- * print 8/4/2 digits hex value to COM1 in polling mode (r10=COM1 port, r3=val)
- */
-OutHex2:
- li r9, 4 /* shift reg for 2 digits */
- b OHstart
-OutHex4:
- li r9, 12 /* shift reg for 4 digits */
- b OHstart
-OutHex:
- li r9, 28 /* shift reg for 8 digits */
-OHstart:
- lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
- ori r10, r10, CONFIG_SYS_NS16550_COM1@l
-OutDig:
- lbz r0, 0(r29) /* slow down dummy read */
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, OutDig
- sraw r0, r3, r9
- clrlwi r0, r0, 28
- cmpwi cr1, r0, 9
- ble cr1, digIsNum
- addic r0, r0, 55
- b nextDig
-digIsNum:
- addic r0, r0, 48
-nextDig:
- stb r0, 0(r10) /* write to transmit reg */
- eieio
- addic. r9, r9, -4
- bge OutDig
- blr
-
-/*
- * print 3 digits hdec value to COM1 in polling mode
- * (r10=COM1 port, r3=val, r7=x00, r8=x0, r9=x, r0, r6=scratch)
- */
-OutDec:
- li r6, 10
- divwu r0, r3, r6 /* r0 = r3 / 10, r9 = r3 mod 10 */
- mullw r10, r0, r6
- subf r9, r10, r3
- mr r3, r0
- divwu r0, r3, r6 /* r0 = r3 / 10, r8 = r3 mod 10 */
- mullw r10, r0, r6
- subf r8, r10, r3
- mr r3, r0
- divwu r0, r3, r6 /* r0 = r3 / 10, r7 = r3 mod 10 */
- mullw r10, r0, r6
- subf r7, r10, r3
- lis r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
- ori r10, r10, CONFIG_SYS_NS16550_COM1@l
- or. r7, r7, r7
- bne noblank1
- li r3, 0x20
- b OutDec4
-noblank1:
- addi r3, r7, 48 /* convert to ASCII */
-OutDec4:
- lbz r0, 0(r29) /* slow down dummy read */
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, OutDec4
- stb r3, 0(r10) /* x00 to transmit */
- eieio
- or. r7, r7, r8
- beq OutDec5
- addi r3, r8, 48 /* convert to ASCII */
-OutDec5:
- lbz r0, 0(r29) /* slow down dummy read */
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, OutDec5
- stb r3, 0(r10) /* x0 to transmit */
- eieio
- addi r3, r9, 48 /* convert to ASCII */
-OutDec6:
- lbz r0, 0(r29) /* slow down dummy read */
- lbz r0, 5(r10) /* read link status */
- eieio
- andi. r0, r0, 0x40 /* mask transmitter empty bit */
- beq cr0, OutDec6
- stb r3, 0(r10) /* x to transmit */
- eieio
- blr
-
-/*
- * hang endless loop
- */
-toggleError: /* fail type in r6, r7=0xff, toggle LEDs */
- stb r7, 2(r30) /* r7 to LED */
- li r0, 0
- lis r9, 127
- ori r9, r9, 65535
-toggleError1:
- addic r0, r0, 1
- cmpw cr1, r0, r9
- ble cr1, toggleError1
- stb r6, 2(r30) /* r6 to LED */
- li r0, 0
- lis r9, 127
- ori r9, r9, 65535
-toggleError2:
- addic r0, r0, 1
- cmpw cr1, r0, r9
- ble cr1, toggleError2
- b toggleError
-
-/*
- * routines to read from ram spd
- */
-spdWaitIdle:
- lis r0, 0x1 /* timeout for about 100us */
- mtctr r0
-iSpd:
- lbz r10, 12(r14)
- andi. r10, r10, 0x20 /* mask and test MBB */
- beq idle
- bdnz iSpd
- orc. r10, r0, r0 /* return -1 to caller */
-idle:
- bclr 20, 0 /* return to caller */
-
-waitSpd:
- lis r0, 0x10 /* timeout for about 1.5ms */
- mtctr r0
-wSpd:
- lbz r10, 12(r14)
- andi. r10, r10, 0x82
- cmpli 0, 0, r10, 0x82 /* test MCF and MIF set */
- beq wend
- bdnz wSpd
- orc. r10, r0, r0 /* return -1 to caller */
- bclr 20, 0 /* return to caller */
-
-wend:
- li r10, 0
- stb r10, 12(r14) /* clear status */
- bclr 20, 0 /* return to caller */
-
-/*
- * spdread
- * in: r3 adr to read
- * out: r3 val or -1 for error
- * uses r10, assumes that r14 points to I2C controller
- */
-spdRead:
- mfspr r25, 8 /* save link register */
-
- bl spdWaitIdle
- bne spdErr
-
- li r10, 0x80 /* start with MEN */
- stb r10, 8(r14)
- eieio
-
- li r10, 0xb0 /* start as master */
- stb r10, 8(r14)
- eieio
-
- li r10, 0xa0 /* write device 0xA0 */
- stb r10, 16(r14)
- eieio
- bl waitSpd
- bne spdErr
-
- lbz r10, 12(r14) /* test ACK */
- andi. r10, r10, 0x01
- bne gotNoAck
-
- stb r3, 16(r14) /* data address */
- eieio
- bl waitSpd
- bne spdErr
-
-
- li r10, 0xb4 /* switch to read - restart */
- stb r10, 8(r14)
- eieio
-
- li r10, 0xa1 /* read device 0xA0 */
- stb r10, 16(r14)
- eieio
- bl waitSpd
- bne spdErr
-
- li r10, 0xa8 /* no ACK */
- stb r10, 8(r14)
- eieio
-
- lbz r10, 16(r14) /* trigger read next byte */
- eieio
- bl waitSpd
- bne spdErr
-
- li r10, 0x88 /* generate STOP condition */
- stb r10, 8(r14)
- eieio
-
- lbz r3, 16(r14) /* return read byte */
-
- mtspr 8, r25 /* restore link register */
- blr
-
-gotNoAck:
- li r10, 0x80 /* generate STOP condition */
- stb r10, 8(r14)
- eieio
-spdErr:
- orc r3, r0, r0 /* return -1 */
- mtspr 8, r25 /* restore link register */
- blr
-
-get_lnk_reg:
- mflr r3 /* return link reg */
- blr
-
-MessageBlock:
-
-MinitLogo:
- .ascii "\015\012*** ELTEC Elektronik, Mainz ***\015\012"
- .ascii "\015\012Initialising RAM\015\012\000"
-Mspd01:
- .ascii " Reading SPD of SODIMM ...... \000"
-MramTyp:
- .ascii "\015\012\SDRAM with CL=2 at 100 MHz required!\015\012\000"
-MramConfErr:
- .ascii "\015\012\Unsupported SODIMM Configuration!\015\012\000"
-Mactivate:
- .ascii " Activating \000"
-Mact0123e:
- .ascii " MByte.\015\012\000"
-Mok:
- .ascii "OK \015\012\000"
-Mfail:
- .ascii "FAILED \015\012\000"
-MnewLine:
- .ascii "\015\012\000"
- .align 4
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Local network srom writing for first time run
- */
-
-/* includes */
-#include <common.h>
-#include <pci.h>
-#include <net.h>
-#include "srom.h"
-
-extern int eepro100_write_eeprom (struct eth_device *dev,
- int location, int addr_len,
- unsigned short data);
-
-/*----------------------------------------------------------------------------*/
-
-unsigned short eepro100_srom_checksum (unsigned short *sromdata)
-{
- unsigned short sum = 0;
- unsigned int i;
-
- for (i = 0; i < (EE_SIZE - 1); i++) {
- sum += sromdata[i];
- }
- return (EE_CHECKSUM - sum);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int eepro100_srom_store (unsigned short *source)
-{
- int count;
- struct eth_device onboard_dev;
-
- /* get onboard network iobase */
- pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0,
- (unsigned int *) &onboard_dev.iobase);
- onboard_dev.iobase &= ~0xf;
-
- source[63] = eepro100_srom_checksum (source);
-
- for (count = 0; count < EE_SIZE; count++) {
- if (eepro100_write_eeprom ((struct eth_device *) &onboard_dev,
- count, EE_ADDR_BITS,
- SROM_SHORT (source)) == -1) {
- return -1;
- }
- source++;
- }
- return 0;
-}
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef EEPRO100_SROM_CHECK
-
-extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
-
-void eepro100_srom_load (unsigned short *destination)
-{
- int count;
- struct eth_device onboard_dev;
-
-#ifdef DEBUG
- int lr = 0;
-
- printf ("eepro100_srom_download:\n");
-#endif
-
- /* get onboard network iobase */
- pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0,
- &onboard_dev.iobase);
- onboard_dev.iobase &= ~0xf;
-
- memset (destination, 0x65, 128);
-
- for (count = 0; count < 0x40; count++) {
- *destination++ = read_eeprom ((struct eth_device *) &onboard_dev,
- count, EE_ADDR_BITS);
-#ifdef DEBUG
- printf ("%04x ", *(destination - 1));
- if (lr++ == 7) {
- printf ("\n");
- lr = 0;
- }
-#endif
- }
-}
-#endif /* EEPRO100_SROM_CHECK */
-
-/*----------------------------------------------------------------------------*/
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc106.h>
-#include <video_fb.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int checkboard (void)
-{
- puts ("Board: ELTEC PowerPC\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int checkflash (void)
-{
- /* TODO */
- printf ("Test not implemented !\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static unsigned int mpc106_read_cfg_dword (unsigned int reg)
-{
- unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
-
- out32r (MPC106_REG_ADDR, reg_addr);
-
- return (in32r (MPC106_REG_DATA | (reg & 0x3)));
-}
-
-/* ------------------------------------------------------------------------- */
-
-long int dram_size (int board_type)
-{
- /*
- * No actual initialisation to do - done when setting up
- * PICRs MCCRs ME/SARs etc in asm_init.S.
- */
-
- register unsigned long i, msar1, mear1, memSize;
-
-#if defined(CONFIG_SYS_MEMTEST)
- register unsigned long reg;
-
- printf ("Testing DRAM\n");
-
- /* write each mem addr with it's address */
- for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
- *reg = reg;
-
- for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
- if (*reg != reg)
- return -1;
- }
-#endif
-
- /*
- * Since MPC107 memory controller chip has already been set to
- * control all memory, just read and interpret its memory boundery register.
- */
- memSize = 0;
- msar1 = mpc106_read_cfg_dword (MPC106_MSAR1);
- mear1 = mpc106_read_cfg_dword (MPC106_MEAR1);
- i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf;
-
- do {
- if (i & 0x01) /* is bank enabled ? */
- memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
- msar1 >>= 8;
- mear1 >>= 8;
- i >>= 1;
- } while (i);
-
- return (memSize * 0x100000);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- return dram_size (board_type);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * The BAB 911 can be reset by writing bit 0 of the Processor Initialization
- * Register PI in the MPC 107 (at offset 0x41090 of the Embedded Utilities
- * Memory Block).
- */
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- out8 (MPC107_EUMB_PI, 1);
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-
-/*
- * Since the 7xx CPUs don't have an internal watchdog, this function is
- * board specific.
- */
-void watchdog_reset (void)
-{
-}
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-
-void after_reloc (ulong dest_addr)
-{
- /*
- * Jump to the main U-Boot board init code
- */
- board_init_r ((gd_t *)gd, dest_addr);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-extern GraphicDevice smi;
-
-void video_get_info_str (int line_number, char *info)
-{
- /* init video info strings for graphic console */
- switch (line_number) {
- case 1:
- sprintf (info, " MPC7xx V%d.%d at %d / %d MHz",
- (get_pvr () >> 8) & 0xFF, get_pvr () & 0xFF, 400, 100);
- return;
- case 2:
- sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH",
- dram_size (0) / 0x100000, flash_init () / 0x100000);
- return;
- case 3:
- sprintf (info, " %s", smi.modeIdent);
- return;
- }
-
- /* no more info lines */
- *info = 0;
- return;
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * 07-10-2002 Frank Gottschling: added 29F032 flash (ELPPC).
- * fixed monitor protection part
- *
- * 09-18-2001 Andreas Heppel: Reduced the code in here to the usage
- * of AMD's 29F040 and 29F016 flashes, since the BAB7xx does use
- * any other.
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*flash command address offsets*/
-
-#define ADDR0 (0x555)
-#define ADDR1 (0x2AA)
-#define ADDR3 (0x001)
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*----------------------------------------------------------------------------*/
-
-unsigned long flash_init (void)
-{
- unsigned long size1, size2;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* initialise 1st flash */
- size1 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN)
- {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size1, size1<<20);
- }
-
- /* initialise 2nd flash */
- size2 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (flash_info[1].flash_id == FLASH_UNKNOWN)
- {
- printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
- size2, size2<<20);
- }
-
- /* monitor protection ON by default */
- if (size1 == 512*1024)
- {
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM+monitor_flash_len-1,
- &flash_info[0]);
- }
- if (size2 == 512*1024)
- {
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE1_PRELIM,
- FLASH_BASE1_PRELIM+monitor_flash_len-1,
- &flash_info[1]);
- }
- if (size2 == 4*1024*1024)
- {
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
- &flash_info[1]);
- }
-
- return (size1 + size2);
-}
-
-/*----------------------------------------------------------------------------*/
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- flash_init();
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case AMD_ID_F040B:
- printf ("AM29F040B (4 Mbit)\n");
- break;
- case AMD_ID_F016D:
- printf ("AM29F016D (16 Mbit)\n");
- break;
- case AMD_ID_F032B:
- printf ("AM29F032B (32 Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- if (info->size >= (1 << 20)) {
- printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
- } else {
- printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count);
- }
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
-
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " ");
- }
- printf ("\n");
-}
-
-/*----------------------------------------------------------------------------*/
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong vendor, devid;
- ulong base = (ulong)addr;
- volatile unsigned char *caddr = (unsigned char *)addr;
-
-#ifdef DEBUG
- printf("flash_get_size for address 0x%lx: \n", (unsigned long)caddr);
-#endif
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0] = 0xF0; /* reset bank */
- udelay(10);
-
- eieio();
- caddr[0x555] = 0xAA;
- udelay(10);
- caddr[0x2AA] = 0x55;
- udelay(10);
- caddr[0x555] = 0x90;
-
- udelay(10);
-
- vendor = caddr[0];
- devid = caddr[1];
-
-#ifdef DEBUG
- printf("Manufacturer: 0x%lx\n", vendor);
-#endif
-
- vendor &= 0xff;
- devid &= 0xff;
-
- /* We accept only two AMD types */
- switch (vendor) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- switch (devid) {
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id |= AMD_ID_F040B;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_F016D:
- info->flash_id |= AMD_ID_F016D;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_F032B:
- info->flash_id |= AMD_ID_F032B;
- info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
-#ifdef DEBUG
- printf("flash id 0x%lx; sector count 0x%x, size 0x%lx\n", info->flash_id, info->sector_count, info->size);
-#endif
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* sector base address */
- info->start[i] = base + i * (info->size / info->sector_count);
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (volatile unsigned char *)info->start[0];
- caddr[0] = 0xF0; /* reset bank */
- }
-
- return (info->size);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- int rc = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *)(info->start[sect]);
- if (info->flash_id & FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- udelay(30000); /* wait 30 ms */
- }
- else
- addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return rc;
-}
-
-/*----------------------------------------------------------------------------*/
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*----------------------------------------------------------------------------*/
-/* Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
- ulong start;
- int flag;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *)dest) &
- (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
- {
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*----------------------------------------------------------------------------*/
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* includes */
-#include <common.h>
-#include <cli.h>
-#include <linux/ctype.h>
-#include <pci.h>
-#include <net.h>
-#include "srom.h"
-
-/* imports */
-extern int l2_cache_enable (int l2control);
-extern int eepro100_write_eeprom (struct eth_device *dev, int location,
- int addr_len, unsigned short data);
-extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
-
-/*----------------------------------------------------------------------------*/
-/*
- * read/write to nvram is only byte access
- */
-void *nvram_read (void *dest, const long src, size_t count)
-{
- uchar *d = (uchar *) dest;
- uchar *s = (uchar *) (CONFIG_ENV_MAP_ADRS + src);
-
- while (count--)
- *d++ = *s++;
-
- return dest;
-}
-
-void nvram_write (long dest, const void *src, size_t count)
-{
- uchar *d = (uchar *) (CONFIG_ENV_MAP_ADRS + dest);
- uchar *s = (uchar *) src;
-
- while (count--)
- *d++ = *s++;
-}
-
-/*----------------------------------------------------------------------------*/
-/*
- * handle sroms on ELPPC
- * fix ether address
- * set serial console as default
- */
-int misc_init_r (void)
-{
- revinfo eerev;
- u_char *ptr;
- u_int i, l, initSrom, copyNv;
- char buf[256];
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
- };
-
- /* Clock setting for MPC107 i2c */
- mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
-
- /* Reset the EPIC */
- out32r (MPC107_EUMB_GCR, 0xa0000000);
- while (in32r (MPC107_EUMB_GCR) & 0x80000000); /* Wait for reset to complete */
- out32r (MPC107_EUMB_GCR, 0x20000000); /* Put into into mixed mode */
- while (in32r (MPC107_EUMB_IACKR) != 0xff); /* Clear all pending interrupts */
-
- /*
- * Check/Remake revision info
- */
- initSrom = 0;
- copyNv = 0;
-
- /* read out current revision srom contens */
- mpc107_srom_load (0x0000, (u_char *) & eerev, sizeof (revinfo),
- SECOND_DEVICE, FIRST_BLOCK);
-
- /* read out current nvram shadow image */
- nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
-
- if (strcmp (eerev.magic, "ELTEC") != 0) {
- /* srom is not initialized -> create a default revision info */
- for (i = 0, ptr = (u_char *) & eerev; i < sizeof (revinfo);
- i++)
- *ptr++ = 0x00;
- strcpy (eerev.magic, "ELTEC");
- eerev.revrev[0] = 1;
- eerev.revrev[1] = 0;
- eerev.size = 0x00E0;
- eerev.category[0] = 0x01;
-
- /* node id from dead e128 as default */
- eerev.etheraddr[0] = 0x00;
- eerev.etheraddr[1] = 0x00;
- eerev.etheraddr[2] = 0x5B;
- eerev.etheraddr[3] = 0x00;
- eerev.etheraddr[4] = 0x2E;
- eerev.etheraddr[5] = 0x4D;
-
- /* cache config word for ELPPC */
- memset(&eerev.res[0], 0, 4);
-
- initSrom = 1; /* force dialog */
- copyNv = 1; /* copy to nvram */
- }
-
- if ((copyNv == 0)
- && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) !=
- el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) {
- printf ("Invalid revision info copy in nvram !\n");
- printf ("Press key:\n <c> to copy current revision info to nvram.\n");
- printf (" <r> to reenter revision info.\n");
- printf ("=> ");
- if (0 != cli_readline(NULL)) {
- switch ((char) toupper (console_buffer[0])) {
- case 'C':
- copyNv = 1;
- break;
- case 'R':
- copyNv = 1;
- initSrom = 1;
- break;
- }
- }
- }
-
- if (initSrom) {
- memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
- printf ("Enter revision number (0-9): %c ",
- eerev.revision[0][0]);
- if (0 != cli_readline(NULL)) {
- eerev.revision[0][0] =
- (char) toupper (console_buffer[0]);
- memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
- }
-
- printf ("Enter revision character (A-Z): %c ",
- eerev.revision[0][1]);
- if (1 == cli_readline(NULL)) {
- eerev.revision[0][1] =
- (char) toupper (console_buffer[0]);
- }
-
- printf ("Enter board name (V-XXXX-XXXX): %s ",
- (char *) &eerev.board);
- if (11 == cli_readline(NULL)) {
- for (i = 0; i < 11; i++)
- eerev.board[i] =
- (char) toupper (console_buffer[i]);
- eerev.board[11] = '\0';
- }
-
- printf ("Enter serial number: %s ", (char *) &eerev.serial);
- if (6 == cli_readline(NULL)) {
- for (i = 0; i < 6; i++)
- eerev.serial[i] = console_buffer[i];
- eerev.serial[6] = '\0';
- }
-
- printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", eerev.etheraddr[0], eerev.etheraddr[1], eerev.etheraddr[2], eerev.etheraddr[3], eerev.etheraddr[4], eerev.etheraddr[5]);
- if (12 == cli_readline(NULL)) {
- for (i = 0; i < 12; i += 2)
- eerev.etheraddr[i >> 1] =
- (char) (16 *
- hex[toupper
- (console_buffer[i]) -
- '0'] +
- hex[toupper
- (console_buffer[i + 1]) -
- '0']);
- }
-
- l = strlen ((char *) &eerev.text);
- printf ("Add to text section (max 64 chr): %s ",
- (char *) &eerev.text);
- if (0 != cli_readline(NULL)) {
- for (i = l; i < 63; i++)
- eerev.text[i] = console_buffer[i - l];
- eerev.text[63] = '\0';
- }
-
- /* prepare network eeprom */
- memset (buf, 0, 128);
-
- buf[0] = eerev.etheraddr[1];
- buf[1] = eerev.etheraddr[0];
- buf[2] = eerev.etheraddr[3];
- buf[3] = eerev.etheraddr[2];
- buf[4] = eerev.etheraddr[5];
- buf[5] = eerev.etheraddr[4];
-
- buf[20] = 0x48;
- buf[21] = 0xB2;
-
- buf[22] = 0x00;
- buf[23] = 0x04;
-
- buf[24] = 0x14;
- buf[25] = 0x33;
-
- printf ("\nSRom: Writing i82559 info ........ ");
- if (eepro100_srom_store ((unsigned short *) buf) == -1)
- printf ("FAILED\n");
- else
- printf ("OK\n");
-
- /* update CRC */
- eerev.crc =
- el_srom_checksum ((u_char *) eerev.board, eerev.size);
-
- /* write new values */
- printf ("\nSRom: Writing revision info ...... ");
- if (mpc107_srom_store
- ((BLOCK_SIZE - sizeof (revinfo)), (u_char *) & eerev,
- sizeof (revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
- printf ("FAILED\n\n");
- else
- printf ("OK\n\n");
-
- /* write new values as shadow image to nvram */
- nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
- CONFIG_SYS_SROM_SIZE);
-
- }
-
- /*if (initSrom) */
- /* copy current values as shadow image to nvram */
- if (initSrom == 0 && copyNv == 1)
- nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
- CONFIG_SYS_SROM_SIZE);
-
- /* update environment */
- sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
- eerev.etheraddr[0], eerev.etheraddr[1],
- eerev.etheraddr[2], eerev.etheraddr[3],
- eerev.etheraddr[4], eerev.etheraddr[5]);
- setenv ("ethaddr", buf);
-
- /* print actual board identification */
- printf ("Ident: %s Ser %s Rev %c%c\n",
- eerev.board, (char *) &eerev.serial,
- eerev.revision[0][0], eerev.revision[0][1]);
-
- return (0);
-}
-
-/*----------------------------------------------------------------------------*/
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* includes */
-#include <common.h>
-#include "srom.h"
-
-/* locals */
-static unsigned long mpc107_eumb_addr = 0;
-
-/*----------------------------------------------------------------------------*/
-
-/*
- * calculate checksum for ELTEC revision srom
- */
-unsigned long el_srom_checksum (ptr, size)
-register unsigned char *ptr;
-unsigned long size;
-{
- u_long f, accu = 0;
- u_int i;
- u_char byte;
-
- for (; size; size--)
- {
- byte = *ptr++;
- for (i = 8; i; i--)
- {
- f = ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0;
- accu >>= 1; accu ^= f;
- byte >>= 1;
- }
- }
- return(accu);
-}
-
-/*----------------------------------------------------------------------------*/
-
-static int mpc107_i2c_wait ( unsigned long timeout )
-{
- unsigned long x;
-
- while (((x = in32r(MPC107_I2CSR)) & 0x82) != 0x82)
- {
- if (!timeout--)
- return -1;
- }
-
- if (x & 0x10)
- {
- return -1;
- }
- out32r(MPC107_I2CSR, 0);
-
- return 0;
-}
-
-/*----------------------------------------------------------------------------*/
-
-static int mpc107_i2c_wait_idle ( unsigned long timeout )
-{
- while (in32r(MPC107_I2CSR) & 0x20)
- {
- if (!timeout--)
- return -1;
- }
- return 0;
-}
-
-
-/*----------------------------------------------------------------------------*/
-
-int mpc107_i2c_read_byte (
- unsigned char device,
- unsigned char block,
- unsigned char offset )
-{
- unsigned long timeout = MPC107_I2C_TIMEOUT;
- int data;
-
- if (!mpc107_eumb_addr)
- return -6;
-
- mpc107_i2c_wait_idle (timeout);
-
- /* Start with MEN */
- out32r(MPC107_I2CCR, 0x80);
-
- /* Start as master */
- out32r(MPC107_I2CCR, 0xB0);
- out32r(MPC107_I2CDR, (0xA0 | device | block));
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_read Error 1\n");
- return -2;
- }
-
- if (in32r(MPC107_I2CSR)&0x1)
- {
- /* Generate STOP condition; device busy or not existing */
- out32r(MPC107_I2CCR, 0x80);
- return -1;
- }
-
- /* Data address */
- out32r(MPC107_I2CDR, offset);
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_read Error 2\n");
- return -3;
- }
-
- /* Switch to read - restart */
- out32r(MPC107_I2CCR, 0xB4);
- out32r(MPC107_I2CDR, (0xA1 | device | block));
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_read Error 3\n");
- return -4;
- }
-
- out32r(MPC107_I2CCR, 0xA8); /* no ACK */
- in32r(MPC107_I2CDR);
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_read Error 4\n");
- return -5;
- }
- /* Generate STOP condition */
- out32r(MPC107_I2CCR, 0x88);
-
- /* read */
- data = in32r(MPC107_I2CDR);
-
- return (data);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int mpc107_i2c_write_byte (
- unsigned char device,
- unsigned char block,
- unsigned char offset,
- unsigned char val )
-{
-
- unsigned long timeout = MPC107_I2C_TIMEOUT;
-
- if (!mpc107_eumb_addr)
- return -6;
-
- mpc107_i2c_wait_idle(timeout);
-
- /* Start with MEN */
- out32r(MPC107_I2CCR, 0x80);
-
- /* Start as master */
- out32r(MPC107_I2CCR, 0xB0);
- out32r(MPC107_I2CDR, (0xA0 | device | block));
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_write Error 1\n");
- return -1;
- }
-
- /* Data address */
- out32r(MPC107_I2CDR, offset);
-
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_write Error 2\n");
- return -1;
- }
-
- /* Write */
- out32r(MPC107_I2CDR, val);
- if (mpc107_i2c_wait(timeout) < 0)
- {
- printf("mpc107_i2c_write Error 3\n");
- return -1;
- }
-
- /* Generate Stop Condition */
- out32r(MPC107_I2CCR, 0x80);
-
- /* Return ACK or no ACK */
- return (in32r(MPC107_I2CSR) & 0x01);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int mpc107_srom_load (
- unsigned char addr,
- unsigned char *pBuf,
- int cnt,
- unsigned char device,
- unsigned char block )
-{
- register int i;
- int val;
- int timeout;
-
- for (i = 0; i < cnt; i++)
- {
- timeout=100;
- do
- {
- val = mpc107_i2c_read_byte (device, block, addr);
- if (val < -1)
- {
- printf("i2c_read_error %d at dev %x block %x addr %x\n",
- val, device, block, addr);
- return -1;
- }
- else if (timeout==0)
- {
- printf ("i2c_read_error: timeout at dev %x block %x addr %x\n",
- device, block, addr);
- return -1;
- }
- timeout--;
- } while (val == -1); /* if no ack: try again! */
-
- *pBuf++ = (unsigned char)val;
- addr++;
-
- if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */
- {
- if (block == FIRST_BLOCK)
- block = SECOND_BLOCK;
- else
- {
- printf ("ic2_read_error: read beyond 2. block !\n");
- return -1;
- }
- }
- }
- udelay(100000);
- return (cnt);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int mpc107_srom_store (
- unsigned char addr,
- unsigned char *pBuf,
- int cnt,
- unsigned char device,
- unsigned char block )
-{
- register int i;
-
- for (i = 0; i < cnt; i++)
- {
- while (mpc107_i2c_write_byte (device,block,addr,*pBuf) == 1);
- addr++;
- pBuf++;
-
- if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */
- {
- if (block == FIRST_BLOCK)
- block = SECOND_BLOCK;
- else
- {
- printf ("ic2_write_error: write beyond 2. block !\n");
- return -1;
- }
- }
- }
- udelay(100000);
- return(cnt);
-}
-
-/*----------------------------------------------------------------------------*/
-
-int mpc107_i2c_init ( unsigned long eumb_addr, unsigned long divider )
-{
- unsigned long x;
-
- if (eumb_addr)
- mpc107_eumb_addr = eumb_addr;
- else
- return -1;
-
- /* Set I2C clock */
- x = in32r(MPC107_I2CFDR) & 0xffffff00;
- out32r(MPC107_I2CFDR, (x | divider));
-
- /* Clear arbitration */
- out32r(MPC107_I2CSR, 0);
-
- return mpc107_eumb_addr;
-}
-
-/*----------------------------------------------------------------------------*/
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * PCI initialisation for the MPC10x.
- */
-
-#include <common.h>
-#include <pci.h>
-#include <mpc106.h>
-
-#ifdef CONFIG_PCI
-
-struct pci_controller local_hose;
-
-void pci_init_board(void)
-{
- struct pci_controller* hose = (struct pci_controller *)&local_hose;
- u16 reg16;
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI_MEMORY_BUS,
- CONFIG_SYS_PCI_MEMORY_PHYS,
- CONFIG_SYS_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI_MEM_BUS,
- CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
- CONFIG_SYS_ISA_MEM_BUS,
- CONFIG_SYS_ISA_MEM_PHYS,
- CONFIG_SYS_ISA_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + 3,
- CONFIG_SYS_PCI_IO_BUS,
- CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
- CONFIG_SYS_ISA_IO_BUS,
- CONFIG_SYS_ISA_IO_PHYS,
- CONFIG_SYS_ISA_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 5;
-
- pci_setup_indirect(hose,
- MPC106_REG_ADDR,
- MPC106_REG_DATA);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-
- /* Initialises the MPC10x PCI Configuration regs. */
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
-
- /* Clear non-reserved bits in status register */
- pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
-}
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* common srom defs */
-#define FIRST_DEVICE 0x00
-#define SECOND_DEVICE 0x04
-#define FIRST_BLOCK 0x00
-#define SECOND_BLOCK 0x02
-#define BLOCK_SIZE 0x100
-#define ERROR (-1)
-
-#define CLK2P0TO1_1MB_PB_0P5DH 0x79000100
-#define CLK2P5TO1_1MB_PB_0P5DH 0x7B000100
-
-#define CPU_TYPE_740 0x08
-#define CPU_TYPE_750 0x08
-#define CPU_TYPE ((get_pvr()>>16)&0xffff)
-
-#define ABS(x) ((x<0)?-x:x)
-#define SROM_SHORT(pX) (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
-
-/* bab7xx ELTEC srom */
-#define I2C_BUS_DAT (CONFIG_SYS_ISA_IO + 0x220)
-#define I2C_BUS_DIR (CONFIG_SYS_ISA_IO + 0x221)
-
-/* srom at mpc107 */
-#define MPC107_I2CADDR (mpc107_eumb_addr + 0x3000) /* address */
-#define MPC107_I2CFDR (mpc107_eumb_addr + 0x3004) /* freq divider */
-#define MPC107_I2CCR (mpc107_eumb_addr + 0x3008) /* control */
-#define MPC107_I2CSR (mpc107_eumb_addr + 0x300c) /* status */
-#define MPC107_I2CDR (mpc107_eumb_addr + 0x3010) /* data */
-#define MPC107_I2C_TIMEOUT 10000000
-
-/* i82559 */
-#define EE_ADDR_BITS 6
-#define EE_SIZE 0x40 /* 0x40 words */
-#define EE_CHECKSUM 0xBABA
-
-/* dc21143 */
-#define DEC_SROM_SIZE 128
-
-
-/*
- * structure of revision srom
- */
-typedef struct {
- char magic[8]; /* 000 - Magic number */
- char revrev[2]; /* 008 - Revision of structure */
- unsigned short size; /* 00A - Size of CRC area */
- unsigned long crc; /* 00C - CRC */
- char board[16]; /* 010 - Board Revision information */
- char option[4][16]; /* 020 - Option Revision information */
- char serial[8]; /* 060 - Board serial number */
- char etheraddr[6]; /* 068 - Ethernet node addresse */
- char reserved[2]; /* 06E - Reserved */
- char revision[7][2]; /* 070 - Revision codes */
- char category[2]; /* 07E - Category codes */
- char text[64]; /* 080 - Text field */
- char res[64]; /* 0C0 - Reserved */
-} revinfo;
-
-unsigned long el_srom_checksum (unsigned char *ptr, unsigned long size);
-int el_srom_load (unsigned char addr, unsigned char *buf, int cnt,
- unsigned char device, unsigned char block);
-int el_srom_store (unsigned char addr, unsigned char *buf, int cnt,
- unsigned char device, unsigned char block);
-
-int mpc107_i2c_init (unsigned long eumb_addr, unsigned long divider);
-int mpc107_i2c_read_byte (unsigned char device, unsigned char block, unsigned char offset);
-int mpc107_i2c_write_byte (unsigned char device, unsigned char block,
- unsigned char offset, unsigned char val);
-int mpc107_srom_load (unsigned char addr, unsigned char *pBuf, int cnt,
- unsigned char device, unsigned char block);
-int mpc107_srom_store (unsigned char addr, unsigned char *pBuf, int cnt,
- unsigned char device, unsigned char block);
-
-int dc_srom_load (unsigned short *dest);
-int dc_srom_store (unsigned short *src);
-
-unsigned short eepro100_srom_checksum (unsigned short *sromdata);
-void eepro100_srom_load (unsigned short *destination);
-int eepro100_srom_store (unsigned short *source);
+++ /dev/null
-#ifndef __64260_H__
-#define __64260_H__
-
-/* CPU Configuration bits */
-#define CPU_CONF_ADDR_MISS_EN (1 << 8)
-#define CPU_CONF_AACK_DELAY (1 << 11)
-#define CPU_CONF_ENDIANESS (1 << 12)
-#define CPU_CONF_PIPELINE (1 << 13)
-#define CPU_CONF_TA_DELAY (1 << 15)
-#define CPU_CONF_RD_OOO (1 << 16)
-#define CPU_CONF_STOP_RETRY (1 << 17)
-#define CPU_CONF_MULTI_DECODE (1 << 18)
-#define CPU_CONF_DP_VALID (1 << 19)
-#define CPU_CONF_PERR_PROP (1 << 22)
-#define CPU_CONF_FAST_CLK (1 << 23)
-#define CPU_CONF_AACK_DELAY_2 (1 << 25)
-#define CPU_CONF_AP_VALID (1 << 26)
-#define CPU_CONF_REMAP_WR_DIS (1 << 27)
-#define CPU_CONF_CONF_SB_DIS (1 << 28)
-#define CPU_CONF_IO_SB_DIS (1 << 29)
-#define CPU_CONF_CLK_SYNC (1 << 30)
-
-/* CPU Master Control bits */
-#define CPU_MAST_CTL_ARB_EN (1 << 8)
-#define CPU_MAST_CTL_MASK_BR_1 (1 << 9)
-#define CPU_MAST_CTL_M_WR_TRIG (1 << 10)
-#define CPU_MAST_CTL_M_RD_TRIG (1 << 11)
-#define CPU_MAST_CTL_CLEAN_BLK (1 << 12)
-#define CPU_MAST_CTL_FLUSH_BLK (1 << 13)
-
-#endif /* __64260_H__ */
+++ /dev/null
-if TARGET_P3G4
-
-config SYS_BOARD
- default "evb64260"
-
-config SYS_CONFIG_NAME
- default "P3G4"
-
-endif
-
-if TARGET_ZUMA
-
-config SYS_BOARD
- default "evb64260"
-
-config SYS_CONFIG_NAME
- default "ZUMA"
-
-endif
+++ /dev/null
-EVB64260 BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/evb64260/
-F: include/configs/P3G4.h
-F: configs/P3G4_defconfig
-
-ZUMA BOARD
-#M: Nye Liu <nyet@zumanetworks.com>
-S: Orphan (since 2014-04)
-F: include/configs/ZUMA.h
-F: configs/ZUMA_defconfig
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = misc.o
-obj-y += evb64260.o flash.o serial.o memory.o pci.o \
- eth.o eth_addrtbl.o mpsc.o i2c.o \
- sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o
+++ /dev/null
-This file contains status information for the port of U-Boot to the
-Galileo Evaluation Board.
-
-Author: Josh Huber <huber@mclx.com>
- Mission Critical Linux, Inc.
-
-The support for the Galileo Evaluation board is fairly minimal now.
-It's sufficient to boot Linux, but doesn't provide too much more than
-what's required to do this.
-
-Both DUART channels are supported (to use the second one, you have to
-modify the board -- see the schematics for where to solder on the
-devices module). The ethernet ports are supported, and the MPSC is
-supported as a console driver. (keep in mind that the kernel has no
-support for this yet)
-
-There are still occaisonal lockups with the MPSC console driver due to
-(we think!) overrun problems. If you're looking for something stable
-to use for Linux development, consider sticking with the DUART console
-for now.
-
-Automatic memory sizing mostly works. We've had problems with some
-combinations of memory. Please send us email if you're having trouble
-with respect to the memory detection.
-
-Right now, only the 512k boot flash is supported. Support for the
-16MB flash on the devices module is forthcoming. Right now the flash
-is stored at the 256k boundry in flash, wasting a whole sector (64k!)
-for environment data. This isn't really a big deal since we're not
-using the 512k for anything else. (Just U-Boot and the environment)
-
-Finally, here is a sample output session:
-
-U-Boot 1.0.0-pre1 (Jun 6 2001 - 12:45:11)
-
-Initializing...
- CPU: MPC7400 (altivec enabled) v2.9
- Board: EVB64260
- DRAM: 256 MB
- FLASH: 512 kB
- In: serial
- Out: serial
- Err: serial
-
-=>
-
-The default configuration should be correct for the evaluation board,
-as it's shipped from Galileo. Keep in mind that the default baudrate
-is set to 38400, 8N1.
-
-Good luck, and make sure to send any bugreports to us (or the
-u-boot-users list).
-
-Josh
+++ /dev/null
-The EVB-64260-750CX is quite similar to the EVB-64260-BP already
-supported except the following differences:
-* It has an IBM-750CXe soldiered on board instead of the slot-1 in the
- BP.
-* It has a single PCI male connector instead of the 4 PCI female
- connectors on the BP. It also gets power trough the PCI connector.
-* It has only a single DIMM slot instead of the 2 slots in the BP.
+++ /dev/null
-(cpu/mpc7xxx/start.S)
-
-start:
- b boot_cold
-
-start_warm:
- b boot_warm
-
-
-boot_cold:
-boot_warm:
- clear bats
- init l2 (if enabled)
- init altivec (if enabled)
- invalidate l2 (if enabled)
- setup bats (from defines in config_EVB)
- enable_addr_trans: (if MMU enabled)
- enable MSR_IR and MSR_DR
- jump to in_flash
-
-in_flash:
- enable l1 dcache
- gal_low_init: (board/evb64260/sdram_init.S)
- config SDRAM (CFG, TIMING, DECODE)
- init scratch regs (810 + 814)
-
- detect DIMM0 (bank 0 only)
- config SDRAM_PARA0 to 256/512Mbit
- bl sdram_op_mode
- detect bank0 width
- write scratch reg 810
- config SDRAM_PARA0 with results
- config SDRAM_PARA1 with results
-
- detect DIMM1 (bank 2 only)
- config SDRAM_PARA2 to 256/512Mbit
- detect bank2 width
- write scratch reg 814
- config SDRAM_PARA2 with results
- config SDRAM_PARA3 with results
-
- setup device bus timings/width
- setup boot device timings/width
-
- setup CPU_CONF (0x0)
- setup cpu master control register 0x160
- setup PCI0 TIMEOUT
- setup PCI1 TIMEOUT
- setup PCI0 BAR
- setup PCI1 BAR
-
- setup MPP control 0-3
- setup GPP level control
- setup Serial ports multiplex
-
- setup stack pointer (r1)
- setup GOT
- call cpu_init_f
- debug leds
- board_init_f: (common/board.c)
- board_early_init_f:
- remap gt regs?
- map PCI mem/io
- map device space
- clear out interrupts
- init_timebase
- env_init
- serial_init
- console_init_f
- display_options
- initdram: (board/evb64260/evb64260.c)
- detect memory
- for each bank:
- dram_size()
- setup PCI slave memory mappings
- setup SCS
- setup monitor
- alloc board info struct
- init bd struct
- relocate_code: (cpu/mpc7xxx/start.S)
- copy,got,clearbss
- board_init_r(bd, dest_addr) (common/board.c)
- setup bd function pointers
- trap_init
- flash_init: (board/evb64260/flash.c)
- setup bd flash info
- cpu_init_r: (cpu/mpc7xxx/cpu_init.c)
- nothing
- mem_malloc_init
- malloc_bin_reloc
- spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
- env_relocated
- misc_init_r(bd): (board/evb64260/evb64260.c)
- mpsc_init2
+++ /dev/null
-/**************************************************************************
-Etherboot - BOOTP/TFTP Bootstrap Program
-Skeleton NIC driver for Etherboot
-***************************************************************************/
-
-/*
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file is a modified version from the Galileo polled mode
- * network driver for the ethernet contained within the GT64260
- * chip. It has been modified to fit into the U-Boot framework, from
- * the original (etherboot) setup. Also, additional cleanup and features
- * were added.
- *
- * - Josh Huber <huber@mclx.com>
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <galileo/gt64260R.h>
-#include <galileo/core.h>
-#include <asm/cache.h>
-#include <miiphy.h>
-#include <net.h>
-#include <netdev.h>
-
-#include "eth.h"
-#include "eth_addrtbl.h"
-
-#if defined(CONFIG_CMD_NET)
-
-#define GT6426x_ETH_BUF_SIZE 1536
-
-/* if you like verbose output, turn this on! */
-#undef DEBUG
-
-/* Restart autoneg if we detect link is up on phy init. */
-
-/*
- * The GT doc's say that after Rst is deasserted, and the PHY
- * reports autoneg complete, it runs through its autoneg
- * procedures. This doesn't seem to be the case for MII
- * PHY's. To work around this check for link up && autoneg
- * complete when initilizing the port. If they are both set,
- * then restart PHY autoneg. Of course, it may be something
- * completly different.
- */
-#ifdef CONFIG_ETHER_PORT_MII
-# define RESTART_AUTONEG
-#endif
-
-/* do this if you dont want to use snooping */
-#define USE_SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef USE_SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-/* bummer - w/o flush, nothing works, even with snooping - FIXME */
-/* #define FLUSH_DCACHE(a,b) */
-#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-struct eth_dev_s {
- eth0_tx_desc_single *eth_tx_desc;
- eth0_rx_desc_single *eth_rx_desc;
- char *eth_tx_buffer;
- char *eth_rx_buffer[NR];
- int tdn, rdn;
- int dev;
- unsigned int reg_base;
-};
-
-
-#ifdef CONFIG_INTEL_LXT97X
-/* for intel LXT972 */
-static const char ether_port_phy_addr[3]={0,1,2};
-#else
-static const char ether_port_phy_addr[3]={4,5,6};
-#endif
-
-/* MII PHY access routines are common for all i/f, use gal_ent0 */
-#define GT6426x_MII_DEVNAME "gal_enet0"
-
-int gt6426x_miiphy_read(const char *devname, unsigned char phy,
- unsigned char reg, unsigned short *val);
-
-static inline unsigned short
-miiphy_read_ret(unsigned short phy, unsigned short reg)
-{
- unsigned short val;
- gt6426x_miiphy_read(GT6426x_MII_DEVNAME,phy,reg,&val);
- return val;
-}
-
-
-/**************************************************************************
-RESET - Reset adapter
-***************************************************************************/
-void
-gt6426x_eth_reset(void *v)
-{
- /* we should do something here...
- struct eth_device *wp = (struct eth_device *)v;
- struct eth_dev_s *p = wp->priv;
- */
-
- printf ("RESET\n");
- /* put the card in its initial state */
-}
-
-static void gt6426x_handle_SMI(struct eth_dev_s *p, unsigned int icr)
-{
-#ifdef DEBUG
- printf("SMI interrupt: ");
-
- if(icr&0x20000000) {
- printf("SMI done\n");
- }
-#endif
-
- if(icr&0x10000000) {
-#ifdef DEBUG
- unsigned int psr;
-
- psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + p->reg_base);
- printf("PHY state change:\n"
- " GT:%s:%s:%s:%s\n",
- psr & 1 ? "100" : " 10",
- psr & 8 ? " Link" : "nLink",
- psr & 2 ? "FD" : "HD",
- psr & 4 ? " FC" : "nFC");
-
-#ifdef CONFIG_INTEL_LXT97X /* non-standard mii reg (intel lxt972a) */
- {
- unsigned short mii_11;
- mii_11 = miiphy_read_ret(ether_port_phy_addr[p->dev], 0x11);
-
- printf(" mii:%s:%s:%s:%s %s:%s %s\n",
- mii_11 & (1 << 14) ? "100" : " 10",
- mii_11 & (1 << 10) ? " Link" : "nLink",
- mii_11 & (1 << 9) ? "FD" : "HD",
- mii_11 & (1 << 4) ? " FC" : "nFC",
-
- mii_11 & (1 << 7) ? "ANc" : "ANnc",
- mii_11 & (1 << 8) ? "AN" : "Manual",
- ""
- );
- }
-#endif /* CONFIG_INTEL_LXT97X */
-#endif /* DEBUG */
- }
-}
-
-static int
-gt6426x_eth_receive(struct eth_dev_s *p,unsigned int icr)
-{
- int eth_len=0;
- char *eth_data;
-
- eth0_rx_desc_single *rx = &p->eth_rx_desc[(p->rdn)];
-
- INVALIDATE_DCACHE((unsigned int)rx,(unsigned int)(rx+1));
-
- if (rx->command_status & 0x80000000) {
- return 0; /* No packet received */
- }
-
- eth_len = (unsigned int)
- (rx->buff_size_byte_count) & 0x0000ffff;
- eth_data = (char *) p->eth_rx_buffer[p->rdn];
-
-#ifdef DEBUG
- if (eth_len) {
- printf ("%s: Recived %d byte Packet @ 0x%p\n",
- __FUNCTION__, eth_len, eth_data);
- }
-#endif
- /*
- * packet is now in:
- * eth0_rx_buffer[RDN_ETH0];
- */
-
- /* let the upper layer handle the packet */
- NetReceive ((uchar *)eth_data, eth_len);
-
- rx->buff_size_byte_count = GT6426x_ETH_BUF_SIZE<<16;
-
-
- /* GT96100 Owner */
- rx->command_status = 0x80000000;
-
- FLUSH_DCACHE((unsigned int)rx,(unsigned int)(rx+1));
-
- p->rdn ++;
- if (p->rdn == NR) {p->rdn = 0;}
-
- sync();
-
- /* Start Rx*/
- GT_REG_WRITE (ETHERNET0_SDMA_COMMAND_REGISTER + p->reg_base, 0x00000080);
-
-#ifdef DEBUG
- {
- int i;
- for (i=0;i<12;i++) {
- printf(" %02x", eth_data[i]);
- }
- }
- printf(": %d bytes\n", eth_len);
-#endif
- INVALIDATE_DCACHE((unsigned int)eth_data,
- (unsigned int)eth_data+eth_len);
- return eth_len;
-}
-
-/**************************************************************************
-POLL - look for an rx frame, handle other conditions
-***************************************************************************/
-int
-gt6426x_eth_poll(void *v)
-{
- struct eth_device *wp = (struct eth_device *)v;
- struct eth_dev_s *p = wp->priv;
- unsigned int icr=GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER + p->reg_base);
-
- if(icr) {
- GT_REG_WRITE(ETHERNET0_INTERRUPT_CAUSE_REGISTER +p->reg_base, 0);
-#ifdef DEBUG
- printf("poll got ICR %08x\n", icr);
-#endif
- /* SMI done or PHY state change*/
- if(icr&0x30000000) gt6426x_handle_SMI(p, icr);
- }
- /* always process. We aren't using RX interrupts */
- return gt6426x_eth_receive(p, icr);
-}
-
-/**************************************************************************
-TRANSMIT - Transmit a frame
-***************************************************************************/
-int gt6426x_eth_transmit(void *v, char *p, unsigned int s)
-{
- struct eth_device *wp = (struct eth_device *)v;
- struct eth_dev_s *dev = (struct eth_dev_s *)wp->priv;
-#ifdef DEBUG
- unsigned int old_command_stat,old_psr;
-#endif
- eth0_tx_desc_single *tx = &dev->eth_tx_desc[dev->tdn];
-
- /* wait for tx to be ready */
- INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1));
- while (tx->command_status & 0x80000000) {
- int i;
- for(i=0;i<1000;i++);
- INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1));
- }
-
- GT_REG_WRITE (ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 + dev->reg_base,
- (unsigned int)tx);
-
-#ifdef DEBUG
- printf("copying to tx_buffer [%p], length %x, desc = %p\n",
- dev->eth_tx_buffer, s, dev->eth_tx_desc);
-#endif
- memcpy(dev->eth_tx_buffer, (char *) p, s);
-
- tx->buff_pointer = (uchar *)dev->eth_tx_buffer;
- tx->bytecount_reserved = ((__u16)s) << 16;
-
- /* 31 - own
- * 22 - gencrc
- * 18:16 - pad, last, first */
- tx->command_status = (1<<31) | (1<<22) | (7<<16);
-#if 0
- /* FEr #18 */
- tx->next_desc = NULL;
-#else
- tx->next_desc =
- (struct eth0_tx_desc_struct *)
- &dev->eth_tx_desc[(dev->tdn+1)%NT].bytecount_reserved;
-
- /* cpu owned */
- dev->eth_tx_desc[(dev->tdn+1)%NT].command_status = (7<<16); /* pad, last, first */
-#endif
-
-#ifdef DEBUG
- old_command_stat=tx->command_status,
- old_psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + dev->reg_base);
-#endif
-
- FLUSH_DCACHE((unsigned int)tx,
- (unsigned int)&dev->eth_tx_desc[(dev->tdn+2)%NT]);
-
- FLUSH_DCACHE((unsigned int)dev->eth_tx_buffer,(unsigned int)dev->eth_tx_buffer+s);
-
- GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + dev->reg_base, 0x01000000);
-
-#ifdef DEBUG
- {
- unsigned int command_stat=0;
- printf("cmd_stat: %08x PSR: %08x\n", old_command_stat, old_psr);
- /* wait for tx to be ready */
- do {
- unsigned int psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + dev->reg_base);
- command_stat=tx->command_status;
- if(command_stat!=old_command_stat || psr !=old_psr) {
- printf("cmd_stat: %08x PSR: %08x\n", command_stat, psr);
- old_command_stat = command_stat;
- old_psr = psr;
- }
- /* gt6426x_eth0_poll(); */
- } while (command_stat & 0x80000000);
-
- printf("sent %d byte frame\n", s);
-
- if((command_stat & (3<<15)) == 3) {
- printf("frame had error (stat=%08x)\n", command_stat);
- }
- }
-#endif
- return 0;
-}
-
-/**************************************************************************
-DISABLE - Turn off ethernet interface
-***************************************************************************/
-void
-gt6426x_eth_disable(void *v)
-{
- struct eth_device *wp = (struct eth_device *)v;
- struct eth_dev_s *p = (struct eth_dev_s *)wp->priv;
-
- GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + p->reg_base, 0x80008000);
-}
-
-/**************************************************************************
-MII utilities - write: write to an MII register via SMI
-***************************************************************************/
-int
-gt6426x_miiphy_write(const char *devname, unsigned char phy,
- unsigned char reg, unsigned short data)
-{
- unsigned int temp= (reg<<21) | (phy<<16) | data;
-
- while(GTREGREAD(ETHERNET_SMI_REGISTER) & (1<<28)); /* wait for !Busy */
-
- GT_REG_WRITE(ETHERNET_SMI_REGISTER, temp);
- return 0;
-}
-
-/**************************************************************************
-MII utilities - read: read from an MII register via SMI
-***************************************************************************/
-int
-gt6426x_miiphy_read(const char *devname, unsigned char phy,
- unsigned char reg, unsigned short *val)
-{
- unsigned int temp= (reg<<21) | (phy<<16) | 1<<26;
-
- while(GTREGREAD(ETHERNET_SMI_REGISTER) & (1<<28)); /* wait for !Busy */
-
- GT_REG_WRITE(ETHERNET_SMI_REGISTER, temp);
-
- while(1) {
- temp=GTREGREAD(ETHERNET_SMI_REGISTER);
- if(temp & (1<<27)) break; /* wait for ReadValid */
- }
- *val = temp & 0xffff;
-
- return 0;
-}
-
-#ifdef DEBUG
-/**************************************************************************
-MII utilities - dump mii registers
-***************************************************************************/
-static void
-gt6426x_dump_mii(bd_t *bis, unsigned short phy)
-{
- printf("mii reg 0 - 3: %04x %04x %04x %04x\n",
- miiphy_read_ret(phy, 0x0),
- miiphy_read_ret(phy, 0x1),
- miiphy_read_ret(phy, 0x2),
- miiphy_read_ret(phy, 0x3)
- );
- printf(" 4 - 7: %04x %04x %04x %04x\n",
- miiphy_read_ret(phy, 0x4),
- miiphy_read_ret(phy, 0x5),
- miiphy_read_ret(phy, 0x6),
- miiphy_read_ret(phy, 0x7)
- );
- printf(" 8: %04x\n",
- miiphy_read_ret(phy, 0x8)
- );
- printf(" 16-19: %04x %04x %04x %04x\n",
- miiphy_read_ret(phy, 0x10),
- miiphy_read_ret(phy, 0x11),
- miiphy_read_ret(phy, 0x12),
- miiphy_read_ret(phy, 0x13)
- );
- printf(" 20,30: %04x %04x\n",
- miiphy_read_ret(phy, 20),
- miiphy_read_ret(phy, 30)
- );
-}
-#endif
-
-#ifdef RESTART_AUTONEG
-
-/* If link is up && autoneg compleate, and if
- * GT and PHY disagree about link capabilitys,
- * restart autoneg - something screwy with FD/HD
- * unless we do this. */
-static void
-check_phy_state(struct eth_dev_s *p)
-{
- int bmsr = miiphy_read_ret(ether_port_phy_addr[p->dev], MII_BMSR);
- int psr = GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + p->reg_base);
-
- if ((psr & 1<<3) && (bmsr & BMSR_LSTATUS)) {
- int nego = miiphy_read_ret(ether_port_phy_addr[p->dev], MII_ADVERTISE) &
- miiphy_read_ret(ether_port_phy_addr[p->dev], MII_LPA);
- int want;
-
- if (nego & LPA_100FULL) {
- want = 0x3;
- printf("MII: 100Base-TX, Full Duplex\n");
- } else if (nego & LPA_100HALF) {
- want = 0x1;
- printf("MII: 100Base-TX, Half Duplex\n");
- } else if (nego & LPA_10FULL) {
- want = 0x2;
- printf("MII: 10Base-T, Full Duplex\n");
- } else if (nego & LPA_10HALF) {
- want = 0x0;
- printf("MII: 10Base-T, Half Duplex\n");
- } else {
- printf("MII: Unknown link-foo! %x\n", nego);
- return;
- }
-
- if ((psr & 0x3) != want) {
- printf("MII: GT thinks %x, PHY thinks %x, restarting autoneg..\n",
- psr & 0x3, want);
- miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev],0,
- miiphy_read_ret(ether_port_phy_addr[p->dev],0) | (1<<9));
- udelay(10000); /* the EVB's GT takes a while to notice phy
- went down and up */
- }
- }
-}
-#endif
-
-/**************************************************************************
-PROBE - Look for an adapter, this routine's visible to the outside
-***************************************************************************/
-int
-gt6426x_eth_probe(void *v, bd_t *bis)
-{
- struct eth_device *wp = (struct eth_device *)v;
- struct eth_dev_s *p = (struct eth_dev_s *)wp->priv;
- int dev = p->dev;
- unsigned int reg_base = p->reg_base;
- unsigned long temp;
- int i;
-
- if (( dev < 0 ) || ( dev >= GAL_ETH_DEVS ))
- { /* This should never happen */
- printf("%s: Invalid device %d\n", __FUNCTION__, dev );
- return 0;
- }
-
-#ifdef DEBUG
- printf ("%s: initializing %s\n", __FUNCTION__, wp->name );
- printf ("\nCOMM_CONTROL = %08x , COMM_CONF = %08x\n",
- GTREGREAD(COMM_UNIT_ARBITER_CONTROL),
- GTREGREAD(COMM_UNIT_ARBITER_CONFIGURATION_REGISTER));
-#endif
-
- /* clear MIB counters */
- for(i=0;i<255; i++)
- temp=GTREGREAD(ETHERNET0_MIB_COUNTER_BASE + reg_base +i);
-
-#ifdef CONFIG_INTEL_LXT97X
- /* for intel LXT972 */
-
- /* led 1: 0x1=txact
- led 2: 0xc=link/rxact
- led 3: 0x2=rxact (N/C)
- strch: 0,2=30 ms, enable */
- miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev], 20, 0x1c22);
-
- /* 2.7ns port rise time */
- /*miiphy_write(ether_port_phy_addr[p->dev], 30, 0x0<<10); */
-#else
- /* already set up in mpsc.c */
- /*GT_REG_WRITE(MAIN_ROUTING_REGISTER, 0x7ffe38); / b400 */
-
- /* already set up in sdram_init.S... */
- /* MPSC0, MPSC1, RMII */
- /*GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, 0x1102); / f010 */
-#endif
- GT_REG_WRITE(ETHERNET_PHY_ADDRESS_REGISTER,
- ether_port_phy_addr[0] |
- (ether_port_phy_addr[1]<<5) |
- (ether_port_phy_addr[2]<<10)); /* 2000 */
-
- /* 13:12 - 10: 4x64bit burst (cache line size = 32 bytes)
- * 9 - 1: RIFB - interrupt on frame boundaries only
- * 6:7 - 00: big endian rx and tx
- * 5:2 - 1111: 15 retries */
- GT_REG_WRITE(ETHERNET0_SDMA_CONFIGURATION_REGISTER + reg_base,
- (2<<12) | (1<<9) | (0xf<<2) ); /* 2440 */
-
-#ifndef USE_SOFTWARE_CACHE_MANAGEMENT
- /* enable rx/tx desc/buffer cache snoop */
- GT_REG_READ(ETHERNET_0_ADDRESS_CONTROL_LOW + dev*0x20,
- &temp); /* f200 */
- temp|= (1<<6)| (1<<14)| (1<<22)| (1<<30);
- GT_REG_WRITE(ETHERNET_0_ADDRESS_CONTROL_LOW + dev*0x20,
- temp);
-#endif
-
- /* 31 28 27 24 23 20 19 16
- * 0000 0000 0000 0000 [0004]
- * 15 12 11 8 7 4 3 0
- * 1000 1101 0000 0000 [4d00]
- * 20 - 0=MII 1=RMII
- * 19 - 0=speed autoneg
- * 15:14 - framesize 1536 (GT6426x_ETH_BUF_SIZE)
- * 11 - no force link pass
- * 10 - 1=disable fctl autoneg
- * 8 - override prio ?? */
- temp = 0x00004d00;
-#ifndef CONFIG_ETHER_PORT_MII
- temp |= (1<<20); /* RMII */
-#endif
- /* set En */
- GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER + reg_base,
- temp); /* 2408 */
-
- /* hardcode E1 also? */
- /* -- according to dox, this is safer due to extra pulldowns? */
- if (dev<2) {
- GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER + (dev+1) * 0x400,
- temp); /* 2408 */
- }
-
- /* wake up MAC */ /* 2400 */
- GT_REG_READ(ETHERNET0_PORT_CONFIGURATION_REGISTER + reg_base, &temp);
- temp |= (1<<7); /* enable port */
-#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
- temp |= (1<<12); /* hash size 1/2k */
-#else
- temp |= 1; /* promisc */
-#endif
- GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_REGISTER + reg_base, temp);
- /* 2400 */
-
-#ifdef RESTART_AUTONEG
- check_phy_state(p);
-#endif
-
- printf("%s: Waiting for link up..\n", wp->name);
- temp = 10 * 1000;
- /* wait for link back up */
- while(!(GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + reg_base) & 8)
- && (--temp > 0)){
- udelay(1000); /* wait 1 ms */
- }
- if ( temp == 0) {
- printf("%s: Failed!\n", wp->name);
- return (0);
- }
-
- printf("%s: OK!\n", wp->name);
-
- p->tdn = 0;
- p->rdn = 0;
- p->eth_tx_desc[p->tdn].command_status = 0;
-
- /* Initialize Rx Side */
- for (temp = 0; temp < NR; temp++) {
- p->eth_rx_desc[temp].buff_pointer = (uchar *)p->eth_rx_buffer[temp];
- p->eth_rx_desc[temp].buff_size_byte_count = GT6426x_ETH_BUF_SIZE<<16;
-
- /* GT96100 Owner */
- p->eth_rx_desc[temp].command_status = 0x80000000;
- p->eth_rx_desc[temp].next_desc =
- (struct eth0_rx_desc_struct *)
- &p->eth_rx_desc[(temp+1)%NR].buff_size_byte_count;
- }
-
- FLUSH_DCACHE((unsigned int)&p->eth_tx_desc[0],
- (unsigned int)&p->eth_tx_desc[NR]);
- FLUSH_DCACHE((unsigned int)&p->eth_rx_desc[0],
- (unsigned int)&p->eth_rx_desc[NR]);
-
- GT_REG_WRITE(ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 + reg_base,
- (unsigned int) p->eth_tx_desc);
- GT_REG_WRITE(ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 + reg_base,
- (unsigned int) p->eth_rx_desc);
- GT_REG_WRITE(ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 + reg_base,
- (unsigned int) p->eth_rx_desc);
-
-#ifdef DEBUG
- printf ("\nRx descriptor pointer is %08x %08x\n",
- GTREGREAD(ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 + reg_base),
- GTREGREAD(ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 + reg_base));
- printf ("\n\n%08x %08x\n",
- (unsigned int)p->eth_rx_desc,p->eth_rx_desc[0].command_status);
-
- printf ("Descriptor dump:\n");
- printf ("cmd status: %08x\n",p->eth_rx_desc[0].command_status);
- printf ("byte_count: %08x\n",p->eth_rx_desc[0].buff_size_byte_count);
- printf ("buff_ptr: %08x\n",(unsigned int)p->eth_rx_desc[0].buff_pointer);
- printf ("next_desc: %08x\n\n",(unsigned int)p->eth_rx_desc[0].next_desc);
- printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x0));
- printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x4));
- printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x8));
- printf ("%08x\n\n",
- *(unsigned int *) ((unsigned int)p->eth_rx_desc + 0xc));
-#endif
-
-#ifdef DEBUG
- gt6426x_dump_mii(bis,ether_port_phy_addr[p->dev]);
-#endif
-
-#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
- {
- unsigned int hashtable_base;
- u8 *b = (u8 *)(wp->enetaddr);
- u32 macH, macL;
-
- /* twist the MAC up into the way the discovery wants it */
- macH= (b[0]<<8) | b[1];
- macL= (b[2]<<24) | (b[3]<<16) | (b[4]<<8) | b[5];
-
- /* mode 0, size 0x800 */
- hashtable_base =initAddressTable(dev,0,1);
-
- if(!hashtable_base) {
- printf("initAddressTable failed\n");
- return 0;
- }
-
- addAddressTableEntry(dev, macH, macL, 1, 0);
- GT_REG_WRITE(ETHERNET0_HASH_TABLE_POINTER_REGISTER + reg_base,
- hashtable_base);
- }
-#endif
-
- /* Start Rx*/
- GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + reg_base, 0x00000080);
- printf("%s: gt6426x eth device %d init success \n", wp->name, dev );
- return 1;
-}
-
-/* enter all the galileo ethernet devs into MULTI-BOOT */
-void
-gt6426x_eth_initialize(bd_t *bis)
-{
- struct eth_device *dev;
- struct eth_dev_s *p;
- int devnum, x, temp;
- char *s, *e, buf[64];
-
-#ifdef DEBUG
- printf( "\n%s\n", __FUNCTION );
-#endif
-
- for (devnum = 0; devnum < GAL_ETH_DEVS; devnum++) {
- dev = calloc(sizeof(*dev), 1);
- if (!dev) {
- printf( "%s: gal_enet%d allocation failure, %s\n",
- __FUNCTION__, devnum, "eth_device structure");
- return;
- }
-
- /* must be less than sizeof(dev->name) */
- sprintf(dev->name, "gal_enet%d", devnum);
-
-#ifdef DEBUG
- printf( "Initializing %s\n", dev->name );
-#endif
-
- /* Extract the MAC address from the environment */
- switch (devnum)
- {
- case 0: s = "ethaddr"; break;
-#if (GAL_ETH_DEVS > 1)
- case 1: s = "eth1addr"; break;
-#endif
-#if (GAL_ETH_DEVS > 2)
- case 2: s = "eth2addr"; break;
-#endif
- default: /* this should never happen */
- printf( "%s: Invalid device number %d\n",
- __FUNCTION__, devnum );
- return;
- }
-
- temp = getenv_f(s, buf, sizeof(buf));
- s = (temp > 0) ? buf : NULL;
-
-#ifdef DEBUG
- printf ("Setting MAC %d to %s\n", devnum, s );
-#endif
- for (x = 0; x < 6; ++x) {
- dev->enetaddr[x] = s ? simple_strtoul(s, &e, 16) : 0;
- if (s)
- s = (*e) ? e+1 : e;
- }
-
- dev->init = (void*)gt6426x_eth_probe;
- dev->halt = (void*)gt6426x_eth_reset;
- dev->send = (void*)gt6426x_eth_transmit;
- dev->recv = (void*)gt6426x_eth_poll;
-
- p = calloc( sizeof(*p), 1 );
- dev->priv = (void*)p;
- if (!p)
- {
- printf( "%s: %s allocation failure, %s\n",
- __FUNCTION__, dev->name, "Private Device Structure");
- free(dev);
- return;
- }
-
- p->dev = devnum;
- p->tdn=0;
- p->rdn=0;
- p->reg_base = devnum * ETHERNET_PORTS_DIFFERENCE_OFFSETS;
-
- p->eth_tx_desc =
- (eth0_tx_desc_single *)
- (((unsigned int) malloc(sizeof (eth0_tx_desc_single) *
- (NT+1)) & 0xfffffff0) + 0x10);
- if (!p)
- {
- printf( "%s: %s allocation failure, %s\n",
- __FUNCTION__, dev->name, "Tx Descriptor");
- free(dev);
- return;
- }
-
- p->eth_rx_desc =
- (eth0_rx_desc_single *)
- (((unsigned int) malloc(sizeof (eth0_rx_desc_single) *
- (NR+1)) & 0xfffffff0) + 0x10);
- if (!p->eth_rx_desc)
- {
- printf( "%s: %s allocation failure, %s\n",
- __FUNCTION__, dev->name, "Rx Descriptor");
- free(dev);
- free(p);
- return;
- }
-
- p->eth_tx_buffer =
- (char *) (((unsigned int) malloc(GT6426x_ETH_BUF_SIZE) & 0xfffffff0) + 0x10);
- if (!p->eth_tx_buffer)
- {
- printf( "%s: %s allocation failure, %s\n",
- __FUNCTION__, dev->name, "Tx Bufffer");
- free(dev);
- free(p);
- free(p->eth_rx_desc);
- return;
- }
-
- for (temp = 0 ; temp < NR ; temp ++) {
- p->eth_rx_buffer[temp] =
- (char *)
- (((unsigned int) malloc(GT6426x_ETH_BUF_SIZE) & 0xfffffff0) + 0x10);
- if (!p->eth_rx_buffer[temp])
- {
- printf( "%s: %s allocation failure, %s\n",
- __FUNCTION__, dev->name, "Rx Buffers");
- free(dev);
- free(p);
- free(p->eth_tx_buffer);
- free(p->eth_rx_desc);
- free(p->eth_tx_desc);
- while (temp >= 0)
- free(p->eth_rx_buffer[--temp]);
- return;
- }
- }
-
-
- eth_register(dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register(dev->name,
- gt6426x_miiphy_read, gt6426x_miiphy_write);
-#endif
- }
-
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * eth.h - header file for the polled mode GT ethernet driver
- */
-
-#ifndef __GT6426x_ETH_H__
-#define __GT6426x_ETH_H__
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <common.h>
-
-typedef struct eth0_tx_desc_struct {
- volatile __u32 bytecount_reserved;
- volatile __u32 command_status;
- volatile struct eth0_tx_desc_struct * next_desc;
- /* Note - the following will not work for 64 bit addressing */
- volatile unsigned char * buff_pointer;
-} __attribute__ ((packed)) eth0_tx_desc_single;
-
-typedef struct eth0_rx_desc_struct {
- volatile __u32 buff_size_byte_count;
- volatile __u32 command_status;
- volatile struct eth0_rx_desc_struct * next_desc;
- volatile unsigned char * buff_pointer;
-} __attribute__ ((packed)) eth0_rx_desc_single;
-
-#define NT 20 /* Number of Transmit buffers */
-#define NR 20 /* Number of Receive buffers */
-#define MAX_BUFF_SIZE (1536+2*CACHE_LINE_SIZE) /* 1600 */
-#define ETHERNET_PORTS_DIFFERENCE_OFFSETS 0x400
-
-unsigned long TDN_ETH0 , RDN_ETH0; /* Rx/Tx current Descriptor Number*/
-unsigned int EVB64260_ETH0_irq;
-
-#define CLOSED 0
-#define OPENED 1
-
-#define PORT_ETH0 0
-
-extern eth0_tx_desc_single *eth0_tx_desc;
-extern eth0_rx_desc_single *eth0_rx_desc;
-extern char *eth0_tx_buffer;
-extern char *eth0_rx_buffer[NR];
-extern char *eth_data;
-
-extern int gt6426x_eth_poll(void *v);
-extern int gt6426x_eth_transmit(void *v, char *p, unsigned int s);
-extern void gt6426x_eth_disable(void *v);
-extern int gt6426x_eth_probe(void *v, bd_t *bis);
-
-#endif /* __GT64260x_ETH_H__ */
+++ /dev/null
-#include <common.h>
-#include <malloc.h>
-#include <galileo/gt64260R.h>
-#include <galileo/core.h>
-#include <asm/cache.h>
-#include "eth.h"
-#include "eth_addrtbl.h"
-
-#define PRINTF printf
-
-#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
-
-static u32 addressTableHashMode[GAL_ETH_DEVS] = { 0, };
-static u32 addressTableHashSize[GAL_ETH_DEVS] = { 0, };
-static addrTblEntry *addressTableBase[GAL_ETH_DEVS] = { 0, };
-static void *realAddrTableBase[GAL_ETH_DEVS] = { 0, };
-
-static const u32 hashLength[2] = {
- (0x8000), /* 8K * 4 entries */
- (0x8000 / 16), /* 512 * 4 entries */
-};
-
-/* Initialize the address table for a port, if needed */
-unsigned int initAddressTable (u32 port, u32 hashMode, u32 hashSizeSelector)
-{
- unsigned int tableBase;
-
- if (port < 0 || port >= GAL_ETH_DEVS) {
- printf ("%s: Invalid port number %d\n", __FUNCTION__, port);
- return 0;
- }
-
- if (hashMode > 1) {
- printf ("%s: Invalid Hash Mode %d\n", __FUNCTION__, port);
- return 0;
- }
-
- if (realAddrTableBase[port] &&
- (addressTableHashSize[port] != hashSizeSelector)) {
- /* we have been here before,
- * but now we want a different sized table
- */
- free (realAddrTableBase[port]);
- realAddrTableBase[port] = 0;
- addressTableBase[port] = 0;
-
- }
-
- tableBase = (unsigned int) addressTableBase[port];
- /* we get called for every probe, so only do this once */
- if (!tableBase) {
- int bytes =
- hashLength[hashSizeSelector] * sizeof (addrTblEntry);
-
- realAddrTableBase[port] =
- malloc (bytes + 64);
- tableBase = (unsigned int)realAddrTableBase;
-
- if (!tableBase) {
- printf ("%s: alloc memory failed \n", __FUNCTION__);
- return 0;
- }
-
- /* align to octal byte */
- if (tableBase & 63)
- tableBase = (tableBase + 63) & ~63;
-
- addressTableHashMode[port] = hashMode;
- addressTableHashSize[port] = hashSizeSelector;
- addressTableBase[port] = (addrTblEntry *) tableBase;
-
- memset ((void *) tableBase, 0, bytes);
- }
-
- return tableBase;
-}
-
-/*
- * ----------------------------------------------------------------------------
- * This function will calculate the hash function of the address.
- * depends on the hash mode and hash size.
- * Inputs
- * macH - the 2 most significant bytes of the MAC address.
- * macL - the 4 least significant bytes of the MAC address.
- * hashMode - hash mode 0 or hash mode 1.
- * hashSizeSelector - indicates number of hash table entries (0=0x8000,1=0x800)
- * Outputs
- * return the calculated entry.
- */
-u32 hashTableFunction (u32 macH, u32 macL, u32 HashSize, u32 hash_mode)
-{
- u32 hashResult;
- u32 addrH;
- u32 addrL;
- u32 addr0;
- u32 addr1;
- u32 addr2;
- u32 addr3;
- u32 addrHSwapped;
- u32 addrLSwapped;
-
-
- addrH = NIBBLE_SWAPPING_16_BIT (macH);
- addrL = NIBBLE_SWAPPING_32_BIT (macL);
-
- addrHSwapped = FLIP_4_BITS (addrH & 0xf)
- + ((FLIP_4_BITS ((addrH >> 4) & 0xf)) << 4)
- + ((FLIP_4_BITS ((addrH >> 8) & 0xf)) << 8)
- + ((FLIP_4_BITS ((addrH >> 12) & 0xf)) << 12);
-
- addrLSwapped = FLIP_4_BITS (addrL & 0xf)
- + ((FLIP_4_BITS ((addrL >> 4) & 0xf)) << 4)
- + ((FLIP_4_BITS ((addrL >> 8) & 0xf)) << 8)
- + ((FLIP_4_BITS ((addrL >> 12) & 0xf)) << 12)
- + ((FLIP_4_BITS ((addrL >> 16) & 0xf)) << 16)
- + ((FLIP_4_BITS ((addrL >> 20) & 0xf)) << 20)
- + ((FLIP_4_BITS ((addrL >> 24) & 0xf)) << 24)
- + ((FLIP_4_BITS ((addrL >> 28) & 0xf)) << 28);
-
- addrH = addrHSwapped;
- addrL = addrLSwapped;
-
- if (hash_mode == 0) {
- addr0 = (addrL >> 2) & 0x03f;
- addr1 = (addrL & 0x003) | ((addrL >> 8) & 0x7f) << 2;
- addr2 = (addrL >> 15) & 0x1ff;
- addr3 = ((addrL >> 24) & 0x0ff) | ((addrH & 1) << 8);
- } else {
- addr0 = FLIP_6_BITS (addrL & 0x03f);
- addr1 = FLIP_9_BITS (((addrL >> 6) & 0x1ff));
- addr2 = FLIP_9_BITS ((addrL >> 15) & 0x1ff);
- addr3 = FLIP_9_BITS ((((addrL >> 24) & 0x0ff) |
- ((addrH & 0x1) << 8)));
- }
-
- hashResult = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
-
- if (HashSize == _8K_TABLE) {
- hashResult = hashResult & 0xffff;
- } else {
- hashResult = hashResult & 0x07ff;
- }
-
- return (hashResult);
-}
-
-
-/*
- * ----------------------------------------------------------------------------
- * This function will add an entry to the address table.
- * depends on the hash mode and hash size that was initialized.
- * Inputs
- * port - ETHERNET port number.
- * macH - the 2 most significant bytes of the MAC address.
- * macL - the 4 least significant bytes of the MAC address.
- * skip - if 1, skip this address.
- * rd - the RD field in the address table.
- * Outputs
- * address table entry is added.
- * true if success.
- * false if table full
- */
-int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
-{
- addrTblEntry *entry;
- u32 newHi;
- u32 newLo;
- u32 i;
-
- newLo = (((macH >> 4) & 0xf) << 15)
- | (((macH >> 0) & 0xf) << 11)
- | (((macH >> 12) & 0xf) << 7)
- | (((macH >> 8) & 0xf) << 3)
- | (((macL >> 20) & 0x1) << 31)
- | (((macL >> 16) & 0xf) << 27)
- | (((macL >> 28) & 0xf) << 23)
- | (((macL >> 24) & 0xf) << 19)
- | (skip << SKIP_BIT) | (rd << 2) | VALID;
-
- newHi = (((macL >> 4) & 0xf) << 15)
- | (((macL >> 0) & 0xf) << 11)
- | (((macL >> 12) & 0xf) << 7)
- | (((macL >> 8) & 0xf) << 3)
- | (((macL >> 21) & 0x7) << 0);
-
- /*
- * Pick the appropriate table, start scanning for free/reusable
- * entries at the index obtained by hashing the specified MAC address
- */
- entry = addressTableBase[port];
- entry += hashTableFunction (macH, macL, addressTableHashSize[port],
- addressTableHashMode[port]);
- for (i = 0; i < HOP_NUMBER; i++, entry++) {
- if (!(entry->lo & VALID) /*|| (entry->lo & SKIP) */ ) {
- break;
- } else { /* if same address put in same position */
- if (((entry->lo & 0xfffffff8) == (newLo & 0xfffffff8))
- && (entry->hi == newHi)) {
- break;
- }
- }
- }
-
- if (i == HOP_NUMBER) {
- PRINTF ("addGT64260addressTableEntry: table section is full\n");
- return false;
- }
-
- /*
- * Update the selected entry
- */
- entry->hi = newHi;
- entry->lo = newLo;
- DCACHE_FLUSH_N_SYNC ((u32) entry, MAC_ENTRY_SIZE);
- return true;
-}
-
-#endif /* CONFIG_GT_USE_MAC_HASH_TABLE */
+++ /dev/null
-#ifndef _ADDRESS_TABLE_H
-#define _ADDRESS_TABLE_H 1
-
-/*
- * ----------------------------------------------------------------------------
- * addressTable.h - this file has all the declarations of the address table
- */
-
-#define _8K_TABLE 0
-#define ADDRESS_TABLE_ALIGNMENT 8
-#define HASH_DEFAULT_MODE 14
-#define HASH_MODE 13
-#define HASH_SIZE 12
-#define HOP_NUMBER 12
-#define MAC_ADDRESS_STRING_SIZE 12
-#define MAC_ENTRY_SIZE sizeof(addrTblEntry)
-#define MAX_NUMBER_OF_ADDRESSES_TO_STORE 1000
-#define PROMISCUOUS_MODE 0
-#define SKIP 1<<1
-#define SKIP_BIT 1
-#define VALID 1
-
-/*
- * ----------------------------------------------------------------------------
- * XXX_MIKE - potential sign-extension bugs lurk here...
- */
-#define NIBBLE_SWAPPING_32_BIT(X) ( (((X) & 0xf0f0f0f0) >> 4) \
- | (((X) & 0x0f0f0f0f) << 4) )
-
-#define NIBBLE_SWAPPING_16_BIT(X) ( (((X) & 0x0000f0f0) >> 4) \
- | (((X) & 0x00000f0f) << 4) )
-
-#define FLIP_4_BITS(X) ( (((X) & 0x01) << 3) | (((X) & 0x002) << 1) \
- | (((X) & 0x04) >> 1) | (((X) & 0x008) >> 3) )
-
-#define FLIP_6_BITS(X) ( (((X) & 0x01) << 5) | (((X) & 0x020) >> 5) \
- | (((X) & 0x02) << 3) | (((X) & 0x010) >> 3) \
- | (((X) & 0x04) << 1) | (((X) & 0x008) >> 1) )
-
-#define FLIP_9_BITS(X) ( (((X) & 0x01) << 8) | (((X) & 0x100) >> 8) \
- | (((X) & 0x02) << 6) | (((X) & 0x080) >> 6) \
- | (((X) & 0x04) << 4) | (((X) & 0x040) >> 4) \
- | ((X) & 0x10) | (((X) & 0x08) << 2) | (((X) & 0x020) >> 2) )
-
-/*
- * V: value we're operating on
- * O: offset of rightmost bit in field
- * W: width of field to shift
- * S: distance to shift left
- */
-#define MASK( fieldWidth ) ((1 << (fieldWidth)) - 1)
-#define leftShiftedBitfield( V,O,W,S) (((V) & (MASK(W) << (O))) << (S))
-#define rightShiftedBitfield(V,O,W,S) (((u32)((V) & (MASK(W) << (O)))) >> (S))
-
-
-/*
- * Push to main memory all cache lines associated with
- * the specified range of virtual memory addresses
- *
- * A: Address of first byte in range to flush
- * N: Number of bytes to flush
- * Note - flush_dcache_range() does a "sync", does NOT invalidate
- */
-#define DCACHE_FLUSH_N_SYNC( A, N ) flush_dcache_range( (A), ((A)+(N)) )
-
-
-typedef struct addressTableEntryStruct {
- u32 hi;
- u32 lo;
-} addrTblEntry;
-
-u32
-uncachedPages( u32 pages );
-u32
-hashTableFunction( u32 macH, u32 macL, u32 HashSize, u32 hash_mode );
-
-unsigned int
-initAddressTable( u32 port, u32 hashMode, u32 hashSize );
-
-int
-addAddressTableEntry( u32 port, u32 macH, u32 macL, u32 rd, u32 skip );
-
-#endif /* #ifndef _ADDRESS_TABLE_H */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * evb64260.c - main board support/init for the Galileo Eval board.
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <galileo/memory.h>
-#include <galileo/pci.h>
-#include <galileo/gt64260R.h>
-#include <net.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-
-#include <asm/io.h>
-#include "eth.h"
-#include "mpsc.h"
-#include "i2c.h"
-#include "64260.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_ZUMA_V2
-extern void zuma_mbox_init(void);
-#endif
-
-#undef DEBUG
-#define MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-/* this is the current GT register space location */
-/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
-
-/* Unfortunately, we cant change it while we are in flash, so we initialize it
- * to the "final" value. This means that any debug_led calls before
- * board_early_init_f wont work right (like in cpu_init_f).
- * See also my_remap_gt_regs below. (NTL)
- */
-
-unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This is a version of the GT register space remapping function that
- * doesn't touch globals (meaning, it's ok to run from flash.)
- *
- * Unfortunately, this has the side effect that a writable
- * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
- */
-
-void
-my_remap_gt_regs(u32 cur_loc, u32 new_loc)
-{
- u32 temp;
-
- /* check and see if it's already moved */
- temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
- if ((temp & 0xffff) == new_loc >> 20)
- return;
-
- temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
- 0xffff0000) | (new_loc >> 20);
-
- out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
-
- while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
-}
-
-static void
-gt_pci_config(void)
-{
- /* move PCI stuff out of the way - NTL */
- /* map PCI Host 0 */
- pciMapSpace(PCI_HOST0, PCI_REGION0, CONFIG_SYS_PCI0_0_MEM_SPACE,
- CONFIG_SYS_PCI0_0_MEM_SPACE, CONFIG_SYS_PCI0_MEM_SIZE);
-
- pciMapSpace(PCI_HOST0, PCI_REGION1, 0, 0, 0);
- pciMapSpace(PCI_HOST0, PCI_REGION2, 0, 0, 0);
- pciMapSpace(PCI_HOST0, PCI_REGION3, 0, 0, 0);
-
- pciMapSpace(PCI_HOST0, PCI_IO, CONFIG_SYS_PCI0_IO_SPACE_PCI,
- CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE);
-
- /* map PCI Host 1 */
- pciMapSpace(PCI_HOST1, PCI_REGION0, CONFIG_SYS_PCI1_0_MEM_SPACE,
- CONFIG_SYS_PCI1_0_MEM_SPACE, CONFIG_SYS_PCI1_MEM_SIZE);
-
- pciMapSpace(PCI_HOST1, PCI_REGION1, 0, 0, 0);
- pciMapSpace(PCI_HOST1, PCI_REGION2, 0, 0, 0);
- pciMapSpace(PCI_HOST1, PCI_REGION3, 0, 0, 0);
-
- pciMapSpace(PCI_HOST1, PCI_IO, CONFIG_SYS_PCI1_IO_SPACE_PCI,
- CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE);
-
- /* PCI interface settings */
- GT_REG_WRITE(PCI_0TIMEOUT_RETRY, 0xffff);
- GT_REG_WRITE(PCI_1TIMEOUT_RETRY, 0xffff);
- GT_REG_WRITE(PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e);
- GT_REG_WRITE(PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffff80e);
-
-
-}
-
-/* Setup CPU interface paramaters */
-static void
-gt_cpu_config(void)
-{
- cpu_t cpu = get_cpu_type();
- ulong tmp;
-
- /* cpu configuration register */
- tmp = GTREGREAD(CPU_CONFIGURATION);
-
- /* set the AACK delay bit
- * see Res#14 */
- tmp |= CPU_CONF_AACK_DELAY;
- tmp &= ~CPU_CONF_AACK_DELAY_2; /* New RGF */
-
- /* Galileo claims this is necessary for all busses >= 100 MHz */
- tmp |= CPU_CONF_FAST_CLK;
-
- if (cpu == CPU_750CX) {
- tmp &= ~CPU_CONF_DP_VALID; /* Safer, needed for CXe. RGF */
- tmp &= ~CPU_CONF_AP_VALID;
- } else {
- tmp |= CPU_CONF_DP_VALID;
- tmp |= CPU_CONF_AP_VALID;
- }
-
- /* this only works with the MPX bus */
- tmp &= ~CPU_CONF_RD_OOO; /* Safer RGF */
- tmp |= CPU_CONF_PIPELINE;
- tmp |= CPU_CONF_TA_DELAY;
-
- GT_REG_WRITE(CPU_CONFIGURATION, tmp);
-
- /* CPU master control register */
- tmp = GTREGREAD(CPU_MASTER_CONTROL);
-
- tmp |= CPU_MAST_CTL_ARB_EN;
-
- if ((cpu == CPU_7400) ||
- (cpu == CPU_7410) ||
- (cpu == CPU_7450)) {
-
- tmp |= CPU_MAST_CTL_CLEAN_BLK;
- tmp |= CPU_MAST_CTL_FLUSH_BLK;
-
- } else {
- /* cleanblock must be cleared for CPUs
- * that do not support this command
- * see Res#1 */
- tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
- tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
- }
- GT_REG_WRITE(CPU_MASTER_CONTROL, tmp);
-}
-
-/*
- * board_early_init_f.
- *
- * set up gal. device mappings, etc.
- */
-int board_early_init_f (void)
-{
- uchar sram_boot = 0;
-
- /*
- * set up the GT the way the kernel wants it
- * the call to move the GT register space will obviously
- * fail if it has already been done, but we're going to assume
- * that if it's not at the power-on location, it's where we put
- * it last time. (huber)
- */
- my_remap_gt_regs(CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
-
- gt_pci_config();
-
- /* mask all external interrupt sources */
- GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
- GT_REG_WRITE(CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
- GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
- GT_REG_WRITE(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
- GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
- GT_REG_WRITE(PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
- GT_REG_WRITE(CPU_INT_0_MASK, 0);
- GT_REG_WRITE(CPU_INT_1_MASK, 0);
- GT_REG_WRITE(CPU_INT_2_MASK, 0);
- GT_REG_WRITE(CPU_INT_3_MASK, 0);
-
- /* now, onto the configuration */
- GT_REG_WRITE(SDRAM_CONFIGURATION, CONFIG_SYS_SDRAM_CONFIG);
-
- /* ----- DEVICE BUS SETTINGS ------ */
-
- /*
- * EVB
- * 0 - SRAM
- * 1 - RTC
- * 2 - UART
- * 3 - Flash
- * boot - BootCS
- *
- * Zuma
- * 0 - Flash
- * boot - BootCS
- */
-
- /*
- * the dual 7450 module requires burst access to the boot
- * device, so the serial rom copies the boot device to the
- * on-board sram on the eval board, and updates the correct
- * registers to boot from the sram. (device0)
- */
-#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
- /* Zuma has no SRAM */
- sram_boot = 0;
-#else
- if (memoryGetDeviceBaseAddress(DEVICE0) && 0xfff00000 == CONFIG_SYS_MONITOR_BASE)
- sram_boot = 1;
-#endif
-
- memoryMapDeviceSpace(DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
-
- memoryMapDeviceSpace(DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
- memoryMapDeviceSpace(DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
- memoryMapDeviceSpace(DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
-
- /* configure device timing */
-#ifdef CONFIG_SYS_DEV0_PAR
- if (!sram_boot)
- GT_REG_WRITE(DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
-#endif
-
-#ifdef CONFIG_SYS_DEV1_PAR
- GT_REG_WRITE(DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
-#endif
-#ifdef CONFIG_SYS_DEV2_PAR
- GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
-#endif
-
-#ifdef CONFIG_EVB64260
-#ifdef CONFIG_SYS_32BIT_BOOT_PAR
- /* detect if we are booting from the 32 bit flash */
- if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
- /* 32 bit boot flash */
- GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
- GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
- } else {
- /* 8 bit boot flash */
- GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
- GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
- }
-#else
- /* 8 bit boot flash only */
- GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
-#endif
-#else /* CONFIG_EVB64260 not defined */
- /* We are booting from 16-bit flash.
- */
- GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_16BIT_BOOT_PAR);
-#endif
-
- gt_cpu_config();
-
- /* MPP setup */
- GT_REG_WRITE(MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
- GT_REG_WRITE(MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
- GT_REG_WRITE(MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
- GT_REG_WRITE(MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
-
- GT_REG_WRITE(GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
- GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, CONFIG_SYS_SERIAL_PORT_MUX);
-
- return 0;
-}
-
-/* various things to do after relocation */
-
-int misc_init_r (void)
-{
- icache_enable();
-#ifdef CONFIG_SYS_L2
- l2cache_enable();
-#endif
-
-#ifdef CONFIG_MPSC
- mpsc_init2();
-#endif
-
-#ifdef CONFIG_ZUMA_V2
- zuma_mbox_init();
-#endif
- return (0);
-}
-
-void
-after_reloc(ulong dest_addr)
-{
- /* check to see if we booted from the sram. If so, move things
- * back to the way they should be. (we're running from main
- * memory at this point now */
-
- if (memoryGetDeviceBaseAddress(DEVICE0) == CONFIG_SYS_MONITOR_BASE) {
- memoryMapDeviceSpace(DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
- memoryMapDeviceSpace(BOOT_DEVICE, CONFIG_SYS_FLASH_BASE, _1M);
- }
-
- /* now, jump to the main U-Boot board init code */
- board_init_r ((gd_t *)gd, dest_addr);
-
- /* NOTREACHED */
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int
-checkboard (void)
-{
- puts ("Board: " CONFIG_SYS_BOARD_NAME "\n");
- return (0);
-}
-
-/* utility functions */
-void
-debug_led(int led, int mode)
-{
-#if !defined(CONFIG_ZUMA_V2) && !defined(CONFIG_P3G4)
- volatile int *addr = NULL;
- __maybe_unused int dummy;
-
- if (mode == 1) {
- switch (led) {
- case 0:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x08000);
- break;
-
- case 1:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x0c000);
- break;
-
- case 2:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x10000);
- break;
- }
- } else if (mode == 0) {
- switch (led) {
- case 0:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x14000);
- break;
-
- case 1:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x18000);
- break;
-
- case 2:
- addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x1c000);
- break;
- }
- }
- WRITE_CHAR(addr, 0);
- dummy = *addr;
-#endif /* CONFIG_ZUMA_V2 */
-}
-
-void
-display_mem_map(void)
-{
- int i,j;
- unsigned int base,size,width;
- /* SDRAM */
- printf("SDRAM\n");
- for(i=0;i<=BANK3;i++) {
- base = memoryGetBankBaseAddress(i);
- size = memoryGetBankSize(i);
- if(size !=0)
- {
- printf("BANK%d: base - 0x%08x\tsize - %dM bytes\n",i,base,size>>20);
- }
- }
-
- /* CPU's PCI windows */
- for(i=0;i<=PCI_HOST1;i++) {
- printf("\nCPU's PCI %d windows\n", i);
- base=pciGetSpaceBase(i,PCI_IO);
- size=pciGetSpaceSize(i,PCI_IO);
- printf(" IO: base - 0x%08x\tsize - %dM bytes\n",base,size>>20);
- for(j=0;j<=PCI_REGION3;j++) {
- base = pciGetSpaceBase(i,j);
- size = pciGetSpaceSize(i,j);
- printf("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n",j,base,
- size>>20);
- }
- }
-
- /* Devices */
- printf("\nDEVICES\n");
- for(i=0;i<=DEVICE3;i++) {
- base = memoryGetDeviceBaseAddress(i);
- size = memoryGetDeviceSize(i);
- width= memoryGetDeviceWidth(i) * 8;
- printf("DEV %d: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
- i, base, size>>20, width);
- }
-
- /* Bootrom */
- base = memoryGetDeviceBaseAddress(BOOT_DEVICE); /* Boot */
- size = memoryGetDeviceSize(BOOT_DEVICE);
- width= memoryGetDeviceWidth(BOOT_DEVICE) * 8;
- printf(" BOOT: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
- base, size>>20, width);
-}
-
-int board_eth_init(bd_t *bis)
-{
- gt6426x_eth_initialize(bis);
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * flash.c - flash support for the 512k, 8bit boot flash on the GEVB
- * most of this file was based on the existing U-Boot
- * flash drivers.
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <galileo/gt64260R.h>
-#include <galileo/memory.h>
-#include "intel_flash.h"
-
-#define FLASH_ROM 0xFFFD /* unknown flash type */
-#define FLASH_RAM 0xFFFE /* unknown flash type */
-#define FLASH_MAN_UNKNOWN 0xFFFF0000
-
-/* #define DEBUG */
-/* #define FLASH_ID_OVERRIDE */ /* Hack to set type to 040B if ROM emulator is installed.
- * Can be used to program a ROM in circuit if a programmer
- * is not available by swapping the rom out. */
-
-/* Intel flash commands */
-int flash_erase_intel(flash_info_t *info, int s_first, int s_last);
-int write_word_intel(bank_addr_t addr, bank_word_t value);
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long
-flash_init (void)
-{
- unsigned int i;
- unsigned long size_b0 = 0, size_b1 = 0;
- unsigned long base, flash_size;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* the boot flash */
- base = CONFIG_SYS_FLASH_BASE;
-#ifndef CONFIG_SYS_BOOT_FLASH_WIDTH
-#define CONFIG_SYS_BOOT_FLASH_WIDTH 1
-#endif
- size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
- &flash_info[0]);
-
-#ifndef CONFIG_P3G4
- printf("[");
- print_size (size_b0, "");
- printf("@%08lX] ", base);
-#endif
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
- base, size_b0, size_b0<<20);
- }
-
- base = memoryGetDeviceBaseAddress(CONFIG_SYS_EXTRA_FLASH_DEVICE);
- for(i=1;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) {
- unsigned long size = flash_get_size(CONFIG_SYS_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);
-
-#ifndef CONFIG_P3G4
- printf("[");
- print_size (size, "");
- printf("@%08lX] ", base);
-#endif
-
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- if(i==1) {
- printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
- base, size_b1, size_b1<<20);
- }
- break;
- }
- size_b1+=size;
- base+=size;
- }
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
- flash_size = size_b0 + size_b1;
- return flash_size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
- int sector_size;
-
- if(!info->sector_count) return;
-
- /* set up sector start address table */
- switch(info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- case FLASH_28F128J3A:
- case FLASH_28F640J3A:
- case FLASH_RAM:
- /* this chip has uniformly spaced sectors */
- sector_size=info->size/info->sector_count;
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * sector_size);
- break;
- default:
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-
-flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- printf ("AM29LV040B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400B:
- printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_28F640J3A:
- printf ("28F640J3A (64 Mbit)\n");
- break;
- case FLASH_28F128J3A:
- printf ("28F128J3A (128 Mbit)\n");
- break;
- case FLASH_ROM:
- printf ("ROM\n");
- break;
- case FLASH_RAM:
- printf ("RAM\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- puts (" Size: ");
- print_size (info->size, "");
- printf (" in %d Sectors\n", info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static inline void flash_cmd(int width, volatile unsigned char *addr, int offset, unsigned char cmd)
-{
- /* supports 1x8, 1x16, and 2x16 */
- /* 2x8 and 4x8 are not supported */
- if(width==4) {
- /* assuming chips are in 16 bit mode */
- /* 2x16 */
- unsigned long cmd32=(cmd<<16)|cmd;
- *(volatile unsigned long *)(addr+offset*2)=cmd32;
- } else if (width == 2) {
- /* 1x16 */
- *(volatile unsigned short *)((unsigned short*)addr+offset)=cmd;
- } else {
- /* 1x8 */
- *(volatile unsigned char *)(addr+offset)=cmd;
- }
-}
-
-static ulong
-flash_get_size (int portwidth, vu_long *addr, flash_info_t *info)
-{
- short i;
- volatile unsigned char *caddr = (unsigned char *)addr;
- volatile unsigned short *saddr = (unsigned short *)addr;
- volatile unsigned long *laddr = (unsigned long *)addr;
- char old[2], save;
- ulong id, manu, base = (ulong)addr;
-
- info->portwidth=portwidth;
-
- save = *caddr;
-
- flash_cmd(portwidth,caddr,0,0xf0);
- flash_cmd(portwidth,caddr,0,0xf0);
-
- udelay(10);
-
- old[0] = caddr[0];
- old[1] = caddr[1];
-
-
- if(old[0]!=0xf0) {
- flash_cmd(portwidth,caddr,0,0xf0);
- flash_cmd(portwidth,caddr,0,0xf0);
-
- udelay(10);
-
- if(*caddr==0xf0) {
- /* this area is ROM */
- *caddr=save;
-#ifndef FLASH_ID_OVERRIDE
- info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
- info->sector_count = 8;
- info->size = 0x80000;
-#else
- info->flash_id = FLASH_MAN_AMD + FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x80000;
- info->chipwidth=1;
-#endif
- flash_get_offsets(base, info);
- return info->size;
- }
- } else {
- *caddr=0;
-
- udelay(10);
-
- if(*caddr==0) {
- /* this area is RAM */
- *caddr=save;
- info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN;
- info->sector_count = 8;
- info->size = 0x80000;
- flash_get_offsets(base, info);
- return info->size;
- }
- flash_cmd(portwidth,caddr,0,0xf0);
-
- udelay(10);
- }
-
- /* Write auto select command: read Manufacturer ID */
- flash_cmd(portwidth,caddr,0x555,0xAA);
- flash_cmd(portwidth,caddr,0x2AA,0x55);
- flash_cmd(portwidth,caddr,0x555,0x90);
-
- udelay(10);
-
- if ((caddr[0] == old[0]) &&
- (caddr[1] == old[1])) {
-
- /* this area is ROM */
-#ifndef FLASH_ID_OVERRIDE
- info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
- info->sector_count = 8;
- info->size = 0x80000;
-#else
- info->flash_id = FLASH_MAN_AMD + FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x80000;
- info->chipwidth=1;
-#endif
- flash_get_offsets(base, info);
- return info->size;
-#ifdef DEBUG
- } else {
- printf("%px%d: %02x:%02x -> %02x:%02x\n",
- caddr, portwidth, old[0], old[1],
- caddr[0], caddr[1]);
-#endif
- }
-
- switch(portwidth) {
- case 1:
- manu = caddr[0];
- manu |= manu<<16;
- id = caddr[1];
- break;
- case 2:
- manu = saddr[0];
- manu |= manu<<16;
- id = saddr[1];
- id |= id<<16;
- break;
- case 4:
- manu = laddr[0];
- id = laddr[1];
- break;
- default:
- id = manu = -1;
- break;
- }
-
-#ifdef DEBUG
- printf("\n%08lx:%08lx:%08lx\n", base, manu, id);
- printf("%08lx %08lx %08lx %08lx\n",
- laddr[0],laddr[1],laddr[2],laddr[3]);
-#endif
-
- switch (manu) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- printf("Unknown Mfr [%08lx]:%08lx\n", manu, id);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- switch (id) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- info->chipwidth=1;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- info->chipwidth=1;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- info->chipwidth=1;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- info->chipwidth=1;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- info->chipwidth=1;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- info->chipwidth=1;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- case AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x80000;
- info->chipwidth=1;
- break;
-
- case INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 128*1024 * 64; /* 128kbytes x 64 blocks */
- info->chipwidth=2;
- if(portwidth==4) info->size*=2; /* 2x16 */
- break;
-
- case INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 128*1024 * 128; /* 128kbytes x 128 blocks */
- info->chipwidth=2;
- if(portwidth==4) info->size*=2; /* 2x16 */
- break;
-
- default:
- printf("Unknown id %lx:[%lx]\n", manu, id);
- info->flash_id = FLASH_UNKNOWN;
- info->chipwidth=1;
- return (0); /* => no or unknown flash */
-
- }
-
- flash_get_offsets(base, info);
-
-#if 0
- /* set up sector start address table */
- if (info->flash_id & FLASH_AM040) {
- /* this chip has uniformly spaced sectors */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
-
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-#endif
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0)=0x02 */
- /* D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- saddr = (volatile unsigned short *)(info->start[i]);
- laddr = (volatile unsigned long *)(info->start[i]);
- if(portwidth==1)
- info->protect[i] = caddr[2] & 1;
- else if(portwidth==2)
- info->protect[i] = saddr[2] & 1;
- else
- info->protect[i] = laddr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (volatile unsigned char *)info->start[0];
-
- flash_cmd(portwidth,caddr,0,0xF0); /* reset bank */
- }
-
- return (info->size);
-}
-
-/* TODO: 2x16 unsupported */
-int
-flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile unsigned char *addr = (uchar *)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- /* TODO: 2x16 unsupported */
- if(info->portwidth==4) return 1;
-
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1;
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
- for (sect = s_first; sect<=s_last; sect++) {
- int sector_size=info->size/info->sector_count;
- addr = (uchar *)(info->start[sect]);
- memset((void *)addr, 0, sector_size);
- }
- return 0;
- }
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id&FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- return flash_erase_intel(info,
- (unsigned short)s_first,
- (unsigned short)s_last);
- }
-
-#if 0
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-#endif
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- flash_cmd(info->portwidth,addr,0x555,0xAA);
- flash_cmd(info->portwidth,addr,0x2AA,0x55);
- flash_cmd(info->portwidth,addr,0x555,0x80);
- flash_cmd(info->portwidth,addr,0x555,0xAA);
- flash_cmd(info->portwidth,addr,0x2AA,0x55);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (uchar *)(info->start[sect]);
- flash_cmd(info->portwidth,addr,0,0x30);
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (volatile unsigned char *)(info->start[l_sect]);
- /* broken for 2x16: TODO */
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned char *)info->start[0];
- flash_cmd(info->portwidth,addr,0,0xf0);
- flash_cmd(info->portwidth,addr,0,0xf0);
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-/* broken for 2x16: TODO */
-int
-write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- if(info->portwidth==4) return 1;
-
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 0;
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
- memcpy((void *)addr, src, cnt);
- return 0;
- }
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-/* broken for 2x16: TODO */
-static int
-write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile unsigned char *addr = (uchar *)(info->start[0]);
- ulong start;
- int flag, i;
-
- if(info->portwidth==4) return 1;
-
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1;
- if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
- *(unsigned long *)dest=data;
- return 0;
- }
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- unsigned short low = data & 0xffff;
- unsigned short hi = (data >> 16) & 0xffff;
- int ret = write_word_intel((bank_addr_t)dest, hi);
-
- if (!ret) ret = write_word_intel((bank_addr_t)(dest+2), low);
-
- return ret;
- }
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* first, perform an unlock bypass command to speed up flash writes */
- addr[0x555] = 0xAA;
- addr[0x2AA] = 0x55;
- addr[0x555] = 0x20;
-
- /* write each byte out */
- for (i = 0; i < 4; i++) {
- char *data_ch = (char *)&data;
- addr[0] = 0xA0;
- *(((char *)dest)+i) = data_ch[i];
- udelay(10); /* XXX */
- }
-
- /* we're done, now do an unlock bypass reset */
- addr[0] = 0x90;
- addr[0] = 0x00;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
+++ /dev/null
-#include <common.h>
-#include <mpc8xx.h>
-#include <malloc.h>
-#include <galileo/gt64260R.h>
-#include <galileo/core.h>
-
-#define MAX_I2C_RETRYS 10
-#define I2C_DELAY 1000 /* Should be at least the # of MHz of Tclk */
-#undef DEBUG_I2C
-
-#ifdef DEBUG_I2C
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-/* Assuming that there is only one master on the bus (us) */
-
-static void
-i2c_init(int speed, int slaveaddr)
-{
- unsigned int n, m, freq, margin, power;
- unsigned int actualn = 0, actualm = 0;
- unsigned int control, status;
- unsigned int minmargin = 0xffffffff;
- unsigned int tclk = 125000000;
-
- DP(puts("i2c_init\n"));
-
- for (n = 0 ; n < 8 ; n++) {
- for (m = 0 ; m < 16 ; m++) {
- power = 2 << n; /* power = 2^(n+1) */
- freq = tclk / (10 * (m + 1) * power);
- if (speed > freq)
- margin = speed - freq;
- else
- margin = freq - speed;
- if (margin < minmargin) {
- minmargin = margin;
- actualn = n;
- actualm = m;
- }
- }
- }
-
- DP(puts("setup i2c bus\n"));
-
- /* Setup bus */
-
- GT_REG_WRITE(I2C_SOFT_RESET, 0);
-
- DP(puts("udelay...\n"));
-
- udelay(I2C_DELAY);
-
- DP(puts("set baudrate\n"));
-
- GT_REG_WRITE(I2C_STATUS_BAUDE_RATE, (actualm << 3) | actualn);
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 2) | (0x1 << 6));
-
- udelay(I2C_DELAY * 10);
-
- DP(puts("read control, baudrate\n"));
-
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- GT_REG_READ(I2C_CONTROL, &control);
-}
-
-static uchar
-i2c_start(void)
-{
- unsigned int control, status;
- int count = 0;
-
- DP(puts("i2c_start\n"));
-
- /* Set the start bit */
-
- GT_REG_READ(I2C_CONTROL, &control);
- control |= (0x1 << 5);
- GT_REG_WRITE(I2C_CONTROL, control);
-
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
-
- count = 0;
- while ((status & 0xff) != 0x08) {
- udelay(I2C_DELAY);
- if (count > 20) {
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
- return status;
- }
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- }
-
- return 0;
-}
-
-static uchar
-i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
-{
- unsigned int status, data, bits = 7;
- int count = 0;
-
- DP(puts("i2c_select_device\n"));
-
- /* Output slave address */
-
- if (ten_bit)
- bits = 10;
-
- data = (dev_addr << 1);
- /* set the read bit */
- data |= read;
- GT_REG_WRITE(I2C_DATA, data);
- /* assert the address */
- RESET_REG_BITS(I2C_CONTROL, BIT3);
-
- udelay(I2C_DELAY);
-
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count = 0;
- while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) {
- udelay(I2C_DELAY);
- if (count > 20) {
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
- return status;
- }
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- }
-
- if (bits == 10) {
- printf("10 bit I2C addressing not yet implemented\n");
- return 0xff;
- }
-
- return 0;
-}
-
-static uchar
-i2c_get_data(uchar *return_data, int len) {
-
- unsigned int data, status = 0;
- int count = 0;
-
- DP(puts("i2c_get_data\n"));
-
- while (len) {
-
- /* Get and return the data */
-
- RESET_REG_BITS(I2C_CONTROL, (0x1 << 3));
-
- udelay(I2C_DELAY * 5);
-
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- while ((status & 0xff) != 0x50) {
- udelay(I2C_DELAY);
- if (count > 2) {
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
- return 0;
- }
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- }
- GT_REG_READ(I2C_DATA, &data);
- len--;
- *return_data = (uchar)data;
- return_data++;
- }
- RESET_REG_BITS(I2C_CONTROL, BIT2|BIT3);
- while ((status & 0xff) != 0x58) {
- udelay(I2C_DELAY);
- if (count > 200) {
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
- return status;
- }
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- }
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /* stop */
-
- return 0;
-}
-
-static uchar
-i2c_write_data(unsigned int data, int len)
-{
- unsigned int status;
- int count = 0;
-
- DP(puts("i2c_write_data\n"));
-
- if (len > 4)
- return -1;
-
- while (len) {
- /* Set and assert the data */
-
- GT_REG_WRITE(I2C_DATA, (unsigned int)data);
- RESET_REG_BITS(I2C_CONTROL, (0x1 << 3));
-
- udelay(I2C_DELAY);
-
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- while ((status & 0xff) != 0x28) {
- udelay(I2C_DELAY);
- if (count > 20) {
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
- return status;
- }
- GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
- count++;
- }
- len--;
- }
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 3) | (0x1 << 4));
- GT_REG_WRITE(I2C_CONTROL, (0x1 << 4));
-
- udelay(I2C_DELAY * 10);
-
- return 0;
-}
-
-static uchar
-i2c_set_dev_offset(uchar dev_addr, unsigned int offset, int ten_bit)
-{
- uchar status;
-
- DP(puts("i2c_set_dev_offset\n"));
-
- status = i2c_select_device(dev_addr, 0, ten_bit);
- if (status) {
-#ifdef DEBUG_I2C
- printf("Failed to select device setting offset: 0x%02x\n",
- status);
-#endif
- return status;
- }
-
- status = i2c_write_data(offset, 1);
- if (status) {
-#ifdef DEBUG_I2C
- printf("Failed to write data: 0x%02x\n", status);
-#endif
- return status;
- }
-
- return 0;
-}
-
-uchar
-i2c_read(uchar dev_addr, unsigned int offset, int len, uchar *data,
- int ten_bit)
-{
- uchar status = 0;
- unsigned int i2cfreq = 400000;
-
- DP(puts("i2c_read\n"));
-
- i2c_init(i2cfreq, 0);
-
- status = i2c_start();
-
- if (status) {
-#ifdef DEBUG_I2C
- printf("Transaction start failed: 0x%02x\n", status);
-#endif
- return status;
- }
-
- status = i2c_set_dev_offset(dev_addr, 0, 0);
- if (status) {
-#ifdef DEBUG_I2C
- printf("Failed to set offset: 0x%02x\n", status);
-#endif
- return status;
- }
-
- i2c_init(i2cfreq, 0);
-
- status = i2c_start();
- if (status) {
-#ifdef DEBUG_I2C
- printf("Transaction restart failed: 0x%02x\n", status);
-#endif
- return status;
- }
-
- status = i2c_select_device(dev_addr, 1, ten_bit);
- if (status) {
-#ifdef DEBUG_I2C
- printf("Address not acknowledged: 0x%02x\n", status);
-#endif
- return status;
- }
-
- status = i2c_get_data(data, len);
- if (status) {
-#ifdef DEBUG_I2C
- printf("Data not received: 0x%02x\n", status);
-#endif
- return status;
- }
-
- return 0;
-}
+++ /dev/null
-#ifndef __I2C_H__
-#define __I2C_H__
-
-/* function declarations */
-uchar i2c_read(uchar, unsigned int, int, uchar*, int);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <galileo/gt64260R.h>
-#include <galileo/memory.h>
-#include "intel_flash.h"
-
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-static void
-bank_reset(flash_info_t *info, int sect)
-{
- bank_addr_t addrw, eaddrw;
-
- addrw = (bank_addr_t)info->start[sect];
- eaddrw = BANK_ADDR_NEXT_WORD(addrw);
-
- while (addrw < eaddrw) {
-#ifdef FLASH_DEBUG
- printf(" writing reset cmd to addr 0x%08lx\n",
- (unsigned long)addrw);
-#endif
- *addrw = BANK_CMD_RST;
- addrw++;
- }
-}
-
-static void
-bank_erase_init(flash_info_t *info, int sect)
-{
- bank_addr_t addrw, saddrw, eaddrw;
- int flag;
-
-#ifdef FLASH_DEBUG
- printf("0x%08x BANK_CMD_PROG\n", BANK_CMD_PROG);
- printf("0x%08x BANK_CMD_ERASE1\n", BANK_CMD_ERASE1);
- printf("0x%08x BANK_CMD_ERASE2\n", BANK_CMD_ERASE2);
- printf("0x%08x BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT);
- printf("0x%08x BANK_CMD_RST\n", BANK_CMD_RST);
- printf("0x%08x BANK_STAT_RDY\n", BANK_STAT_RDY);
- printf("0x%08x BANK_STAT_ERR\n", BANK_STAT_ERR);
-#endif
-
- saddrw = (bank_addr_t)info->start[sect];
- eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
-
-#ifdef FLASH_DEBUG
- printf("erasing sector %d, start addr = 0x%08lx "
- "(bank next word addr = 0x%08lx)\n", sect,
- (unsigned long)saddrw, (unsigned long)eaddrw);
-#endif
-
- /* Disable intrs which might cause a timeout here */
- flag = disable_interrupts();
-
- for (addrw = saddrw; addrw < eaddrw; addrw++) {
-#ifdef FLASH_DEBUG
- printf(" writing erase cmd to addr 0x%08lx\n",
- (unsigned long)addrw);
-#endif
- *addrw = BANK_CMD_ERASE1;
- *addrw = BANK_CMD_ERASE2;
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-}
-
-static int
-bank_erase_poll(flash_info_t *info, int sect)
-{
- bank_addr_t addrw, saddrw, eaddrw;
- int sectdone, haderr;
-
- saddrw = (bank_addr_t)info->start[sect];
- eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
-
- sectdone = 1;
- haderr = 0;
-
- for (addrw = saddrw; addrw < eaddrw; addrw++) {
- bank_word_t stat = *addrw;
-
-#ifdef FLASH_DEBUG
- printf(" checking status at addr "
- "0x%08x [0x%08x]\n",
- (unsigned long)addrw, stat);
-#endif
- if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY)
- sectdone = 0;
- else if ((stat & BANK_STAT_ERR) != 0) {
- printf(" failed on sector %d "
- "(stat = 0x%08x) at "
- "address 0x%p\n",
- sect, stat, addrw);
- *addrw = BANK_CMD_CLR_STAT;
- haderr = 1;
- }
- }
-
- if (haderr)
- return (-1);
- else
- return (sectdone);
-}
-
-int
-write_word_intel(bank_addr_t addr, bank_word_t value)
-{
- bank_word_t stat;
- ulong start;
- int flag, retval;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = BANK_CMD_PROG;
-
- *addr = value;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- retval = 0;
-
- /* data polling for D7 */
- start = get_timer (0);
- do {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- retval = 1;
- goto done;
- }
- stat = *addr;
- } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
-
- if ((stat & BANK_STAT_ERR) != 0) {
- printf("flash program failed (stat = 0x%08lx) "
- "at address 0x%08lx\n", (ulong)stat, (ulong)addr);
- *addr = BANK_CMD_CLR_STAT;
- retval = 3;
- }
-
-done:
- /* reset to read mode */
- *addr = BANK_CMD_RST;
-
- return (retval);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase_intel(flash_info_t *info, int s_first, int s_last)
-{
- int prot, sect, haderr;
- ulong start, now, last;
-
-#ifdef FLASH_DEBUG
- printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
- " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
- (info - flash_info) + 1);
- flash_print_info(info);
-#endif
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sector%s will not be erased!\n",
- prot, (prot > 1 ? "s" : ""));
- }
-
- start = get_timer (0);
- last = 0;
- haderr = 0;
-
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- ulong estart;
- int sectdone;
-
- bank_erase_init(info, sect);
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- estart = get_timer(start);
-
- do {
- now = get_timer(start);
-
- if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout (sect %d)\n", sect);
- haderr = 1;
- break;
- }
-
-#ifndef FLASH_DEBUG
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
-#endif
-
- sectdone = bank_erase_poll(info, sect);
-
- if (sectdone < 0) {
- haderr = 1;
- break;
- }
-
- } while (!sectdone);
-
- if (haderr)
- break;
- }
- }
-
- if (haderr > 0)
- printf (" failed\n");
- else
- printf (" done\n");
-
- /* reset to read mode */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- bank_reset(info, sect);
- }
- }
- return haderr;
-}
+++ /dev/null
-/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
-
-/*
- * acceptable chips types are:
- *
- * 28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
- */
-
-/* register addresses, valid only following an CHIP_CMD_RD_ID command */
-#define CHIP_ADDR_REG_MAN 0x000000 /* manufacturer's id */
-#define CHIP_ADDR_REG_DEV 0x000001 /* device id */
-#define CHIP_ADDR_REG_CFGM 0x000003 /* master lock config */
-#define CHIP_ADDR_REG_CFG(b) (((b)<<16)|2) /* lock config for block b */
-
-/* Commands */
-#define CHIP_CMD_RST 0xFF /* reset flash */
-#define CHIP_CMD_RD_ID 0x90 /* read the id and lock bits */
-#define CHIP_CMD_RD_QUERY 0x98 /* read device capabilities */
-#define CHIP_CMD_RD_STAT 0x70 /* read the status register */
-#define CHIP_CMD_CLR_STAT 0x50 /* clear the staus register */
-#define CHIP_CMD_WR_BUF 0xE8 /* clear the staus register */
-#define CHIP_CMD_PROG 0x40 /* program word command */
-#define CHIP_CMD_ERASE1 0x20 /* 1st word for block erase */
-#define CHIP_CMD_ERASE2 0xD0 /* 2nd word for block erase */
-#define CHIP_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
-#define CHIP_CMD_LOCK 0x60 /* 1st word for all lock cmds */
-#define CHIP_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
-#define CHIP_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
-#define CHIP_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
-
-/* status register bits */
-#define CHIP_STAT_DPS 0x02 /* Device Protect Status */
-#define CHIP_STAT_VPPS 0x08 /* VPP Status */
-#define CHIP_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
-#define CHIP_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
-#define CHIP_STAT_ESS 0x40 /* Erase Suspend Status */
-#define CHIP_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
-
-#define CHIP_STAT_ERR (CHIP_STAT_VPPS | CHIP_STAT_DPS | \
- CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)
-
-/* ID and Lock Configuration */
-#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
-#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID
-
-/* dimensions */
-#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
-#define CHIP_WSHIFT 1 /* (log2 of CHIP_WIDTH) */
-#define CHIP_NBLOCKS 128
-#define CHIP_BLKSZ (128 * 1024) /* of 128Kbytes each */
-#define CHIP_SIZE (CHIP_BLKSZ * CHIP_NBLOCKS)
-
-/********************** DEFINES for Hymod Flash ******************************/
-
-/*
- * The hymod board has 2 x 28F320J5 chips running in
- * 16 bit mode, for a 32 bit wide bank.
- */
-
-typedef unsigned short bank_word_t; /* 8/16/32/64bit unsigned int */
-typedef volatile bank_word_t *bank_addr_t;
-typedef unsigned long bank_size_t; /* want this big - >= 32 bit */
-
-#define BANK_CHIP_WIDTH 1 /* each bank is 1 chip wide */
-#define BANK_CHIP_WSHIFT 0 /* (log2 of BANK_CHIP_WIDTH) */
-
-#define BANK_WIDTH (CHIP_WIDTH * BANK_CHIP_WIDTH)
-#define BANK_WSHIFT (CHIP_WSHIFT + BANK_CHIP_WSHIFT)
-#define BANK_NBLOCKS CHIP_NBLOCKS
-#define BANK_BLKSZ (CHIP_BLKSZ * BANK_CHIP_WIDTH)
-#define BANK_SIZE (CHIP_SIZE * BANK_CHIP_WIDTH)
-
-#define MAX_BANKS 1 /* only one bank possible */
-
-/* align bank addresses and sizes to bank word boundaries */
-#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_WIDTH - 1)))
-#define BANK_SIZE_WORD_ALIGN(s) ((bank_size_t)BANK_ADDR_WORD_ALIGN( \
- (bank_size_t)(s) + (BANK_WIDTH - 1)))
-
-/* align bank addresses and sizes to bank block boundaries */
-#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_BLKSZ - 1)))
-#define BANK_SIZE_BLK_ALIGN(s) ((bank_size_t)BANK_ADDR_BLK_ALIGN( \
- (bank_size_t)(s) + (BANK_BLKSZ - 1)))
-
-/* align bank addresses and sizes to bank boundaries */
-#define BANK_ADDR_BANK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_SIZE - 1)))
-#define BANK_SIZE_BANK_ALIGN(s) ((bank_size_t)BANK_ADDR_BANK_ALIGN( \
- (bank_size_t)(s) + (BANK_SIZE - 1)))
-
-/* add an offset to a bank address */
-#define BANK_ADDR_OFFSET(a, o) (bank_addr_t)((bank_size_t)(a) + \
- (bank_size_t)(o))
-
-/* get base address of bank b, given flash base address a */
-#define BANK_ADDR_BASE(a, b) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- (bank_size_t)(b) * BANK_SIZE)
-
-/* adjust a bank address to start of next word, block or bank */
-#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
- BANK_WIDTH)
-#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
- BANK_BLKSZ)
-#define BANK_ADDR_NEXT_BANK(a) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- BANK_SIZE)
-
-/* get bank address of chip register r given a bank base address a */
-#define BANK_ADDR_REG(a, r) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- ((bank_size_t)(r) << BANK_WSHIFT))
-
-/* make a bank address for each chip register address */
-
-#define BANK_ADDR_REG_MAN(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
-#define BANK_ADDR_REG_DEV(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
-#define BANK_ADDR_REG_CFGM(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
-#define BANK_ADDR_REG_CFG(b,a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))
-
-/*
- * replicate a chip cmd/stat/rd value into each byte position within a word
- * so that multiple chips are accessed in a single word i/o operation
- *
- * this must be as wide as the bank_word_t type, and take into account the
- * chip width and bank layout
- */
-
-#define BANK_FILL_WORD(o) ((bank_word_t)(o))
-
-/* make a bank word value for each chip cmd/stat/rd value */
-
-/* Commands */
-#define BANK_CMD_RST BANK_FILL_WORD(CHIP_CMD_RST)
-#define BANK_CMD_RD_ID BANK_FILL_WORD(CHIP_CMD_RD_ID)
-#define BANK_CMD_RD_STAT BANK_FILL_WORD(CHIP_CMD_RD_STAT)
-#define BANK_CMD_CLR_STAT BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
-#define BANK_CMD_ERASE1 BANK_FILL_WORD(CHIP_CMD_ERASE1)
-#define BANK_CMD_ERASE2 BANK_FILL_WORD(CHIP_CMD_ERASE2)
-#define BANK_CMD_PROG BANK_FILL_WORD(CHIP_CMD_PROG)
-#define BANK_CMD_LOCK BANK_FILL_WORD(CHIP_CMD_LOCK)
-#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
-#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
-#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)
-
-/* status register bits */
-#define BANK_STAT_DPS BANK_FILL_WORD(CHIP_STAT_DPS)
-#define BANK_STAT_PSS BANK_FILL_WORD(CHIP_STAT_PSS)
-#define BANK_STAT_VPPS BANK_FILL_WORD(CHIP_STAT_VPPS)
-#define BANK_STAT_PSLBS BANK_FILL_WORD(CHIP_STAT_PSLBS)
-#define BANK_STAT_ECLBS BANK_FILL_WORD(CHIP_STAT_ECLBS)
-#define BANK_STAT_ESS BANK_FILL_WORD(CHIP_STAT_ESS)
-#define BANK_STAT_RDY BANK_FILL_WORD(CHIP_STAT_RDY)
-
-#define BANK_STAT_ERR BANK_FILL_WORD(CHIP_STAT_ERR)
-
-/* ID and Lock Configuration */
-#define BANK_RD_ID_LOCK BANK_FILL_WORD(CHIP_RD_ID_LOCK)
-#define BANK_RD_ID_MAN BANK_FILL_WORD(CHIP_RD_ID_MAN)
-#define BANK_RD_ID_DEV BANK_FILL_WORD(CHIP_RD_ID_DEV)
+++ /dev/null
-/*
- * include/local.h - local configuration options, board specific
- */
-
-#ifndef __LOCAL_H
-#define __LOCAL_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* This tells U-Boot that the config options are compiled in */
-/* #undef ENV_IS_EMBEDDED */
-/* Don't touch this! U-Boot figures this out based on other
- * magic. */
-
-/* Uncomment and define any of the below options */
-
-/* #define CONFIG_750CX */ /* The 750CX doesn't support as many things in L2CR */
- /* Note: If you defined CONFIG_EVB64260_750CX this */
- /* gets defined automatically. */
-
-/* These want string arguments */
-/* #define CONFIG_BOOTARGS */
-/* #define CONFIG_BOOTCOMMAND */
-/* #define CONFIG_RAMBOOTCOMMAND */
-/* #define CONFIG_NFSBOOTCOMMAND */
-/* #define CONFIG_SYS_AUTOLOAD */
-/* #define CONFIG_PREBOOT */
-
-/* These don't */
-
-/* #define CONFIG_BOOTDELAY */
-/* #define CONFIG_BAUDRATE */
-/* #define CONFIG_LOADS_ECHO */
-/* #define CONFIG_ETHADDR */
-/* #define CONFIG_ETH2ADDR */
-/* #define CONFIG_ETH3ADDR */
-/* #define CONFIG_IPADDR */
-/* #define CONFIG_SERVERIP */
-/* #define CONFIG_ROOTPATH */
-/* #define CONFIG_GATEWAYIP */
-/* #define CONFIG_NETMASK */
-/* #define CONFIG_HOSTNAME */
-/* #define CONFIG_BOOTFILE */
-/* #define CONFIG_LOADADDR */
-
-/* these hardware addresses are pretty bogus, please change them to
- suit your needs */
-
-/* first ethernet */
-#define CONFIG_ETHADDR 00:11:22:33:44:55
-
-/* next two ethernet hwaddrs */
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:11:22:33:44:66
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:11:22:33:44:77
-
-#define CONFIG_ENV_OVERWRITE
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Memory.c - Memory mappings and remapping functions */
-
-/* Copyright - Galileo technology. */
-
-/* modified by Josh Huber to clean some things up, and
- * fit it into the U-Boot framework */
-
-#include <galileo/core.h>
-#include <galileo/memory.h>
-
-/********************************************************************
-* memoryGetBankBaseAddress - Gets the base address of a memory bank
-* - If the memory bank size is 0 then this base address has no meaning!!!
-*
-*
-* INPUTS: MEMORY_BANK bank - The bank we ask for its base Address.
-* OUTPUT: N/A
-* RETURNS: Memory bank base address.
-*********************************************************************/
-static unsigned long memoryGetBankRegOffset(MEMORY_BANK bank)
-{
- switch (bank)
- {
- case BANK0:
- return SCS_0_LOW_DECODE_ADDRESS;
- case BANK1:
- return SCS_1_LOW_DECODE_ADDRESS;
- case BANK2:
- return SCS_2_LOW_DECODE_ADDRESS;
- case BANK3:
- return SCS_3_LOW_DECODE_ADDRESS;
- }
- return SCS_0_LOW_DECODE_ADDRESS; /* default value */
-}
-
-unsigned int memoryGetBankBaseAddress(MEMORY_BANK bank)
-{
- unsigned int base;
- unsigned int regOffset=memoryGetBankRegOffset(bank);
-
- GT_REG_READ(regOffset,&base);
- base = base << 20;
- return base;
-}
-
-/********************************************************************
-* memoryGetDeviceBaseAddress - Gets the base address of a device.
-* - If the device size is 0 then this base address has no meaning!!!
-*
-*
-* INPUT: DEVICE device - The device we ask for its base address.
-* OUTPUT: N/A
-* RETURNS: Device base address.
-*********************************************************************/
-static unsigned int memoryGetDeviceRegOffset(DEVICE device)
-{
- switch (device)
- {
- case DEVICE0:
- return CS_0_LOW_DECODE_ADDRESS;
- case DEVICE1:
- return CS_1_LOW_DECODE_ADDRESS;
- case DEVICE2:
- return CS_2_LOW_DECODE_ADDRESS;
- case DEVICE3:
- return CS_3_LOW_DECODE_ADDRESS;
- case BOOT_DEVICE:
- return BOOTCS_LOW_DECODE_ADDRESS;
- }
- return CS_0_LOW_DECODE_ADDRESS; /* default value */
-}
-
-unsigned int memoryGetDeviceBaseAddress(DEVICE device)
-{
- unsigned int regBase;
- unsigned int regEnd;
- unsigned int regOffset=memoryGetDeviceRegOffset(device);
-
- GT_REG_READ(regOffset, ®Base);
- GT_REG_READ(regOffset+8, ®End);
-
- if(regEnd<=regBase) return 0xffffffff; /* ERROR !!! */
-
- regBase = regBase << 20;
- return regBase;
-}
-
-/********************************************************************
-* memoryGetBankSize - Returns the size of a memory bank.
-*
-*
-* INPUT: MEMORY_BANK bank - The bank we ask for its size.
-* OUTPUT: N/A
-* RETURNS: Memory bank size.
-*********************************************************************/
-unsigned int memoryGetBankSize(MEMORY_BANK bank)
-{
- unsigned int size,base;
- unsigned int highValue;
- unsigned int highAddress=memoryGetBankRegOffset(bank)+8;
-
- base = memoryGetBankBaseAddress(bank);
- GT_REG_READ(highAddress,&highValue);
- highValue = (highValue + 1) << 20;
- if(base > highValue)
- size=0;
- else
- size = highValue - base;
- return size;
-}
-
-/********************************************************************
-* memoryGetDeviceSize - Returns the size of a device memory space
-*
-*
-* INPUT: DEVICE device - The device we ask for its base address.
-* OUTPUT: N/A
-* RETURNS: Size of a device memory space.
-*********************************************************************/
-unsigned int memoryGetDeviceSize(DEVICE device)
-{
- unsigned int size,base;
- unsigned int highValue;
- unsigned int highAddress=memoryGetDeviceRegOffset(device)+8;
-
- base = memoryGetDeviceBaseAddress(device);
- GT_REG_READ(highAddress,&highValue);
- if (highValue == 0xfff)
- {
- size = (~base) + 1; /* what the heck is this? */
- return size;
- }
- else
- highValue = (highValue + 1) << 20;
-
- if(base > highValue)
- size=0;
- else
- size = highValue - base;
- return size;
-}
-
-/********************************************************************
-* memoryGetDeviceWidth - A device can be with: 1,2,4 or 8 Bytes data width.
-* The width is determine in registers: 'Device Parameters'
-* registers (0x45c, 0x460, 0x464, 0x468, 0x46c - for each device.
-* at bits: [21:20].
-*
-* INPUT: DEVICE device - Device number
-* OUTPUT: N/A
-* RETURNS: Device width in Bytes (1,2,4 or 8), 0 if error had occurred.
-*********************************************************************/
-unsigned int memoryGetDeviceWidth(DEVICE device)
-{
- unsigned int width;
- unsigned int regValue;
-
- GT_REG_READ(DEVICE_BANK0PARAMETERS + device*4,®Value);
- width = (regValue & 0x00300000) >> 20;
- switch (width)
- {
- case 0:
- return 1;
- case 1:
- return 2;
- case 2:
- return 4;
- case 3:
- return 8;
- default:
- return 0;
- }
-}
-
-bool memoryMapBank(MEMORY_BANK bank, unsigned int bankBase,unsigned int bankLength)
-{
- unsigned int low=0xfff;
- unsigned int high=0x0;
- unsigned int regOffset=memoryGetBankRegOffset(bank);
-
- if(bankLength!=0) {
- low = (bankBase >> 20) & 0xffff;
- high=((bankBase+bankLength)>>20)-1;
- }
-
-#ifdef DEBUG
- {
- unsigned int oldLow, oldHigh;
- GT_REG_READ(regOffset,&oldLow);
- GT_REG_READ(regOffset+8,&oldHigh);
-
- printf("b%d %x-%x->%x-%x\n", bank, oldLow, oldHigh, low, high);
- }
-#endif
-
- GT_REG_WRITE(regOffset,low);
- GT_REG_WRITE(regOffset+8,high);
-
- return true;
-}
-bool memoryMapDeviceSpace(DEVICE device, unsigned int deviceBase,unsigned int deviceLength)
-{
- /* TODO: what are appropriate "unmapped" values? */
- unsigned int low=0xfff;
- unsigned int high=0x0;
- unsigned int regOffset=memoryGetDeviceRegOffset(device);
-
- if(deviceLength != 0) {
- low=deviceBase>>20;
- high=((deviceBase+deviceLength)>>20)-1;
- } else {
- /* big problems in here... */
- /* this will HANG */
- }
-
- GT_REG_WRITE(regOffset,low);
- GT_REG_WRITE(regOffset+8,high);
-
- return true;
-}
-
-
-/********************************************************************
-* memoryMapInternalRegistersSpace - Sets new base address for the internals
-* registers.
-*
-* INPUTS: unsigned int internalRegBase - The new base address.
-* RETURNS: true on success, false on failure
-*********************************************************************/
-bool memoryMapInternalRegistersSpace(unsigned int internalRegBase)
-{
- unsigned int currentValue;
- unsigned int internalValue = internalRegBase;
-
- internalRegBase = (internalRegBase >> 20);
- GT_REG_READ(INTERNAL_SPACE_DECODE,¤tValue);
- internalRegBase = (currentValue & 0xffff0000) | internalRegBase;
- GT_REG_WRITE(INTERNAL_SPACE_DECODE,internalRegBase);
- INTERNAL_REG_BASE_ADDR = internalValue;
- return true;
-}
-
-/********************************************************************
-* memoryGetInternalRegistersSpace - Gets internal registers Base Address.
-*
-* INPUTS: unsigned int internalRegBase - The new base address.
-* RETURNS: true on success, false on failure
-*********************************************************************/
-unsigned int memoryGetInternalRegistersSpace(void)
-{
- return INTERNAL_REG_BASE_ADDR;
-}
-
-/********************************************************************
-* memorySetProtectRegion - This function modifys one of the 8 regions with
-* one of the three protection mode.
-* - Be advised to check the spec before modifying them.
-*
-*
-* Inputs: CPU_PROTECT_REGION - one of the eight regions.
-* CPU_ACCESS - general access.
-* CPU_WRITE - read only access.
-* CPU_CACHE_PROTECT - chache access.
-* we defining CPU because there is another protect from the pci SIDE.
-* Returns: false if one of the parameters is wrong and true else
-*********************************************************************/
-bool memorySetProtectRegion(MEMORY_PROTECT_REGION region,
- MEMORY_ACCESS memAccess,
- MEMORY_ACCESS_WRITE memWrite,
- MEMORY_CACHE_PROTECT cacheProtection,
- unsigned int baseAddress,
- unsigned int regionLength)
-{
- unsigned int protectHigh = baseAddress + regionLength;
-
- if(regionLength == 0) /* closing the region */
- {
- GT_REG_WRITE(CPU_LOW_PROTECT_ADDRESS_0 + 0x10*region,0x0000ffff);
- GT_REG_WRITE(CPU_HIGH_PROTECT_ADDRESS_0 + 0x10*region,0);
- return true;
- }
- baseAddress = (baseAddress & 0xfff00000) >> 20;
- baseAddress = baseAddress | memAccess << 16 | memWrite << 17
- | cacheProtection << 18;
- GT_REG_WRITE(CPU_LOW_PROTECT_ADDRESS_0 + 0x10*region,baseAddress);
- protectHigh = (protectHigh & 0xfff00000) >> 20;
- GT_REG_WRITE(CPU_HIGH_PROTECT_ADDRESS_0 + 0x10*region,protectHigh - 1);
- return true;
-}
-
-/********************************************************************
-* memorySetRegionSnoopMode - This function modifys one of the 4 regions which
-* supports Cache Coherency.
-*
-*
-* Inputs: SNOOP_REGION region - One of the four regions.
-* SNOOP_TYPE snoopType - There is four optional Types:
-* 1. No Snoop.
-* 2. Snoop to WT region.
-* 3. Snoop to WB region.
-* 4. Snoop & Invalidate to WB region.
-* unsigned int baseAddress - Base Address of this region.
-* unsigned int topAddress - Top Address of this region.
-* Returns: false if one of the parameters is wrong and true else
-*********************************************************************/
-bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region,
- MEMORY_SNOOP_TYPE snoopType,
- unsigned int baseAddress,
- unsigned int regionLength)
-{
- unsigned int snoopXbaseAddress;
- unsigned int snoopXtopAddress;
- unsigned int data;
- unsigned int snoopHigh = baseAddress + regionLength;
-
- if( (region > MEM_SNOOP_REGION3) || (snoopType > MEM_SNOOP_WB) )
- return false;
- snoopXbaseAddress = SNOOP_BASE_ADDRESS_0 + 0x10 * region;
- snoopXtopAddress = SNOOP_TOP_ADDRESS_0 + 0x10 * region;
- if(regionLength == 0) /* closing the region */
- {
- GT_REG_WRITE(snoopXbaseAddress,0x0000ffff);
- GT_REG_WRITE(snoopXtopAddress,0);
- return true;
- }
- baseAddress = baseAddress & 0xffff0000;
- data = (baseAddress >> 16) | snoopType << 16;
- GT_REG_WRITE(snoopXbaseAddress,data);
- snoopHigh = (snoopHigh & 0xfff00000) >> 20;
- GT_REG_WRITE(snoopXtopAddress,snoopHigh - 1);
- return true;
-}
-
-/********************************************************************
-* memoryRemapAddress - This fubction used for address remapping.
-*
-*
-* Inputs: regOffset: remap register
-* remapValue :
-* Returns: false if one of the parameters is erroneous,true otherwise.
-*********************************************************************/
-bool memoryRemapAddress(unsigned int remapReg, unsigned int remapValue)
-{
- unsigned int valueForReg;
- valueForReg = (remapValue & 0xfff00000) >> 20;
- GT_REG_WRITE(remapReg, valueForReg);
- return true;
-}
-
-/********************************************************************
-* memoryGetDeviceParam - This function used for getting device parameters from
-* DEVICE BANK PARAMETERS REGISTER
-*
-*
-* Inputs: - deviceParam: STRUCT with paramiters for DEVICE BANK
-* PARAMETERS REGISTER
-* - deviceNum : number of device
-* Returns: false if one of the parameters is erroneous,true otherwise.
-*********************************************************************/
-bool memoryGetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum)
-{
- unsigned int valueOfReg;
- unsigned int calcData;
-
- GT_REG_READ(DEVICE_BANK0PARAMETERS + 4 * deviceNum, &valueOfReg);
- calcData = (0x7 & valueOfReg) + ((0x400000 & valueOfReg) >> 19);
- deviceParam -> turnOff = calcData; /* Turn Off */
-
- calcData = ((0x78 & valueOfReg) >> 3) + ((0x800000 & valueOfReg) >> 19);
- deviceParam -> acc2First = calcData; /* Access To First */
-
- calcData = ((0x780 & valueOfReg) >> 7) + ((0x1000000 & valueOfReg) >> 20);
- deviceParam -> acc2Next = calcData; /* Access To Next */
-
- calcData = ((0x3800 & valueOfReg) >> 11) + ((0x2000000 & valueOfReg) >> 22);
- deviceParam -> ale2Wr = calcData; /* Ale To Write */
-
- calcData = ((0x1c000 & valueOfReg) >> 14) + ((0x4000000 & valueOfReg) >> 23);
- deviceParam -> wrLow = calcData; /* Write Active */
-
- calcData = ((0xe0000 & valueOfReg) >> 17) + ((0x8000000 & valueOfReg) >> 24);
- deviceParam -> wrHigh = calcData; /* Write High */
-
- calcData = ((0x300000 & valueOfReg) >> 20);
- switch (calcData)
- {
- case 0:
- deviceParam -> deviceWidth = 1; /* one Byte - 8-bit */
- break;
- case 1:
- deviceParam -> deviceWidth = 2; /* two Bytes - 16-bit */
- break;
- case 2:
- deviceParam -> deviceWidth = 4; /* four Bytes - 32-bit */
- break;
- case 3:
- deviceParam -> deviceWidth = 8; /* eight Bytes - 64-bit */
- break;
- default:
- deviceParam -> deviceWidth = 1;
- break;
- }
- return true;
-}
-
-/********************************************************************
-* memorySetDeviceParam - This function used for setting device parameters to
-* DEVICE BANK PARAMETERS REGISTER
-*
-*
-* Inputs: - deviceParam: STRUCT for store paramiters from DEVICE BANK
-* PARAMETERS REGISTER
-* - deviceNum : number of device
-* Returns: false if one of the parameters is erroneous,true otherwise.
-*********************************************************************/
-bool memorySetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum)
-{
- unsigned int valueForReg;
-
- if((deviceParam -> turnOff >= 0xf) || (deviceParam -> acc2First >= 0x1f) ||
- (deviceParam -> acc2Next >= 0x1f) || (deviceParam -> ale2Wr >= 0xf) ||
- (deviceParam -> wrLow >= 0xf) || (deviceParam -> wrHigh >= 0xf))
- return false;
- valueForReg = (((deviceParam -> turnOff) & 0x7) |
- (((deviceParam -> turnOff) & 0x8) << 19) |
- (((deviceParam -> acc2First) & 0xf) << 3) |
- (((deviceParam -> acc2First) & 0x10) << 19) |
- (((deviceParam -> acc2Next) & 0xf) << 7) |
- (((deviceParam -> acc2Next) & 0x10) << 20) |
- (((deviceParam -> ale2Wr) & 0x7) << 11) |
- (((deviceParam -> ale2Wr) & 0xf) << 22) |
- (((deviceParam -> wrLow) & 0x7) << 14) |
- (((deviceParam -> wrLow) & 0xf) << 23) |
- (((deviceParam -> wrHigh) & 0x7) << 17) |
- (((deviceParam -> wrHigh) & 0xf) << 24));
- /* insert the device width: */
- switch(deviceParam->deviceWidth)
- {
- case 1:
- valueForReg = valueForReg | _8BIT;
- break;
- case 2:
- valueForReg = valueForReg | _16BIT;
- break;
- case 4:
- valueForReg = valueForReg | _32BIT;
- break;
- case 8:
- valueForReg = valueForReg | _64BIT;
- break;
- default:
- valueForReg = valueForReg | _8BIT;
- break;
- }
- GT_REG_WRITE(DEVICE_BANK0PARAMETERS + 4 * deviceNum, valueForReg);
- return true;
-}
+++ /dev/null
-#include <config.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#include <galileo/gt64260R.h>
-
-#ifdef CONFIG_ECC
- /* Galileo specific asm code for initializing ECC */
- .globl board_relocate_rom
-board_relocate_rom:
- mflr r7
- /* update the location of the GT registers */
- lis r11, CONFIG_SYS_GT_REGS@h
- /* if we're using ECC, we must use the DMA engine to copy ourselves */
- bl start_idma_transfer_0
- bl wait_for_idma_0
- bl stop_idma_engine_0
-
- mtlr r7
- blr
-
- .globl board_init_ecc
-board_init_ecc:
- mflr r7
- /* NOTE: r10 still contains the location we've been relocated to
- * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
-
- /* now that we're running from ram, init the rest of main memory
- * for ECC use */
- lis r8, CONFIG_SYS_MONITOR_LEN@h
- ori r8, r8, CONFIG_SYS_MONITOR_LEN@l
-
- divw r3, r10, r8
-
- /* set up the counter, and init the starting address */
- mtctr r3
- li r12, 0
-
- /* bytes per transfer */
- mr r5, r8
-about_to_init_ecc:
-1: mr r3, r12
- mr r4, r12
- bl start_idma_transfer_0
- bl wait_for_idma_0
- bl stop_idma_engine_0
- add r12, r12, r8
- bdnz 1b
-
- mtlr r7
- blr
-
- /* r3: dest addr
- * r4: source addr
- * r5: byte count
- * r11: gt regbase
- * trashes: r6, r5
- */
-start_idma_transfer_0:
- /* set the byte count, including the OWN bit */
- mr r6, r11
- ori r6, r6, CHANNEL0_DMA_BYTE_COUNT
- stwbrx r5, 0, (r6)
-
- /* set the source address */
- mr r6, r11
- ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
- stwbrx r4, 0, (r6)
-
- /* set the dest address */
- mr r6, r11
- ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
- stwbrx r3, 0, (r6)
-
- /* set the next record pointer */
- li r5, 0
- mr r6, r11
- ori r6, r6, CHANNEL0NEXT_RECORD_POINTER
- stwbrx r5, 0, (r6)
-
- /* set the low control register */
- /* bit 9 is NON chained mode, bit 31 is new style descriptors.
- bit 12 is channel enable */
- ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
- /* 15 shifted by 16 (oris) == bit 31 */
- oris r5, r5, (1 << 15)
- mr r6, r11
- ori r6, r6, CHANNEL0CONTROL
- stwbrx r5, 0, (r6)
-
- blr
-
- /* this waits for the bytecount to return to zero, indicating
- * that the trasfer is complete */
-wait_for_idma_0:
- mr r5, r11
- lis r6, 0xff
- ori r6, r6, 0xffff
- ori r5, r5, CHANNEL0_DMA_BYTE_COUNT
-1: lwbrx r4, 0, (r5)
- and. r4, r4, r6
- bne 1b
-
- blr
-
- /* this turns off channel 0 of the idma engine */
-stop_idma_engine_0:
- /* shut off the DMA engine */
- li r5, 0
- mr r6, r11
- ori r6, r6, CHANNEL0CONTROL
- stwbrx r5, 0, (r6)
-
- blr
-#endif
-
-#ifdef CONFIG_SYS_BOARD_ASM_INIT
- /* NOTE: trashes r3-r7 */
- .globl board_asm_init
-board_asm_init:
- /* just move the GT registers to where they belong */
- lis r3, CONFIG_SYS_DFL_GT_REGS@h
- ori r3, r3, CONFIG_SYS_DFL_GT_REGS@l
- lis r4, CONFIG_SYS_GT_REGS@h
- ori r4, r4, CONFIG_SYS_GT_REGS@l
- li r5, INTERNAL_SPACE_DECODE
-
- /* test to see if we've already moved */
- lwbrx r6, r5, r4
- andi. r6, r6, 0xffff
- rlwinm r7, r4, 12, 16, 31
- cmp cr0, r7, r6
- beqlr
-
- /* nope, have to move the registers */
- lwbrx r6, r5, r3
- andis. r6, r6, 0xffff
- or r6, r6, r7
- stwbrx r6, r5, r3
-
- /* now, poll for the change */
-1: lwbrx r7, r5, r4
- cmp cr0, r7, r6
- bne 1b
-
- /* done! */
- blr
-#endif
-
-/* For use of the debug LEDs */
- .global led_on0
-led_on0:
- xor r18, r18, r18
- lis r18, 0x1c80
- ori r18, r18, 0x8000
- stw r18, 0x0(r18)
- sync
- blr
-
- .global led_on1
-led_on1:
- xor r18, r18, r18
- lis r18, 0x1c80
- ori r18, r18, 0xc000
- stw r18, 0x0(r18)
- sync
- blr
-
- .global led_on2
-led_on2:
- xor r18, r18, r18
- lis r18, 0x1c81
- ori r18, r18, 0x0000
- stw r18, 0x0(r18)
- sync
- blr
+++ /dev/null
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * mpsc.c - driver for console over the MPSC.
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/cache.h>
-
-#include <malloc.h>
-#include "mpsc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int (*mpsc_putchar)(char ch) = mpsc_putchar_early;
-
-static volatile unsigned int *rx_desc_base=NULL;
-static unsigned int rx_desc_index=0;
-static volatile unsigned int *tx_desc_base=NULL;
-static unsigned int tx_desc_index=0;
-
-/* local function declarations */
-static int galmpsc_connect(int channel, int connect);
-static int galmpsc_route_serial(int channel, int connect);
-static int galmpsc_route_rx_clock(int channel, int brg);
-static int galmpsc_route_tx_clock(int channel, int brg);
-static int galmpsc_write_config_regs(int mpsc, int mode);
-static int galmpsc_config_channel_regs(int mpsc);
-static int galmpsc_set_char_length(int mpsc, int value);
-static int galmpsc_set_stop_bit_length(int mpsc, int value);
-static int galmpsc_set_parity(int mpsc, int value);
-static int galmpsc_enter_hunt(int mpsc);
-static int galmpsc_set_brkcnt(int mpsc, int value);
-static int galmpsc_set_tcschar(int mpsc, int value);
-static int galmpsc_set_snoop(int mpsc, int value);
-static int galmpsc_shutdown(int mpsc);
-
-static int galsdma_set_RFT(int channel);
-static int galsdma_set_SFM(int channel);
-static int galsdma_set_rxle(int channel);
-static int galsdma_set_txle(int channel);
-static int galsdma_set_burstsize(int channel, unsigned int value);
-static int galsdma_set_RC(int channel, unsigned int value);
-
-static int galbrg_set_CDV(int channel, int value);
-static int galbrg_enable(int channel);
-static int galbrg_disable(int channel);
-static int galbrg_set_clksrc(int channel, int value);
-static int galbrg_set_CUV(int channel, int value);
-
-static void galsdma_enable_rx(void);
-
-/* static int galbrg_reset(int channel); */
-
-#define SOFTWARE_CACHE_MANAGEMENT
-
-#ifdef SOFTWARE_CACHE_MANAGEMENT
-#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
-#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
-#else
-#define FLUSH_DCACHE(a,b)
-#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
-#define INVALIDATE_DCACHE(a,b)
-#endif
-
-
-/* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */
-#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->arch.mirror_hack[0]))
-
-#define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);}
-#define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M)
-
-#define GT_REG_WRITE_MIRROR(a,i,g,d) {MIRROR_HACK->a ## _M[i] = d; GT_REG_WRITE(a + (i*g),d);}
-#define GTREGREAD_MIRROR(a,i,g) (MIRROR_HACK->a ## _M[i])
-
-/* make sure this isn't bigger than 16 long words (u-boot.h) */
-struct _tag_mirror_hack {
- unsigned GALMPSC_PROTOCONF_REG_M[2]; /* 8008 */
- unsigned GALMPSC_CHANNELREG_1_M[2]; /* 800c */
- unsigned GALMPSC_CHANNELREG_2_M[2]; /* 8010 */
- unsigned GALBRG_0_CONFREG_M[2]; /* b200 */
-
- unsigned GALMPSC_ROUTING_REGISTER_M; /* b400 */
- unsigned GALMPSC_RxC_ROUTE_M; /* b404 */
- unsigned GALMPSC_TxC_ROUTE_M; /* b408 */
-
- unsigned int baudrate; /* current baudrate, for tsc delay calc */
-};
-
-/* static struct _tag_mirror_hack *mh = NULL; */
-
-/* special function for running out of flash. doesn't modify any
- * global variables [josh] */
-int
-mpsc_putchar_early(char ch)
-{
- int mpsc=CHANNEL;
- int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
- galmpsc_set_tcschar(mpsc,ch);
- GT_REG_WRITE(GALMPSC_CHANNELREG_2+(mpsc*GALMPSC_REG_GAP), temp|0x200);
-
-#define MAGIC_FACTOR (10*1000000)
-
- udelay(MAGIC_FACTOR / MIRROR_HACK->baudrate);
- return 0;
-}
-
-/* This is used after relocation, see serial.c and mpsc_init2 */
-static int
-mpsc_putchar_sdma(char ch)
-{
- volatile unsigned int *p;
- unsigned int temp;
-
-
- /* align the descriptor */
- p = tx_desc_base;
- memset((void *)p, 0, 8 * sizeof(unsigned int));
-
- /* fill one 64 bit buffer */
- /* word swap, pad with 0 */
- p[4] = 0; /* x */
- p[5] = (unsigned int)ch; /* x */
-
- /* CHANGED completely according to GT64260A dox - NTL */
- p[0] = 0x00010001; /* 0 */
- p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; /* 4 */
- p[2] = 0; /* 8 */
- p[3] = (unsigned int)&p[4]; /* c */
-
-#if 0
- p[9] = DESC_FIRST | DESC_LAST;
- p[10] = (unsigned int)&p[0];
- p[11] = (unsigned int)&p[12];
-#endif
-
- FLUSH_DCACHE(&p[0], &p[8]);
-
- GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
- (unsigned int)&p[0]);
- GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
- (unsigned int)&p[0]);
-
- temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
- temp |= (TX_DEMAND | TX_STOP);
- GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
-
- INVALIDATE_DCACHE(&p[1], &p[2]);
-
- while(p[1] & DESC_OWNER) {
- udelay(100);
- INVALIDATE_DCACHE(&p[1], &p[2]);
- }
-
- return 0;
-}
-
-char mpsc_getchar (void)
-{
- static unsigned int done = 0;
- volatile char ch;
- unsigned int len = 0, idx = 0, temp;
-
- volatile unsigned int *p;
-
-
- do {
- p = &rx_desc_base[rx_desc_index * 8];
-
- INVALIDATE_DCACHE (&p[0], &p[1]);
- /* Wait for character */
- while (p[1] & DESC_OWNER) {
- udelay (100);
- INVALIDATE_DCACHE (&p[0], &p[1]);
- }
-
- /* Handle error case */
- if (p[1] & (1 << 15)) {
- printf ("oops, error: %08x\n", p[1]);
-
- temp = GTREGREAD_MIRROR (GALMPSC_CHANNELREG_2,
- CHANNEL, GALMPSC_REG_GAP);
- temp |= (1 << 23);
- GT_REG_WRITE_MIRROR (GALMPSC_CHANNELREG_2, CHANNEL,
- GALMPSC_REG_GAP, temp);
-
- /* Can't poll on abort bit, so we just wait. */
- udelay (100);
-
- galsdma_enable_rx ();
- }
-
- /* Number of bytes left in this descriptor */
- len = p[0] & 0xffff;
-
- if (len) {
- /* Where to look */
- idx = 5;
- if (done > 3)
- idx = 4;
- if (done > 7)
- idx = 7;
- if (done > 11)
- idx = 6;
-
- INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
- ch = p[idx] & 0xff;
- done++;
- }
-
- if (done < len) {
- /* this descriptor has more bytes still
- * shift down the char we just read, and leave the
- * buffer in place for the next time around
- */
- p[idx] = p[idx] >> 8;
- FLUSH_DCACHE (&p[idx], &p[idx + 1]);
- }
-
- if (done == len) {
- /* nothing left in this descriptor.
- * go to next one
- */
- p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
- p[0] = 0x00100000;
- FLUSH_DCACHE (&p[0], &p[1]);
- /* Next descriptor */
- rx_desc_index = (rx_desc_index + 1) % RX_DESC;
- done = 0;
- }
- } while (len == 0); /* galileo bug.. len might be zero */
-
- return ch;
-}
-
-int
-mpsc_test_char(void)
-{
- volatile unsigned int *p = &rx_desc_base[rx_desc_index*8];
-
- INVALIDATE_DCACHE(&p[1], &p[2]);
-
- if (p[1] & DESC_OWNER) return 0;
- else return 1;
-}
-
-int
-mpsc_init(int baud)
-{
- memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack));
- MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff;
-
- /* BRG CONFIG */
- galbrg_set_baudrate(CHANNEL, baud);
-#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
- galbrg_set_clksrc(CHANNEL,0x8); /* connect TCLK -> BRG */
-#else
- galbrg_set_clksrc(CHANNEL,0);
-#endif
- galbrg_set_CUV(CHANNEL, 0);
- galbrg_enable(CHANNEL);
-
- /* Set up clock routing */
- galmpsc_connect(CHANNEL, GALMPSC_CONNECT);
- galmpsc_route_serial(CHANNEL, GALMPSC_CONNECT);
- galmpsc_route_rx_clock(CHANNEL, CHANNEL);
- galmpsc_route_tx_clock(CHANNEL, CHANNEL);
-
- /* reset MPSC state */
- galmpsc_shutdown(CHANNEL);
-
- /* SDMA CONFIG */
- galsdma_set_burstsize(CHANNEL, L1_CACHE_BYTES/8); /* in 64 bit words (8 bytes) */
- galsdma_set_txle(CHANNEL);
- galsdma_set_rxle(CHANNEL);
- galsdma_set_RC(CHANNEL, 0xf);
- galsdma_set_SFM(CHANNEL);
- galsdma_set_RFT(CHANNEL);
-
- /* MPSC CONFIG */
- galmpsc_write_config_regs(CHANNEL, GALMPSC_UART);
- galmpsc_config_channel_regs(CHANNEL);
- galmpsc_set_char_length(CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */
- galmpsc_set_parity(CHANNEL, GALMPSC_PARITY_NONE); /* N */
- galmpsc_set_stop_bit_length(CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */
-
- /* COMM_MPSC CONFIG */
-#ifdef SOFTWARE_CACHE_MANAGEMENT
- galmpsc_set_snoop(CHANNEL, 0); /* disable snoop */
-#else
- galmpsc_set_snoop(CHANNEL, 1); /* enable snoop */
-#endif
-
- return 0;
-}
-
-void
-mpsc_init2(void)
-{
- int i;
-
- mpsc_putchar = mpsc_putchar_sdma;
-
- /* RX descriptors */
- rx_desc_base = (unsigned int *)malloc(((RX_DESC+1)*8) *
- sizeof(unsigned int));
-
- /* align descriptors */
- rx_desc_base = (unsigned int *)
- (((unsigned int)rx_desc_base+32) & 0xFFFFFFF0);
-
- rx_desc_index = 0;
-
- memset((void *)rx_desc_base, 0, (RX_DESC*8)*sizeof(unsigned int));
-
- for (i = 0; i < RX_DESC; i++) {
- rx_desc_base[i*8 + 3] = (unsigned int)&rx_desc_base[i*8 + 4]; /* Buffer */
- rx_desc_base[i*8 + 2] = (unsigned int)&rx_desc_base[(i+1)*8]; /* Next descriptor */
- rx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST; /* Command & control */
- rx_desc_base[i*8] = 0x00100000;
- }
- rx_desc_base[(i-1)*8 + 2] = (unsigned int)&rx_desc_base[0];
-
- FLUSH_DCACHE(&rx_desc_base[0], &rx_desc_base[RX_DESC*8]);
- GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
- (unsigned int)&rx_desc_base[0]);
-
- /* TX descriptors */
- tx_desc_base = (unsigned int *)malloc(((TX_DESC+1)*8) *
- sizeof(unsigned int));
-
- /* align descriptors */
- tx_desc_base = (unsigned int *)
- (((unsigned int)tx_desc_base+32) & 0xFFFFFFF0);
-
- tx_desc_index = -1;
-
- memset((void *)tx_desc_base, 0, (TX_DESC*8)*sizeof(unsigned int));
-
- for (i = 0; i < TX_DESC; i++) {
- tx_desc_base[i*8 + 5] = (unsigned int)0x23232323;
- tx_desc_base[i*8 + 4] = (unsigned int)0x23232323;
- tx_desc_base[i*8 + 3] = (unsigned int)&tx_desc_base[i*8 + 4];
- tx_desc_base[i*8 + 2] = (unsigned int)&tx_desc_base[(i+1)*8];
- tx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
-
- /* set sbytecnt and shadow byte cnt to 1 */
- tx_desc_base[i*8] = 0x00010001;
- }
- tx_desc_base[(i-1)*8 + 2] = (unsigned int)&tx_desc_base[0];
-
- FLUSH_DCACHE(&tx_desc_base[0], &tx_desc_base[TX_DESC*8]);
-
- udelay(100);
-
- galsdma_enable_rx();
-
- return;
-}
-
-int
-galbrg_set_baudrate(int channel, int rate)
-{
- int clock;
-
- galbrg_disable(channel);
-
-#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
- /* from tclk */
- clock = (CONFIG_SYS_BUS_CLK/(16*rate)) - 1;
-#else
- clock = (3686400/(16*rate)) - 1;
-#endif
-
- galbrg_set_CDV(channel, clock);
-
- galbrg_enable(channel);
-
- MIRROR_HACK->baudrate = rate;
-
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-/* Below are all the private functions that no one else needs */
-
-static int
-galbrg_set_CDV(int channel, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
- temp &= 0xFFFF0000;
- temp |= (value & 0x0000FFFF);
- GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel,GALBRG_REG_GAP, temp);
-
- return 0;
-}
-
-static int
-galbrg_enable(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
- temp |= 0x00010000;
- GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
-
- return 0;
-}
-
-static int
-galbrg_disable(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
- temp &= 0xFFFEFFFF;
- GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
-
- return 0;
-}
-
-static int
-galbrg_set_clksrc(int channel, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP);
- temp &= 0xFF83FFFF;
- temp |= (value << 18);
- GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP,temp);
-
- return 0;
-}
-
-static int
-galbrg_set_CUV(int channel, int value)
-{
- GT_REG_WRITE(GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
-
- return 0;
-}
-
-#if 0
-static int
-galbrg_reset(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
- temp |= 0x20000;
- GT_REG_WRITE(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
-
- return 0;
-}
-#endif
-
-static int
-galsdma_set_RFT(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp |= 0x00000001;
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
-
- return 0;
-}
-
-static int
-galsdma_set_SFM(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp |= 0x00000002;
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
-
- return 0;
-}
-
-static int
-galsdma_set_rxle(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp |= 0x00000040;
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
-
- return 0;
-}
-
-static int
-galsdma_set_txle(int channel)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp |= 0x00000080;
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
-
- return 0;
-}
-
-static int
-galsdma_set_RC(int channel, unsigned int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp &= ~0x0000003c;
- temp |= (value << 2);
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
-
- return 0;
-}
-
-static int
-galsdma_set_burstsize(int channel, unsigned int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
- temp &= 0xFFFFCFFF;
- switch (value) {
- case 8:
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
- (temp | (0x3 << 12)));
- break;
-
- case 4:
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
- (temp | (0x2 << 12)));
- break;
-
- case 2:
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
- (temp | (0x1 << 12)));
- break;
-
- case 1:
- GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
- (temp | (0x0 << 12)));
- break;
-
- default:
- return -1;
- break;
- }
-
- return 0;
-}
-
-static int
-galmpsc_connect(int channel, int connect)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER);
-
- if ((channel == 0) && connect)
- temp &= ~0x00000007;
- else if ((channel == 1) && connect)
- temp &= ~(0x00000007 << 6);
- else if ((channel == 0) && !connect)
- temp |= 0x00000007;
- else
- temp |= (0x00000007 << 6);
-
- /* Just in case... */
- temp &= 0x3fffffff;
-
- GT_REG_WRITE_MIRROR_G(GALMPSC_ROUTING_REGISTER, temp);
-
- return 0;
-}
-
-static int
-galmpsc_route_serial(int channel, int connect)
-{
- unsigned int temp;
-
- temp = GTREGREAD(GALMPSC_SERIAL_MULTIPLEX);
-
- if ((channel == 0) && connect)
- temp |= 0x00000100;
- else if ((channel == 1) && connect)
- temp |= 0x00001000;
- else if ((channel == 0) && !connect)
- temp &= ~0x00000100;
- else
- temp &= ~0x00001000;
-
- GT_REG_WRITE(GALMPSC_SERIAL_MULTIPLEX,temp);
-
- return 0;
-}
-
-static int
-galmpsc_route_rx_clock(int channel, int brg)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE);
-
- if (channel == 0)
- temp |= brg;
- else
- temp |= (brg << 8);
-
- GT_REG_WRITE_MIRROR_G(GALMPSC_RxC_ROUTE,temp);
-
- return 0;
-}
-
-static int
-galmpsc_route_tx_clock(int channel, int brg)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE);
-
- if (channel == 0)
- temp |= brg;
- else
- temp |= (brg << 8);
-
- GT_REG_WRITE_MIRROR_G(GALMPSC_TxC_ROUTE,temp);
-
- return 0;
-}
-
-static int
-galmpsc_write_config_regs(int mpsc, int mode)
-{
- if (mode == GALMPSC_UART) {
- /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
- GT_REG_WRITE(GALMPSC_MCONF_LOW + (mpsc*GALMPSC_REG_GAP),
- 0x000004c4);
-
- /* Main config reg High (32x Rx/Tx clock mode, width=8bits */
- GT_REG_WRITE(GALMPSC_MCONF_HIGH +(mpsc*GALMPSC_REG_GAP),
- 0x024003f8);
- /* 22 2222 1111 */
- /* 54 3210 9876 */
- /* 0000 0010 0000 0000 */
- /* 1 */
- /* 098 7654 3210 */
- /* 0000 0011 1111 1000 */
- } else
- return -1;
-
- return 0;
-}
-
-static int
-galmpsc_config_channel_regs(int mpsc)
-{
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0);
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1);
- GT_REG_WRITE(GALMPSC_CHANNELREG_4+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_5+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_6+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_7+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_8+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_9+(mpsc*GALMPSC_REG_GAP), 0);
- GT_REG_WRITE(GALMPSC_CHANNELREG_10+(mpsc*GALMPSC_REG_GAP), 0);
-
- galmpsc_set_brkcnt(mpsc, 0x3);
- galmpsc_set_tcschar(mpsc, 0xab);
-
- return 0;
-}
-
-static int
-galmpsc_set_brkcnt(int mpsc, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
- temp &= 0x0000FFFF;
- temp |= (value << 16);
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
-
- return 0;
-}
-
-static int
-galmpsc_set_tcschar(int mpsc, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
- temp &= 0xFFFF0000;
- temp |= value;
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
-
- return 0;
-}
-
-static int
-galmpsc_set_char_length(int mpsc, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
- temp &= 0xFFFFCFFF;
- temp |= (value << 12);
- GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP, temp);
-
- return 0;
-}
-
-static int
-galmpsc_set_stop_bit_length(int mpsc, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
- temp |= (value << 14);
- GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP,temp);
-
- return 0;
-}
-
-static int
-galmpsc_set_parity(int mpsc, int value)
-{
- unsigned int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
- if (value != -1) {
- temp &= 0xFFF3FFF3;
- temp |= ((value << 18) | (value << 2));
- temp |= ((value << 17) | (value << 1));
- } else {
- temp &= 0xFFF1FFF1;
- }
-
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
-
- return 0;
-}
-
-static int
-galmpsc_enter_hunt(int mpsc)
-{
- int temp;
-
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
- temp |= 0x80000000;
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
-
- /* Should Poll on Enter Hunt bit, but the register is write-only */
- /* errata suggests pausing 100 system cycles */
- udelay(100);
-
- return 0;
-}
-
-
-static int
-galmpsc_shutdown(int mpsc)
-{
-#if 0
- unsigned int temp;
-
- /* cause RX abort (clears RX) */
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
- temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
- temp &= ~MPSC_ENTER_HUNT;
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP,temp);
-#endif
-
- GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
- GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
- SDMA_TX_ABORT | SDMA_RX_ABORT);
-
- /* shut down the MPSC */
- GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
- GT_REG_WRITE(GALMPSC_MCONF_HIGH, 0);
- GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG, mpsc, GALMPSC_REG_GAP,0);
-
- udelay(100);
-
- /* shut down the sdma engines. */
- /* reset config to default */
- GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
- 0x000000fc);
-
- udelay(100);
-
- /* clear the SDMA current and first TX and RX pointers */
- GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
- GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
- GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
-
- udelay(100);
-
- return 0;
-}
-
-static void
-galsdma_enable_rx(void)
-{
- int temp;
-
- /* Enable RX processing */
- temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
- temp |= RX_ENABLE;
- GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
-
- galmpsc_enter_hunt(CHANNEL);
-}
-
-static int
-galmpsc_set_snoop(int mpsc, int value)
-{
- int reg = mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : MPSC_0_ADDRESS_CONTROL_LOW;
- int temp=GTREGREAD(reg);
- if(value)
- temp |= (1<< 6) | (1<<14) | (1<<22) | (1<<30);
- else
- temp &= ~((1<< 6) | (1<<14) | (1<<22) | (1<<30));
- GT_REG_WRITE(reg, temp);
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include <galileo/gt64260R.h>
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_init2(void);
-char mpsc_getchar(void);
-int mpsc_test_char(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-extern int (*mpsc_putchar)(char ch);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC 5
-#define RX_DESC 20
-
-#define DESC_FIRST 0x00010000
-#define DESC_LAST 0x00020000
-#define DESC_OWNER 0x80000000
-
-#define TX_DEMAND 0x00800000
-#define TX_STOP 0x00010000
-#define RX_ENABLE 0x00000080
-
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
-#define MPSC_RX_ABORT (1 << 23)
-#define MPSC_ENTER_HUNT (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT 0x1
-#define GALMPSC_DISCONNECT 0x0
-
-#define GALMPSC_UART 0x1
-
-#define GALMPSC_STOP_BITS_1 0x0
-#define GALMPSC_STOP_BITS_2 0x1
-#define GALMPSC_CHAR_LENGTH_8 0x3
-#define GALMPSC_CHAR_LENGTH_7 0x2
-
-#define GALMPSC_PARITY_ODD 0x0
-#define GALMPSC_PARITY_EVEN 0x2
-#define GALMPSC_PARITY_MARK 0x3
-#define GALMPSC_PARITY_SPACE 0x1
-#define GALMPSC_PARITY_NONE -1
-
-#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
-#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
-#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
-#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
-
-#define GALMPSC_REG_GAP 0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
-#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
-#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
-#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
-#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
-#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
-#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
-#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
-#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
-#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
-#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST (1 << 16)
-#define GALSDMA_COMMAND_LAST (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO (1 << 30)
-#define GALSDMA_COMMAND_OWNER (1 << 31)
-
-#define GALSDMA_RX 0
-#define GALSDMA_TX 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
-#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
-#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
-#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
-#define GALSDMA_REG_DIFF 0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
-
-#define GALSDMA_MODE_UART 0
-#define GALSDMA_MODE_BISYNC 1
-#define GALSDMA_MODE_HDLC 2
-#define GALSDMA_MODE_TRANSPARENT 3
-
-#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
-#define GALBRG_REG_GAP 0x0008
-#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
-
-#endif /* __MPSC_H__ */
+++ /dev/null
-/* PCI.c - PCI functions */
-
-/* Copyright - Galileo technology. */
-
-#include <common.h>
-#include <pci.h>
-
-#include <galileo/pci.h>
-
-static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
-#ifdef CONFIG_ZUMA_V2
- {0, 0, 0, 0, 0, 0, 0, 29,[8 ... PCI_MAX_DEVICES - 1] = 0},
- {0, 0, 0, 0, 0, 0, 0, 28,[8 ... PCI_MAX_DEVICES - 1] = 0}
-#else /* EVB??? This is a guess */
- {0, 0, 0, 0, 0, 0, 0, 27, 27,[9 ... PCI_MAX_DEVICES - 1] = 0},
- {0, 0, 0, 0, 0, 0, 0, 29, 29,[9 ... PCI_MAX_DEVICES - 1] = 0}
-#endif
-};
-
-static const unsigned int pci_p2p_configuration_reg[] = {
- PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static const unsigned int pci_configuration_address[] = {
- PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
-};
-
-static const unsigned int pci_configuration_data[] = {
- PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
- PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
-};
-
-static const unsigned int pci_error_cause_reg[] = {
- PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
-};
-
-static const unsigned int pci_arbiter_control[] = {
- PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
-};
-
-static const unsigned int pci_snoop_control_base_0_low[] = {
- PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_snoop_control_top_0[] = {
- PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
-};
-
-static const unsigned int pci_access_control_base_0_low[] = {
- PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
-};
-static const unsigned int pci_access_control_top_0[] = {
- PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
-};
-
-static const unsigned int pci_scs_bank_size[2][4] = {
- {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
- PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
- {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
- PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
-};
-
-static const unsigned int pci_p2p_configuration[] = {
- PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
-};
-
-static unsigned int local_buses[] = { 0, 0 };
-
-/********************************************************************
-* pciWriteConfigReg - Write to a PCI configuration register
-* - Make sure the GT is configured as a master before writing
-* to another device on the PCI.
-* - The function takes care of Big/Little endian conversion.
-*
-*
-* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
-* (or any other PCI device spec)
-* pciDevNum: The device number needs to be addressed.
-*
-* Configuration Address 0xCF8:
-*
-* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
-* |congif|Reserved| Bus |Device|Function|Register|00|
-* |Enable| |Number|Number| Number | Number | | <=field Name
-*
-*********************************************************************/
-void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
- unsigned int pciDevNum, unsigned int data)
-{
- volatile unsigned int DataForAddrReg;
- unsigned int functionNum;
- unsigned int busNum = PCI_BUS (pciDevNum);
- unsigned int addr;
-
- if (pciDevNum > 32) /* illegal device Number */
- return;
- if (pciDevNum == SELF) { /* configure our configuration space. */
- pciDevNum =
- (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
- 0x1f;
- busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
- 0xff0000;
- }
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xfc;
- DataForAddrReg =
- (regOffset | pciDevNum | functionNum | busNum) | BIT31;
- GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
- GT_REG_READ (pci_configuration_address[host], &addr);
- if (addr != DataForAddrReg)
- return;
- GT_REG_WRITE (pci_configuration_data[host], data);
-}
-
-/********************************************************************
-* pciReadConfigReg - Read from a PCI0 configuration register
-* - Make sure the GT is configured as a master before reading
-* from another device on the PCI.
-* - The function takes care of Big/Little endian conversion.
-* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
-* spec)
-* pciDevNum: The device number needs to be addressed.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-* cause register to make sure the data is valid
-*
-* Configuration Address 0xCF8:
-*
-* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
-* |congif|Reserved| Bus |Device|Function|Register|00|
-* |Enable| |Number|Number| Number | Number | | <=field Name
-*
-*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
- unsigned int pciDevNum)
-{
- volatile unsigned int DataForAddrReg;
- unsigned int data;
- unsigned int functionNum;
- unsigned int busNum = PCI_BUS (pciDevNum);
-
- if (pciDevNum > 32) /* illegal device Number */
- return 0xffffffff;
- if (pciDevNum == SELF) { /* configure our configuration space. */
- pciDevNum =
- (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
- 0x1f;
- busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
- 0xff0000;
- }
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xfc;
- DataForAddrReg =
- (regOffset | pciDevNum | functionNum | busNum) | BIT31;
- GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
- GT_REG_READ (pci_configuration_address[host], &data);
- if (data != DataForAddrReg)
- return 0xffffffff;
- GT_REG_READ (pci_configuration_data[host], &data);
- return data;
-}
-
-/********************************************************************
-* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
-* the agent is placed on another Bus. For more
-* information read P2P in the PCI spec.
-*
-* Inputs: unsigned int regOffset - The register offset as it apears in the
-* GT spec (or any other PCI device spec).
-* unsigned int pciDevNum - The device number needs to be addressed.
-* unsigned int busNum - On which bus does the Target agent connect
-* to.
-* unsigned int data - data to be written.
-*
-* Configuration Address 0xCF8:
-*
-* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
-* |congif|Reserved| Bus |Device|Function|Register|01|
-* |Enable| |Number|Number| Number | Number | | <=field Name
-*
-* The configuration Address is configure as type-I (bits[1:0] = '01') due to
-* PCI spec referring to P2P.
-*
-*********************************************************************/
-void pciOverBridgeWriteConfigReg (PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum, unsigned int data)
-{
- unsigned int DataForReg;
- unsigned int functionNum;
-
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xff;
- busNum = busNum << 16;
- if (pciDevNum == SELF) { /* This board */
- DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
- } else {
- DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
- BIT31 | BIT0;
- }
- GT_REG_WRITE (pci_configuration_address[host], DataForReg);
- if (pciDevNum == SELF) { /* This board */
- GT_REG_WRITE (pci_configuration_data[host], data);
- } else { /* configuration Transaction over the pci. */
-
- /* The PCI is working in LE Mode So it swap the Data. */
- GT_REG_WRITE (pci_configuration_data[host], WORD_SWAP (data));
- }
-}
-
-
-/********************************************************************
-* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
-* the agent target locate on another PCI bus.
-* - Make sure the GT is configured as a master
-* before reading from another device on the PCI.
-* - The function takes care of Big/Little endian
-* conversion.
-* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
-* spec). (configuration register offset.)
-* pciDevNum: The device number needs to be addressed.
-* busNum: the Bus number where the agent is place.
-* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
-* cause register to make sure the data is valid
-*
-* Configuration Address 0xCF8:
-*
-* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
-* |congif|Reserved| Bus |Device|Function|Register|01|
-* |Enable| |Number|Number| Number | Number | | <=field Name
-*
-*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum)
-{
- unsigned int DataForReg;
- unsigned int data;
- unsigned int functionNum;
-
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xff;
- busNum = busNum << 16;
- if (pciDevNum == SELF) { /* This board */
- DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
- } else { /* agent on another bus */
-
- DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
- BIT0 | BIT31;
- }
- GT_REG_WRITE (pci_configuration_address[host], DataForReg);
- if (pciDevNum == SELF) { /* This board */
- GT_REG_READ (pci_configuration_data[host], &data);
- return data;
- } else { /* The PCI is working in LE Mode So it swap the Data. */
-
- GT_REG_READ (pci_configuration_data[host], &data);
- return WORD_SWAP (data);
- }
-}
-
-/********************************************************************
-* pciGetRegOffset - Gets the register offset for this region config.
-*
-* INPUT: Bus, Region - The bus and region we ask for its base address.
-* OUTPUT: N/A
-* RETURNS: PCI register base address
-*********************************************************************/
-static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
-{
- switch (host) {
- case PCI_HOST0:
- switch (region) {
- case PCI_IO:
- return PCI_0I_O_LOW_DECODE_ADDRESS;
- case PCI_REGION0:
- return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
- case PCI_REGION1:
- return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
- case PCI_REGION2:
- return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
- case PCI_REGION3:
- return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
- }
- case PCI_HOST1:
- switch (region) {
- case PCI_IO:
- return PCI_1I_O_LOW_DECODE_ADDRESS;
- case PCI_REGION0:
- return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
- case PCI_REGION1:
- return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
- case PCI_REGION2:
- return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
- case PCI_REGION3:
- return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
- }
- }
- return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
-}
-
-static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
-{
- switch (host) {
- case PCI_HOST0:
- switch (region) {
- case PCI_IO:
- return PCI_0I_O_ADDRESS_REMAP;
- case PCI_REGION0:
- return PCI_0MEMORY0_ADDRESS_REMAP;
- case PCI_REGION1:
- return PCI_0MEMORY1_ADDRESS_REMAP;
- case PCI_REGION2:
- return PCI_0MEMORY2_ADDRESS_REMAP;
- case PCI_REGION3:
- return PCI_0MEMORY3_ADDRESS_REMAP;
- }
- case PCI_HOST1:
- switch (region) {
- case PCI_IO:
- return PCI_1I_O_ADDRESS_REMAP;
- case PCI_REGION0:
- return PCI_1MEMORY0_ADDRESS_REMAP;
- case PCI_REGION1:
- return PCI_1MEMORY1_ADDRESS_REMAP;
- case PCI_REGION2:
- return PCI_1MEMORY2_ADDRESS_REMAP;
- case PCI_REGION3:
- return PCI_1MEMORY3_ADDRESS_REMAP;
- }
- }
- return PCI_0MEMORY0_ADDRESS_REMAP;
-}
-
-bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
- unsigned int bankBase, unsigned int bankLength)
-{
- unsigned int low = 0xfff;
- unsigned int high = 0x0;
- unsigned int regOffset = pciGetRegOffset (host, region);
- unsigned int remapOffset = pciGetRemapOffset (host, region);
-
- if (bankLength != 0) {
- low = (bankBase >> 20) & 0xfff;
- high = ((bankBase + bankLength) >> 20) - 1;
- }
-
- GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */
- GT_REG_WRITE (regOffset + 8, high);
-
- if (bankLength != 0) { /* must do AFTER writing maps */
- GT_REG_WRITE (remapOffset, remapBase >> 20); /* sorry, 32 bits only.
- dont support upper 32
- in this driver */
- }
- return true;
-}
-
-unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
-{
- unsigned int low;
- unsigned int regOffset = pciGetRegOffset (host, region);
-
- GT_REG_READ (regOffset, &low);
- return (low & 0xfff) << 20;
-}
-
-unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
-{
- unsigned int low, high;
- unsigned int regOffset = pciGetRegOffset (host, region);
-
- GT_REG_READ (regOffset, &low);
- GT_REG_READ (regOffset + 8, &high);
- high &= 0xfff;
- low &= 0xfff;
- if (high <= low)
- return 0;
- return (high + 1 - low) << 20;
-}
-
-/********************************************************************
-* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
-*
-* Inputs: base and size of PCI SCS
-*********************************************************************/
-void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
- unsigned int pciDramBase, unsigned int pciDramSize)
-{
- pciDramBase = pciDramBase & 0xfffff000;
- pciDramBase = pciDramBase | (pciReadConfigReg (host,
- PCI_SCS_0_BASE_ADDRESS
- + 4 * bank,
- SELF) & 0x00000fff);
- pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + 4 * bank, SELF,
- pciDramBase);
- if (pciDramSize == 0)
- pciDramSize++;
- GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
-}
-
-
-/********************************************************************
-* pciSetRegionFeatures - This function modifys one of the 8 regions with
-* feature bits given as an input.
-* - Be advised to check the spec before modifying them.
-* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
-* unsigned int features - See file: pci.h there are defintion for those
-* region features.
-* unsigned int baseAddress - The region base Address.
-* unsigned int topAddress - The region top Address.
-* Returns: false if one of the parameters is erroneous true otherwise.
-*********************************************************************/
-bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
- unsigned int features, unsigned int baseAddress,
- unsigned int regionLength)
-{
- unsigned int accessLow;
- unsigned int accessHigh;
- unsigned int accessTop = baseAddress + regionLength;
-
- if (regionLength == 0) { /* close the region. */
- pciDisableAccessRegion (host, region);
- return true;
- }
- /* base Address is store is bits [11:0] */
- accessLow = (baseAddress & 0xfff00000) >> 20;
- /* All the features are update according to the defines in pci.h (to be on
- the safe side we disable bits: [11:0] */
- accessLow = accessLow | (features & 0xfffff000);
- /* write to the Low Access Region register */
- GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
- accessLow);
-
- accessHigh = (accessTop & 0xfff00000) >> 20;
-
- /* write to the High Access Region register */
- GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
- accessHigh - 1);
- return true;
-}
-
-/********************************************************************
-* pciDisableAccessRegion - Disable The given Region by writing MAX size
-* to its low Address and MIN size to its high Address.
-*
-* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
-* Returns: N/A.
-*********************************************************************/
-void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
-{
- /* writing back the registers default values. */
- GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
- 0x01001fff);
- GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
-}
-
-/********************************************************************
-* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
-*
-* Inputs: N/A
-* Returns: true.
-*********************************************************************/
-bool pciArbiterEnable (PCI_HOST host)
-{
- unsigned int regData;
-
- GT_REG_READ (pci_arbiter_control[host], ®Data);
- GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
- return true;
-}
-
-/********************************************************************
-* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
-*
-* Inputs: N/A
-* Returns: true
-*********************************************************************/
-bool pciArbiterDisable (PCI_HOST host)
-{
- unsigned int regData;
-
- GT_REG_READ (pci_arbiter_control[host], ®Data);
- GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
- return true;
-}
-
-/********************************************************************
-* pciParkingDisable - Park on last option disable, with this function you can
-* disable the park on last mechanism for each agent.
-* disabling this option for all agents results parking
-* on the internal master.
-*
-* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent.
-* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
-* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
-* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
-* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
-* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
-* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
-* Returns: true
-*********************************************************************/
-bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
- PCI_AGENT_PARK externalAgent0,
- PCI_AGENT_PARK externalAgent1,
- PCI_AGENT_PARK externalAgent2,
- PCI_AGENT_PARK externalAgent3,
- PCI_AGENT_PARK externalAgent4,
- PCI_AGENT_PARK externalAgent5)
-{
- unsigned int regData;
- unsigned int writeData;
-
- GT_REG_READ (pci_arbiter_control[host], ®Data);
- writeData = (internalAgent << 14) + (externalAgent0 << 15) +
- (externalAgent1 << 16) + (externalAgent2 << 17) +
- (externalAgent3 << 18) + (externalAgent4 << 19) +
- (externalAgent5 << 20);
- regData = (regData & ~(0x7f << 14)) | writeData;
- GT_REG_WRITE (pci_arbiter_control[host], regData);
- return true;
-}
-
-/********************************************************************
-* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
-* supports Cache Coherency in the PCI_n interface.
-* Inputs: region - One of the four regions.
-* snoopType - There is four optional Types:
-* 1. No Snoop.
-* 2. Snoop to WT region.
-* 3. Snoop to WB region.
-* 4. Snoop & Invalidate to WB region.
-* baseAddress - Base Address of this region.
-* regionLength - Region length.
-* Returns: false if one of the parameters is wrong otherwise return true.
-*********************************************************************/
-bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
- PCI_SNOOP_TYPE snoopType,
- unsigned int baseAddress,
- unsigned int regionLength)
-{
- unsigned int snoopXbaseAddress;
- unsigned int snoopXtopAddress;
- unsigned int data;
- unsigned int snoopHigh = baseAddress + regionLength;
-
- if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
- return false;
- snoopXbaseAddress =
- pci_snoop_control_base_0_low[host] + 0x10 * region;
- snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
- if (regionLength == 0) { /* closing the region */
- GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
- GT_REG_WRITE (snoopXtopAddress, 0);
- return true;
- }
- baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
- data = (baseAddress >> 20) | snoopType << 12;
- GT_REG_WRITE (snoopXbaseAddress, data);
- snoopHigh = (snoopHigh & 0xfff00000) >> 20;
- GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
- return true;
-}
-
-/*
- *
- */
-
-static int gt_read_config_dword (struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 * value)
-{
- int bus = PCI_BUS (dev);
-
- if ((bus == local_buses[0]) || (bus == local_buses[1])) {
- *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
- PCI_DEV (dev));
- } else {
- *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
- cfg_addr, offset,
- PCI_DEV (dev), bus);
- }
- return 0;
-}
-
-static int gt_write_config_dword (struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 value)
-{
- int bus = PCI_BUS (dev);
-
- if ((bus == local_buses[0]) || (bus == local_buses[1])) {
- pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
- PCI_DEV (dev), value);
- } else {
- pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
- offset, PCI_DEV (dev), value,
- bus);
- }
- return 0;
-}
-
-/*
- *
- */
-
-static void gt_setup_ide (struct pci_controller *hose,
- pci_dev_t dev, struct pci_config_table *entry)
-{
- static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
- u32 bar_response, bar_value;
- int bar;
-
- for (bar = 0; bar < 6; bar++) {
- pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
- 0x0);
- pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
- &bar_response);
-
- pciauto_region_allocate (bar_response &
- PCI_BASE_ADDRESS_SPACE_IO ? hose->
- pci_io : hose->pci_mem, ide_bar[bar],
- &bar_value);
-
- pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
- bar_value);
- }
-}
-
-#ifndef CONFIG_P3G4
-static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char pin, irq;
-
- pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
-
- if (pin == 1) { /* only allow INT A */
- irq = pci_irq_swizzle[(PCI_HOST) hose->
- cfg_addr][PCI_DEV (dev)];
- if (irq)
- pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
- }
-}
-#endif
-
-struct pci_config_table gt_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
-
- {}
-};
-
-struct pci_controller pci0_hose = {
-#ifndef CONFIG_P3G4
- fixup_irq:gt_fixup_irq,
-#endif
- config_table:gt_config_table,
-};
-
-struct pci_controller pci1_hose = {
-#ifndef CONFIG_P3G4
- fixup_irq:gt_fixup_irq,
-#endif
- config_table:gt_config_table,
-};
-
-void pci_init_board (void)
-{
- unsigned int command;
-
- pci0_hose.first_busno = 0;
- pci0_hose.last_busno = 0xff;
- local_buses[0] = pci0_hose.first_busno;
- /* PCI memory space */
- pci_set_region (pci0_hose.regions + 0,
- CONFIG_SYS_PCI0_0_MEM_SPACE,
- CONFIG_SYS_PCI0_0_MEM_SPACE,
- CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region (pci0_hose.regions + 1,
- CONFIG_SYS_PCI0_IO_SPACE_PCI,
- CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
-
- pci_set_ops (&pci0_hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- gt_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- gt_write_config_dword);
-
- pci0_hose.region_count = 2;
-
- pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
-
- pci_register_hose (&pci0_hose);
-
-#ifndef CONFIG_P3G4
- pciArbiterEnable (PCI_HOST0);
- pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-#endif
-
- command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MASTER;
- pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
- pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
-
- command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MEMORY;
- pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-
- pci1_hose.first_busno = pci0_hose.last_busno + 1;
- pci1_hose.last_busno = 0xff;
- pci1_hose.current_busno = pci0_hose.current_busno;
- local_buses[1] = pci1_hose.first_busno;
-
- /* PCI memory space */
- pci_set_region (pci1_hose.regions + 0,
- CONFIG_SYS_PCI1_0_MEM_SPACE,
- CONFIG_SYS_PCI1_0_MEM_SPACE,
- CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region (pci1_hose.regions + 1,
- CONFIG_SYS_PCI1_IO_SPACE_PCI,
- CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
-
- pci_set_ops (&pci1_hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- gt_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- gt_write_config_dword);
-
- pci1_hose.region_count = 2;
-
- pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
-
- pci_register_hose (&pci1_hose);
-
-#ifndef CONFIG_P3G4
- pciArbiterEnable (PCI_HOST1);
- pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
-#endif
-
- command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MASTER;
- pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-
- pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
-
- command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MEMORY;
- pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <galileo/memory.h>
-#include <galileo/pci.h>
-#include <galileo/gt64260R.h>
-#include <net.h>
-#include <linux/compiler.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "i2c.h"
-#include "64260.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* #define DEBUG */
-#define MAP_PCI
-
-#ifdef DEBUG
-#define DP(x) x
-#else
-#define DP(x)
-#endif
-
-#define GB (1 << 30)
-
-/* structure to store the relevant information about an sdram bank */
-typedef struct sdram_info {
- uchar drb_size;
- uchar registered, ecc;
- uchar tpar;
- uchar tras_clocks;
- uchar burst_len;
- uchar banks, slot;
- int size; /* detected size, not from I2C but from dram_size() */
-} sdram_info_t;
-
-#ifdef DEBUG
-void dump_dimm_info (struct sdram_info *d)
-{
- static const char *ecc_legend[] = { "", " Parity", " ECC" };
-
- printf ("dimm%s %sDRAM: %dMibytes:\n",
- ecc_legend[d->ecc],
- d->registered ? "R" : "", (d->size >> 20));
- printf (" drb=%d tpar=%d tras=%d burstlen=%d banks=%d slot=%d\n",
- d->drb_size, d->tpar, d->tras_clocks, d->burst_len,
- d->banks, d->slot);
-}
-#endif
-
-static int
-memory_map_bank (unsigned int bankNo,
- unsigned int bankBase, unsigned int bankLength)
-{
-#ifdef DEBUG
- if (bankLength > 0) {
- printf ("mapping bank %d at %08x - %08x\n",
- bankNo, bankBase, bankBase + bankLength - 1);
- } else {
- printf ("unmapping bank %d\n", bankNo);
- }
-#endif
-
- memoryMapBank (bankNo, bankBase, bankLength);
-
- return 0;
-}
-
-#ifdef MAP_PCI
-static int
-memory_map_bank_pci (unsigned int bankNo,
- unsigned int bankBase, unsigned int bankLength)
-{
- PCI_HOST host;
-
- for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
- const int features =
- PREFETCH_ENABLE |
- DELAYED_READ_ENABLE |
- AGGRESSIVE_PREFETCH |
- READ_LINE_AGGRESSIVE_PREFETCH |
- READ_MULTI_AGGRESSIVE_PREFETCH |
- MAX_BURST_4 | PCI_NO_SWAP;
-
- pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
- pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
- bankLength);
-
- pciSetRegionFeatures (host, bankNo, features, bankBase,
- bankLength);
- }
- return 0;
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-/* much of this code is based on (or is) the code in the pip405 port */
-/* thanks go to the authors of said port - Josh */
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NS10to10PS (unsigned char spd_byte)
-{
- unsigned short ns, ns10;
-
- /* isolate upper nibble */
- ns = (spd_byte >> 4) & 0x0F;
- /* isolate lower nibble */
- ns10 = (spd_byte & 0x0F);
-
- return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NSto10PS (unsigned char spd_byte)
-{
- return (spd_byte * 100);
-}
-
-#ifdef CONFIG_ZUMA_V2
-static int check_dimm (uchar slot, sdram_info_t * info)
-{
- /* assume 2 dimms, 2 banks each 256M - we dont have an
- * dimm i2c so rely on the detection routines later */
-
- memset (info, 0, sizeof (*info));
-
- info->slot = slot;
- info->banks = 2; /* Detect later */
- info->registered = 0;
- info->drb_size = 32; /* 16 - 256MBit, 32 - 512MBit
- but doesn't matter, both do same
- thing in setup_sdram() */
- info->tpar = 3;
- info->tras_clocks = 5;
- info->burst_len = 4;
-#ifdef CONFIG_ECC
- info->ecc = 0; /* Detect later */
-#endif /* CONFIG_ECC */
- return 0;
-}
-
-#elif defined(CONFIG_P3G4)
-
-static int check_dimm (uchar slot, sdram_info_t * info)
-{
- memset (info, 0, sizeof (*info));
-
- if (slot)
- return 0;
-
- info->slot = slot;
- info->banks = 1;
- info->registered = 0;
- info->drb_size = 4;
- info->tpar = 3;
- info->tras_clocks = 6;
- info->burst_len = 4;
-#ifdef CONFIG_ECC
- info->ecc = 2;
-#endif
- return 0;
-}
-
-#else /* ! CONFIG_ZUMA_V2 && ! CONFIG_P3G4 */
-
-/* This code reads the SPD chip on the sdram and populates
- * the array which is passed in with the relevant information */
-static int check_dimm (uchar slot, sdram_info_t * info)
-{
- uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
- int ret;
- uchar rows, cols, sdram_banks, supp_cal, width, cal_val;
- ulong tmemclk;
- uchar trp_clocks, trcd_clocks;
- uchar data[128];
-
- get_clocks ();
-
- tmemclk = 1000000000 / (gd->bus_clk / 100); /* in 10 ps units */
-
-#ifdef CONFIG_EVB64260_750CX
- if (0 != slot) {
- printf ("check_dimm: The EVB-64260-750CX only has 1 DIMM,");
- printf (" called with slot=%d insetad!\n", slot);
- return 0;
- }
-#endif
- DP (puts ("before i2c read\n"));
-
- ret = i2c_read (addr, 0, 128, data, 0);
-
- DP (puts ("after i2c read\n"));
-
- /* zero all the values */
- memset (info, 0, sizeof (*info));
-
- if (ret) {
- DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
- return 0;
- }
-
- /* first, do some sanity checks */
- if (data[2] != 0x4) {
- printf ("Not SDRAM in slot %d\n", slot);
- return 0;
- }
-
- /* get various information */
- rows = data[3];
- cols = data[4];
- info->banks = data[5];
- sdram_banks = data[17];
- width = data[13] & 0x7f;
-
- DP (printf
- ("sdram_banks: %d, banks: %d\n", sdram_banks, info->banks));
-
- /* check if the memory is registered */
- if (data[21] & (BIT1 | BIT4))
- info->registered = 1;
-
-#ifdef CONFIG_ECC
- /* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
- info->ecc = (data[11] & 2) >> 1;
-#endif
-
- /* bit 1 is CL2, bit 2 is CL3 */
- supp_cal = (data[18] & 0x6) >> 1;
-
- /* compute the relevant clock values */
- trp_clocks = (NSto10PS (data[27]) + (tmemclk - 1)) / tmemclk;
- trcd_clocks = (NSto10PS (data[29]) + (tmemclk - 1)) / tmemclk;
- info->tras_clocks = (NSto10PS (data[30]) + (tmemclk - 1)) / tmemclk;
-
- DP (printf ("trp = %d\ntrcd_clocks = %d\ntras_clocks = %d\n",
- trp_clocks, trcd_clocks, info->tras_clocks));
-
- /* try a CAS latency of 3 first... */
- cal_val = 0;
- if (supp_cal & 3) {
- if (NS10to10PS (data[9]) <= tmemclk)
- cal_val = 3;
- }
-
- /* then 2... */
- if (supp_cal & 2) {
- if (NS10to10PS (data[23]) <= tmemclk)
- cal_val = 2;
- }
-
- DP (printf ("cal_val = %d\n", cal_val));
-
- /* bummer, did't work... */
- if (cal_val == 0) {
- DP (printf ("Couldn't find a good CAS latency\n"));
- return 0;
- }
-
- /* get the largest delay -- these values need to all be the same
- * see Res#6 */
- info->tpar = cal_val;
- if (trp_clocks > info->tpar)
- info->tpar = trp_clocks;
- if (trcd_clocks > info->tpar)
- info->tpar = trcd_clocks;
-
- DP (printf ("tpar set to: %d\n", info->tpar));
-
-#ifdef CONFIG_SYS_BROKEN_CL2
- if (info->tpar == 2) {
- info->tpar = 3;
- DP (printf ("tpar fixed-up to: %d\n", info->tpar));
- }
-#endif
- /* compute the module DRB size */
- info->drb_size =
- (((1 << (rows + cols)) * sdram_banks) * width) / _16M;
-
- DP (printf ("drb_size set to: %d\n", info->drb_size));
-
- /* find the burst len */
- info->burst_len = data[16] & 0xf;
- if ((info->burst_len & 8) == 8) {
- info->burst_len = 1;
- } else if ((info->burst_len & 4) == 4) {
- info->burst_len = 0;
- } else {
- return 0;
- }
-
- info->slot = slot;
- return 0;
-}
-#endif /* ! CONFIG_ZUMA_V2 */
-
-static int setup_sdram_common (sdram_info_t info[2])
-{
- ulong tmp;
- int tpar = 2, tras_clocks = 5, registered = 1;
- __maybe_unused int ecc = 2;
-
- if (!info[0].banks && !info[1].banks)
- return 0;
-
- if (info[0].banks) {
- if (info[0].tpar > tpar)
- tpar = info[0].tpar;
- if (info[0].tras_clocks > tras_clocks)
- tras_clocks = info[0].tras_clocks;
- if (!info[0].registered)
- registered = 0;
- if (info[0].ecc != 2)
- ecc = 0;
- }
-
- if (info[1].banks) {
- if (info[1].tpar > tpar)
- tpar = info[1].tpar;
- if (info[1].tras_clocks > tras_clocks)
- tras_clocks = info[1].tras_clocks;
- if (!info[1].registered)
- registered = 0;
- if (info[1].ecc != 2)
- ecc = 0;
- }
-
- /* SDRAM configuration */
- tmp = GTREGREAD (SDRAM_CONFIGURATION);
-
- /* Turn on physical interleave if both DIMMs
- * have even numbers of banks. */
- if ((info[0].banks == 0 || info[0].banks == 2) &&
- (info[1].banks == 0 || info[1].banks == 2)) {
- /* physical interleave on */
- tmp &= ~(1 << 15);
- } else {
- /* physical interleave off */
- tmp |= (1 << 15);
- }
-
- tmp |= (registered << 17);
-
- /* Use buffer 1 to return read data to the CPU
- * See Res #12 */
- tmp |= (1 << 26);
-
- GT_REG_WRITE (SDRAM_CONFIGURATION, tmp);
- DP (printf ("SDRAM config: %08x\n", GTREGREAD (SDRAM_CONFIGURATION)));
-
- /* SDRAM timing */
- tmp = (((tpar == 3) ? 2 : 1) |
- (((tpar == 3) ? 2 : 1) << 2) |
- (((tpar == 3) ? 2 : 1) << 4) | (tras_clocks << 8));
-
-#ifdef CONFIG_ECC
- /* Setup ECC */
- if (ecc == 2)
- tmp |= 1 << 13;
-#endif /* CONFIG_ECC */
-
- GT_REG_WRITE (SDRAM_TIMING, tmp);
- DP (printf ("SDRAM timing: %08x (%d,%d,%d,%d)\n",
- GTREGREAD (SDRAM_TIMING), tpar, tpar, tpar, tras_clocks));
-
- /* SDRAM address decode register */
- /* program this with the default value */
- GT_REG_WRITE (SDRAM_ADDRESS_DECODE, 0x2);
- DP (printf ("SDRAM decode: %08x\n",
- GTREGREAD (SDRAM_ADDRESS_DECODE)));
-
- return 0;
-}
-
-/* sets up the GT properly with information passed in */
-static int setup_sdram (sdram_info_t * info)
-{
- ulong tmp;
- ulong *addr = 0;
- __maybe_unused ulong check;
- int i;
-
- /* sanity checking */
- if (!info->banks)
- return 0;
-
- /* ---------------------------- */
- /* Program the GT with the discovered data */
-
- /* bank parameters */
- tmp = (0xf << 16); /* leave all virt bank pages open */
-
- DP (printf ("drb_size: %d\n", info->drb_size));
- switch (info->drb_size) {
- case 1:
- tmp |= (1 << 14);
- break;
- case 4:
- case 8:
- tmp |= (2 << 14);
- break;
- case 16:
- case 32:
- tmp |= (3 << 14);
- break;
- default:
- printf ("Error in dram size calculation\n");
- return 1;
- }
-
- /* SDRAM bank parameters */
- /* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
- GT_REG_WRITE (SDRAM_BANK0PARAMETERS + (info->slot * 0x8), tmp);
- GT_REG_WRITE (SDRAM_BANK1PARAMETERS + (info->slot * 0x8), tmp);
- DP (printf
- ("SDRAM bankparam slot %d (bank %d+%d): %08lx\n", info->slot,
- info->slot * 2, (info->slot * 2) + 1, tmp));
-
- /* set the SDRAM configuration for each bank */
- for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) {
- DP (printf ("*** Running a MRS cycle for bank %d ***\n", i));
-
- /* map the bank */
- memory_map_bank (i, 0, GB / 4);
-
- /* set SDRAM mode */
- GT_REG_WRITE (SDRAM_OPERATION_MODE, 0x3);
- check = GTREGREAD (SDRAM_OPERATION_MODE);
-
- /* dummy write */
- *addr = 0;
-
- /* wait for the command to complete */
- while ((GTREGREAD (SDRAM_OPERATION_MODE) & (1 << 31)) == 0);
-
- /* switch back to normal operation mode */
- GT_REG_WRITE (SDRAM_OPERATION_MODE, 0);
- check = GTREGREAD (SDRAM_OPERATION_MODE);
-
- /* unmap the bank */
- memory_map_bank (i, 0, 0);
- DP (printf ("*** MRS cycle for bank %d done ***\n", i));
- }
-
- return 0;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-static long int dram_size (long int *base, long int maxsize)
-{
- volatile long int *addr, *b = base;
- long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20) /* start test at 1M */
- for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
- cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save1 = *addr; /* save contents of addr */
- save2 = *b; /* save contents of base */
-
- *addr = cnt; /* write cnt to addr */
- *b = 0; /* put null at base */
-
- /* check at base address */
- if ((*b) != 0) {
- *addr = save1; /* restore *addr */
- *b = save2; /* restore *b */
- return (0);
- }
- val = *addr; /* read *addr */
-
- *addr = save1;
- *b = save2;
-
- if (val != cnt) {
- /* fix boundary condition.. STARTVAL means zero */
- if (cnt == STARTVAL / sizeof (long))
- cnt = 0;
- return (cnt * sizeof (long));
- }
- }
- return maxsize;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* U-Boot interface function to SDRAM init - this is where all the
- * controlling logic happens */
-phys_size_t initdram (int board_type)
-{
- ulong checkbank[4] = {[0 ... 3] = 0 };
- int bank_no;
- ulong total;
- int nhr;
- sdram_info_t dimm_info[2];
-
-
- /* first, use the SPD to get info about the SDRAM */
-
- /* check the NHR bit and skip mem init if it's already done */
- nhr = get_hid0 () & (1 << 16);
-
- if (nhr) {
- printf ("Skipping SDRAM setup due to NHR bit being set\n");
- } else {
- /* DIMM0 */
- check_dimm (0, &dimm_info[0]);
-
- /* DIMM1 */
-#ifndef CONFIG_EVB64260_750CX /* EVB64260_750CX has only 1 DIMM */
- check_dimm (1, &dimm_info[1]);
-#else /* CONFIG_EVB64260_750CX */
- memset (&dimm_info[1], 0, sizeof (sdram_info_t));
-#endif
-
- /* unmap all banks */
- memory_map_bank (0, 0, 0);
- memory_map_bank (1, 0, 0);
- memory_map_bank (2, 0, 0);
- memory_map_bank (3, 0, 0);
-
- /* Now, program the GT with the correct values */
- if (setup_sdram_common (dimm_info)) {
- printf ("Setup common failed.\n");
- }
-
- if (setup_sdram (&dimm_info[0])) {
- printf ("Setup for DIMM1 failed.\n");
- }
-
- if (setup_sdram (&dimm_info[1])) {
- printf ("Setup for DIMM2 failed.\n");
- }
-
- /* set the NHR bit */
- set_hid0 (get_hid0 () | (1 << 16));
- }
- /* next, size the SDRAM banks */
-
- total = 0;
- if (dimm_info[0].banks > 0)
- checkbank[0] = 1;
- if (dimm_info[0].banks > 1)
- checkbank[1] = 1;
- if (dimm_info[0].banks > 2)
- printf ("Error, SPD claims DIMM1 has >2 banks\n");
-
- if (dimm_info[1].banks > 0)
- checkbank[2] = 1;
- if (dimm_info[1].banks > 1)
- checkbank[3] = 1;
- if (dimm_info[1].banks > 2)
- printf ("Error, SPD claims DIMM2 has >2 banks\n");
-
- /* Generic dram sizer: works even if we don't have i2c DIMMs,
- * as long as the timing settings are more or less correct */
-
- /*
- * pass 1: size all the banks, using first bat (0-256M)
- * limitation: we only support 256M per bank due to
- * us only having 1 BAT for all DRAM
- */
- for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
- /* skip over banks that are not populated */
- if (!checkbank[bank_no])
- continue;
-
- DP (printf ("checking bank %d\n", bank_no));
-
- memory_map_bank (bank_no, 0, GB / 4);
- checkbank[bank_no] = dram_size (NULL, GB / 4);
- memory_map_bank (bank_no, 0, 0);
-
- DP (printf ("bank %d %08lx\n", bank_no, checkbank[bank_no]));
- }
-
- /*
- * pass 2: contiguously map each bank into physical address
- * space.
- */
- dimm_info[0].banks = dimm_info[1].banks = 0;
- for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
- if (!checkbank[bank_no])
- continue;
-
- dimm_info[bank_no / 2].banks++;
- dimm_info[bank_no / 2].size += checkbank[bank_no];
-
- memory_map_bank (bank_no, total, checkbank[bank_no]);
-#ifdef MAP_PCI
- memory_map_bank_pci (bank_no, total, checkbank[bank_no]);
-#endif
- total += checkbank[bank_no];
- }
-
-#ifdef CONFIG_ECC
-#ifdef CONFIG_ZUMA_V2
- /*
- * We always enable ECC when bank 2 and 3 are unpopulated
- * If we 2 or 3 are populated, we CAN'T support ECC.
- * (Zuma boards only support ECC in banks 0 and 1; assume that
- * in that configuration, ECC chips are mounted, even for stacked
- * chips)
- */
- if (checkbank[2] == 0 && checkbank[3] == 0) {
- dimm_info[0].ecc = 2;
- GT_REG_WRITE (SDRAM_TIMING,
- GTREGREAD (SDRAM_TIMING) | (1 << 13));
- /* TODO: do we have to run MRS cycles again? */
- }
-#endif /* CONFIG_ZUMA_V2 */
-
- if (GTREGREAD (SDRAM_TIMING) & (1 << 13)) {
- puts ("[ECC] ");
- }
-#endif /* CONFIG_ECC */
-
-#ifdef DEBUG
- dump_dimm_info (&dimm_info[0]);
- dump_dimm_info (&dimm_info[1]);
-#endif
- /* TODO: return at MOST 256M? */
- /* return total > GB/4 ? GB/4 : total; */
- return total;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * serial.c - serial support for the gal ev board
- */
-
-/* supports both the 16650 duart and the MPSC */
-
-#include <common.h>
-#include <command.h>
-#include <galileo/memory.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
-#include <ns16550.h>
-#endif
-
-#include "mpsc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
-const NS16550_t COM_PORTS[] = { (NS16550_t) CONFIG_SYS_NS16550_COM1,
- (NS16550_t) CONFIG_SYS_NS16550_COM2 };
-#endif
-
-#ifdef CONFIG_MPSC
-
-static int evb64260_serial_init(void)
-{
-#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-#endif
-
- mpsc_init(gd->baudrate);
-
- /* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CONFIG_SYS_INIT_CHAN1
- NS16550_reinit(COM_PORTS[0], clock_divisor);
-#endif
-#ifdef CONFIG_SYS_INIT_CHAN2
- NS16550_reinit(COM_PORTS[1], clock_divisor);
-#endif
- return (0);
-}
-
-static void evb64260_serial_putc(const char c)
-{
- if (c == '\n')
- mpsc_putchar('\r');
-
- mpsc_putchar(c);
-}
-
-static int evb64260_serial_getc(void)
-{
- return mpsc_getchar();
-}
-
-static int evb64260_serial_tstc(void)
-{
- return mpsc_test_char();
-}
-
-static void evb64260_serial_setbrg(void)
-{
- galbrg_set_baudrate(CONFIG_MPSC_PORT, gd->baudrate);
-}
-
-#else /* ! CONFIG_MPSC */
-
-static int evb64260_serial_init(void)
-{
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-
-#ifdef CONFIG_SYS_INIT_CHAN1
- (void)NS16550_init(COM_PORTS[0], clock_divisor);
-#endif
-#ifdef CONFIG_SYS_INIT_CHAN2
- (void)NS16550_init(COM_PORTS[1], clock_divisor);
-#endif
-
- return (0);
-}
-
-static void evb64260_serial_putc(const char c)
-{
- if (c == '\n')
- NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
-
- NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
-}
-
-static int evb64260_serial_getc(void)
-{
- return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-static int evb64260_serial_tstc(void)
-{
- return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-static void evb64260_serial_setbrg(void)
-{
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-
-#ifdef CONFIG_SYS_INIT_CHAN1
- NS16550_reinit(COM_PORTS[0], clock_divisor);
-#endif
-#ifdef CONFIG_SYS_INIT_CHAN2
- NS16550_reinit(COM_PORTS[1], clock_divisor);
-#endif
-}
-
-#endif /* CONFIG_MPSC */
-
-static struct serial_device evb64260_serial_drv = {
- .name = "evb64260_serial",
- .start = evb64260_serial_init,
- .stop = NULL,
- .setbrg = evb64260_serial_setbrg,
- .putc = evb64260_serial_putc,
- .puts = default_serial_puts,
- .getc = evb64260_serial_getc,
- .tstc = evb64260_serial_tstc,
-};
-
-void evb64260_serial_initialize(void)
-{
- serial_register(&evb64260_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &evb64260_serial_drv;
-}
-
-#if defined(CONFIG_CMD_KGDB)
-void
-kgdb_serial_init(void)
-{
-}
-
-void
-putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
- return;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text*)
- *(.text*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#include <common.h>
-#include <malloc.h>
-
-#if defined(CONFIG_CMD_BSP)
-#include <command.h>
-#endif
-
-#include <pci.h>
-#include <galileo/pci.h>
-#include "zuma_pbb.h"
-
-#undef DEBUG
-
-#define PAT_LO 0x00010203
-#define PAT_HI 0x04050607
-
-static PBB_DMA_REG_MAP *zuma_pbb_reg = NULL;
-static char test_buf1[2048];
-static char test_buf2[2048];
-void zuma_init_pbb(void);
-int zuma_mbox_init(void);
-int zuma_test_dma(int cmd, int size);
-
-int zuma_test_dma (int cmd, int size)
-{
- static const char *const test_legend[] = {
- "write", "verify",
- "copy", "compare",
- "write inc", "verify inc"
- };
- register int i, j;
- unsigned int p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
- unsigned int p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
- volatile unsigned int *ps = (unsigned int *) p1;
- volatile unsigned int *pd = (unsigned int *) p2;
- unsigned int funct, pat_lo = PAT_LO, pat_hi = PAT_HI;
- DMA_INT_STATUS stat;
- int ret = 0;
-
- if (!zuma_pbb_reg) {
- printf ("not initted\n");
- return -1;
- }
-
- if (cmd < 0 || cmd > 5) {
- printf ("inv cmd %d\n", cmd);
- return -1;
- }
-
- if (cmd == 2 || cmd == 3) {
- /* not implemented */
- return 0;
- }
-
- if (size <= 0 || size > 1024)
- size = 1024;
-
- size &= (~7); /* throw away bottom 3 bits */
-
- p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
- p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
-
- memset ((void *) p1, 0, size);
- memset ((void *) p2, 0, size);
-
- for (i = 0; i < size / 4; i += 2) {
- ps[i] = pat_lo;
- ps[i + 1] = pat_hi;
- if (cmd == 4 || cmd == 5) {
- unsigned char *pl = (unsigned char *) &pat_lo;
- unsigned char *ph = (unsigned char *) &pat_hi;
-
- for (j = 0; j < 4; j++) {
- pl[j] += 8;
- ph[j] += 8;
- }
- }
- }
-
- funct = (1 << 31) | (cmd << 24) | (size);
-
- zuma_pbb_reg->int_mask.pci_bits.chan0 =
- EOF_RX_FLAG | EOF_TX_FLAG | EOB_TX_FLAG;
-
- zuma_pbb_reg->debug_57 = PAT_LO; /* patl */
- zuma_pbb_reg->debug_58 = PAT_HI; /* path */
-
- zuma_pbb_reg->debug_54 = cpu_to_le32 (p1); /* src 0x01b0 */
- zuma_pbb_reg->debug_55 = cpu_to_le32 (p2); /* dst 0x01b8 */
- zuma_pbb_reg->debug_56 = cpu_to_le32 (funct); /* func, 0x01c0 */
-
- /* give DMA time to chew on things.. dont use DRAM or PCI */
- /* if you can avoid it. */
- do {
- for (i = 0; i < 1000 * 10; i++);
- } while (le32_to_cpu (zuma_pbb_reg->debug_56) & (1 << 31));
-
- stat.word = zuma_pbb_reg->status.word;
- zuma_pbb_reg->int_mask.word = 0;
-
- printf ("stat: %08x (%x)\n", stat.word, stat.pci_bits.chan0);
-
- printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
- printf ("src @%08x: %08x %08x %08x %08x\n", p1, ps[0], ps[1], ps[2],
- ps[3]);
- printf ("dst @%08x: %08x %08x %08x %08x\n", p2, pd[0], pd[1], pd[2],
- pd[3]);
- printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
-
-
- if (cmd == 0 || cmd == 4) {
- /* this is a write */
- if (!(stat.pci_bits.chan0 & EOF_RX_FLAG) || /* not done */
- (memcmp ((void *) ps, (void *) pd, size) != 0)) { /* cmp error */
- for (i = 0; i < size / 4; i += 2) {
- if ((ps[i] != pd[i]) || (ps[i + 1] != pd[i + 1])) {
- printf ("s @%p:%08x %08x\n", &ps[i], ps[i], ps[i + 1]);
- printf ("d @%p:%08x %08x\n", &pd[i], pd[i], pd[i + 1]);
- }
- }
- ret = -1;
- }
- } else {
- /* this is a verify */
- if (!(stat.pci_bits.chan0 & EOF_TX_FLAG) || /* not done */
- (stat.pci_bits.chan0 & EOB_TX_FLAG)) { /* cmp error */
- printf ("%08x: %08x %08x\n",
- le32_to_cpu (zuma_pbb_reg->debug_63),
- zuma_pbb_reg->debug_61, zuma_pbb_reg->debug_62);
- ret = -1;
- }
- }
-
- printf ("%s cmd %d, %d bytes: %s!\n", test_legend[cmd], cmd, size,
- (ret == 0) ? "PASSED" : "FAILED");
- return 0;
-}
-
-void zuma_init_pbb (void)
-{
- unsigned int iobase;
- pci_dev_t dev =
- pci_find_device (VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
-
- if (dev == -1) {
- printf ("no zuma pbb\n");
- return;
- }
-
- pci_read_config_dword (dev, PCI_BASE_ADDRESS_0, &iobase);
-
- iobase &= PCI_BASE_ADDRESS_MEM_MASK;
-
- zuma_pbb_reg = (PBB_DMA_REG_MAP *)iobase;
-
-
- if (!zuma_pbb_reg) {
- printf ("zuma pbb bar none! (hah hah, get it?)\n");
- return;
- }
-
- zuma_pbb_reg->int_mask.word = 0;
-
- printf ("pbb @ %p v%d.%d, timestamp %08x\n", zuma_pbb_reg,
- zuma_pbb_reg->version.pci_bits.rev_major,
- zuma_pbb_reg->version.pci_bits.rev_minor,
- zuma_pbb_reg->timestamp);
-
-}
-
-#if defined(CONFIG_CMD_BSP)
-
-static int last_cmd = 4; /* write increment */
-static int last_size = 64;
-
-int
-do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- zuma_init_pbb ();
- return 0;
-}
-
-int
-do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- if (argc > 1) {
- last_cmd = simple_strtoul (argv[1], NULL, 10);
- }
- if (argc > 2) {
- last_size = simple_strtoul (argv[2], NULL, 10);
- }
- zuma_test_dma (last_cmd, last_size);
- return 0;
-}
-
-int
-do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- zuma_mbox_init ();
- return 0;
-}
-
-U_BOOT_CMD(
- zinit, 1, 0, do_zuma_init_pbb,
- "init zuma pbb",
- "\n"
-);
-U_BOOT_CMD(
- zdtest, 3, 1, do_zuma_test_dma,
- "run dma test",
- "[cmd [count]]\n"
- " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes"
-);
-U_BOOT_CMD(
- zminit, 1, 0, do_zuma_init_mbox,
- "init zuma mbox",
- "\n"
-);
-
-#endif
+++ /dev/null
-#ifndef ZUMA_PBB_H
-#define ZUMA_PBB_H
-
-#define MAX_NUM_BUFFER_PER_RING 32
-
-#ifdef __BIG_ENDIAN
-#define cpu_bits _be_s_bits /* use with le32_to_cpu only */
-#define pci_bits _be_bits /* may contain swapped bytes,
- but dont need le32_to_cpu */
-#endif
-
-#ifdef __LITTLE_ENDIAN
-#define cpu_bits _le_bits
-#define pci_bits _le_bits
-#endif
-
-#define VENDOR_ID_ZUMA 0x1172
-#define DEVICE_ID_ZUMA_PBB 0x0004
-
-#define RXDBP(chan) (&sip->rx_desc[chan].base) /* ch*8 */
-#define RXDP(chan) (&sip->rx_desc[chan].current) /* ch*8 + 4 */
-#define TXDBP(chan) (&sip->tx_desc[chan].base) /* ch*8 + 64 */
-#define TXDP(chan) (&sip->tx_desc[chan].current) /* ch*8 + 68 */
-
-#define PBB_DMA_OWN_BIT 0x80000000
-#define PBB_DMA_LAST_BIT 0x40000000
-
-#define EOF_RX_FLAG 1 /* bit 0 */
-#define EOB_RX_FLAG 2 /* bit 1 */
-#define EOF_TX_FLAG 4 /* bit 2 */
-#define EOB_TX_FLAG 8 /* bit 3 */
-
-#define TX_MODE(m) (((m)&7) << 16)
-
-#define RX_DESC(i) (cs->rx_desc[i])
-#define TX_DESC(i) (cs->tx_desc[i])
-
-#define RX_CONTROL(i) (RX_DESC(i).control.word)
-#define RX_CONTROL_SIZE(i) (RX_DESC(i).control.rx.size)
-#define TX_CONTROL(i) (TX_DESC(i).control.word)
-
-#define RX_DATA_P(i) (&RX_DESC(i).ptr)
-#define TX_DATA_P(i) (&TX_DESC(i).ptr)
-
-typedef volatile unsigned char V8;
-typedef volatile unsigned short V16;
-typedef volatile unsigned int V32;
-
-/* RAM descriptor layout */
-typedef struct _tag_dma_descriptor {
- V32 ptr;
- union {
- struct {
- V32 owner:1;
- V32 last:1;
- V32 reserved0: 10;
- V32 tx_mode: 4;
-
- V32 reserved1: 5;
- V32 size: 11;
- } tx;
- struct {
- V32 owner:1;
- V32 last:1;
- V32 reserved0: 14;
-
- V32 reserved1: 5;
- V32 size: 11;
- } rx;
- V32 word;
- } control;
-} DMA_DESCRIPTOR;
-
-/*
- * NOTE: DO NOT USE structure to write non-word values... all registers
- * MUST be written 4 bytes at a time in SI version 0.
- * Non-word writes will result in "unaccessed" bytes written as zero.
- *
- * Byte reads are allowed.
- *
- * V32 pads are because the registers are spaced every 8 bytes (64 bits)
- *
- */
-
-/* NOTE!!! 4 dwords */
-typedef struct _tag_dma_descriptor_ring {
- DMA_DESCRIPTOR *base;
- V32 pad1; /* skip high dword */
- volatile DMA_DESCRIPTOR *current;
- V32 pad3; /* skip high dword */
-} DMA_DESCRIPTOR_RING;
-
-/* 1 dword */
-typedef union _tag_dma_generic {
- struct { /* byte 3 2 1 0 */
- V32 chan7:4; /* bits 31-28 */
- V32 chan6:4; /* bits 27-24 */
- V32 chan5:4; /* bits 23-20 */
- V32 chan4:4; /* bits 19-16 */
- V32 chan3:4; /* bits 15-12 */
- V32 chan2:4; /* bits 11-8 */
- V32 chan1:4; /* bits 7-4 */
- V32 chan0:4; /* bits 3-0 */
- } _be_s_bits;
- struct { /* byte 0 1 2 3 */
- V32 chan1:4; /* bits 7-4 */
- V32 chan0:4; /* bits 3-0 */
- V32 chan3:4; /* bits 15-12 */
- V32 chan2:4; /* bits 11-8 */
- V32 chan5:4; /* bits 23-20 */
- V32 chan4:4; /* bits 19-16 */
- V32 chan7:4; /* bits 31-28 */
- V32 chan6:4; /* bits 27-24 */
- } _be_bits;
- struct { /* byte 0 1 2 3 */
- V32 chan0:4; /* bits 0-3 */
- V32 chan1:4; /* bits 4-7 */
- V32 chan2:4; /* bits 8-11 */
- V32 chan3:4; /* bits 12-15 */
- V32 chan4:4; /* bits 16-19 */
- V32 chan5:4; /* bits 20-23 */
- V32 chan6:4; /* bits 24-27 */
- V32 chan7:4; /* bits 28-31 */
- } _le_bits;
- V8 byte[4];
- V32 word;
-} DMA_RXTX_ENABLE, DMA_RX_DELETE,
- DMA_INT_STATUS, DMA_INT_MASK,
- DMA_RX_LEVEL_STATUS, DMA_RX_LEVEL_INT_MASK;
-
-/* 1 dword */
-typedef union _tag_dma_rx_timer{
- struct {
- V32 res0:8; /* bits 32-24 */
- V32 res1:7; /* bits 23-17 */
- V32 enable:1; /* bit 16 */
- V32 value:16; /* bits 15-0 */
- } _be_s_bits;
- struct {
- /* crosses byte boundary. must use swap. */
- V32 s_value:16; /* bits 7-0,15-8 */
- V32 enable:1; /* bit 16 */
- V32 res1:7; /* bits 23-17 */
- V32 res0:8; /* bits 32-24 */
- } _be_bits;
- struct {
- V32 value:16; /* bits 0-15 */
- V32 enable:1; /* bit 16 */
- V32 res1:7; /* bits 17-23 */
- V32 res0:8; /* bits 24-32 */
- } _le_bits;
- V8 byte[4];
- V32 word;
-} DMA_RX_TIMER;
-
-/* NOTE!!!: 2 dwords */
-typedef struct _tag_dma_desc_level{
- union {
- struct {
- V32 res1:8; /* bits 31-24 */
- V32 res0:7; /* bits 23-17 */
- V32 write:1; /* bit 16 */
- V32 thresh:8; /* bits 15-8 */
- V32 level:8; /* bits 7-0 */
- } _be_s_bits;
- struct {
- V32 level:8; /* bits 7-0 */
- V32 thresh:8; /* bits 15-8 */
- V32 res0:7; /* bits 30-17 */
- V32 write:1; /* bit 16 */
- V32 res1:8; /* bits 31-24 */
- } _be_bits;
- struct {
- V32 level:8; /* bits 0-7 */
- V32 thresh:8; /* bits 8-15 */
- V32 write:1; /* bit 16 */
- V32 res0:7; /* bit 17-30 */
- V32 res1:8; /* bits 24-31 */
- } _le_bits;
- V8 byte[4];
- V32 word;
- } desc;
- V32 pad1;
-} DMA_DESC_LEVEL;
-
-typedef struct _tag_pbb_dma_reg_map {
- /* 0-15 (0x000-0x078) */
- DMA_DESCRIPTOR_RING rx_desc[8]; /* 4 dwords each, 128 bytes tot. */
-
- /* 16-31 (0x080-0x0f8) */
- DMA_DESCRIPTOR_RING tx_desc[8]; /* 4 dwords each, 128 bytes tot. */
-
- /* 32/33 (0x100/0x108) */
- V32 reserved_32;
- V32 pad_32;
- V32 reserved_33;
- V32 pad_33;
-
- /* 34 (0x110) */
- DMA_RXTX_ENABLE rxtx_enable;
- V32 pad_34;
-
- /* 35 (0x118) */
- DMA_RX_DELETE rx_delete;
- V32 pad_35;
-
- /* 36-38 (0x120-0x130) */
- DMA_INT_STATUS status;
- V32 pad_36;
- DMA_INT_STATUS last_status;
- V32 pad_37;
- DMA_INT_MASK int_mask;
- V32 pad_38;
-
- /* 39/40 (0x138/0x140) */
- union {
- /* NOTE!! 4 dwords */
- struct {
- V32 channel_3:8;
- V32 channel_2:8;
- V32 channel_1:8;
- V32 channel_0:8;
- V32 pad1;
- V32 channel_7:8;
- V32 channel_6:8;
- V32 channel_5:8;
- V32 channel_4:8;
- V32 pad3;
- } _be_s_bits;
- struct {
- V32 channel_0:8;
- V32 channel_1:8;
- V32 channel_2:8;
- V32 channel_3:8;
- V32 pad1;
- V32 channel_4:8;
- V32 channel_5:8;
- V32 channel_6:8;
- V32 channel_7:8;
- V32 pad3;
- } _be_bits, _le_bits;
- V8 byte[16];
- V32 word[4];
- } rx_size;
-
- /* 41/42 (0x148/0x150) */
- V32 reserved_41;
- V32 pad_41;
- V32 reserved_42;
- V32 pad_42;
-
- /* 43/44 (0x158/0x160) */
- DMA_RX_LEVEL_STATUS rx_level_status;
- V32 pad_43;
- DMA_RX_LEVEL_INT_MASK rx_level_int_mask;
- V32 pad_44;
-
- /* 45 (0x168) */
- DMA_RX_TIMER rx_timer;
- V32 pad_45;
-
- /* 46 (0x170) */
- V32 reserved_46;
- V32 pad_46;
-
- /* 47 (0x178) */
- V32 mbox_status;
- V32 pad_47;
-
- /* 48/49 (0x180/0x188) */
- V32 mbox_out;
- V32 pad_48;
- V32 mbox_in;
- V32 pad_49;
-
- /* 50 (0x190) */
- V32 config;
- V32 pad_50;
-
- /* 51/52 (0x198/0x1a0) */
- V32 c2a_ctr;
- V32 pad_51;
- V32 a2c_ctr;
- V32 pad_52;
-
- /* 53 (0x1a8) */
- union {
- struct {
- V32 rev_major:8; /* bits 31-24 */
- V32 rev_minor:8; /* bits 23-16 */
- V32 reserved:16; /* bits 15-0 */
- } _be_s_bits;
- struct {
- V32 s_reserved:16; /* bits 7-0, 15-8 */
- V32 rev_minor:8; /* bits 23-16 */
- V32 rev_major:8; /* bits 31-24 */
- } _be_bits;
- struct {
- V32 reserved:16; /* bits 0-15 */
- V32 rev_minor:8; /* bits 16-23 */
- V32 rev_major:8; /* bits 24-31 */
- } _le_bits;
- V8 byte[4];
- V32 word;
- } version;
- V32 pad_53;
-
- /* 54-59 (0x1b0-0x1d8) */
- V32 debug_54;
- V32 pad_54;
- V32 debug_55;
- V32 pad_55;
- V32 debug_56;
- V32 pad_56;
- V32 debug_57;
- V32 pad_57;
- V32 debug_58;
- V32 pad_58;
- V32 debug_59;
- V32 pad_59;
-
- /* 60 (0x1e0) */
- V32 timestamp;
- V32 pad_60;
-
- /* 61-63 (0x1e8-0x1f8) */
- V32 debug_61;
- V32 pad_61;
- V32 debug_62;
- V32 pad_62;
- V32 debug_63;
- V32 pad_63;
-
- /* 64-71 (0x200 - 0x238) */
- DMA_DESC_LEVEL rx_desc_level[8]; /* 2 dwords each, 32 bytes tot. */
-
- /* 72-98 (0x240 - 0x2f8) */
- /* reserved */
-
- /* 96-127 (0x300 - 0x3f8) */
- /* mirrors (0x100 - 0x1f8) */
-
-} PBB_DMA_REG_MAP;
-
-
-#endif /* ZUMA_PBB_H */
+++ /dev/null
-#include <common.h>
-#include <galileo/pci.h>
-#include <net.h>
-#include <pci.h>
-
-#include "zuma_pbb.h"
-#include "zuma_pbb_mbox.h"
-
-
-struct _zuma_mbox_dev zuma_mbox_dev;
-
-
-static int zuma_mbox_write(struct _zuma_mbox_dev *dev, unsigned int data)
-{
- unsigned int status, count = 0, i;
-
- status = (volatile int) le32_to_cpu(dev->sip->mbox_status);
-
- while ((status & OUT_PENDING) && count < 1000) {
- count++;
- for (i = 0; i < 1000; i++)
- ;
- status = (volatile int) le32_to_cpu(dev->sip->mbox_status);
- }
- if (count < 1000) {
- /* if SET it means msg pending */
- /* printf("mbox real write %08x\n",data); */
- dev->sip->mbox_out = cpu_to_le32(data);
- return 4;
- }
-
- printf("mbox tx timeout\n");
- return 0;
-}
-
-static int zuma_mbox_read(struct _zuma_mbox_dev *dev, unsigned int *data)
-{
- unsigned int status, count = 0, i;
-
- status = (volatile int) le32_to_cpu(dev->sip->mbox_status);
-
- while (!(status & IN_VALID) && count < 1000) {
- count++;
- for (i = 0; i < 1000; i++)
- ;
- status = (volatile int) le32_to_cpu(dev->sip->mbox_status);
- }
- if (count < 1000) {
- /* if SET it means msg pending */
- *data = le32_to_cpu(dev->sip->mbox_in);
- /*printf("mbox real read %08x\n", *data); */
- return 4;
- }
- printf("mbox rx timeout\n");
- return 0;
-}
-
-static int zuma_mbox_do_one_mailbox(unsigned int out, unsigned int *in)
-{
- int ret;
-
- ret = zuma_mbox_write(&zuma_mbox_dev, out);
- /*printf("write 0x%08x (%d bytes)\n", out, ret); */
- if (ret != 4)
- return -1;
- ret = zuma_mbox_read(&zuma_mbox_dev, in);
- /*printf("read 0x%08x (%d bytes)\n", *in, ret); */
- if (ret != 4)
- return -1;
- return 0;
-}
-
-
-#define RET_IF_FAILED(x) if ((x) == -1) return -1
-
-static int zuma_mbox_do_all_mailbox(void)
-{
- unsigned int data_in;
- unsigned short sdata_in;
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_START, &data_in));
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACL, &data_in));
- memcpy(zuma_acc_mac + 2, &data_in, 4);
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACH, &data_in));
- sdata_in = data_in & 0xffff;
- memcpy(zuma_acc_mac, &sdata_in, 2);
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_IP, &data_in));
- zuma_ip = data_in;
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_SLOT, &data_in));
- zuma_slot_bac = data_in >> 3;
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_BAUD, &data_in));
- zuma_console_baud = data_in & 0xffff;
- zuma_debug_baud = data_in >> 16;
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox
- (ZUMA_MBOXMSG_ENG_PRV_MACL, &data_in));
- memcpy(zuma_prv_mac + 2, &data_in, 4);
- RET_IF_FAILED(zuma_mbox_do_one_mailbox
- (ZUMA_MBOXMSG_ENG_PRV_MACH, &data_in));
- sdata_in = data_in & 0xffff;
- memcpy(zuma_prv_mac, &sdata_in, 2);
-
- RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_DONE, &data_in));
-
- return 0;
-}
-
-
-static void zuma_mbox_dump(void)
-{
- unsigned short s;
- unsigned int i;
-
- memcpy(&s, &zuma_acc_mac, sizeof(s));
- memcpy(&i, &zuma_acc_mac[2], sizeof(i));
- printf("ACC MAC=%04x%08x\n", s, i);
-
- memcpy(&s, &zuma_prv_mac, sizeof(s));
- memcpy(&s, &zuma_prv_mac[2], sizeof(i));
- printf("PRV MAC=%04x%08x\n", s, i);
-
- printf("slot:bac=%d:%d\n",
- (zuma_slot_bac >> 2) & 0xf,
- zuma_slot_bac & 0x3);
-
- printf("BAUD1=%d BAUD2=%d\n",
- zuma_console_baud,
- zuma_debug_baud);
-}
-
-
-static void zuma_mbox_setenv(void)
-{
- char *data, buf[32];
- unsigned char save = 0;
-
- data = getenv("baudrate");
-
- if (!data || (zuma_console_baud != simple_strtoul(data, NULL, 10))) {
- sprintf(buf, "%6d", zuma_console_baud);
- setenv("baudrate", buf);
- save = 1;
- printf("baudrate doesn't match from mbox\n");
- }
-
- ip_to_string(zuma_ip, buf);
- setenv("ipaddr", buf);
-
- sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
- zuma_prv_mac[0],
- zuma_prv_mac[1],
- zuma_prv_mac[2],
- zuma_prv_mac[3], zuma_prv_mac[4], zuma_prv_mac[5]);
- setenv("ethaddr", buf);
-
- sprintf(buf, "%02x", zuma_slot_bac);
- setenv("bacslot", buf);
-
- if (save)
- saveenv();
-}
-
-/**
- * zuma_mbox_init:
- */
-
-int zuma_mbox_init(void)
-{
- unsigned int iobase;
-
- memset(&zuma_mbox_dev, 0, sizeof(struct _zuma_mbox_dev));
-
- zuma_mbox_dev.dev =
- pci_find_device(VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
-
- if (zuma_mbox_dev.dev == -1) {
- printf("no zuma pbb\n");
- return -1;
- }
-
- pci_read_config_dword(zuma_mbox_dev.dev, PCI_BASE_ADDRESS_0, &iobase);
-
- iobase &= PCI_BASE_ADDRESS_MEM_MASK;
-
- zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *) iobase;
-
- zuma_mbox_dev.sip->int_mask.word = 0;
-
- printf("pbb @ %p v%d.%d, timestamp %08x\n", zuma_mbox_dev.sip,
- zuma_mbox_dev.sip->version.pci_bits.rev_major,
- zuma_mbox_dev.sip->version.pci_bits.rev_minor,
- zuma_mbox_dev.sip->timestamp);
-
- if (zuma_mbox_do_all_mailbox() == -1) {
- printf("mailbox failed.. no ACC?\n");
- return -1;
- }
-
- zuma_mbox_dump();
-
- zuma_mbox_setenv();
-
- return 0;
-}
+++ /dev/null
-#define IN_VALID 1
-#define OUT_PENDING 2
-
-enum {
- ZUMA_MBOXMSG_DONE,
- ZUMA_MBOXMSG_MACL,
- ZUMA_MBOXMSG_MACH,
- ZUMA_MBOXMSG_IP,
- ZUMA_MBOXMSG_SLOT,
- ZUMA_MBOXMSG_RESET,
- ZUMA_MBOXMSG_BAUD,
- ZUMA_MBOXMSG_START,
- ZUMA_MBOXMSG_ENG_PRV_MACL,
- ZUMA_MBOXMSG_ENG_PRV_MACH,
-
- MBOXMSG_LAST
-};
-
-struct zuma_mailbox_info {
- unsigned char acc_mac[6];
- unsigned char prv_mac[6];
- unsigned int ip;
- unsigned int slot_bac;
- unsigned int console_baud;
- unsigned int debug_baud;
-};
-
-struct _zuma_mbox_dev {
- pci_dev_t dev;
- PBB_DMA_REG_MAP *sip;
- struct zuma_mailbox_info mailbox;
-};
-
-#define zuma_prv_mac zuma_mbox_dev.mailbox.prv_mac
-#define zuma_acc_mac zuma_mbox_dev.mailbox.acc_mac
-#define zuma_ip zuma_mbox_dev.mailbox.ip
-#define zuma_slot_bac zuma_mbox_dev.mailbox.slot_bac
-#define zuma_console_baud zuma_mbox_dev.mailbox.console_baud
-#define zuma_debug_baud zuma_mbox_dev.mailbox.debug_baud
-
-
-extern struct _zuma_mbox_dev zuma_mbox_dev;
-extern int zuma_mbox_init (void);
+++ /dev/null
-if TARGET_MPC7448HPC2
-
-config SYS_BOARD
- default "mpc7448hpc2"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "mpc7448hpc2"
-
-endif
+++ /dev/null
-MPC7448HPC2 BOARD
-M: Roy Zang <tie-fei.zang@freescale.com>
-S: Maintained
-F: board/freescale/mpc7448hpc2/
-F: include/configs/mpc7448hpc2.h
-F: configs/mpc7448hpc2_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := mpc7448hpc2.o tsi108_init.o
-obj-y += asm_init.o
+++ /dev/null
-Freescale MPC7448hpc2 (Taiga) board
-===================================
-
-Created 08/11/2006 Roy Zang
---------------------------
-MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference
-design, which is optimized for high speed throughput between the processor and
-the memory, disk drive and Ethernet port subsystems.
-
-MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
-used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
-chassis.
-
-Building U-Boot
-------------------
-The mpc7448hpc2 code base is known to compile using:
- Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
-
- $ make mpc7448hpc2_config
- Configuring for mpc7448hpc2 board...
-
- $ make
-
-Memory Map
-----------
-
-The memory map is setup for Linux to operate properly.
-
-The mapping is:
-
- Range Start Range End Definition Size
-
- 0x0000_0000 0x7fff_ffff DDR 2G
- 0xe000_0000 0xe7ff_ffff PCI Memory 128M
- 0xfa00_0000 0xfaff_ffff PCI IO 16M
- 0xfb00_0000 0xfbff_ffff PCI Config 16M
- 0xfc00_0000 0xfc0f_ffff NVRAM/CADMUS 1M
- 0xfe00_0000 0xfeff_ffff PromJet 16M
- 0xff00_0000 0xff80_0000 FLASH (boot flash) 8M
- 0xff80_0000 0xffff_ffff FLASH (second half flash) 8M
-
-Using Flash
------------
-
-The MPC7448hpc2 board has two "banks" of flash, each 8MB in size
-(2^23 = 0x00800000).
-
-Note: the "bank" here refers to half of the flash. In fact, there is only one
-bank of flash, which is divided into low and high half. Each is controlled by
-the most significant bit of the address bus. The so called "bank" is only for
-convenience.
-
-There is a switch which allows the "bank" to be selected. The switch
-settings for updating flash are given below.
-
-The u-boot commands for copying the boot-bank into the secondary bank are
-as follows:
-
- erase ff800000 ff880000
- cp.b ff000000 ff800000 80000
-
-U-boot commands for downloading an image via tftp and flashing
-it into the secondary bank:
-
- tftp 10000 <u-boot.bin.image>
- erase ff000000 ff080000
- cp.b 10000 ff000000 80000
-
-After copying the image into the second bank of flash, be sure to toggle
-SW3[4] on board before resetting the board in order to set the
-secondary bank as the boot-bank.
-
-Board Switches
-----------------------
-
-Most switches on the board should not be changed. The most frequent
-user-settable switches on the board are used to configure
-the flash banks and determining the PCI frequency.
-
-SW1[1-5]: Processor core voltage
-
- 12345 Core Voltage
- -----
- SW1=01111 1.000V.
- SW1=01101 1.100V.
- SW1=01011 1.200V.
- SW1=01001 1.300V only for MPC7447A.
-
-
-SW2[1-6]: CPU core frequency
-
- CPU Core Frequency (MHz)
- Bus Frequency
- 123456 100 133 167 200 Ratio
-
- ------
- SW2=101100 500 667 833 1000 5x
- SW2=100100 550 733 917 1100 5.5x
- SW2=110100 600 800 1000 1200 6x
- SW2=010100 650 866 1083 1300 6.5x
- SW2=001000 700 930 1167 1400 7x
- SW2=000100 750 1000 1250 1500 7.5x
- SW2=110000 800 1066 1333 1600 8x
- SW2=011000 850 1333 1417 1700 8.5x only for MPC7447A
- SW2=011110 900 1200 1500 1800 9x
-
-This table shows only a subset of available frequency options; see the CPU
-hardware specifications for more information.
-
-SW2[7-8]: Bus Protocol and CPU Reset Option
-
- 7
- -
- SW2=0 System bus uses MPX bus protocol
- SW2=1 System bus uses 60x bus protocol
-
- 8
- -
- SW2=0 TSI108 can cause CPU reset
- SW2=1 TSI108 can not cause CPU reset
-
-SW3[1-8] system options
-
- 123
- ---
- SW3=xxx Connected to GPIO[0:2] on TSI108
-
- 4
- -
- SW3=0 CPU boots from low half of flash
- SW3=1 CPU boots from high half of flash
-
- 5
- -
- SW3=0 SATA and slot2 connected to PCI bus
- SW3=1 Only slot1 connected to PCI bus
-
- 6
- -
- SW3=0 USB connected to PCI bus
- SW3=1 USB disconnected from PCI bus
-
- 7
- -
- SW3=0 Flash is write protected
- SW3=1 Flash is NOT write protected
-
- 8
- -
- SW3=0 CPU will boot from flash
- SW3=1 CPU will boot from PromJet
-
-SW4[1-3]: System bus frequency
-
- Bus Frequency (MHz)
- ---
- SW4=010 183
- SW4=011 100
- SW4=100 133
- SW4=101 166 only for MPC7447A
- SW4=110 200 only for MPC7448
- others reserved
-
-SW4[4-6]: DDR2 SDRAM frequency
-
- Bus Frequency (MHz)
- ---
- SW4=000 external clock
- SW4=011 system clock
- SW4=100 133
- SW4=101 166
- SW4=110 200
- others reserved
-
-SW4[7-8]: PCI/PCI-X frequency control
- 7
- -
- SW4=0 PCI/PCI-X bus operates normally
- SW4=1 PCI bus forced to PCI-33 mode
-
- 8
- -
- SW4=0 PCI-X mode at 133 MHz allowed
- SW4=1 PCI-X mode limited to 100 MHz
+++ /dev/null
-/*
- * (C) Copyright 2004-05; Tundra Semiconductor Corp.
- *
- * Added automatic detect of SDC settings
- * Copyright (c) 2005 Freescale Semiconductor, Inc.
- * Maintainer tie-fei.zang@freescale.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * FILENAME: asm_init.s
- *
- * Originator: Alex Bounine
- *
- * DESCRIPTION:
- * Initialization code for the Tundra Tsi108 bridge chip
- *
- */
-
-#include <config.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-
-#include <tsi108.h>
-
-/*
- * Build Configuration Options
- */
-
-/* #define DISABLE_PBM disables usage of PB Master */
-/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */
-/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */
-
-/*
- * Hardcoded SDC settings
- */
-
-#ifdef SDC_HARDCODED_INIT
-
-/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */
-
-#define VAL_SD_REFRESH (0x61A)
-#define VAL_SD_TIMING (0x0308336b)
-#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */
-#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */
-#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */
-#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */
-
-#endif /* SDC_HARDCODED_INIT */
-
-/*
- CPU Configuration:
-
- CPU Address and Data Parity enables.
-
-#define CPU_AP
-#define CPU_DP
-*/
-
-/*
- * Macros
- * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
- * expected to work correctly for the CSR space within 32KB range.
- *
- * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
- * These macros are absolutely identical except their names. This difference
- * is provided intentionally for better readable code.
- */
-
-#define LOAD_PTR(reg,const32) \
- addis reg,r0,const32@h; ori reg,reg,const32@l
-
-#define LOAD_U32(reg,const32) \
- addis reg,r0,const32@h; ori reg,reg,const32@l
-
-/* LOADMEM initializes a register with the contents of a specified 32-bit
- * memory location, usually a CSR value.
- */
-
-#define LOAD_MEM(reg,addr32) \
- addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
-
-#ifndef SDC_HARDCODED_INIT
-sdc_clk_sync:
- /* MHz: 0,0,183,100,133,167,200,233 */
- .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */
-#endif
-
-/*
- * board_asm_init() - early initialization function. Coded to be portable to
- * dual-CPU configuration.
- * Checks CPU number and performs board HW initialization if called for CPU0.
- * Registers used: r3,r4,r5,r6,r19,r29
- *
- * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
- * and the rest of the board. Current implementation demonstrates two
- * possible ways to identify CPU number:
- * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
- * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
- */
-
- .globl board_asm_init
-board_asm_init:
- mflr r19 /* Save LR to be able return later. */
- bl icache_enable /* Enable icache to reduce reads from flash. */
-
-/* Initialize pointer to Tsi108 register space */
-
- LOAD_PTR(r29,CONFIG_SYS_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
- ori r4,r29,TSI108_PB_REG_OFFSET
-
-/* Check Processor Version Number */
-
- mfspr r3, PVR
- rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */
-
- cmpli 0,0,r3,0x8000 /* MPC74xx */
- bne cont_brd_init
-
- /*
- * For MPC744x/5x enable extended BATs[4-7]
- * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
- * to disable prefetch
- */
-
- mfspr r5, HID0
- oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */
- ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */
- mtspr HID0, r5
- isync
- sync
-
- /* Adding code to disable external interventions in MPX bus mode */
- mfspr r3, 1014
- oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */
- mtspr 1014, r3
- isync
- sync
-
- /* Sri: code to enable FP unit */
- mfmsr r3
- ori r3, r3, 0x2000
- mtmsr r3
- isync
- sync
-
- /* def CONFIG_DUAL_CPU
- * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
- */
-#if(1)
- mfspr r3,1014 /* read MSSCR0 */
- rlwinm. r3,r3,27,31,31 /* get processor ID number */
- mtspr SPRN_PIR,r3 /* Save CPU ID */
- sync
- bne init_done
- b do_tsi108_init
-
-cont_brd_init:
-
- /* An alternative method of checking the processor number (in addition
- * to configuration using MSSCR0[ID] bit on MPC74xx).
- * Good for IBM PPC750FX/GX.
- */
-
- lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */
- rlwinm. r3,r3,24,31,31 /* get processor ID number */
- bne init_done
-#else
-
-cont_brd_init:
-
-#endif /* CONFIG_DUAL_CPU */
-
- /* Initialize Tsi108 chip */
-
-do_tsi108_init:
-
- /*
- * Adjust HLP/Flash parameters. By default after reset the HLP port is
- * set to support slow devices. Better performance can be achived when
- * an optimal parameters are used for specific EPROM device.
- * NOTE: This should be performed ASAP for the emulation platform
- * because it has 5MHz HLP clocking.
- */
-
-#ifdef CONFIG_TSI108EMU
- ori r4,r29,TSI108_HLP_REG_OFFSET
- LOAD_U32(r5,0x434422c0)
- stw r5,0x08(r4) /* set HLP B0_CTRL0 */
- sync
- LOAD_U32(r5,0xd0012000)
- stw r5,0x0c(r4) /* set HLP B0_CTRL1 */
- sync
-#endif
-
- /* Initialize PB interface. */
-
- ori r4,r29,TSI108_PB_REG_OFFSET
-
-#if (CONFIG_SYS_TSI108_CSR_BASE != CONFIG_SYS_TSI108_CSR_RST_BASE)
- /* Relocate (if required) Tsi108 registers. Set new value for
- * PB_REG_BAR:
- * Note we are in the 32-bit address mode.
- */
- LOAD_U32(r5,(CONFIG_SYS_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
- stw r5,PB_REG_BAR(r4)
- andis. r29,r5,0xFFFF
- sync
- ori r4,r29,TSI108_PB_REG_OFFSET
-#endif
-
- /* Set PB Slave configuration register */
-
- LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */
- lwz r3, PB_RSR(r4) /* get PB bus mode */
- xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
- rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */
- stw r5,PB_SCR(r4)
- sync
-
- /* Configure PB Arbiter */
-
- lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
- li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */
-#ifdef DISABLE_PBM
- ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */
-#endif
- andc r5,r5,r3 /* Clear the masked bit fields */
- ori r5,r5,0x0001 /* Set pipeline depth */
- stw r5,PB_ARB_CTRL(r4)
-
-#if (0) /* currently using the default settings for PBM after reset */
- LOAD_U32(r5,0x) /* value for PB_MCR */
- stw r5,PB_MCR(r4)
- sync
-
- LOAD_U32(r5,0x) /* value for PB_MCMD */
- stw r5,PB_MCMD(r4)
- sync
-#endif
-
- /* Disable or enable PVT based on processor bus frequency
- * 1. Read CG_PWRUP_STATUS register field bits 18,17,16
- * 2. See if the value is < or > 133mhz (18:16 = 100)
- * 3. If > enable PVT
- */
-
- LOAD_U32(r3,0xC0002234)
- lwz r3,0(r3)
- rlwinm r3,r3,16,29,31
-
- cmpi 0,0,r3,0x0004
- bgt sdc_init
-
-#ifndef CONFIG_TSI108EMU
- /* FIXME: Disable PB calibration control for any real Tsi108 board */
- li r5,0x0101 /* disable calibration control */
- stw r5,PB_PVT_CTRL2(r4)
- sync
-#endif
-
- /* Initialize SDRAM controller. */
-
-sdc_init:
-
-#ifndef SDC_HARDCODED_INIT
- /* get SDC clock prior doing sdram controller autoconfig */
- ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */
- lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */
- rlwinm r3,r3,12,29,31 /* r3 - SD clk */
- lis r5,sdc_clk_sync@h
- ori r5,r5,sdc_clk_sync@l
- /* Sri: At this point check if r3 = 001. If yes,
- * the memory frequency should be same as the
- * MPX bus frequency
- */
- cmpi 0,0,r3,0x0001
- bne get_nsec
- lwz r6, CG_PWRUP_STATUS(r4)
- rlwinm r6,r6,16,29,31
- mr r3,r6
-
-get_nsec:
- rlwinm r3,r3,2,0,31
- lwzx r9,r5,r3 /* get SD clk rate in nSec */
- /* ATTN: r9 will be used by SPD routine */
-#endif /* !SDC_HARDCODED_INIT */
-
- ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
-
- /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
-
- LOAD_U32(r5,0x00)
- stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
-#ifdef ENABLE_SDRAM_ECC
- li r5, 0x01
-#endif /* ENABLE_SDRAM_ECC */
- stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */
- sync
-
-#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */
-
- /* First read the CG_PWRUP_STATUS register to get the
- * memory speed from bits 22,21,20
- */
-
- LOAD_U32(r3,0xC0002234)
- lwz r3,0(r3)
- rlwinm r3,r3,12,29,31
-
- /* Now first check for 166, then 200, or default */
-
- cmpi 0,0,r3,0x0005
- bne check_for_200mhz
-
- /* set values for 166 Mhz memory speed
- * Set refresh rate and timing parameters
- */
- LOAD_U32(r5,0x00000515)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,0x03073368)
- stw r5,SD_TIMING(r4)
- sync
-
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
-
- b sdc_init_done
-
-check_for_200mhz:
-
- cmpi 0,0,r3,0x0006
- bne set_default_values
-
- /* set values for 200Mhz memory speed
- * Set refresh rate and timing parameters
- */
- LOAD_U32(r5,0x0000061a)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,0x03083348)
- stw r5,SD_TIMING(r4)
- sync
-
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
-
- b sdc_init_done
-
-set_default_values:
-
- /* Set refresh rate and timing parameters */
- LOAD_U32(r5,VAL_SD_REFRESH)
- stw r5,SD_REFRESH(r4)
- LOAD_U32(r5,VAL_SD_TIMING)
- stw r5,SD_TIMING(r4)
- sync
-
- /* Initialize DIMM0 control and BAR registers */
- LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D0_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D0_BAR)
- stw r5,SD_D0_BAR(r4)
- sync
-
- /* Initialize DIMM1 control and BAR registers
- * (same as dimm 0, next 512MB, disabled)
- */
- LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */
-#ifdef SDC_AUTOPRECH_EN
- oris r5,r5,0x0001 /* set auto precharge EN bit */
-#endif
- stw r5,SD_D1_CTRL(r4)
- LOAD_U32(r5,VAL_SD_D1_BAR)
- stw r5,SD_D1_BAR(r4)
- sync
-#else /* !SDC_HARDCODED_INIT */
- bl tsi108_sdram_spd /* automatically detect SDC settings */
-#endif /* SDC_HARDCODED_INIT */
-
-sdc_init_done:
-
-#ifdef DISABLE_PBM
- LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */
-#else
- LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */
-#endif /* DISABLE_PBM */
-
-#ifdef CONFIG_TSI108EMU
- oris r5,r5,0x0010 /* set EMULATION_MODE bit */
-#endif
-
- stw r5,SD_CTRL(r4)
- eieio
- sync
-
- /* Enable SDRAM access */
-
- oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */
- stw r5,SD_CTRL(r4)
- sync
-
-wait_init_complete:
- lwz r5,SD_STATUS(r4)
- andi. r5,r5,0x0001
- /* wait until SDRAM initialization is complete */
- beq wait_init_complete
-
- /* Map SDRAM into the processor bus address space */
-
- ori r4,r29,TSI108_PB_REG_OFFSET
-
- /* Setup BARs associated with direct path PB<->SDRAM */
-
- /* PB_SDRAM_BAR1:
- * provides a direct path to the main system memory (cacheable SDRAM)
- */
-
- /* BA=0,Size=512MB, ENable, No Addr.Translation */
- LOAD_U32(r5, 0x00000011)
- stw r5,PB_SDRAM_BAR1(r4)
- sync
-
- /* Make sure that PB_SDRAM_BAR1 decoder is set
- * (to allow following immediate read from SDRAM)
- */
- lwz r5,PB_SDRAM_BAR1(r4)
- sync
-
- /* PB_SDRAM_BAR2:
- * provides non-cacheable alias (via the direct path) to main
- * system memory.
- * Size = 512MB, ENable, Addr.Translation - ON,
- * BA = 0x0_40000000, TA = 0x0_00000000
- */
-
- LOAD_U32(r5, 0x40010011)
- stw r5,PB_SDRAM_BAR2(r4)
- sync
-
- /* Make sure that PB_SDRAM_BAR2 decoder is set
- * (to allow following immediate read from SDRAM)
- */
- lwz r5,PB_SDRAM_BAR2(r4)
- sync
-
-init_done:
-
- /* All done. Restore LR and return. */
- mtlr r19
- blr
-
-#if (0)
- /*
- * init_cpu1
- * This routine enables CPU1 on the dual-processor system.
- * Now there is only one processor in the system
- */
-
- .global enable_cpu1
-enable_cpu1:
-
- lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */
- addi r3,r3,Tsi108_Base@l
- lwz r3,0(r3) /* R3 = CSR Base Addr */
- ori r4,r3,TSI108_PB_REG_OFFSET
- lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */
- ori r3,r3,0x0200 /* Set M1_EN bit */
- stw r3,PB_ARB_CTRL(r4)
-
- blr
-#endif
-
- /*
- * enable_EI
- * Enable CPU core external interrupt
- */
-
- .global enable_EI
-enable_EI:
- mfmsr r3
- ori r3,r3,0x8000 /* set EE bit */
- mtmsr r3
- blr
-
- /*
- * disable_EI
- * Disable CPU core external interrupt
- */
-
- .global disable_EI
-disable_EI:
- mfmsr r3
- li r4,-32768 /* aka "li r4,0x8000" */
- andc r3,r3,r4 /* clear EE bit */
- mtmsr r3
- blr
-
-#ifdef ENABLE_SDRAM_ECC
- /* enables SDRAM ECC */
-
- .global enable_ECC
-enable_ECC:
- ori r4,r29,TSI108_SD_REG_OFFSET
- lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */
- ori r3,r3,0x0001 /* Set ECC_EN bit */
- stw r3,SD_ECC_CTRL(r4)
- blr
-
- /*
- * clear_ECC_err
- * Clears all pending SDRAM ECC errors
- * (normally after SDRAM scrubbing/initialization)
- */
-
- .global clear_ECC_err
-clear_ECC_err:
- ori r4,r29,TSI108_SD_REG_OFFSET
- ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */
- stw r3,SD_INT_STATUS(r4)
- blr
-
-#endif /* ENABLE_SDRAM_ECC */
-
-#ifndef SDC_HARDCODED_INIT
-
- /* SDRAM SPD Support */
-#define SD_I2C_CTRL1 (0x400)
-#define SD_I2C_CTRL2 (0x404)
-#define SD_I2C_RD_DATA (0x408)
-#define SD_I2C_WR_DATA (0x40C)
-
- /*
- * SDRAM SPD Support Macros
- */
-
-#define SPD_DIMM0 (0x00000100)
-#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */
-
-#define SPD_RDIMM (0x01)
-#define SPD_UDIMM (0x02)
-
-#define SPD_CAS_3 0x8
-#define SPD_CAS_4 0x10
-#define SPD_CAS_5 0x20
-
-#define ERR_NO_DIMM_FOUND (0xdb0)
-#define ERR_TRAS_FAIL (0xdb1)
-#define ERR_TRCD_FAIL (0xdb2)
-#define ERR_TRP_FAIL (0xdb3)
-#define ERR_TWR_FAIL (0xdb4)
-#define ERR_UNKNOWN_PART (0xdb5)
-#define ERR_NRANK_INVALID (0xdb6)
-#define ERR_DIMM_SIZE (0xdb7)
-#define ERR_ADDR_MODE (0xdb8)
-#define ERR_RFRSH_RATE (0xdb9)
-#define ERR_DIMM_TYPE (0xdba)
-#define ERR_CL_VALUE (0xdbb)
-#define ERR_TRFC_FAIL (0xdbc)
-
-/* READ_SPD requirements:
- * byte - byte address in SPD device (0 - 255)
- * r3 = will return data read from I2C Byte location
- * r4 - unchanged (SDC base addr)
- * r5 - clobbered in routine (I2C status)
- * r10 - number of DDR slot where first SPD device is detected
- */
-
-#define READ_SPD(byte_num) \
- addis r3, 0, byte_num@l; \
- or r3, r3, r10; \
- ori r3, r3, 0x0A; \
- stw r3, SD_I2C_CTRL1(r4); \
- li r3, I2C_CNTRL2_START; \
- stw r3, SD_I2C_CTRL2(r4); \
- eieio; \
- sync; \
- li r3, 0x100; \
-1:; \
- addic. r3, r3, -1; \
- bne 1b; \
-2:; \
- lwz r5, SD_I2C_CTRL2(r4); \
- rlwinm. r3,r5,0,23,23; \
- bne 2b; \
- rlwinm. r3,r5,0,3,3; \
- lwz r3,SD_I2C_RD_DATA(r4)
-
-#define SPD_MIN_RFRSH (0x80)
-#define SPD_MAX_RFRSH (0x85)
-
-refresh_rates: /* in nSec */
- .long 15625 /* Normal (0x80) */
- .long 3900 /* Reduced 0.25x (0x81) */
- .long 7800 /* Reduced 0.5x (0x82) */
- .long 31300 /* Extended 2x (0x83) */
- .long 62500 /* Extended 4x (0x84) */
- .long 125000 /* Extended 8x (0x85) */
-
-/*
- * tsi108_sdram_spd
- *
- * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data
- * Uses registers: r4 - SDC base address (not changed)
- * r9 - SDC clocking period in nSec
- * Changes registers: r3,r5,r6,r7,r8,r10,r11
- */
-
-tsi108_sdram_spd:
-
- li r10,SPD_DIMM0
- xor r11,r11,r11 /* DIMM Base Address: starts from 0 */
-
-do_first_dimm:
-
- /* Program Refresh Rate Register */
-
- READ_SPD(12) /* get Refresh Rate */
- beq check_next_slot
- li r5, ERR_RFRSH_RATE
- cmpi 0,0,r3,SPD_MIN_RFRSH
- ble spd_fail
- cmpi 0,0,r3,SPD_MAX_RFRSH
- bgt spd_fail
- addi r3,r3,-SPD_MIN_RFRSH
- rlwinm r3,r3,2,0,31
- lis r5,refresh_rates@h
- ori r5,r5,refresh_rates@l
- lwzx r5,r5,r3 /* get refresh rate in nSec */
- divwu r5,r5,r9 /* calculate # of SDC clocks */
- stw r5,SD_REFRESH(r4) /* Set refresh rate */
- sync
-
- /* Program SD Timing Register */
-
- li r7, 0 /* clear r7 prior parameter collection */
-
- READ_SPD(20) /* get DIMM type: Registered or Unbuffered */
- beq spd_read_fail
- li r5, ERR_DIMM_TYPE
- cmpi 0,0,r3,SPD_UDIMM
- beq do_cl
- cmpi 0,0,r3,SPD_RDIMM
- bne spd_fail
- oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */
-
-do_cl:
- READ_SPD(18) /* Get CAS Latency */
- beq spd_read_fail
- li r5,ERR_CL_VALUE
- andi. r6,r3,SPD_CAS_3
- beq cl_4
- li r6,3
- b set_cl
-cl_4:
- andi. r6,r3,SPD_CAS_4
- beq cl_5
- li r6,4
- b set_cl
-cl_5:
- andi. r6,r3,SPD_CAS_5
- beq spd_fail
- li r6,5
-set_cl:
- rlwimi r7,r6,24,5,7
-
- READ_SPD(30) /* Get tRAS */
- beq spd_read_fail
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
- beq set_tras
- addi r6,r6,1
-set_tras:
- li r5,ERR_TRAS_FAIL
- cmpi 0,0,r6,0x0F /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,16,12,15
-
- READ_SPD(29) /* Get tRCD */
- beq spd_read_fail
- /* right shift tRCD by 2 bits as per DDR2 spec */
- rlwinm r3,r3,30,2,31
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
- beq set_trcd
- addi r6,r6,1
-set_trcd:
- li r5,ERR_TRCD_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,12,17,19
-
- READ_SPD(27) /* Get tRP value */
- beq spd_read_fail
- rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
- beq set_trp
- addi r6,r6,1
-set_trp:
- li r5,ERR_TRP_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,8,21,23
-
- READ_SPD(36) /* Get tWR value */
- beq spd_read_fail
- rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
- beq set_twr
- addi r6,r6,1
-set_twr:
- addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */
- li r5,ERR_TWR_FAIL
- cmpi 0,0,r6,0x07 /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,5,24,26
-
- READ_SPD(42) /* Get tRFC */
- beq spd_read_fail
- li r5, ERR_TRFC_FAIL
- /* Tsi108 spec: tRFC=(tRFC + 1)/2 */
- addi r3,r3,1
- rlwinm. r3,r3,31,1,31 /* divide by 2 */
- beq spd_fail
- divwu r6,r3,r9
- mullw r8,r6,r9
- subf. r8,r8,r3
- beq set_trfc
- addi r6,r6,1
-set_trfc:
- cmpi 0,0,r6,0x1F /* max supported value */
- bgt spd_fail
- rlwimi r7,r6,0,27,31
-
- stw r7,SD_TIMING(r4)
- sync
-
- /*
- * The following two registers are set on per-DIMM basis.
- * The SD_REFRESH and SD_TIMING settings are common for both DIMMS
- */
-
-do_each_dimm:
-
- /* Program SDRAM DIMM Control Register */
-
- li r7, 0 /* clear r7 prior parameter collection */
-
- READ_SPD(13) /* Get Primary SDRAM Width */
- beq spd_read_fail
- cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */
- beq do_nbank
- oris r7,r7,0x0010 /* Set MEM_WIDTH bit */
-
-do_nbank:
- READ_SPD(17) /* Get Number of banks on SDRAM device */
- beq spd_read_fail
- /* Grendel only distinguish betw. 4 or 8-bank memory parts */
- li r5,ERR_UNKNOWN_PART /* non-supported memory part */
- cmpi 0,0,r3,4
- beq do_nrank
- cmpi 0,0,r3,8
- bne spd_fail
- ori r7,r7,0x1000
-
-do_nrank:
- READ_SPD(5) /* Get # of Ranks */
- beq spd_read_fail
- li r5,ERR_NRANK_INVALID
- andi. r6,r3,0x7 /* Use bits [2..0] only */
- beq do_addr_mode
- cmpi 0,0,r6,1
- bgt spd_fail
- rlwimi r7,r6,8,23,23
-
-do_addr_mode:
- READ_SPD(4) /* Get # of Column Addresses */
- beq spd_read_fail
- li r5, ERR_ADDR_MODE
- andi. r3,r3,0x0f /* cut off reserved bits */
- cmpi 0,0,r3,8
- ble spd_fail
- cmpi 0,0,r3,15
- bgt spd_fail
- addi r6,r3,-8 /* calculate ADDR_MODE parameter */
- rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */
-
-set_dimm_ctrl:
-#ifdef SDC_AUTOPRECH_EN
- oris r7,r7,0x0001 /* set auto precharge EN bit */
-#endif
- ori r7,r7,1 /* set ENABLE bit */
- cmpi 0,0,r10,SPD_DIMM0
- bne 1f
- stw r7,SD_D0_CTRL(r4)
- sync
- b set_dimm_bar
-1:
- stw r7,SD_D1_CTRL(r4)
- sync
-
-
- /* Program SDRAM DIMMx Base Address Register */
-
-set_dimm_bar:
- READ_SPD(5) /* get # of Ranks */
- beq spd_read_fail
- andi. r7,r3,0x7
- addi r7,r7,1
- READ_SPD(31) /* Read DIMM rank density */
- beq spd_read_fail
- rlwinm r5,r3,27,29,31
- rlwinm r6,r3,3,24,28
- or r5,r6,r5 /* r5 = Normalized Rank Density byte */
- lis r8, 0x0080 /* 128MB >> 4 */
- mullw r8,r8,r5 /* r8 = (rank_size >> 4) */
- mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */
- neg r7,r8
- rlwinm r7,r7,28,4,31
- or r7,r7,r11 /* set ADDR field */
- rlwinm r8,r8,12,20,31
- add r11,r11,r8 /* set Base Addr for next DIMM */
-
- cmpi 0,0,r10,SPD_DIMM0
- bne set_dimm1_size
- stw r7,SD_D0_BAR(r4)
- sync
- li r10,SPD_DIMM1
- READ_SPD(0)
- bne do_each_dimm
- b spd_done
-
-set_dimm1_size:
- stw r7,SD_D1_BAR(r4)
- sync
-spd_done:
- blr
-
-check_next_slot:
- cmpi 0,0,r10,SPD_DIMM1
- beq spd_read_fail
- li r10,SPD_DIMM1
- b do_first_dimm
-spd_read_fail:
- ori r3,r0,0xdead
- b err_hung
-spd_fail:
- li r3,0x0bad
- sync
-err_hung: /* hang here for debugging */
- nop
- nop
- b err_hung
-
-#endif /* !SDC_HARDCODED_INIT */
+++ /dev/null
-#
-# Copyright (c) 2005 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
+++ /dev/null
-/*
- * (C) Copyright 2005 Freescale Semiconductor, Inc.
- *
- * Roy Zang <tie-fei.zang@freescale.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * modifications for the Tsi108 Emul Board by avb@Tundra
- */
-
-/*
- * board support/init functions for the
- * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <fdt_support.h>
-#include <netdev.h>
-
-#undef DEBUG
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void tsi108_init_f (void);
-
-int display_mem_map (void);
-
-void after_reloc (ulong dest_addr)
-{
- /*
- * Jump to the main U-Boot board init code
- */
- board_init_r ((gd_t *) gd, dest_addr);
- /* NOTREACHED */
-}
-
-/*
- * Check Board Identity:
- * report board type
- */
-
-int checkboard (void)
-{
- int l_type = 0;
-
- printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
- return (l_type);
-}
-
-/*
- * Read Processor ID:
- *
- * report calling processor number
- */
-
-int read_pid (void)
-{
- return 0; /* we are on single CPU platform for a while */
-}
-
-long int dram_size (int board_type)
-{
- return 0x20000000; /* 256M bytes */
-}
-
-phys_size_t initdram (int board_type)
-{
- return dram_size (board_type);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- return 0;
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#if defined(CONFIG_TSI108_ETH)
- rc = tsi108_eth_initialize(bis);
-#endif
- return rc;
-}
+++ /dev/null
-/*****************************************************************************
- * (C) Copyright 2003; Tundra Semiconductor Corp.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *****************************************************************************/
-
-/*----------------------------------------------------------------------------
- * FILENAME: tsi108_init.c
- *
- * Originator: Alex Bounine
- *
- * DESCRIPTION:
- * Initialization code for the Tundra Tsi108 bridge chip
- *---------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <config.h>
-#include <version.h>
-#include <asm/processor.h>
-#include <tsi108.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void mpicInit (int verbose);
-
-/*
- * Configuration Options
- */
-
-typedef struct {
- ulong upper;
- ulong lower;
-} PB2OCN_LUT_ENTRY;
-
-PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
- /* 0 - 7 */
- {0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */
-
- /* 8 - 15 */
- {0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */
-
- /* 16 - 23 */
- {0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */
- /* 24 - 31 */
- {0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */
- {0x00000000, 0x00000241}, /* PBA=0xFA00_0000 -> PCI/X PCI I/O (Byte-Swap + Translate) */
- {0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X PCI Config (Byte-Swap) */
-
- {0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */
- {0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */
- {0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */
- {0x00000000, 0x00000240} /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
-};
-
-#ifdef CONFIG_SYS_CLK_SPREAD
-typedef struct {
- ulong ctrl0;
- ulong ctrl1;
-} PLL_CTRL_SET;
-
-/*
- * Clock Generator SPLL0 initialization values
- * PLL0 configuration table for various PB_CLKO freq.
- * Uses pre-calculated values for Fs = 30 kHz, D = 0.5%
- * Fout depends on required PB_CLKO. Based on Fref = 33 MHz
- */
-
-static PLL_CTRL_SET pll0_config[8] = {
- {0x00000000, 0x00000000}, /* 0: bypass */
- {0x00000000, 0x00000000}, /* 1: reserved */
- {0x00430044, 0x00000043}, /* 2: CG_PB_CLKO = 183 MHz */
- {0x005c0044, 0x00000039}, /* 3: CG_PB_CLKO = 100 MHz */
- {0x005c0044, 0x00000039}, /* 4: CG_PB_CLKO = 133 MHz */
- {0x004a0044, 0x00000040}, /* 5: CG_PB_CLKO = 167 MHz */
- {0x005c0044, 0x00000039}, /* 6: CG_PB_CLKO = 200 MHz */
- {0x004f0044, 0x0000003e} /* 7: CG_PB_CLKO = 233 MHz */
-};
-#endif /* CONFIG_SYS_CLK_SPREAD */
-
-/*
- * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
- * (based on recommended Tsi108 reference clock 33MHz)
- */
-static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
-
-/*
- * get_board_bus_clk ()
- *
- * returns the bus clock in Hz.
- */
-unsigned long get_board_bus_clk (void)
-{
- ulong i;
-
- /* Detect PB clock freq. */
- i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
- i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
-
- return pb_clk_sel[i] * 1000000;
-}
-
-/*
- * board_early_init_f ()
- *
- * board-specific initialization executed from flash
- */
-
-int board_early_init_f (void)
-{
- ulong i;
-
- gd->mem_clk = 0;
- i = in32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
- CG_PWRUP_STATUS);
- i = (i >> 20) & 0x07; /* Get GD PLL multiplier */
- switch (i) {
- case 0: /* external clock */
- printf ("Using external clock\n");
- break;
- case 1: /* system clock */
- gd->mem_clk = gd->bus_clk;
- break;
- case 4: /* 133 MHz */
- case 5: /* 166 MHz */
- case 6: /* 200 MHz */
- gd->mem_clk = pb_clk_sel[i] * 1000000;
- break;
- default:
- printf ("Invalid DDR2 clock setting\n");
- return -1;
- }
- printf ("BUS: %lu MHz\n", get_board_bus_clk() / 1000000);
- printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000);
- return 0;
-}
-
-/*
- * board_early_init_r() - Tsi108 initialization function executed right after
- * relocation. Contains code that cannot be executed from flash.
- */
-
-int board_early_init_r (void)
-{
- ulong temp, i;
- ulong reg_val;
- volatile ulong *reg_ptr;
-
- reg_ptr =
- (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
-
- for (i = 0; i < 32; i++) {
- *reg_ptr++ = 0x00000201; /* SWAP ENABLED */
- *reg_ptr++ = 0x00;
- }
-
- __asm__ __volatile__ ("eieio");
- __asm__ __volatile__ ("sync");
-
- /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
- 0x80000001);
- __asm__ __volatile__ ("sync");
-
- /* Make sure that OCN_BAR2 decoder is set (to allow following immediate
- * read from SDRAM)
- */
-
- temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
- __asm__ __volatile__ ("sync");
-
- /*
- * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
- * processor bus address space. Immediately after reset LUT and address
- * translation are disabled for this BAR. Now we have to initialize LUT
- * and switch from the BOOT mode to the normal operation mode.
- *
- * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
- * and covers 512MB of address space. To allow larger aperture we also
- * have to relocate register window of Tsi108
- *
- * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
- * mode.
- *
- * initialize pointer to LUT associated with PB_OCN_BAR1
- */
- reg_ptr =
- (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
-
- for (i = 0; i < 32; i++) {
- *reg_ptr++ = pb2ocn_lut1[i].lower;
- *reg_ptr++ = pb2ocn_lut1[i].upper;
- }
-
- __asm__ __volatile__ ("sync");
-
- /* Base addresses for CS0, CS1, CS2, CS3 */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
- 0x00000000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
- 0x00100000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
- 0x00200000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
- 0x00300000);
- __asm__ __volatile__ ("sync");
-
- /* Masks for HLP banks */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
- 0xFFF00000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
- 0xFFF00000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
- 0xFFF00000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
- 0xFFF00000);
- __asm__ __volatile__ ("sync");
-
- /* Set CTRL0 values for banks */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
- 0x7FFC44C2);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
- 0x7FFC44C0);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
- 0x7FFC44C0);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
- 0x7FFC44C2);
- __asm__ __volatile__ ("sync");
-
- /* Set banks to latched mode, enabled, and other default settings */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
- 0x7C0F2000);
- __asm__ __volatile__ ("sync");
-
- /*
- * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
- * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
- */
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
- 0xE0000011);
- __asm__ __volatile__ ("sync");
-
- /* Make sure that OCN_BAR2 decoder is set (to allow following
- * immediate read from SDRAM)
- */
-
- temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
- __asm__ __volatile__ ("sync");
-
- /*
- * SRI: At this point we have enabled the HLP banks. That means we can
- * now read from the NVRAM and initialize the environment variables.
- * We will over-ride the env_init called in board_init_f
- * This is really a work-around because, the HLP bank 1
- * where NVRAM resides is not visible during board_init_f
- * (arch/powerpc/lib/board.c)
- * Alternatively, we could use the I2C EEPROM at start-up to configure
- * and enable all HLP banks and not just HLP 0 as is being done for
- * Taiga Rev. 2.
- */
-
- env_init ();
-
-#ifndef DISABLE_PBM
-
- /*
- * For IBM processors we have to set Address-Only commands generated
- * by PBM that are different from ones set after reset.
- */
-
- temp = get_cpu_type ();
-
- if ((CPU_750FX == temp) || (CPU_750GX == temp))
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
- 0x00009955);
-#endif /* DISABLE_PBM */
-
-#ifdef CONFIG_PCI
- /*
- * Initialize PCI/X block
- */
-
- /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
- PCI_PFAB_BAR0_UPPER, 0);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
- 0xFB000001);
- __asm__ __volatile__ ("sync");
-
- /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
-
- temp = in32(CONFIG_SYS_TSI108_CSR_BASE +
- TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
-
- temp &= ~0xFF00; /* Clear the BUS_NUM field */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
- temp);
-
- /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
- 0);
- __asm__ __volatile__ ("sync");
-
- /* This register is on the PCI side to interpret the address it receives
- * and maps it as a IO address.
- */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
- 0x00000001);
- __asm__ __volatile__ ("sync");
-
- /*
- * Map PCI/X Memory Space
- *
- * Transactions directed from OCM to PCI Memory Space are directed
- * from PB to PCI
- * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
- * If address remapping is required the corresponding PCI_PFAB_MEM32
- * and PCI_PFAB_PFMx register groups have to be configured.
- *
- * Map the path from the PCI/X bus into the system memory
- *
- * The memory mapped window assotiated with PCI P2O_BAR2 provides
- * access to the system memory without address remapping.
- * All system memory is opened for accesses initiated by PCI/X bus
- * masters.
- *
- * Initialize LUT associated with PCI P2O_BAR2
- *
- * set pointer to LUT associated with PCI P2O_BAR2
- */
-
- reg_ptr =
- (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
-
-#ifdef DISABLE_PBM
-
- /* In case when PBM is disabled (no HW supported cache snoopng on PB)
- * P2O_BAR2 is directly mapped into the system memory without address
- * translation.
- */
-
- reg_val = 0x00000004; /* SDRAM port + NO Addr_Translation */
-
- for (i = 0; i < 32; i++) {
- *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
- *reg_ptr++ = 0; /* P2O_BAR2_LUT_UPPERx */
- }
-
- /* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */
- reg_val = 0x00007500;
-#else
-
- reg_val = 0x00000002; /* Destination port = PBM */
-
- for (i = 0; i < 32; i++) {
- *reg_ptr++ = reg_val; /* P2O_BAR2_LUTx */
-/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
- *reg_ptr++ = 0x40000000;
-/* offset = 16MB, address translation is enabled to allow byte swapping */
- reg_val += 0x01000000;
- }
-
-/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */
- reg_val = 0x00007100;
-#endif
-
- __asm__ __volatile__ ("eieio");
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
- reg_val);
- __asm__ __volatile__ ("sync");
-
- /* Set 64-bit PCI bus address for system memory
- * ( 0 is the best choice for easy mapping)
- */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
- 0x00000000);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
- 0x00000000);
- __asm__ __volatile__ ("sync");
-
-#ifndef DISABLE_PBM
- /*
- * The memory mapped window assotiated with PCI P2O_BAR3 provides
- * access to the system memory using SDRAM OCN port and address
- * translation. This is alternative way to access SDRAM from PCI
- * required for Tsi108 emulation testing.
- * All system memory is opened for accesses initiated by
- * PCI/X bus masters.
- *
- * Initialize LUT associated with PCI P2O_BAR3
- *
- * set pointer to LUT associated with PCI P2O_BAR3
- */
- reg_ptr =
- (ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
-
- reg_val = 0x00000004; /* Destination port = SDC */
-
- for (i = 0; i < 32; i++) {
- *reg_ptr++ = reg_val; /* P2O_BAR3_LUTx */
-
-/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
- *reg_ptr++ = 0;
-
-/* offset = 16MB, address translation is enabled to allow byte swapping */
- reg_val += 0x01000000;
- }
-
- __asm__ __volatile__ ("eieio");
- __asm__ __volatile__ ("sync");
-
- /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
-
- reg_val =
- in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
- PCI_P2O_PAGE_SIZES);
- reg_val &= ~0x00FF;
- reg_val |= 0x0071;
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
- reg_val);
- __asm__ __volatile__ ("sync");
-
- /* Set 64-bit base PCI bus address for window (0x20000000) */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
- 0x00000000);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
- 0x20000000);
- __asm__ __volatile__ ("sync");
-
-#endif /* !DISABLE_PBM */
-
-#ifdef ENABLE_PCI_CSR_BAR
- /* open if required access to Tsi108 CSRs from the PCI/X bus */
- /* enable BAR0 on the PCI/X bus */
- reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE +
- TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
- reg_val |= 0x02;
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
- reg_val);
- __asm__ __volatile__ ("sync");
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
- 0x00000000);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
- CONFIG_SYS_TSI108_CSR_BASE);
- __asm__ __volatile__ ("sync");
-
-#endif
-
- /*
- * Finally enable PCI/X Bus Master and Memory Space access
- */
-
- reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
- reg_val |= 0x06;
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
- __asm__ __volatile__ ("sync");
-
-#endif /* CONFIG_PCI */
-
- /*
- * Initialize MPIC outputs (interrupt pins):
- * Interrupt routing on the Grendel Emul. Board:
- * PB_INT[0] -> INT (CPU0)
- * PB_INT[1] -> INT (CPU1)
- * PB_INT[2] -> MCP (CPU0)
- * PB_INT[3] -> MCP (CPU1)
- * Set interrupt controller outputs as Level_Sensitive/Active_Low
- */
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
- __asm__ __volatile__ ("sync");
-
- /*
- * Ensure that Machine Check exception is enabled
- * We need it to support PCI Bus probing (configuration reads)
- */
-
- reg_val = mfmsr ();
- mtmsr(reg_val | MSR_ME);
-
- return 0;
-}
-
-/*
- * Needed to print out L2 cache info
- * used in the misc_init_r function
- */
-
-unsigned long get_l2cr (void)
-{
- unsigned long l2controlreg;
- asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
- return l2controlreg;
-}
-
-/*
- * misc_init_r()
- *
- * various things to do after relocation
- *
- */
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_SYS_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */
- ulong i;
-
- /* Ensure that Spread-Spectrum is disabled */
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
-
- /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
- * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
- */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
- 0x002e0044); /* D = 0.25% */
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
- 0x00000039); /* BWADJ */
-
- /* Initialize PLL0: CG_PB_CLKO */
- /* Detect PB clock freq. */
- i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
- i = (i >> 16) & 0x07; /* Get PB PLL multiplier */
-
- out32 (CONFIG_SYS_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
- out32 (CONFIG_SYS_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
-
- /* Wait and set SSEN for both PLL0 and 1 */
- udelay (1000);
- out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
- 0x802e0044); /* D=0.25% */
- out32 (CONFIG_SYS_TSI108_CSR_BASE +
- TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
- 0x80000000 | pll0_config[i].ctrl0);
-#endif /* CONFIG_SYS_CLK_SPREAD */
-
-#ifdef CONFIG_SYS_L2
- l2cache_enable ();
-#endif
- printf ("BUS: %lu MHz\n", gd->bus_clk / 1000000);
- printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000);
-
- /*
- * All the information needed to print the cache details is avaiblable
- * at this point i.e. above call to l2cache_enable is the very last
- * thing done with regards to enabling diabling the cache.
- * So this seems like a good place to print all this information
- */
-
- printf ("CACHE: ");
- switch (get_cpu_type()) {
- case CPU_7447A:
- printf ("L1 Instruction cache - 32KB 8-way");
- (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- printf ("L1 Data cache - 32KB 8-way");
- (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- printf ("Unified L2 cache - 512KB 8-way");
- (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- printf ("\n");
- break;
-
- case CPU_7448:
- printf ("L1 Instruction cache - 32KB 8-way");
- (get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- printf ("L1 Data cache - 32KB 8-way");
- (get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- printf ("Unified L2 cache - 1MB 8-way");
- (get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
- printf (" DISABLED\n");
- break;
- default:
- break;
- }
- return 0;
-}
+++ /dev/null
-if TARGET_PPMC7XX
-
-config SYS_BOARD
- default "ppmc7xx"
-
-config SYS_CONFIG_NAME
- default "ppmc7xx"
-
-endif
+++ /dev/null
-PPMC7XX BOARD
-#M: -
-S: Maintained
-F: board/ppmc7xx/
-F: include/configs/ppmc7xx.h
-F: configs/ppmc7xx_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := init.o
-obj-y += ppmc7xx.o pci.o flash.o
+++ /dev/null
-/*
- * flash.c
- * -------
- *
- * Flash programming routines for the Wind River PPMC 74xx/7xx
- * based on flash.c from the TQM8260 board.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <74xx_7xx.h>
-
-#define DWORD unsigned long long
-
-/* Local function prototypes */
-static int write_dword (flash_info_t* info, ulong dest, unsigned char *pdata);
-static void write_via_fpu (volatile DWORD* addr, DWORD* data);
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
- unsigned long msr;
- DWORD cmd_reset = 0x00F000F000F000F0LL;
-
- if (flash_info[0].flash_id != FLASH_UNKNOWN) {
- msr = get_msr ();
- set_msr (msr | MSR_FP);
-
- write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset );
-
- set_msr (msr);
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
- int i;
- unsigned long msr;
- DWORD flashtest;
- DWORD cmd_select[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
- 0x0090009000900090LL };
-
- /* Enable FPU */
- msr = get_msr ();
- set_msr (msr | MSR_FP);
-
- /* Write auto-select command sequence */
- write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] );
- write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] );
- write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] );
-
- /* Restore FPU */
- set_msr (msr);
-
- /* Read manufacturer ID */
- flashtest = *(volatile DWORD*)baseaddr;
- switch ((int)flashtest) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- /* No, faulty or unknown flash */
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0);
- }
-
- /* Read device ID */
- flashtest = *(volatile DWORD*)(baseaddr + 8);
- switch ((long)flashtest) {
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00400000;
- break;
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00400000;
- break;
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00800000;
- break;
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00800000;
- break;
- case AMD_ID_DL322T:
- info->flash_id += FLASH_AMDL322T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break;
- case AMD_ID_DL322B:
- info->flash_id += FLASH_AMDL322B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break;
- case AMD_ID_DL323T:
- info->flash_id += FLASH_AMDL323T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break;
- case AMD_ID_DL323B:
- info->flash_id += FLASH_AMDL323B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break;
- case AMD_ID_LV640U:
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x02000000;
- break;
- default:
- /* Unknown flash type */
- info->flash_id = FLASH_UNKNOWN;
- return (0);
- }
-
- if ((long)flashtest == AMD_ID_LV640U) {
- /* set up sector start adress table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = baseaddr + (i * 0x00040000);
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set up sector start adress table (bottom sector type) */
- info->start[0] = baseaddr + 0x00000000;
- info->start[1] = baseaddr + 0x00010000;
- info->start[2] = baseaddr + 0x00018000;
- info->start[3] = baseaddr + 0x00020000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
- }
- } else {
- /* set up sector start adress table (top sector type) */
- i = info->sector_count - 1;
- info->start[i--] = baseaddr + info->size - 0x00010000;
- info->start[i--] = baseaddr + info->size - 0x00018000;
- info->start[i--] = baseaddr + info->size - 0x00020000;
- for (; i >= 0; i--) {
- info->start[i] = baseaddr + i * 0x00040000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- if (*(volatile DWORD*)(info->start[i] + 16) & 0x0001000100010001LL) {
- info->protect[i] = 1; /* D0 = 1 if protected */
- } else {
- info->protect[i] = 0;
- }
- }
-
- flash_reset ();
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
- unsigned long size_b0 = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here (only one bank) */
- size_b0 = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
- if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 >> 20);
- }
-
- /*
- * protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf ("FUJITSU ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM800T:
- printf ("29LV800T (8 M, top sector)\n");
- break;
- case FLASH_AM800B:
- printf ("29LV800T (8 M, bottom sector)\n");
- break;
- case FLASH_AM160T:
- printf ("29LV160T (16 M, top sector)\n");
- break;
- case FLASH_AM160B:
- printf ("29LV160B (16 M, bottom sector)\n");
- break;
- case FLASH_AMDL322T:
- printf ("29DL322T (32 M, top sector)\n");
- break;
- case FLASH_AMDL322B:
- printf ("29DL322B (32 M, bottom sector)\n");
- break;
- case FLASH_AMDL323T:
- printf ("29DL323T (32 M, top sector)\n");
- break;
- case FLASH_AMDL323B:
- printf ("29DL323B (32 M, bottom sector)\n");
- break;
- case FLASH_AM640U:
- printf ("29LV640D (64 M, uniform sector)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned long msr;
- DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
- 0x0080008000800080LL, 0x00AA00AA00AA00AALL,
- 0x0055005500550055LL, 0x0030003000300030LL };
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Enable FPU */
- msr = get_msr();
- set_msr ( msr | MSR_FP );
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[0] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[1] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[2] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[3] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[4] );
- udelay (1000);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- write_via_fpu ((DWORD*)info->start[sect], &cmd_erase[5] );
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* Restore FPU */
- set_msr (msr);
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- while ((*(volatile DWORD*)info->start[l_sect] & 0x0080008000800080LL )
- != 0x0080008000800080LL )
- {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- flash_reset ();
-
- printf (" done\n");
- return 0;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong dp;
- static unsigned char bb[8];
- int i, l, rc, cc = cnt;
-
- dp = (addr & ~7); /* get lower dword aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - dp) != 0) {
- for (i = 0; i < 8; i++)
- bb[i] = (i < l || (i - l) >= cc) ? *(char*)(dp + i) : *src++;
- if ((rc = write_dword (info, dp, bb)) != 0) {
- return (rc);
- }
- dp += 8;
- cc -= 8 - l;
- }
-
- /*
- * handle word aligned part
- */
- while (cc >= 8) {
- if ((rc = write_dword (info, dp, src)) != 0) {
- return (rc);
- }
- dp += 8;
- src += 8;
- cc -= 8;
- }
-
- if (cc <= 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- for (i = 0; i < 8; i++) {
- bb[i] = (i < cc) ? *src++ : *(char*)(dp + i);
- }
- return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
- ulong start;
- unsigned long msr;
- int flag, i;
- DWORD data;
- DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
- 0x00A000A000A000A0LL };
-
- for (data = 0, i = 0; i < 8; i++)
- data = (data << 8) + *pdata++;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*(DWORD*)dest & data) != data) {
- return (2);
- }
-
- /* Enable FPU */
- msr = get_msr();
- set_msr( msr | MSR_FP );
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[0] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_write[1] );
- write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[2] );
- write_via_fpu ((DWORD*)dest, &data );
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* Restore FPU */
- set_msr(msr);
-
- /* data polling for D7 */
- start = get_timer (0);
- while (*(volatile DWORD*)dest != data ) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void write_via_fpu (volatile DWORD* addr, DWORD* data)
-{
- __asm__ __volatile__ ("lfd 1, 0(%0)"::"r" (data));
- __asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
- __asm__ __volatile__ ("eieio");
-}
+++ /dev/null
-/*
- * init.S
- * ------
- *
- * Wind River PPMC 7xx/74xx init code.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- *
- * NOTE: The following code was generated automatically by Workbench
- * from the ppmc7400_107.reg register file.
- */
-
-#include <ppc_asm.tmpl>
-
-
-.globl board_asm_init
-board_asm_init:
-
- lis r4,0xFEC0
- ori r4,r4,0x0000
- lis r5,0xFEE0
- ori r5,r5,0x0000
- lis r3,0x8000 # ADDR_00
- ori r3,r3,0x0000
- stwbrx r3,0,r4
- li r3,0x1057 # VENDOR
- li r8, 0x0
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_02
- ori r3,r3,0x0002
- stwbrx r3,0,r4
- li r3,0x0004 # ID
- li r8, 0x2
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_04
- ori r3,r3,0x0004
- stwbrx r3,0,r4
- li r3,0x0006 # PCICMD
- li r8, 0x0
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_06
- ori r3,r3,0x0006
- stwbrx r3,0,r4
- li r3,0x00A0 # PCISTAT
- li r8, 0x2
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_08
- ori r3,r3,0x0008
- stwbrx r3,0,r4
- li r3,0x10 # REVID
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_09
- ori r3,r3,0x0009
- stwbrx r3,0,r4
- li r3,0x00 # PROGIR
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0A
- ori r3,r3,0x000A
- stwbrx r3,0,r4
- li r3,0x00 # SUBCCODE
- stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0B
- ori r3,r3,0x000B
- stwbrx r3,0,r4
- li r3,0x06 # PBCCR
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_0C
- ori r3,r3,0x000C
- stwbrx r3,0,r4
- li r3,0x08 # PCLSR
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_0D
- ori r3,r3,0x000D
- stwbrx r3,0,r4
- li r3,0x00 # PLTR
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0E
- ori r3,r3,0x000E
- stwbrx r3,0,r4
- li r3,0x00 # HEADTYPE
- stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0F
- ori r3,r3,0x000F
- stwbrx r3,0,r4
- li r3,0x00 # BISTCTRL
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_10
- ori r3,r3,0x0010
- stwbrx r3,0,r4
- lis r3,0x0000 # LMBAR
- ori r3,r3,0x0008
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_14
- ori r3,r3,0x0014
- stwbrx r3,0,r4
- lis r3,0xF000 # PCSRBAR
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_3C
- ori r3,r3,0x003C
- stwbrx r3,0,r4
- li r3,0x00 # ILR
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_3D
- ori r3,r3,0x003D
- stwbrx r3,0,r4
- li r3,0x01 # INTPIN
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_3E
- ori r3,r3,0x003E
- stwbrx r3,0,r4
- li r3,0x00 # MIN_GNT
- stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_3F
- ori r3,r3,0x003F
- stwbrx r3,0,r4
- li r3,0x00 # MAX_LAT
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_40
- ori r3,r3,0x0040
- stwbrx r3,0,r4
- li r3,0x00 # BUSNB
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_41
- ori r3,r3,0x0041
- stwbrx r3,0,r4
- li r3,0x00 # SBUSNB
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_46
- ori r3,r3,0x0046
- stwbrx r3,0,r4
-# li r3,0xE080 # PCIARB
- li r3,-0x1F80 # PCIARB
- li r8, 0x2
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_70
- ori r3,r3,0x0070
- stwbrx r3,0,r4
- li r3,0x0000 # PMCR1
- li r8, 0x0
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_72
- ori r3,r3,0x0072
- stwbrx r3,0,r4
- li r3,0xC0 # PMCR2
- stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_73
- ori r3,r3,0x0073
- stwbrx r3,0,r4
- li r3,0xEF # ODCR
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_74
- ori r3,r3,0x0074
- stwbrx r3,0,r4
- li r3,0x7D00 # CLKDCR
- li r8, 0x0
- sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_76
- ori r3,r3,0x0076
- stwbrx r3,0,r4
- li r3,0x00 # MDCR
- stb r3,0x2(r5)
- lis r6,0xFCE0
- ori r6,r6,0x0000 # r6 is the EUMBAR Base Address
- lis r3,0x8000 # ADDR_78
- ori r3,r3,0x0078
- stwbrx r3,0,r4
- lis r3,0xFCE0 # EUMBBAR
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_80
- ori r3,r3,0x0080
- stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR1
- ori r3,r3,0x4000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_84
- ori r3,r3,0x0084
- stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR2
- ori r3,r3,0xFFFF
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_88
- ori r3,r3,0x0088
- stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR1
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_8C
- ori r3,r3,0x008C
- stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR2
- ori r3,r3,0x0303
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_90
- ori r3,r3,0x0090
- stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR1
- ori r3,r3,0x7F3F
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_94
- ori r3,r3,0x0094
- stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR2
- ori r3,r3,0xFFFF
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_98
- ori r3,r3,0x0098
- stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM1
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_9C
- ori r3,r3,0x009C
- stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM2
- ori r3,r3,0x0303
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A0
- ori r3,r3,0x00A0
- stwbrx r3,0,r4
- li r3,0x03 # MEMBNKEN
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_A3
- ori r3,r3,0x00A3
- stwbrx r3,0,r4
- li r3,0x00 # MEMPMODE
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_B8
- ori r3,r3,0x00B8
- stwbrx r3,0,r4
- li r3,0x00 # ECCCNT
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_B9
- ori r3,r3,0x00B9
- stwbrx r3,0,r4
- li r3,0x00 # ECCTRG
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C0
- ori r3,r3,0x00C0
- stwbrx r3,0,r4
- li r3,0xFF # ERRENR1
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C1
- ori r3,r3,0x00C1
- stwbrx r3,0,r4
- li r3,0x00 # ERRDR1
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C3
- ori r3,r3,0x00C3
- stwbrx r3,0,r4
- li r3,0x50 # IPBESR
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C4
- ori r3,r3,0x00C4
- stwbrx r3,0,r4
- li r3,0xBF # ERRENR2
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C5
- ori r3,r3,0x00C5
- stwbrx r3,0,r4
- li r3,0x00 # ERRDR2
- stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C7
- ori r3,r3,0x00C7
- stwbrx r3,0,r4
- li r3,0x00 # PCIBESR
- stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C8
- ori r3,r3,0x00C8
- stwbrx r3,0,r4
- lis r3,0x0000 # BERRADDR
- ori r3,r3,0xE0FE
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_E0
- ori r3,r3,0x00E0
- stwbrx r3,0,r4
- li r3,0xC0 # AMBOR
- stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_F4
- ori r3,r3,0x00F4
- stwbrx r3,0,r4
- lis r3,0x0000 # MCCR2
- ori r3,r3,0x020C
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F8
- ori r3,r3,0x00F8
- stwbrx r3,0,r4
- lis r3,0x0230 # MCCR3
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_FC
- ori r3,r3,0x00FC
- stwbrx r3,0,r4
- lis r3,0x2532 # MCCR4
- ori r3,r3,0x2220
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F0
- ori r3,r3,0x00F0
- stwbrx r3,0,r4
- lis r3,0xFFC8 # MCCR1
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A8
- ori r3,r3,0x00A8
- stwbrx r3,0,r4
- lis r3,0xFF14 # PICR1
- ori r3,r3,0x1CC8
- li r8, 0x0
- stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_AC
- ori r3,r3,0x00AC
- stwbrx r3,0,r4
- lis r3,0x0000 # PICR2
- ori r3,r3,0x0000
- li r8, 0x0
- stwbrx r3,r8,r5
-
- blr
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * PCI initialisation for the MPC10x.
- */
-
-#include <common.h>
-#include <pci.h>
-#include <mpc106.h>
-
-#ifdef CONFIG_PCI
-
-struct pci_controller local_hose;
-
-void pci_init_board(void)
-{
- struct pci_controller* hose = (struct pci_controller *)&local_hose;
- u16 reg16;
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI_MEMORY_BUS,
- CONFIG_SYS_PCI_MEMORY_PHYS,
- CONFIG_SYS_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI_MEM_BUS,
- CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
- CONFIG_SYS_ISA_MEM_BUS,
- CONFIG_SYS_ISA_MEM_PHYS,
- CONFIG_SYS_ISA_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + 3,
- CONFIG_SYS_PCI_IO_BUS,
- CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
- CONFIG_SYS_ISA_IO_BUS,
- CONFIG_SYS_ISA_IO_PHYS,
- CONFIG_SYS_ISA_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 5;
-
- pci_setup_indirect(hose,
- MPC106_REG_ADDR,
- MPC106_REG_DATA);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-
- /* Initialises the MPC10x PCI Configuration regs. */
- pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
-
- /* Clear non-reserved bits in status register */
- pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
-}
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * ppmc7xx.c
- * ---------
- *
- * Main board-specific routines for Wind River PPMC 7xx/74xx board.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-
-
-/* Define some MPC107 (memory controller) registers */
-#define MPC107_EUMB_GCR 0xfce41020
-#define MPC107_EUMB_IACKR 0xfce600a0
-
-
-/* Function prototypes */
-extern void _start(void);
-
-
-/*
- * initdram()
- *
- * This function normally initialises the (S)DRAM of the system. For this board
- * the SDRAM was already initialised by board_asm_init (see init.S) so we just
- * return the size of RAM.
- */
-phys_size_t initdram( int board_type )
-{
- return CONFIG_SYS_SDRAM_SIZE;
-}
-
-
-/*
- * after_reloc()
- *
- * This is called after U-Boot has been copied from Flash/ROM to RAM. It gives
- * us an opportunity to do some additional setup before the rest of the system
- * is initialised. We don't need to do anything, so we just call board_init_r()
- * which should never return.
- */
-void after_reloc( ulong dest_addr, gd_t* gd )
-{
- /* Jump to the main U-Boot board init code */
- board_init_r( gd, dest_addr );
-}
-
-
-/*
- * checkboard()
- *
- * We could do some board level checks here, such as working out what version
- * it is, but for this board we simply display it's name (on the console).
- */
-int checkboard( void )
-{
- puts( "Board: Wind River PPMC 7xx/74xx\n" );
- return 0;
-}
-
-
-/*
- * misc_init_r
- *
- * Used for other setup which needs to be done late in the bring-up phase.
- */
-int misc_init_r( void )
-{
- /* Reset the EPIC and clear pending interrupts */
- out32r(MPC107_EUMB_GCR, 0xa0000000);
- while( in32r( MPC107_EUMB_GCR ) & 0x80000000 );
- out32r( MPC107_EUMB_GCR, 0x20000000 );
- while( in32r( MPC107_EUMB_IACKR ) != 0xff );
-
- /* Enable the I-Cache */
- icache_enable();
-
- return 0;
-}
-
-
-/*
- * do_reset()
- *
- * Shell command to reset the board.
- */
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- printf( "Resetting...\n" );
-
- /* Disabe and invalidate cache */
- icache_disable();
- dcache_disable();
-
- /* Jump to cold reset point (in RAM) */
- _start();
-
- /* Should never get here */
- while(1)
- ;
-
- return 1;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_74xx_7xx=y
-CONFIG_TARGET_ELPPC=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_74xx_7xx=y
-CONFIG_TARGET_P3G4=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_74xx_7xx=y
-CONFIG_TARGET_ZUMA=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_74xx_7xx=y
-CONFIG_TARGET_MPC7448HPC2=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_74xx_7xx=y
-CONFIG_TARGET_PPMC7XX=y
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+P3G4 powerpc 74xx_7xx - - Wolfgang Denk <wd@denx.de>
+ZUMA powerpc 74xx_7xx - - Nye Liu <nyet@zumanetworks.com>
+ppmc7xx powerpc 74xx_7xx - -
+ELPPC powerpc 74xx_7xx - -
+mpc7448hpc2 powerpc 74xx_7xx - - Roy Zang <tie-fei.zang@freescale.com>
CPCI405 ppc4xx 405gp 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
CPCI405DT ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
CPCI405AB ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
alias mpc85xx uboot, afleming, galak
alias mpc86xx uboot, afleming, galak
alias ppc4xx uboot, stroese
-alias ppc7xx uboot, wd
-alias ppc74xx uboot, wd
alias sandbox sjg
alias sb sandbox
for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
#endif
for (bdf = PCI_BDF(bus, 0, 0);
-#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX)
- bdf < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
- PCI_MAX_PCI_FUNCTIONS - 1);
-#else
bdf < PCI_BDF(bus + 1, 0, 0);
-#endif
bdf += PCI_BDF(0, 0, 1)) {
if (pci_skip_dev(hose, bdf))
continue;
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber, Mission Critical Linux, Inc. <huber@mclx.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * 74xx_7xx.h
- *
- * 74xx/7xx specific definitions
- */
-
-#ifndef __MPC74XX_H__
-#define __MPC74XX_H__
-
-/*----------------------------------------------------------------
- * Exception offsets (PowerPC standard)
- */
-#define EXC_OFF_SYS_RESET 0x0100 /* default system reset offset */
-#define _START_OFFSET EXC_OFF_SYS_RESET
-
-/*----------------------------------------------------------------
- * l2cr values
- */
-#define l2cr 1017
-
-#define L2CR_L2E 0x80000000 /* bit 0 - enable */
-#define L2CR_L2PE 0x40000000 /* bit 1 - data parity */
-#define L2CR_L2SIZ_2M 0x00000000 /* bits 2-3 - 2MB, MPC7400 only! */
-#define L2CR_L2SIZ_1M 0x30000000 /* ... 1MB */
-#define L2CR_L2SIZ_HM 0x20000000 /* ... 512K */
-#define L2CR_L2SIZ_QM 0x10000000 /* ... 256k */
-#define L2CR_L2CLK_1 0x02000000 /* bits 4-6 clock ratio div 1 */
-#define L2CR_L2CLK_1_5 0x04000000 /* bits 4-6 clock ratio div 1.5 */
-#define L2CR_L2CLK_2 0x08000000 /* bits 4-6 clock ratio div 2 */
-#define L2CR_L2CLK_2_5 0x0a000000 /* bits 4-6 clock ratio div 2.5 */
-#define L2CR_L2CLK_3 0x0c000000 /* bits 4-6 clock ratio div 3 */
-#define L2CR_L2CLK_3_5 0x06000000 /* bits 4-6 clock ratio div 3.5 */
-#define L2CR_L2CLK_4 0x0e000000 /* bits 4-6 clock ratio div 4 */
-#define L2CR_L2RAM_BURST 0x01000000 /* bits 7-8 - burst SRAM */
-#define L2CR_DO 0x00400000 /* bit 9 - enable caching of instr. in L2 */
-#define L2CR_L2I 0x00200000 /* bit 10 - global invalidate bit */
-#define L2CR_L2CTL 0x00100000 /* bit 11 - l2 ram control */
-#define L2CR_L2WT 0x00080000 /* bit 12 - l2 write-through */
-#define L2CR_TS 0x00040000 /* bit 13 - test support on */
-#define L2CR_TS_OFF -L2CR_TS /* bit 13 - test support off */
-#define L2CR_L2OH_5 0x00000000 /* bits 14-15 - output hold time = short */
-#define L2CR_L2OH_1 0x00010000 /* bits 14-15 - output hold time = medium */
-#define L2CR_L2OH_INV 0x00020000 /* bits 14-15 - output hold time = long */
-#define L2CR_L2IP 0x00000001 /* global invalidate in progress */
-
-#ifndef __ASSEMBLY__
-/* cpu ids we detect */
-typedef enum __cpu_t {
- CPU_740, CPU_750,
- CPU_740P, CPU_750P,
- CPU_745, CPU_755,
- CPU_750CX, CPU_750FX, CPU_750GX,
- CPU_7400,
- CPU_7410,
- CPU_7447A, CPU_7448,
- CPU_7450, CPU_7455, CPU_7457,
- CPU_UNKNOWN} cpu_t;
-
-extern cpu_t get_cpu_type(void);
-
-#define l1icache_enable icache_enable
-
-void l2cache_enable(void);
-void l1dcache_enable(void);
-
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr (unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-static __inline__ unsigned long get_hid0 (void)
-{
- unsigned long hid0;
- asm volatile("mfspr %0, 1008" : "=r" (hid0) :);
- return hid0;
-}
-
-static __inline__ unsigned long get_hid1 (void)
-{
- unsigned long hid1;
- asm volatile("mfspr %0, 1009" : "=r" (hid1) :);
- return hid1;
-}
-
-static __inline__ void set_hid0 (unsigned long hid0)
-{
- asm volatile("mtspr 1008, %0" : : "r" (hid0));
-}
-
-static __inline__ void set_hid1 (unsigned long hid1)
-{
- asm volatile("mtspr 1009, %0" : : "r" (hid1));
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MPC74XX_H__ */
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_EVB64260
-void evb64260_init(void);
-void debug_led(int, int);
-void display_mem_map(void);
-void perform_soft_reset(void);
-#endif
-
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
- defined (CONFIG_74xx_7xx) || \
- defined (CONFIG_74x) || \
- defined (CONFIG_75x) || \
- defined (CONFIG_74xx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
+++ /dev/null
-/*
- * (C) Copyright 2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define GTREGREAD(x) 0xffffffff /* needed for debug */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* these hardware addresses are pretty bogus, please change them to
- suit your needs */
-
-/* first ethernet */
-#define CONFIG_ETHADDR 00:00:5b:ee:de:ad
-
-#define CONFIG_IPADDR 192.168.0.105
-#define CONFIG_SERVERIP 192.168.0.100
-
-#define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */
-
-#define CONFIG_BAUDRATE 9600 /* console baudrate */
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp 1000000; " \
- "setenv bootargs root=ramfs console=ttyS00,9600 " \
- "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \
- "${netmask}:${hostname}:eth0:none; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-/*
- * choose between COM1 and COM2 as serial console
- */
-#define CONFIG_CONS_INDEX 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-#define CONFIG_SYS_BOARD_ASM_INIT
-#define CONFIG_MISC_INIT_R
-
-/*
- * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
- */
-#undef CONFIG_SYS_ADDRESS_MAP_A
-
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
-
-#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
-#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
-#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-
-#define CONFIG_SYS_PCI_IO_BUS 0x00800000
-#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
-#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-
-#define CONFIG_SYS_ISA_IO_BUS 0x00000000
-#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
-#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
-
-/* driver defines FDC,IDE,... */
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_USR_LED_BASE 0x78000000
-#define CONFIG_SYS_NVRAM_BASE 0xff000000
-#define CONFIG_SYS_UART_BASE 0xff400000
-#define CONFIG_SYS_FLASH_BASE 0xfff00000
-
-#define MPC107_EUMB_ADDR 0xfce00000
-#define MPC107_EUMB_PI 0xfce41090
-#define MPC107_EUMB_GCR 0xfce41020
-#define MPC107_EUMB_IACKR 0xfce600a0
-#define MPC107_I2C_ADDR 0xfce03000
-
-/*
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Flash mapping/organization on the MPC10x.
- */
-#define FLASH_BASE0_PRELIM 0xff800000
-#define FLASH_BASE1_PRELIM 0xffc00000
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1"
-#define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
-*/
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
-#undef CONFIG_SYS_MEMTEST
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */
-#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
-#define CONFIG_ENV_ADDR 0x0
-#define CONFIG_ENV_MAP_ADRS 0xff000000
-#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */
-#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
-
-/*
- * Serial devices
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8)
-
-/*
- * PCI stuff
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP /* pci plug-and-play */
-#define CONFIG_PCI_HOST PCI_HOST_AUTO
-#undef CONFIG_PCI_SCAN_SHOW
-
-/*
- * Optional Video console (graphic: SMI LynxEM)
- */
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10))
-#define VIDEO_TSTC_FCT serial_stub_tstc
-#define VIDEO_GETC_FCT serial_stub_getc
-
-#define CONFIG_VIDEO_SMI_LYNXEM
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-
-/*
- * Initial BATs
- */
-#if 1
-
-#define CONFIG_SYS_IBAT0L 0
-#define CONFIG_SYS_IBAT0U 0
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-
-#define CONFIG_SYS_IBAT1L 0
-#define CONFIG_SYS_IBAT1U 0
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-#define CONFIG_SYS_IBAT2L 0
-#define CONFIG_SYS_IBAT2U 0
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-#define CONFIG_SYS_IBAT3L 0
-#define CONFIG_SYS_IBAT3U 0
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#else
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-
-/* address range for flashes */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* ISA IO space */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-/* ISA memory space */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#endif
-
-/*
- * Speed settings are board specific
- */
-#define CONFIG_SYS_BUS_CLK 100000000
-#define CONFIG_SYS_CPU_CLK 400000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#if 1
-#define L2_INIT 0 /* cpu 750 CXe*/
-#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-#include "../board/evb64260/local.h"
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_P3G4 1 /* this is a P3G4 board */
-#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115200 */
-
-#undef CONFIG_ECC /* enable ECC support */
-/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_BOARD_EARLY_INIT_F 1
-
-#define CONFIG_SYS_BOARD_NAME "P3G4"
-
-#undef CONFIG_SYS_HUSH_PARSER
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-#define CONFIG_MPSC
-#define CONFIG_MPSC_PORT 0
-
-
-/* define this if you want to enable GT MAC filtering */
-#define CONFIG_GT_USE_MAC_HASH_TABLE
-
-#undef CONFIG_ETHER_PORT_MII /* use RMII */
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "hostname=p3g4\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "rootpath=/opt/eldk/ppc_74xx\0" \
- "bootfile=/tftpboot/p3g4/uImage\0" \
- "kernel_addr=ff000000\0" \
- "ramdisk_addr=ff010000\0" \
- "load=tftp 100000 /tftpboot/p3g4/u-boot.bin\0" \
- "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
- "cp.b 100000 fff00000 ${filesize};" \
- "setenv filesize;saveenv\0" \
- "upd=run load update\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_ALTIVEC /* undef to disable */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_UNIVERSE
-#define CONFIG_CMD_BSP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
-#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xff000000
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS 1
-#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
-
-/* Peripheral Device section */
-#define CONFIG_SYS_GT_REGS 0xf8000000
-#define CONFIG_SYS_DEV_BASE 0xff000000
-
-#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE
-#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
-#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
-#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
-
-#define CONFIG_SYS_DEV0_SIZE _8M /* Flash bank */
-#define CONFIG_SYS_DEV1_SIZE 0 /* unused */
-#define CONFIG_SYS_DEV2_SIZE 0 /* unused */
-#define CONFIG_SYS_DEV3_SIZE 0 /* unused */
-
-#define CONFIG_SYS_16BIT_BOOT_PAR 0xc01b5e7c
-#define CONFIG_SYS_DEV0_PAR CONFIG_SYS_16BIT_BOOT_PAR
-
-#if 0 /* Wrong?? NTL */
-#define CONFIG_SYS_MPP_CONTROL_0 0x53541717 /* InitAct EOT[4] DBurst TCEn[1] */
- /* DMAAck[1:0] GNT0[1:0] */
-#else
-#define CONFIG_SYS_MPP_CONTROL_0 0x53547777 /* InitAct EOT[4] DBurst TCEn[1] */
- /* REQ0[1:0] GNT0[1:0] */
-#endif
-#define CONFIG_SYS_MPP_CONTROL_1 0x44009911 /* TCEn[4] TCTcnt[4] GPP[13:12] */
- /* DMAReq[4] DMAAck[4] WDNMI WDE */
-#if 0 /* Wrong?? NTL */
-#define CONFIG_SYS_MPP_CONTROL_2 0x40091818 /* TCTcnt[0] GPP[22:21] BClkIn */
- /* DMAAck[1:0] GNT1[1:0] */
-#else
-#define CONFIG_SYS_MPP_CONTROL_2 0x40098888 /* TCTcnt[0] */
- /* GPP[22] (RS232IntB or PCI1Int) */
- /* GPP[21] (RS323IntA) */
- /* BClkIn */
- /* REQ1[1:0] GNT1[1:0] */
-#endif
-
-#if 0 /* Wrong?? NTL */
-# define CONFIG_SYS_MPP_CONTROL_3 0x00090066 /* GPP[31:29] BClkOut0 */
- /* GPP[27:26] Int[1:0] */
-#else
-# define CONFIG_SYS_MPP_CONTROL_3 0x22090066 /* MREQ MGNT */
- /* GPP[29] (PCI1Int) */
- /* BClkOut0 */
- /* GPP[27] (PCI0Int) */
- /* GPP[26] (RtcInt or PCI1Int) */
- /* CPUInt[25:24] */
-#endif
-
-#define CONFIG_SYS_SERIAL_PORT_MUX 0x00001102 /* 11=MPSC1/MPSC0 02=ETH 0 and 2 RMII */
-
-#if 0 /* Wrong?? - NTL */
-# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x000002c6
-#else
-# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 0010 1100 0110 0000 */
- /* gpp[29] */
- /* gpp[27:26] */
- /* gpp[22:21] */
-
-# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200 /* 0x448 */
- /* idmas use buffer 1,1
- comm use buffer 0
- pci use buffer 1,1
- cpu use buffer 0
- normal load (see also ifdef HVL)
- standard SDRAM (see also ifdef REG)
- non staggered refresh */
- /* 31:26 25 23 20 19 18 16 */
- /* 110110 00 111 0 0 00 1 */
- /* refresh_count=0x200
- phisical interleaving disable
- virtual interleaving enable */
- /* 15 14 13:0 */
- /* 1 0 0x200 */
-#endif
-
-#if 0
-#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE
-#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */
-#endif
-#undef CONFIG_SYS_INIT_CHAN1
-#undef CONFIG_SYS_INIT_CHAN2
-#if 0
-#define SRAM_BASE CONFIG_SYS_DEV0_SPACE
-#define SRAM_SIZE 0x00100000 /* 1 MB of sram */
-#endif
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE _128M
-#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
-
-#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE _16M
-#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
-
-#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE _16M
-#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/* I2C speed and slave address (for compatability) defaults */
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/* I2C addresses for the two DIMM SPD chips */
-#ifndef CONFIG_EVB64260_750CX
-#define DIMM0_I2C_ADDR 0x56
-#define DIMM1_I2C_ADDR 0x54
-#else /* CONFIG_EVB64260_750CX - only has 1 DIMM */
-#define DIMM0_I2C_ADDR 0x54
-#define DIMM1_I2C_ADDR 0x54
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE BOOT_DEVICE
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH 2 /* 16 bit */
-#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_CFI 1
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR 0xFFFE0000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-#define CONFIG_SYS_BOARD_ASM_INIT 1
-
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
-#define CONFIG_ETHER_PORT_MII /* use two MII ports */
-#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-#include "../board/evb64260/local.h"
-
-#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
-#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-/* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */
-
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
-
-#define CONFIG_ECC /* enable ECC support */
-
-#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_BOARD_ASM_INIT
-
-#define CONFIG_SYS_BOARD_NAME "Zuma APv2"
-
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
- * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
- * to 0 below.
- *
- * to use the MPSC, #define CONFIG_MPSC. If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-#define CONFIG_MPSC
-
-#define CONFIG_MPSC_PORT 0
-
-
-/* define this if you want to enable GT MAC filtering */
-#define CONFIG_GT_USE_MAC_HASH_TABLE
-
-#if 1
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_BOOTCOMMAND \
- "tftpboot && " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:" \
- "$netmask:$hostname:eth0:none panic=5 && bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_ALTIVEC /* undef to disable */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MII /* enable MII commands */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
-#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
-*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
-
-#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xfff00000
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS 4
-#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
-
-/* Peripheral Device section */
-#define CONFIG_SYS_GT_REGS 0xf8000000 /* later mapped GT_REGS */
-#define CONFIG_SYS_DEV_BASE 0xf0000000
-#define CONFIG_SYS_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/
-#define CONFIG_SYS_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */
-#define CONFIG_SYS_DEV2_SIZE _8M /* unused */
-#define CONFIG_SYS_DEV3_SIZE _8M /* unused */
-
-#define CONFIG_SYS_DEV0_PAR 0xc498243c
- /* c 4 9 8 2 4 3 c */
- /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
- /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
- /* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
- /* 3| 0|.... ..| 1| 4 | 0 | 4 | 8 | 7 | 4 */
-
-#define CONFIG_SYS_DEV1_PAR 0xc01b6ac5
- /* c 0 1 b 6 a c 5 */
- /* 33 22|2222|22 22|111 1|11 11|1 1 | | */
- /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
- /* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
- /* 3| 0|.... ..| 1| 5 | 5 | 5 | 5 | 8 | 5 */
-
-
-#define CONFIG_SYS_8BIT_BOOT_PAR 0xc00b5e7c
-
-#define CONFIG_SYS_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
-#define CONFIG_SYS_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */
-#define CONFIG_SYS_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
-#define CONFIG_SYS_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */
- /* GPP[27:24] (27 is int4, rest are GPP) */
-
-#define CONFIG_SYS_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */
-#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */
-
-#define CONFIG_SYS_SDRAM_CONFIG 0xe4e18200 /* 0x448 */
- /* idmas use buffer 1,1
- comm use buffer 1
- pci use buffer 0,0 (pci1->0 pci0->0)
- cpu use buffer 1 (R*18)
- normal load (see also ifdef HVL)
- standard SDRAM (see also ifdef REG)
- non staggered refresh */
- /* 31:26 25 23 20 19 18 16 */
- /* 111001 00 111 0 0 00 1 */
-
- /* refresh count=0x200
- phy interleave disable (by default,
- set later by dram config..)
- virt interleave enable */
- /* 15 14 13:0 */
- /* 1 0 0x200 */
-
-#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE
-#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
-#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
-#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE _128M
-#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE _128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE _16M
-#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE _16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
-#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
-
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 130 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH 2 /* 16 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_CFI 1
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
-#define CONFIG_ENV_ADDR (0xfff80000 - CONFIG_ENV_SECT_SIZE)
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/74xx_7xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-#ifdef CONFIG_750CX
-#define L2_INIT 0
-#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*------------------------------------------------------------------------
- * Real time clock
- */
-#define CONFIG_RTC_DS1302
-
-
-/*------------------------------------------------------------------------
- * Galileo I2C driver
- */
-#define CONFIG_GT_I2C
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * Copyright (c) 2005 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Alex Bounine , Tundra Semiconductor Corp.
- * Roy Zang , <tie-fei.zang@freescale.com> Freescale Corp.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board specific configuration options for Freescale
- * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Board Configuration Definitions */
-/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
-
-#define CONFIG_MPC7448HPC2
-
-#define CONFIG_74xx
-#define CONFIG_HIGH_BATS /* High BATs supported */
-#define CONFIG_ALTIVEC /* undef to disable */
-
-#define CONFIG_SYS_TEXT_BASE 0xFF000000
-
-#define CONFIG_SYS_BOARD_NAME "MPC7448 HPC II"
-#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
-
-#define CONFIG_SYS_OCN_CLK 133000000 /* 133 MHz */
-#define CONFIG_SYS_BUS_CLK 133000000
-
-#define CONFIG_SYS_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
-
-#undef CONFIG_ECC /* disable ECC support */
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/* Board-specific Initialization Functions to be called */
-#define CONFIG_SYS_BOARD_ASM_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
-
-/*#define CONFIG_SYS_HUSH_PARSER */
-#undef CONFIG_SYS_HUSH_PARSER
-
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_TSI "tsi108@c0000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808"
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * If you have hacked a serial cable onto the second DUART channel,
- * change the CONFIG_SYS_DUART port from 1 to 0 below.
- *
- */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_OCN_CLK * 8
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
-
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#undef CONFIG_BOOTARGS
-/* #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
-
-#if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
- setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
- ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; "
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200"
-#endif
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-
-#define CONFIG_SERIAL "No. 1"
-
-/* Networking Configuration */
-
-#define CONFIG_TSI108_ETH
-#define CONFIG_TSI108_ETH_NUM_PORTS 2
-
-
-#define CONFIG_BOOTFILE "zImage.initrd.elf"
-#define CONFIG_LOADADDR 0x400000
-
-/*-------------------------------------------------------------------------- */
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DATE
-
-
-/*set date in u-boot*/
-#define CONFIG_RTC_M48T35A
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfc000000
-#define CONFIG_SYS_NVRAM_SIZE 0x8000
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_VERSION_VARIABLE 1
-#define CONFIG_TSI108_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
- */
-#undef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* larger space - we have SDRAM initialized */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
-#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
-
-#define CONFIG_SYS_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CONFIG_SYS_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
-
-#define CONFIG_SYS_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
-
-#define CONFIG_SYS_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
-
-#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
-
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* Base Address of Flash device */
-#define CONFIG_SYS_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
-
-#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
-
-#define PCI0_IO_BASE_BOOTM 0xfd000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0x3fffff00
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* u-boot code base */
-#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
-
-/* Peripheral Device section */
-
-/*
- * Resources on the Tsi108
- */
-
-#define CONFIG_SYS_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
-#define CONFIG_SYS_TSI108_CSR_BASE CONFIG_SYS_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
-
-#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
-
-#undef DISABLE_PBM
-
-/*
- * PCI stuff
- *
- */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_TSI108_PCI /* include tsi108 pci support */
-
-#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-/* PCI MEMORY MAP section */
-
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-
-/* PCI Memory Space */
-#define CONFIG_SYS_PCI_MEM_BUS (CONFIG_SYS_PCI_MEM_PHYS)
-#define CONFIG_SYS_PCI_MEM_PHYS (CONFIG_SYS_PCI_MEM32_BASE) /* 0xE0000000 */
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
-
-/* PCI I/O Space */
-#define CONFIG_SYS_PCI_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
-
-#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */
-
-/* PCI Config Space mapping */
-#define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
-#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */
-
-#define CONFIG_SYS_IBAT0U 0xFE0003FF
-#define CONFIG_SYS_IBAT0L 0xFE000002
-
-#define CONFIG_SYS_IBAT1U 0x00007FFF
-#define CONFIG_SYS_IBAT1L 0x00000012
-
-#define CONFIG_SYS_IBAT2U 0x80007FFF
-#define CONFIG_SYS_IBAT2L 0x80000022
-
-#define CONFIG_SYS_IBAT3U 0x00000000
-#define CONFIG_SYS_IBAT3L 0x00000000
-
-#define CONFIG_SYS_IBAT4U 0x00000000
-#define CONFIG_SYS_IBAT4L 0x00000000
-
-#define CONFIG_SYS_IBAT5U 0x00000000
-#define CONFIG_SYS_IBAT5L 0x00000000
-
-#define CONFIG_SYS_IBAT6U 0x00000000
-#define CONFIG_SYS_IBAT6L 0x00000000
-
-#define CONFIG_SYS_IBAT7U 0x00000000
-#define CONFIG_SYS_IBAT7L 0x00000000
-
-#define CONFIG_SYS_DBAT0U 0xE0003FFF
-#define CONFIG_SYS_DBAT0L 0xE000002A
-
-#define CONFIG_SYS_DBAT1U 0x00007FFF
-#define CONFIG_SYS_DBAT1L 0x00000012
-
-#define CONFIG_SYS_DBAT2U 0x00000000
-#define CONFIG_SYS_DBAT2L 0x00000000
-
-#define CONFIG_SYS_DBAT3U 0xC0000003
-#define CONFIG_SYS_DBAT3L 0xC000002A
-
-#define CONFIG_SYS_DBAT4U 0x00000000
-#define CONFIG_SYS_DBAT4L 0x00000000
-
-#define CONFIG_SYS_DBAT5U 0x00000000
-#define CONFIG_SYS_DBAT5L 0x00000000
-
-#define CONFIG_SYS_DBAT6U 0x00000000
-#define CONFIG_SYS_DBAT6L 0x00000000
-
-#define CONFIG_SYS_DBAT7U 0x00000000
-#define CONFIG_SYS_DBAT7L 0x00000000
-
-/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR 0x51
-#define DIMM1_I2C_ADDR 0x52
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ }
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-
-#define PHYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_MAX_FLASH_SECT (128)
-
-#define CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_ADDR 0xFC000000
-
-#define CONFIG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-#undef CONFIG_SYS_L2
-
-#define L2_INIT 0
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-#define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * ppmc7xx.h
- * ---------
- *
- * Wind River PPMC 7xx/74xx board configuration file.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- */
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_PPMC7XX
-
-
-/*===================================================================
- *
- * User configurable settings - Modify to your preference
- *
- *===================================================================
- */
-
-/*
- * Debug
- *
- * DEBUG - Define this is you want extra debug info
- * GTREGREAD - Required to build with debug
- * do_bdinfo - Required to build with debug
- */
-
-#ifdef DEBUG
-#define GTREGREAD(x) 0xFFFFFFFF
-#define do_bdinfo(a,b,c,d)
-#endif
-
-/*
- * CPU type
- *
- * CONFIG_7xx - We have a 750 or 755 CPU
- * CONFIG_74xx - We have a 7400 CPU
- * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
- * CONFIG_BUS_CLK - System bus clock in Hz
- */
-
-#define CONFIG_7xx
-#undef CONFIG_74xx
-#undef CONFIG_ALTIVEC
-#define CONFIG_BUS_CLK 66000000
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#ifndef __ASSEMBLY__
-#include <galileo/core.h>
-#endif
-
-/*
- * Monitor configuration
- *
- * List of command sets to include in shell
- *
- * The following command sets have been tested and known to work:
- *
- * CMD_CACHE - Cache control commands
- * CMD_MEMORY - Memory display, change and test commands
- * CMD_FLASH - Erase and program flash
- * CMD_ENV - Environment commands
- * CMD_RUN - Run commands stored in env vars
- * CMD_ELF - Load ELF files
- * CMD_NET - Networking/file download commands
- * CMD_PIN - ICMP Echo Request command
- * CMD_PCI - PCI Bus scanning command
- */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PCI
-
-#undef CONFIG_CMD_KGDB
-
-
-/*
- * Serial configuration
- *
- * CONFIG_CONS_INDEX - Serial console port number (COM1)
- * CONFIG_BAUDRATE - Serial speed
- */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-
-/*
- * PCI config
- *
- * CONFIG_PCI - Enable PCI bus
- * CONFIG_PCI_PNP - Enable Plug & Play support
- * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
- */
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#undef CONFIG_PCI_SCAN_SHOW
-
-
-/*
- * Network config
- *
- * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
- * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
- */
-
-#define CONFIG_EEPRO100
-#define CONFIG_EEPRO100_SROM_WRITE
-
-
-/*
- * Enable extra init functions
- *
- * CONFIG_MISC_INIT_F - Call pre-relocation init functions
- * CONFIG_MISC_INIT_R - Call post relocation init functions
- */
-
-#undef CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
-
-
-/*
- * Boot config
- *
- * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
- * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
- */
-
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
- "bootm"
-#define CONFIG_BOOTDELAY 5
-
-
-/*===================================================================
- *
- * Board configuration settings - You should not need to modify these
- *
- *===================================================================
- */
-
-
-/*
- * Memory map
- *
- * This board runs in a standard CHRP (Map-B) configuration.
- *
- * Type Start End Size Width Chip Sel
- * ----------- ----------- ----------- ------- ------- --------
- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
- * User LED's 0x78000000 RCS3
- * UART 0x7C000000 RCS2
- * Mailbox 0xFF000000 RCS1
- * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
- *
- * Flash sectors are laid out as follows.
- *
- * Sector Start End Size Comments
- * ------- ----------- ----------- ------- -----------
- * 0 0xFFC00000 0xFFC3FFFF 256KB
- * 1 0xFFC40000 0xFFC7FFFF 256KB
- * 2 0xFFC80000 0xFFCBFFFF 256KB
- * 3 0xFFCC0000 0xFFCFFFFF 256KB
- * 4 0xFFD00000 0xFFD3FFFF 256KB
- * 5 0xFFD40000 0xFFD7FFFF 256KB
- * 6 0xFFD80000 0xFFDBFFFF 256KB
- * 7 0xFFDC0000 0xFFDFFFFF 256KB
- * 8 0xFFE00000 0xFFE3FFFF 256KB
- * 9 0xFFE40000 0xFFE7FFFF 256KB
- * 10 0xFFE80000 0xFFEBFFFF 256KB
- * 11 0xFFEC0000 0xFFEFFFFF 256KB
- * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
- * 13 0xFFF40000 0xFFF7FFFF 256KB
- * 14 0xFFF80000 0xFFFBFFFF 256KB
- * 15 0xFFFC0000 0xFFFDFFFF 128KB
- * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
- * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
- * 18 0xFFFF0000 0xFFFFFFFF 64KB
- */
-
-
-/*
- * SDRAM config - see memory map details above.
- *
- * CONFIG_SYS_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
- * CONFIG_SYS_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
- */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000
-
-
-/*
- * Flash config - see memory map details above.
- *
- * CONFIG_SYS_FLASH_BASE - Start address of flash memory
- * CONFIG_SYS_FLASH_SIZE - Total size of contiguous flash mem
- * CONFIG_SYS_FLASH_ERASE_TOUT - Erase timeout in ms
- * CONFIG_SYS_FLASH_WRITE_TOUT - Write timeout in ms
- * CONFIG_SYS_MAX_FLASH_BANKS - Number of banks of flash on board
- * CONFIG_SYS_MAX_FLASH_SECT - Number of sectors in a bank
- */
-
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE 0x00400000
-#define CONFIG_SYS_FLASH_ERASE_TOUT 250000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 5000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-
-/*
- * Monitor config - see memory map details above
- *
- * CONFIG_SYS_MONITOR_BASE - Base address of monitor code
- * CONFIG_SYS_MALLOC_LEN - Size of malloc pool (128KB)
- */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN 0x20000
-
-
-/*
- * Command shell settings
- *
- * CONFIG_SYS_BARGSIZE - Boot Argument buffer size
- * CONFIG_SYS_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB)
- * CONFIG_SYS_CBSIZE - Console Buffer (input) size
- * CONFIG_SYS_LOAD_ADDR - Default load address
- * CONFIG_SYS_LONGHELP - Provide more detailed help
- * CONFIG_SYS_MAXARGS - Number of args accepted by monitor commands
- * CONFIG_SYS_MEMTEST_START - Start address of test to run on RAM
- * CONFIG_SYS_MEMTEST_END - End address of RAM test
- * CONFIG_SYS_PBSIZE - Print Buffer (output) size
- * CONFIG_SYS_PROMPT - Prompt string
- */
-
-#define CONFIG_SYS_BARGSIZE 1024
-#define CONFIG_SYS_BOOTMAPSZ 0x800000
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_LOAD_ADDR 0x100000
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_MEMTEST_START 0x00040000
-#define CONFIG_SYS_MEMTEST_END 0x00040100
-#define CONFIG_SYS_PBSIZE 1024
-
-
-/*
- * Environment config - see memory map details above
- *
- * CONFIG_ENV_IS_IN_FLASH - The env variables are stored in flash
- * CONFIG_ENV_ADDR - Address of the sector containing env vars
- * CONFIG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB)
- * CONFIG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
- */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0xFFFE0000
-#define CONFIG_ENV_SIZE 0x1000
-#define CONFIG_ENV_ADDR_REDUND 0xFFFE8000
-#define CONFIG_ENV_SIZE_REDUND 0x1000
-#define CONFIG_ENV_SECT_SIZE 0x8000
-
-
-/*
- * Initial RAM config
- *
- * Since the main system RAM is initialised very early, we place the INIT_RAM
- * in the main system RAM just above the exception vectors. The contents are
- * copied to top of RAM by the init code.
- *
- * CONFIG_SYS_INIT_RAM_ADDR - Address of Init RAM, above exception vect
- * CONFIG_SYS_INIT_RAM_SIZE - Size of Init RAM
- * GENERATED_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
- * CONFIG_SYS_GBL_DATA_OFFSET - Start of global data, top of stack
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*
- * Initial BAT config
- *
- * BAT0 - System SDRAM
- * BAT1 - LED's and Serial Port
- * BAT2 - PCI Memory
- * BAT3 - PCI I/O including Flash Memory
- */
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-
-/*
- * Cache config
- *
- * CONFIG_SYS_CACHELINE_SIZE - Size of a cache line (CPU specific)
- * CONFIG_SYS_L2 - L2 cache enabled if defined
- * L2_INIT - L2 cache init flags
- * L2_ENABLE - L2 cache enable flags
- */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#undef CONFIG_SYS_L2
-#define L2_INIT 0
-#define L2_ENABLE 0
-
-
-/*
- * Clocks config
- *
- * CONFIG_SYS_BUS_CLK - Bus clock frequency in Hz
- * CONFIG_SYS_HZ - Decrementer freq in Hz
- */
-
-#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK
-
-
-/*
- * Serial port config
- *
- * CONFIG_SYS_NS16550 - Include the NS16550 driver
- * CONFIG_SYS_NS16550_SERIAL - Include the serial (wrapper) driver
- * CONFIG_SYS_NS16550_CLK - Frequency of reference clock
- * CONFIG_SYS_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
- * CONFIG_SYS_NS16550_COM1 - Base address of 1st serial port
- */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 3686400
-#define CONFIG_SYS_NS16550_REG_SIZE -8
-#define CONFIG_SYS_NS16550_COM1 0x7C000000
-
-
-/*
- * PCI Config - Address Map B (CHRP)
- */
-
-#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x7D000000
-#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
-#define CONFIG_SYS_ISA_MEM_PHYS 0xFD000000
-#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-#define CONFIG_SYS_PCI_IO_BUS 0x00800000
-#define CONFIG_SYS_PCI_IO_PHYS 0xFE800000
-#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-#define CONFIG_SYS_ISA_IO_BUS 0x00000000
-#define CONFIG_SYS_ISA_IO_PHYS 0xFE000000
-#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
-#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
-
-
-/*
- * Extra init functions
- *
- * CONFIG_SYS_BOARD_ASM_INIT - Call assembly init code
- */
-
-#define CONFIG_SYS_BOARD_ASM_INIT
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* Core.h - Basic core logic functions and definitions */
-
-/* Copyright Galileo Technology. */
-
-/*
-DESCRIPTION
-This header file contains simple read/write macros for addressing
-the SDRAM, devices, GT`s internal registers and PCI (using the PCI`s address
-space). The macros take care of Big/Little endian conversions.
-*/
-
-#ifndef __INCcoreh
-#define __INCcoreh
-
-/* includes */
-#include "gt64260R.h"
-#include <stdbool.h>
-
-extern unsigned int INTERNAL_REG_BASE_ADDR;
-
-/*
- * GT-6426x variants
- */
-#define GT_64260 0 /* includes both 64260A and 64260B */
-#define GT_64261 1
-
-#if (CONFIG_SYS_GT_6426x == GT_64260)
-#ifdef CONFIG_ETHER_PORT_MII
-#define GAL_ETH_DEVS 2
-#else
-#define GAL_ETH_DEVS 3
-#endif
-#elif (CONFIG_SYS_GT_6426x == GT_64261)
-#define GAL_ETH_DEVS 2
-#else
-#define GAL_ETH_DEVS 3 /* default to a 64260 */
-#endif
-
-/****************************************/
-/* GENERAL Definitions */
-/****************************************/
-
-#define NO_BIT 0x00000000
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
-#define _1K 0x00000400
-#define _2K 0x00000800
-#define _4K 0x00001000
-#define _8K 0x00002000
-#define _16K 0x00004000
-#define _32K 0x00008000
-#define _64K 0x00010000
-#define _128K 0x00020000
-#define _256K 0x00040000
-#define _512K 0x00080000
-
-#define _1M 0x00100000
-#define _2M 0x00200000
-#define _3M 0x00300000
-#define _4M 0x00400000
-#define _5M 0x00500000
-#define _6M 0x00600000
-#define _7M 0x00700000
-#define _8M 0x00800000
-#define _9M 0x00900000
-#define _10M 0x00a00000
-#define _11M 0x00b00000
-#define _12M 0x00c00000
-#define _13M 0x00d00000
-#define _14M 0x00e00000
-#define _15M 0x00f00000
-#define _16M 0x01000000
-
-#define _32M 0x02000000
-#define _64M 0x04000000
-#define _128M 0x08000000
-#define _256M 0x10000000
-#define _512M 0x20000000
-
-#define _1G 0x40000000
-#define _2G 0x80000000
-
-/* Little to Big endian conversion macros */
-
-#ifdef LE /* Little Endian */
-#define SHORT_SWAP(X) (X)
-#define WORD_SWAP(X) (X)
-#define LONG_SWAP(X) ((l64)(X))
-
-#else /* Big Endian */
-#define SHORT_SWAP(X) ((X <<8 ) | (X >> 8))
-
-#define WORD_SWAP(X) (((X)&0xff)<<24)+ \
- (((X)&0xff00)<<8)+ \
- (((X)&0xff0000)>>8)+ \
- (((X)&0xff000000)>>24)
-
-#define LONG_SWAP(X) ( (l64) (((X)&0xffULL)<<56)+ \
- (((X)&0xff00ULL)<<40)+ \
- (((X)&0xff0000ULL)<<24)+ \
- (((X)&0xff000000ULL)<<8)+ \
- (((X)&0xff00000000ULL)>>8)+ \
- (((X)&0xff0000000000ULL)>>24)+ \
- (((X)&0xff000000000000ULL)>>40)+ \
- (((X)&0xff00000000000000ULL)>>56))
-
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* Those two definitions were defined to be compatible with MIPS */
-#define NONE_CACHEABLE 0x00000000
-#define CACHEABLE 0x00000000
-
-/* 750 cache line */
-#define CACHE_LINE_SIZE 32
-#define CACHELINE_MASK_BITS (CACHE_LINE_SIZE - 1)
-#define CACHELINE_ROUNDUP(A) (((A)+CACHELINE_MASK_BITS) & ~CACHELINE_MASK_BITS)
-
-/* Read/Write to/from GT`s internal registers */
-#define GT_REG_READ(offset, pData) \
-*pData = ( *((volatile unsigned int *)(NONE_CACHEABLE | \
- INTERNAL_REG_BASE_ADDR | (offset))) ) ; \
-*pData = WORD_SWAP(*pData)
-
-#define GTREGREAD(offset) \
- (WORD_SWAP( *((volatile unsigned int *)(NONE_CACHEABLE | \
- INTERNAL_REG_BASE_ADDR | (offset))) ))
-
-#define GT_REG_WRITE(offset, data) \
-*((unsigned int *)( INTERNAL_REG_BASE_ADDR | (offset))) = \
- WORD_SWAP(data)
-
-/* Write 32/16/8 bit */
-#define WRITE_CHAR(address, data) \
- *((unsigned char *)(address)) = data
-#define WRITE_SHORT(address, data) \
- *((unsigned short *)(address)) = data
-#define WRITE_WORD(address, data) \
- *((unsigned int *)(address)) = data
-
-/* Read 32/16/8 bits - returns data in variable. */
-#define READ_CHAR(address, pData) \
- *pData = *((volatile unsigned char *)(address))
-
-#define READ_SHORT(address, pData) \
- *pData = *((volatile unsigned short *)(address))
-
-#define READ_WORD(address, pData) \
- *pData = *((volatile unsigned int *)(address))
-
-/* Read 32/16/8 bit - returns data direct. */
-#define READCHAR(address) \
- *((volatile unsigned char *)((address) | NONE_CACHEABLE))
-
-#define READSHORT(address) \
- *((volatile unsigned short *)((address) | NONE_CACHEABLE))
-
-#define READWORD(address) \
- *((volatile unsigned int *)((address) | NONE_CACHEABLE))
-
-/* Those two Macros were defined to be compatible with MIPS */
-#define VIRTUAL_TO_PHY(x) (((unsigned int)x) & 0xffffffff)
-#define PHY_TO_VIRTUAL(x) (((unsigned int)x) | NONE_CACHEABLE)
-
-/* SET_REG_BITS(regOffset,bits) -
- gets register offset and bits: a 32bit value. It set to logic '1' in the
- internal register the bits which given as an input example:
- SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
- '1' in register 0x840 while the other bits stays as is. */
-#define SET_REG_BITS(regOffset,bits) \
- *(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR | \
- regOffset) |= (unsigned int)WORD_SWAP(bits)
-
-/* RESET_REG_BITS(regOffset,bits) -
- gets register offset and bits: a 32bit value. It set to logic '0' in the
- internal register the bits which given as an input example:
- RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
- '0' in register 0x840 while the other bits stays as is. */
-#define RESET_REG_BITS(regOffset,bits) \
- *(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR \
- | regOffset) &= ~( (unsigned int)WORD_SWAP(bits) )
-
-#endif /* __INCcoreh */
+++ /dev/null
-/* gt64260R.h - GT64260 Internal registers definition file */
-
-/* Copyright - Galileo technology. */
-
-#ifndef __INCgt64260rh
-#define __INCgt64260rh
-
-#ifndef GT64260
-#define GT64260
-#endif
-
-/* CPU MASTER CONTROL REGISTER */
-#define CPU_CONFIGURATION 0x0
-#define CPU_MASTER_CONTROL 0x160
-
-/****************************************/
-/* Processor Address Space */
-/****************************************/
-
-/* Sdram's BAR'S */
-#define SCS_0_LOW_DECODE_ADDRESS 0x008
-#define SCS_0_HIGH_DECODE_ADDRESS 0x010
-#define SCS_1_LOW_DECODE_ADDRESS 0x208
-#define SCS_1_HIGH_DECODE_ADDRESS 0x210
-#define SCS_2_LOW_DECODE_ADDRESS 0x018
-#define SCS_2_HIGH_DECODE_ADDRESS 0x020
-#define SCS_3_LOW_DECODE_ADDRESS 0x218
-#define SCS_3_HIGH_DECODE_ADDRESS 0x220
-/* Devices BAR'S */
-#define CS_0_LOW_DECODE_ADDRESS 0x028
-#define CS_0_HIGH_DECODE_ADDRESS 0x030
-#define CS_1_LOW_DECODE_ADDRESS 0x228
-#define CS_1_HIGH_DECODE_ADDRESS 0x230
-#define CS_2_LOW_DECODE_ADDRESS 0x248
-#define CS_2_HIGH_DECODE_ADDRESS 0x250
-#define CS_3_LOW_DECODE_ADDRESS 0x038
-#define CS_3_HIGH_DECODE_ADDRESS 0x040
-#define BOOTCS_LOW_DECODE_ADDRESS 0x238
-#define BOOTCS_HIGH_DECODE_ADDRESS 0x240
-
-#define PCI_0I_O_LOW_DECODE_ADDRESS 0x048
-#define PCI_0I_O_HIGH_DECODE_ADDRESS 0x050
-#define PCI_0MEMORY0_LOW_DECODE_ADDRESS 0x058
-#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS 0x060
-#define PCI_0MEMORY1_LOW_DECODE_ADDRESS 0x080
-#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS 0x088
-#define PCI_0MEMORY2_LOW_DECODE_ADDRESS 0x258
-#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS 0x260
-#define PCI_0MEMORY3_LOW_DECODE_ADDRESS 0x280
-#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS 0x288
-
-#define PCI_1I_O_LOW_DECODE_ADDRESS 0x090
-#define PCI_1I_O_HIGH_DECODE_ADDRESS 0x098
-#define PCI_1MEMORY0_LOW_DECODE_ADDRESS 0x0a0
-#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS 0x0a8
-#define PCI_1MEMORY1_LOW_DECODE_ADDRESS 0x0b0
-#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS 0x0b8
-#define PCI_1MEMORY2_LOW_DECODE_ADDRESS 0x2a0
-#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS 0x2a8
-#define PCI_1MEMORY3_LOW_DECODE_ADDRESS 0x2b0
-#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS 0x2b8
-
-
-#define INTERNAL_SPACE_DECODE 0x068
-
-#define CPU_0_LOW_DECODE_ADDRESS 0x290
-#define CPU_0_HIGH_DECODE_ADDRESS 0x298
-#define CPU_1_LOW_DECODE_ADDRESS 0x2c0
-#define CPU_1_HIGH_DECODE_ADDRESS 0x2c8
-
-#define PCI_0I_O_ADDRESS_REMAP 0x0f0
-#define PCI_0MEMORY0_ADDRESS_REMAP 0x0f8
-#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP 0x320
-#define PCI_0MEMORY1_ADDRESS_REMAP 0x100
-#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP 0x328
-#define PCI_0MEMORY2_ADDRESS_REMAP 0x2f8
-#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP 0x330
-#define PCI_0MEMORY3_ADDRESS_REMAP 0x300
-#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP 0x338
-
-#define PCI_1I_O_ADDRESS_REMAP 0x108
-#define PCI_1MEMORY0_ADDRESS_REMAP 0x110
-#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP 0x340
-#define PCI_1MEMORY1_ADDRESS_REMAP 0x118
-#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP 0x348
-#define PCI_1MEMORY2_ADDRESS_REMAP 0x310
-#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP 0x350
-#define PCI_1MEMORY3_ADDRESS_REMAP 0x318
-#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP 0x358
-
-
-/****************************************/
-/* CPU Sync Barrier */
-/****************************************/
-
-#define PCI_0SYNC_BARIER_VIRTUAL_REGISTER 0x0c0
-#define PCI_1SYNC_BARIER_VIRTUAL_REGISTER 0x0c8
-
-
-/****************************************/
-/* CPU Access Protect */
-/****************************************/
-
-#define CPU_LOW_PROTECT_ADDRESS_0 0x180
-#define CPU_HIGH_PROTECT_ADDRESS_0 0x188
-#define CPU_LOW_PROTECT_ADDRESS_1 0x190
-#define CPU_HIGH_PROTECT_ADDRESS_1 0x198
-#define CPU_LOW_PROTECT_ADDRESS_2 0x1a0
-#define CPU_HIGH_PROTECT_ADDRESS_2 0x1a8
-#define CPU_LOW_PROTECT_ADDRESS_3 0x1b0
-#define CPU_HIGH_PROTECT_ADDRESS_3 0x1b8
-#define CPU_LOW_PROTECT_ADDRESS_4 0x1c0
-#define CPU_HIGH_PROTECT_ADDRESS_4 0x1c8
-#define CPU_LOW_PROTECT_ADDRESS_5 0x1d0
-#define CPU_HIGH_PROTECT_ADDRESS_5 0x1d8
-#define CPU_LOW_PROTECT_ADDRESS_6 0x1e0
-#define CPU_HIGH_PROTECT_ADDRESS_6 0x1e8
-#define CPU_LOW_PROTECT_ADDRESS_7 0x1f0
-#define CPU_HIGH_PROTECT_ADDRESS_7 0x1f8
-
-
-/****************************************/
-/* Snoop Control */
-/****************************************/
-
-#define SNOOP_BASE_ADDRESS_0 0x380
-#define SNOOP_TOP_ADDRESS_0 0x388
-#define SNOOP_BASE_ADDRESS_1 0x390
-#define SNOOP_TOP_ADDRESS_1 0x398
-#define SNOOP_BASE_ADDRESS_2 0x3a0
-#define SNOOP_TOP_ADDRESS_2 0x3a8
-#define SNOOP_BASE_ADDRESS_3 0x3b0
-#define SNOOP_TOP_ADDRESS_3 0x3b8
-
-/****************************************/
-/* CPU Error Report */
-/****************************************/
-
-#define CPU_ERROR_ADDRESS_LOW 0x070
-#define CPU_ERROR_ADDRESS_HIGH 0x078
-#define CPU_ERROR_DATA_LOW 0x128
-#define CPU_ERROR_DATA_HIGH 0x130
-#define CPU_ERROR_PARITY 0x138
-#define CPU_ERROR_CAUSE 0x140
-#define CPU_ERROR_MASK 0x148
-
-/****************************************/
-/* Pslave Debug */
-/****************************************/
-
-#define X_0_ADDRESS 0x360
-#define X_0_COMMAND_ID 0x368
-#define X_1_ADDRESS 0x370
-#define X_1_COMMAND_ID 0x378
-#define WRITE_DATA_LOW 0x3c0
-#define WRITE_DATA_HIGH 0x3c8
-#define WRITE_BYTE_ENABLE 0x3e0
-#define READ_DATA_LOW 0x3d0
-#define READ_DATA_HIGH 0x3d8
-#define READ_ID 0x3e8
-
-
-/****************************************/
-/* SDRAM and Device Address Space */
-/****************************************/
-
-
-/****************************************/
-/* SDRAM Configuration */
-/****************************************/
-
-
-#define SDRAM_CONFIGURATION 0x448
-#define SDRAM_OPERATION_MODE 0x474
-#define SDRAM_ADDRESS_DECODE 0x47c
-#define SDRAM_UMA_CONTROL 0x4a4
-#define SDRAM_CROSS_BAR_CONTROL_LOW 0x4a8
-#define SDRAM_CROSS_BAR_CONTROL_HIGH 0x4ac
-#define SDRAM_CROSS_BAR_TIMEOUT 0x4b0
-#define SDRAM_TIMING 0x4b4
-
-
-/****************************************/
-/* SDRAM Parameters */
-/****************************************/
-
-#define SDRAM_BANK0PARAMETERS 0x44C
-#define SDRAM_BANK1PARAMETERS 0x450
-#define SDRAM_BANK2PARAMETERS 0x454
-#define SDRAM_BANK3PARAMETERS 0x458
-
-
-/****************************************/
-/* SDRAM Error Report */
-/****************************************/
-
-#define SDRAM_ERROR_DATA_LOW 0x484
-#define SDRAM_ERROR_DATA_HIGH 0x480
-#define SDRAM_AND_DEVICE_ERROR_ADDRESS 0x490
-#define SDRAM_RECEIVED_ECC 0x488
-#define SDRAM_CALCULATED_ECC 0x48c
-#define SDRAM_ECC_CONTROL 0x494
-#define SDRAM_ECC_ERROR_COUNTER 0x498
-
-
-/****************************************/
-/* SDunit Debug (for internal use) */
-/****************************************/
-
-#define X0_ADDRESS 0x500
-#define X0_COMMAND_AND_ID 0x504
-#define X0_WRITE_DATA_LOW 0x508
-#define X0_WRITE_DATA_HIGH 0x50c
-#define X0_WRITE_BYTE_ENABLE 0x518
-#define X0_READ_DATA_LOW 0x510
-#define X0_READ_DATA_HIGH 0x514
-#define X0_READ_ID 0x51c
-#define X1_ADDRESS 0x520
-#define X1_COMMAND_AND_ID 0x524
-#define X1_WRITE_DATA_LOW 0x528
-#define X1_WRITE_DATA_HIGH 0x52c
-#define X1_WRITE_BYTE_ENABLE 0x538
-#define X1_READ_DATA_LOW 0x530
-#define X1_READ_DATA_HIGH 0x534
-#define X1_READ_ID 0x53c
-#define X0_SNOOP_ADDRESS 0x540
-#define X0_SNOOP_COMMAND 0x544
-#define X1_SNOOP_ADDRESS 0x548
-#define X1_SNOOP_COMMAND 0x54c
-
-
-/****************************************/
-/* Device Parameters */
-/****************************************/
-
-#define DEVICE_BANK0PARAMETERS 0x45c
-#define DEVICE_BANK1PARAMETERS 0x460
-#define DEVICE_BANK2PARAMETERS 0x464
-#define DEVICE_BANK3PARAMETERS 0x468
-#define DEVICE_BOOT_BANK_PARAMETERS 0x46c
-#define DEVICE_CONTROL 0x4c0
-#define DEVICE_CROSS_BAR_CONTROL_LOW 0x4c8
-#define DEVICE_CROSS_BAR_CONTROL_HIGH 0x4cc
-#define DEVICE_CROSS_BAR_TIMEOUT 0x4c4
-
-
-/****************************************/
-/* Device Interrupt */
-/****************************************/
-
-#define DEVICE_INTERRUPT_CAUSE 0x4d0
-#define DEVICE_INTERRUPT_MASK 0x4d4
-#define DEVICE_ERROR_ADDRESS 0x4d8
-
-/****************************************/
-/* DMA Record */
-/****************************************/
-
-#define CHANNEL0_DMA_BYTE_COUNT 0x800
-#define CHANNEL1_DMA_BYTE_COUNT 0x804
-#define CHANNEL2_DMA_BYTE_COUNT 0x808
-#define CHANNEL3_DMA_BYTE_COUNT 0x80C
-#define CHANNEL4_DMA_BYTE_COUNT 0x900
-#define CHANNEL5_DMA_BYTE_COUNT 0x904
-#define CHANNEL6_DMA_BYTE_COUNT 0x908
-#define CHANNEL7_DMA_BYTE_COUNT 0x90C
-#define CHANNEL0_DMA_SOURCE_ADDRESS 0x810
-#define CHANNEL1_DMA_SOURCE_ADDRESS 0x814
-#define CHANNEL2_DMA_SOURCE_ADDRESS 0x818
-#define CHANNEL3_DMA_SOURCE_ADDRESS 0x81C
-#define CHANNEL4_DMA_SOURCE_ADDRESS 0x910
-#define CHANNEL5_DMA_SOURCE_ADDRESS 0x914
-#define CHANNEL6_DMA_SOURCE_ADDRESS 0x918
-#define CHANNEL7_DMA_SOURCE_ADDRESS 0x91C
-#define CHANNEL0_DMA_DESTINATION_ADDRESS 0x820
-#define CHANNEL1_DMA_DESTINATION_ADDRESS 0x824
-#define CHANNEL2_DMA_DESTINATION_ADDRESS 0x828
-#define CHANNEL3_DMA_DESTINATION_ADDRESS 0x82C
-#define CHANNEL4_DMA_DESTINATION_ADDRESS 0x920
-#define CHANNEL5_DMA_DESTINATION_ADDRESS 0x924
-#define CHANNEL6_DMA_DESTINATION_ADDRESS 0x928
-#define CHANNEL7_DMA_DESTINATION_ADDRESS 0x92C
-#define CHANNEL0NEXT_RECORD_POINTER 0x830
-#define CHANNEL1NEXT_RECORD_POINTER 0x834
-#define CHANNEL2NEXT_RECORD_POINTER 0x838
-#define CHANNEL3NEXT_RECORD_POINTER 0x83C
-#define CHANNEL4NEXT_RECORD_POINTER 0x930
-#define CHANNEL5NEXT_RECORD_POINTER 0x934
-#define CHANNEL6NEXT_RECORD_POINTER 0x938
-#define CHANNEL7NEXT_RECORD_POINTER 0x93C
-#define CHANNEL0CURRENT_DESCRIPTOR_POINTER 0x870
-#define CHANNEL1CURRENT_DESCRIPTOR_POINTER 0x874
-#define CHANNEL2CURRENT_DESCRIPTOR_POINTER 0x878
-#define CHANNEL3CURRENT_DESCRIPTOR_POINTER 0x87C
-#define CHANNEL4CURRENT_DESCRIPTOR_POINTER 0x970
-#define CHANNEL5CURRENT_DESCRIPTOR_POINTER 0x974
-#define CHANNEL6CURRENT_DESCRIPTOR_POINTER 0x978
-#define CHANNEL7CURRENT_DESCRIPTOR_POINTER 0x97C
-#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS 0x890
-#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS 0x894
-#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS 0x898
-#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS 0x89c
-#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS 0x990
-#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS 0x994
-#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS 0x998
-#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS 0x99c
-#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a0
-#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a4
-#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a8
-#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8ac
-#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a0
-#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a4
-#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a8
-#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9ac
-#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b0
-#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b4
-#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b8
-#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8bc
-#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b0
-#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b4
-#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b8
-#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9bc
-
-/****************************************/
-/* DMA Channel Control */
-/****************************************/
-
-#define CHANNEL0CONTROL 0x840
-#define CHANNEL0CONTROL_HIGH 0x880
-#define CHANNEL1CONTROL 0x844
-#define CHANNEL1CONTROL_HIGH 0x884
-#define CHANNEL2CONTROL 0x848
-#define CHANNEL2CONTROL_HIGH 0x888
-#define CHANNEL3CONTROL 0x84C
-#define CHANNEL3CONTROL_HIGH 0x88C
-
-#define CHANNEL4CONTROL 0x940
-#define CHANNEL4CONTROL_HIGH 0x980
-#define CHANNEL5CONTROL 0x944
-#define CHANNEL5CONTROL_HIGH 0x984
-#define CHANNEL6CONTROL 0x948
-#define CHANNEL6CONTROL_HIGH 0x988
-#define CHANNEL7CONTROL 0x94C
-#define CHANNEL7CONTROL_HIGH 0x98C
-
-
-/****************************************/
-/* DMA Arbiter */
-/****************************************/
-
-#define ARBITER_CONTROL_0_3 0x860
-#define ARBITER_CONTROL_4_7 0x960
-
-
-/****************************************/
-/* DMA Interrupt */
-/****************************************/
-
-#define CHANELS0_3_INTERRUPT_CAUSE 0x8c0
-#define CHANELS0_3_INTERRUPT_MASK 0x8c4
-#define CHANELS0_3_ERROR_ADDRESS 0x8c8
-#define CHANELS0_3_ERROR_SELECT 0x8cc
-#define CHANELS4_7_INTERRUPT_CAUSE 0x9c0
-#define CHANELS4_7_INTERRUPT_MASK 0x9c4
-#define CHANELS4_7_ERROR_ADDRESS 0x9c8
-#define CHANELS4_7_ERROR_SELECT 0x9cc
-
-
-/****************************************/
-/* DMA Debug (for internal use) */
-/****************************************/
-
-#define DMA_X0_ADDRESS 0x8e0
-#define DMA_X0_COMMAND_AND_ID 0x8e4
-#define DMA_X0_WRITE_DATA_LOW 0x8e8
-#define DMA_X0_WRITE_DATA_HIGH 0x8ec
-#define DMA_X0_WRITE_BYTE_ENABLE 0x8f8
-#define DMA_X0_READ_DATA_LOW 0x8f0
-#define DMA_X0_READ_DATA_HIGH 0x8f4
-#define DMA_X0_READ_ID 0x8fc
-#define DMA_X1_ADDRESS 0x9e0
-#define DMA_X1_COMMAND_AND_ID 0x9e4
-#define DMA_X1_WRITE_DATA_LOW 0x9e8
-#define DMA_X1_WRITE_DATA_HIGH 0x9ec
-#define DMA_X1_WRITE_BYTE_ENABLE 0x9f8
-#define DMA_X1_READ_DATA_LOW 0x9f0
-#define DMA_X1_READ_DATA_HIGH 0x9f4
-#define DMA_X1_READ_ID 0x9fc
-
-/****************************************/
-/* Timer_Counter */
-/****************************************/
-
-#define TIMER_COUNTER0 0x850
-#define TIMER_COUNTER1 0x854
-#define TIMER_COUNTER2 0x858
-#define TIMER_COUNTER3 0x85C
-#define TIMER_COUNTER_0_3_CONTROL 0x864
-#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
-#define TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
-#define TIMER_COUNTER4 0x950
-#define TIMER_COUNTER5 0x954
-#define TIMER_COUNTER6 0x958
-#define TIMER_COUNTER7 0x95C
-#define TIMER_COUNTER_4_7_CONTROL 0x964
-#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE 0x968
-#define TIMER_COUNTER_4_7_INTERRUPT_MASK 0x96c
-
-/****************************************/
-/* PCI Slave Address Decoding */
-/****************************************/
-
-#define PCI_0SCS_0_BANK_SIZE 0xc08
-#define PCI_1SCS_0_BANK_SIZE 0xc88
-#define PCI_0SCS_1_BANK_SIZE 0xd08
-#define PCI_1SCS_1_BANK_SIZE 0xd88
-#define PCI_0SCS_2_BANK_SIZE 0xc0c
-#define PCI_1SCS_2_BANK_SIZE 0xc8c
-#define PCI_0SCS_3_BANK_SIZE 0xd0c
-#define PCI_1SCS_3_BANK_SIZE 0xd8c
-#define PCI_0CS_0_BANK_SIZE 0xc10
-#define PCI_1CS_0_BANK_SIZE 0xc90
-#define PCI_0CS_1_BANK_SIZE 0xd10
-#define PCI_1CS_1_BANK_SIZE 0xd90
-#define PCI_0CS_2_BANK_SIZE 0xd18
-#define PCI_1CS_2_BANK_SIZE 0xd98
-#define PCI_0CS_3_BANK_SIZE 0xc14
-#define PCI_1CS_3_BANK_SIZE 0xc94
-#define PCI_0CS_BOOT_BANK_SIZE 0xd14
-#define PCI_1CS_BOOT_BANK_SIZE 0xd94
-#define PCI_0P2P_MEM0_BAR_SIZE 0xd1c
-#define PCI_1P2P_MEM0_BAR_SIZE 0xd9c
-#define PCI_0P2P_MEM1_BAR_SIZE 0xd20
-#define PCI_1P2P_MEM1_BAR_SIZE 0xda0
-#define PCI_0P2P_I_O_BAR_SIZE 0xd24
-#define PCI_1P2P_I_O_BAR_SIZE 0xda4
-#define PCI_0CPU_BAR_SIZE 0xd28
-#define PCI_1CPU_BAR_SIZE 0xda8
-#define PCI_0DAC_SCS_0_BANK_SIZE 0xe00
-#define PCI_1DAC_SCS_0_BANK_SIZE 0xe80
-#define PCI_0DAC_SCS_1_BANK_SIZE 0xe04
-#define PCI_1DAC_SCS_1_BANK_SIZE 0xe84
-#define PCI_0DAC_SCS_2_BANK_SIZE 0xe08
-#define PCI_1DAC_SCS_2_BANK_SIZE 0xe88
-#define PCI_0DAC_SCS_3_BANK_SIZE 0xe0c
-#define PCI_1DAC_SCS_3_BANK_SIZE 0xe8c
-#define PCI_0DAC_CS_0_BANK_SIZE 0xe10
-#define PCI_1DAC_CS_0_BANK_SIZE 0xe90
-#define PCI_0DAC_CS_1_BANK_SIZE 0xe14
-#define PCI_1DAC_CS_1_BANK_SIZE 0xe94
-#define PCI_0DAC_CS_2_BANK_SIZE 0xe18
-#define PCI_1DAC_CS_2_BANK_SIZE 0xe98
-#define PCI_0DAC_CS_3_BANK_SIZE 0xe1c
-#define PCI_1DAC_CS_3_BANK_SIZE 0xe9c
-#define PCI_0DAC_BOOTCS_BANK_SIZE 0xe20
-#define PCI_1DAC_BOOTCS_BANK_SIZE 0xea0
-#define PCI_0DAC_P2P_MEM0_BAR_SIZE 0xe24
-#define PCI_1DAC_P2P_MEM0_BAR_SIZE 0xea4
-#define PCI_0DAC_P2P_MEM1_BAR_SIZE 0xe28
-#define PCI_1DAC_P2P_MEM1_BAR_SIZE 0xea8
-#define PCI_0DAC_CPU_BAR_SIZE 0xe2c
-#define PCI_1DAC_CPU_BAR_SIZE 0xeac
-#define PCI_0EXPANSION_ROM_BAR_SIZE 0xd2c
-#define PCI_1EXPANSION_ROM_BAR_SIZE 0xdac
-#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE 0xc3c
-#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE 0xcbc
-#define PCI_0SCS_0_BASE_ADDRESS_REMAP 0xc48
-#define PCI_1SCS_0_BASE_ADDRESS_REMAP 0xcc8
-#define PCI_0SCS_1_BASE_ADDRESS_REMAP 0xd48
-#define PCI_1SCS_1_BASE_ADDRESS_REMAP 0xdc8
-#define PCI_0SCS_2_BASE_ADDRESS_REMAP 0xc4c
-#define PCI_1SCS_2_BASE_ADDRESS_REMAP 0xccc
-#define PCI_0SCS_3_BASE_ADDRESS_REMAP 0xd4c
-#define PCI_1SCS_3_BASE_ADDRESS_REMAP 0xdcc
-#define PCI_0CS_0_BASE_ADDRESS_REMAP 0xc50
-#define PCI_1CS_0_BASE_ADDRESS_REMAP 0xcd0
-#define PCI_0CS_1_BASE_ADDRESS_REMAP 0xd50
-#define PCI_1CS_1_BASE_ADDRESS_REMAP 0xdd0
-#define PCI_0CS_2_BASE_ADDRESS_REMAP 0xd58
-#define PCI_1CS_2_BASE_ADDRESS_REMAP 0xdd8
-#define PCI_0CS_3_BASE_ADDRESS_REMAP 0xc54
-#define PCI_1CS_3_BASE_ADDRESS_REMAP 0xcd4
-#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP 0xd54
-#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP 0xdd4
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xd5c
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xddc
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xd60
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xde0
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xd64
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xde4
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xd68
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xde8
-#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP 0xd6c
-#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP 0xdec
-#define PCI_0CPU_BASE_ADDRESS_REMAP 0xd70
-#define PCI_1CPU_BASE_ADDRESS_REMAP 0xdf0
-#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP 0xf00
-#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP 0xff0
-#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP 0xf04
-#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP 0xf84
-#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP 0xf08
-#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP 0xf88
-#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP 0xf0c
-#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP 0xf8c
-#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP 0xf10
-#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP 0xf90
-#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP 0xf14
-#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP 0xf94
-#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP 0xf18
-#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP 0xf98
-#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP 0xf1c
-#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP 0xf9c
-#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP 0xf20
-#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP 0xfa0
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xf24
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xfa4
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xf28
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xfa8
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xf2c
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xfac
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xf30
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xfb0
-#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP 0xf34
-#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP 0xfb4
-#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP 0xf38
-#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP 0xfb8
-#define PCI_0ADDRESS_DECODE_CONTROL 0xd3c
-#define PCI_1ADDRESS_DECODE_CONTROL 0xdbc
-
-/****************************************/
-/* PCI Control */
-/****************************************/
-
-#define PCI_0COMMAND 0xc00
-#define PCI_1COMMAND 0xc80
-#define PCI_0MODE 0xd00
-#define PCI_1MODE 0xd80
-#define PCI_0TIMEOUT_RETRY 0xc04
-#define PCI_1TIMEOUT_RETRY 0xc84
-#define PCI_0READ_BUFFER_DISCARD_TIMER 0xd04
-#define PCI_1READ_BUFFER_DISCARD_TIMER 0xd84
-#define MSI_0TRIGGER_TIMER 0xc38
-#define MSI_1TRIGGER_TIMER 0xcb8
-#define PCI_0ARBITER_CONTROL 0x1d00
-#define PCI_1ARBITER_CONTROL 0x1d80
-/* changing untill here */
-#define PCI_0CROSS_BAR_CONTROL_LOW 0x1d08
-#define PCI_0CROSS_BAR_CONTROL_HIGH 0x1d0c
-#define PCI_0CROSS_BAR_TIMEOUT 0x1d04
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d18
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d1c
-#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER 0x1d10
-#define PCI_0P2P_CONFIGURATION 0x1d14
-#define PCI_0ACCESS_CONTROL_BASE_0_LOW 0x1e00
-#define PCI_0ACCESS_CONTROL_BASE_0_HIGH 0x1e04
-#define PCI_0ACCESS_CONTROL_TOP_0 0x1e08
-#define PCI_0ACCESS_CONTROL_BASE_1_LOW 0x1e10
-#define PCI_0ACCESS_CONTROL_BASE_1_HIGH 0x1e14
-#define PCI_0ACCESS_CONTROL_TOP_1 0x1e18
-#define PCI_0ACCESS_CONTROL_BASE_2_LOW 0x1e20
-#define PCI_0ACCESS_CONTROL_BASE_2_HIGH 0x1e24
-#define PCI_0ACCESS_CONTROL_TOP_2 0x1e28
-#define PCI_0ACCESS_CONTROL_BASE_3_LOW 0x1e30
-#define PCI_0ACCESS_CONTROL_BASE_3_HIGH 0x1e34
-#define PCI_0ACCESS_CONTROL_TOP_3 0x1e38
-#define PCI_0ACCESS_CONTROL_BASE_4_LOW 0x1e40
-#define PCI_0ACCESS_CONTROL_BASE_4_HIGH 0x1e44
-#define PCI_0ACCESS_CONTROL_TOP_4 0x1e48
-#define PCI_0ACCESS_CONTROL_BASE_5_LOW 0x1e50
-#define PCI_0ACCESS_CONTROL_BASE_5_HIGH 0x1e54
-#define PCI_0ACCESS_CONTROL_TOP_5 0x1e58
-#define PCI_0ACCESS_CONTROL_BASE_6_LOW 0x1e60
-#define PCI_0ACCESS_CONTROL_BASE_6_HIGH 0x1e64
-#define PCI_0ACCESS_CONTROL_TOP_6 0x1e68
-#define PCI_0ACCESS_CONTROL_BASE_7_LOW 0x1e70
-#define PCI_0ACCESS_CONTROL_BASE_7_HIGH 0x1e74
-#define PCI_0ACCESS_CONTROL_TOP_7 0x1e78
-#define PCI_1CROSS_BAR_CONTROL_LOW 0x1d88
-#define PCI_1CROSS_BAR_CONTROL_HIGH 0x1d8c
-#define PCI_1CROSS_BAR_TIMEOUT 0x1d84
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d98
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d9c
-#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER 0x1d90
-#define PCI_1P2P_CONFIGURATION 0x1d94
-#define PCI_1ACCESS_CONTROL_BASE_0_LOW 0x1e80
-#define PCI_1ACCESS_CONTROL_BASE_0_HIGH 0x1e84
-#define PCI_1ACCESS_CONTROL_TOP_0 0x1e88
-#define PCI_1ACCESS_CONTROL_BASE_1_LOW 0x1e90
-#define PCI_1ACCESS_CONTROL_BASE_1_HIGH 0x1e94
-#define PCI_1ACCESS_CONTROL_TOP_1 0x1e98
-#define PCI_1ACCESS_CONTROL_BASE_2_LOW 0x1ea0
-#define PCI_1ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
-#define PCI_1ACCESS_CONTROL_TOP_2 0x1ea8
-#define PCI_1ACCESS_CONTROL_BASE_3_LOW 0x1eb0
-#define PCI_1ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
-#define PCI_1ACCESS_CONTROL_TOP_3 0x1eb8
-#define PCI_1ACCESS_CONTROL_BASE_4_LOW 0x1ec0
-#define PCI_1ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
-#define PCI_1ACCESS_CONTROL_TOP_4 0x1ec8
-#define PCI_1ACCESS_CONTROL_BASE_5_LOW 0x1ed0
-#define PCI_1ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
-#define PCI_1ACCESS_CONTROL_TOP_5 0x1ed8
-#define PCI_1ACCESS_CONTROL_BASE_6_LOW 0x1ee0
-#define PCI_1ACCESS_CONTROL_BASE_6_HIGH 0x1ee4
-#define PCI_1ACCESS_CONTROL_TOP_6 0x1ee8
-#define PCI_1ACCESS_CONTROL_BASE_7_LOW 0x1ef0
-#define PCI_1ACCESS_CONTROL_BASE_7_HIGH 0x1ef4
-#define PCI_1ACCESS_CONTROL_TOP_7 0x1ef8
-
-/****************************************/
-/* PCI Snoop Control */
-/****************************************/
-
-#define PCI_0SNOOP_CONTROL_BASE_0_LOW 0x1f00
-#define PCI_0SNOOP_CONTROL_BASE_0_HIGH 0x1f04
-#define PCI_0SNOOP_CONTROL_TOP_0 0x1f08
-#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW 0x1f10
-#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH 0x1f14
-#define PCI_0SNOOP_CONTROL_TOP_1 0x1f18
-#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW 0x1f20
-#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH 0x1f24
-#define PCI_0SNOOP_CONTROL_TOP_2 0x1f28
-#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW 0x1f30
-#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH 0x1f34
-#define PCI_0SNOOP_CONTROL_TOP_3 0x1f38
-#define PCI_1SNOOP_CONTROL_BASE_0_LOW 0x1f80
-#define PCI_1SNOOP_CONTROL_BASE_0_HIGH 0x1f84
-#define PCI_1SNOOP_CONTROL_TOP_0 0x1f88
-#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW 0x1f90
-#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH 0x1f94
-#define PCI_1SNOOP_CONTROL_TOP_1 0x1f98
-#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW 0x1fa0
-#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH 0x1fa4
-#define PCI_1SNOOP_CONTROL_TOP_2 0x1fa8
-#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW 0x1fb0
-#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH 0x1fb4
-#define PCI_1SNOOP_CONTROL_TOP_3 0x1fb8
-
-/****************************************/
-/* PCI Configuration Address */
-/****************************************/
-
-#define PCI_0CONFIGURATION_ADDRESS 0xcf8
-#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER 0xcfc
-#define PCI_1CONFIGURATION_ADDRESS 0xc78
-#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER 0xc7c
-#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xc34
-#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xcb4
-
-/****************************************/
-/* PCI Error Report */
-/****************************************/
-
-#define PCI_0SERR_MASK 0xc28
-#define PCI_0ERROR_ADDRESS_LOW 0x1d40
-#define PCI_0ERROR_ADDRESS_HIGH 0x1d44
-#define PCI_0ERROR_DATA_LOW 0x1d48
-#define PCI_0ERROR_DATA_HIGH 0x1d4c
-#define PCI_0ERROR_COMMAND 0x1d50
-#define PCI_0ERROR_CAUSE 0x1d58
-#define PCI_0ERROR_MASK 0x1d5c
-#define PCI_1SERR_MASK 0xca8
-#define PCI_1ERROR_ADDRESS_LOW 0x1dc0
-#define PCI_1ERROR_ADDRESS_HIGH 0x1dc4
-#define PCI_1ERROR_DATA_LOW 0x1dc8
-#define PCI_1ERROR_DATA_HIGH 0x1dcc
-#define PCI_1ERROR_COMMAND 0x1dd0
-#define PCI_1ERROR_CAUSE 0x1dd8
-#define PCI_1ERROR_MASK 0x1ddc
-
-
-/****************************************/
-/* Lslave Debug (for internal use) */
-/****************************************/
-
-#define L_SLAVE_X0_ADDRESS 0x1d20
-#define L_SLAVE_X0_COMMAND_AND_ID 0x1d24
-#define L_SLAVE_X1_ADDRESS 0x1d28
-#define L_SLAVE_X1_COMMAND_AND_ID 0x1d2c
-#define L_SLAVE_WRITE_DATA_LOW 0x1d30
-#define L_SLAVE_WRITE_DATA_HIGH 0x1d34
-#define L_SLAVE_WRITE_BYTE_ENABLE 0x1d60
-#define L_SLAVE_READ_DATA_LOW 0x1d38
-#define L_SLAVE_READ_DATA_HIGH 0x1d3c
-#define L_SLAVE_READ_ID 0x1d64
-
-/****************************************/
-/* PCI Configuration Function 0 */
-/****************************************/
-
-#define PCI_DEVICE_AND_VENDOR_ID 0x000
-#define PCI_STATUS_AND_COMMAND 0x004
-#define PCI_CLASS_CODE_AND_REVISION_ID 0x008
-#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
-#define PCI_SCS_0_BASE_ADDRESS 0x010
-#define PCI_SCS_1_BASE_ADDRESS 0x014
-#define PCI_SCS_2_BASE_ADDRESS 0x018
-#define PCI_SCS_3_BASE_ADDRESS 0x01C
-#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS 0x020
-#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS 0x024
-#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02C
-#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER 0x030
-#define PCI_CAPABILTY_LIST_POINTER 0x034
-#define PCI_INTERRUPT_PIN_AND_LINE 0x03C
-#define PCI_POWER_MANAGEMENT_CAPABILITY 0x040
-#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
-#define PCI_VPD_ADDRESS 0x048
-#define PCI_VPD_DATA 0x04c
-#define PCI_MSI_MESSAGE_CONTROL 0x050
-#define PCI_MSI_MESSAGE_ADDRESS 0x054
-#define PCI_MSI_MESSAGE_UPPER_ADDRESS 0x058
-#define PCI_MSI_MESSAGE_DATA 0x05c
-#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY 0x058
-
-/****************************************/
-/* PCI Configuration Function 1 */
-/****************************************/
-
-#define PCI_CS_0_BASE_ADDRESS 0x110
-#define PCI_CS_1_BASE_ADDRESS 0x114
-#define PCI_CS_2_BASE_ADDRESS 0x118
-#define PCI_CS_3_BASE_ADDRESS 0x11c
-#define PCI_BOOTCS_BASE_ADDRESS 0x120
-
-/****************************************/
-/* PCI Configuration Function 2 */
-/****************************************/
-
-#define PCI_P2P_MEM0_BASE_ADDRESS 0x210
-#define PCI_P2P_MEM1_BASE_ADDRESS 0x214
-#define PCI_P2P_I_O_BASE_ADDRESS 0x218
-#define PCI_CPU_BASE_ADDRESS 0x21c
-
-/****************************************/
-/* PCI Configuration Function 4 */
-/****************************************/
-
-#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW 0x410
-#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH 0x414
-#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW 0x418
-#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH 0x41c
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW 0x420
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH 0x424
-
-
-/****************************************/
-/* PCI Configuration Function 5 */
-/****************************************/
-
-#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW 0x510
-#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH 0x514
-#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW 0x518
-#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH 0x51c
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW 0x520
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH 0x524
-
-
-/****************************************/
-/* PCI Configuration Function 6 */
-/****************************************/
-
-#define PCI_DAC_CS_0_BASE_ADDRESS_LOW 0x610
-#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH 0x614
-#define PCI_DAC_CS_1_BASE_ADDRESS_LOW 0x618
-#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH 0x61c
-#define PCI_DAC_CS_2_BASE_ADDRESS_LOW 0x620
-#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH 0x624
-
-/****************************************/
-/* PCI Configuration Function 7 */
-/****************************************/
-
-#define PCI_DAC_CS_3_BASE_ADDRESS_LOW 0x710
-#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH 0x714
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW 0x718
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH 0x71c
-#define PCI_DAC_CPU_BASE_ADDRESS_LOW 0x720
-#define PCI_DAC_CPU_BASE_ADDRESS_HIGH 0x724
-
-/****************************************/
-/* Interrupts */
-/****************************************/
-
-#define LOW_INTERRUPT_CAUSE_REGISTER 0xc18
-#define HIGH_INTERRUPT_CAUSE_REGISTER 0xc68
-#define CPU_INTERRUPT_MASK_REGISTER_LOW 0xc1c
-#define CPU_INTERRUPT_MASK_REGISTER_HIGH 0xc6c
-#define CPU_SELECT_CAUSE_REGISTER 0xc70
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xc24
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xc64
-#define PCI_0SELECT_CAUSE 0xc74
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xca4
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xce4
-#define PCI_1SELECT_CAUSE 0xcf4
-#define CPU_INT_0_MASK 0xe60
-#define CPU_INT_1_MASK 0xe64
-#define CPU_INT_2_MASK 0xe68
-#define CPU_INT_3_MASK 0xe6c
-
-/****************************************/
-/* I20 Support registers */
-/****************************************/
-
-#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010
-#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014
-#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018
-#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01C
-#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024
-#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028
-#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044
-#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050
-#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064
-#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068
-#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07C
-
-#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C10
-#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C14
-#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C18
-#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C1C
-#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C20
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C24
-#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C28
-#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C2C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C30
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C34
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C40
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C44
-#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1C50
-#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1C54
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C60
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C64
-#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C68
-#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C6C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C70
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C74
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C78
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C7C
-
-/****************************************/
-/* Communication Unit Registers */
-/****************************************/
-
-#define ETHERNET_0_ADDRESS_CONTROL_LOW 0xf200
-#define ETHERNET_0_ADDRESS_CONTROL_HIGH 0xf204
-#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf208
-#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf20c
-#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf210
-#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf214
-#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS 0xf218
-#define ETHERNET_1_ADDRESS_CONTROL_LOW 0xf220
-#define ETHERNET_1_ADDRESS_CONTROL_HIGH 0xf224
-#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf228
-#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf22c
-#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf230
-#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf234
-#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS 0xf238
-#define ETHERNET_2_ADDRESS_CONTROL_LOW 0xf240
-#define ETHERNET_2_ADDRESS_CONTROL_HIGH 0xf244
-#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf248
-#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf24c
-#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf250
-#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf254
-#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS 0xf258
-#define MPSC_0_ADDRESS_CONTROL_LOW 0xf280
-#define MPSC_0_ADDRESS_CONTROL_HIGH 0xf284
-#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf288
-#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf28c
-#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf290
-#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf294
-#define MPSC_1_ADDRESS_CONTROL_LOW 0xf2c0
-#define MPSC_1_ADDRESS_CONTROL_HIGH 0xf2c4
-#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf2c8
-#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf2cc
-#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d0
-#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d4
-#define SERIAL_INIT_PCI_HIGH_ADDRESS 0xf320
-#define SERIAL_INIT_LAST_DATA 0xf324
-#define SERIAL_INIT_STATUS_AND_CONTROL 0xf328
-#define COMM_UNIT_ARBITER_CONTROL 0xf300
-#define COMM_UNIT_CROSS_BAR_TIMEOUT 0xf304
-#define COMM_UNIT_INTERRUPT_CAUSE 0xf310
-#define COMM_UNIT_INTERRUPT_MASK 0xf314
-#define COMM_UNIT_ERROR_ADDRESS 0xf314
-
-/****************************************/
-/* Cunit Debug (for internal use) */
-/****************************************/
-
-#define CUNIT_ADDRESS 0xf340
-#define CUNIT_COMMAND_AND_ID 0xf344
-#define CUNIT_WRITE_DATA_LOW 0xf348
-#define CUNIT_WRITE_DATA_HIGH 0xf34c
-#define CUNIT_WRITE_BYTE_ENABLE 0xf358
-#define CUNIT_READ_DATA_LOW 0xf350
-#define CUNIT_READ_DATA_HIGH 0xf354
-#define CUNIT_READ_ID 0xf35c
-
-/****************************************/
-/* Fast Ethernet Unit Registers */
-/****************************************/
-
-/* Ethernet */
-
-#define ETHERNET_PHY_ADDRESS_REGISTER 0x2000
-#define ETHERNET_SMI_REGISTER 0x2010
-
-/* Ethernet 0 */
-
-#define ETHERNET0_PORT_CONFIGURATION_REGISTER 0x2400
-#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER 0x2408
-#define ETHERNET0_PORT_COMMAND_REGISTER 0x2410
-#define ETHERNET0_PORT_STATUS_REGISTER 0x2418
-#define ETHERNET0_SERIAL_PARAMETRS_REGISTER 0x2420
-#define ETHERNET0_HASH_TABLE_POINTER_REGISTER 0x2428
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2430
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2438
-#define ETHERNET0_SDMA_CONFIGURATION_REGISTER 0x2440
-#define ETHERNET0_SDMA_COMMAND_REGISTER 0x2448
-#define ETHERNET0_INTERRUPT_CAUSE_REGISTER 0x2450
-#define ETHERNET0_INTERRUPT_MASK_REGISTER 0x2458
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 0x2480
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1 0x2484
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2 0x2488
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3 0x248c
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 0x24a0
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1 0x24a4
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2 0x24a8
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3 0x24ac
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 0x24e0
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1 0x24e4
-#define ETHERNET0_MIB_COUNTER_BASE 0x2500
-
-/* Ethernet 1 */
-
-#define ETHERNET1_PORT_CONFIGURATION_REGISTER 0x2800
-#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER 0x2808
-#define ETHERNET1_PORT_COMMAND_REGISTER 0x2810
-#define ETHERNET1_PORT_STATUS_REGISTER 0x2818
-#define ETHERNET1_SERIAL_PARAMETRS_REGISTER 0x2820
-#define ETHERNET1_HASH_TABLE_POINTER_REGISTER 0x2828
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2830
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2838
-#define ETHERNET1_SDMA_CONFIGURATION_REGISTER 0x2840
-#define ETHERNET1_SDMA_COMMAND_REGISTER 0x2848
-#define ETHERNET1_INTERRUPT_CAUSE_REGISTER 0x2850
-#define ETHERNET1_INTERRUPT_MASK_REGISTER 0x2858
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0 0x2880
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1 0x2884
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2 0x2888
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3 0x288c
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0 0x28a0
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1 0x28a4
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2 0x28a8
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3 0x28ac
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0 0x28e0
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1 0x28e4
-#define ETHERNET1_MIB_COUNTER_BASE 0x2900
-
-/* Ethernet 2 */
-
-#define ETHERNET2_PORT_CONFIGURATION_REGISTER 0x2c00
-#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER 0x2c08
-#define ETHERNET2_PORT_COMMAND_REGISTER 0x2c10
-#define ETHERNET2_PORT_STATUS_REGISTER 0x2c18
-#define ETHERNET2_SERIAL_PARAMETRS_REGISTER 0x2c20
-#define ETHERNET2_HASH_TABLE_POINTER_REGISTER 0x2c28
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2c30
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2c38
-#define ETHERNET2_SDMA_CONFIGURATION_REGISTER 0x2c40
-#define ETHERNET2_SDMA_COMMAND_REGISTER 0x2c48
-#define ETHERNET2_INTERRUPT_CAUSE_REGISTER 0x2c50
-#define ETHERNET2_INTERRUPT_MASK_REGISTER 0x2c58
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0 0x2c80
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1 0x2c84
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2 0x2c88
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3 0x2c8c
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0 0x2ca0
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1 0x2ca4
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2 0x2ca8
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3 0x2cac
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0 0x2ce0
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1 0x2ce4
-#define ETHERNET2_MIB_COUNTER_BASE 0x2d00
-
-/****************************************/
-/* SDMA Registers */
-/****************************************/
-
-#define SDMA_GROUP_CONFIGURATION_REGISTER 0xb1f0
-#define CHANNEL0_CONFIGURATION_REGISTER 0x4000
-#define CHANNEL0_COMMAND_REGISTER 0x4008
-#define CHANNEL0_RX_CMD_STATUS 0x4800
-#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES 0x4804
-#define CHANNEL0_RX_BUFFER_POINTER 0x4808
-#define CHANNEL0_RX_NEXT_POINTER 0x480c
-#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER 0x4810
-#define CHANNEL0_TX_CMD_STATUS 0x4C00
-#define CHANNEL0_TX_PACKET_SIZE 0x4C04
-#define CHANNEL0_TX_BUFFER_POINTER 0x4C08
-#define CHANNEL0_TX_NEXT_POINTER 0x4C0c
-#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER 0x4c10
-#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER 0x4c14
-#define CHANNEL1_CONFIGURATION_REGISTER 0x5000
-#define CHANNEL1_COMMAND_REGISTER 0x5008
-#define CHANNEL1_RX_CMD_STATUS 0x5800
-#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES 0x5804
-#define CHANNEL1_RX_BUFFER_POINTER 0x5808
-#define CHANNEL1_RX_NEXT_POINTER 0x580c
-#define CHANNEL1_TX_CMD_STATUS 0x5C00
-#define CHANNEL1_TX_PACKET_SIZE 0x5C04
-#define CHANNEL1_TX_BUFFER_POINTER 0x5C08
-#define CHANNEL1_TX_NEXT_POINTER 0x5C0c
-#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER 0x5810
-#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER 0x5c10
-#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER 0x5c14
-#define CHANNEL2_CONFIGURATION_REGISTER 0x6000
-#define CHANNEL2_COMMAND_REGISTER 0x6008
-#define CHANNEL2_RX_CMD_STATUS 0x6800
-#define CHANNEL2_RX_PACKET_AND_BUFFER_SIZES 0x6804
-#define CHANNEL2_RX_BUFFER_POINTER 0x6808
-#define CHANNEL2_RX_NEXT_POINTER 0x680c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
-#define CHANNEL2_TX_CMD_STATUS 0x6C00
-#define CHANNEL2_TX_PACKET_SIZE 0x6C04
-#define CHANNEL2_TX_BUFFER_POINTER 0x6C08
-#define CHANNEL2_TX_NEXT_POINTER 0x6C0c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
-#define CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER 0x6c10
-#define CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER 0x6c14
-
-/* SDMA Interrupt */
-
-#define SDMA_CAUSE 0xb820
-#define SDMA_MASK 0xb8a0
-
-
-/****************************************/
-/* Baude Rate Generators Registers */
-/****************************************/
-
-/* BRG 0 */
-
-#define BRG0_CONFIGURATION_REGISTER 0xb200
-#define BRG0_BAUDE_TUNING_REGISTER 0xb204
-
-/* BRG 1 */
-
-#define BRG1_CONFIGURATION_REGISTER 0xb208
-#define BRG1_BAUDE_TUNING_REGISTER 0xb20c
-
-/* BRG 2 */
-
-#define BRG2_CONFIGURATION_REGISTER 0xb210
-#define BRG2_BAUDE_TUNING_REGISTER 0xb214
-
-/* BRG Interrupts */
-
-#define BRG_CAUSE_REGISTER 0xb834
-#define BRG_MASK_REGISTER 0xb8b4
-
-/* MISC */
-
-#define MAIN_ROUTING_REGISTER 0xb400
-#define RECEIVE_CLOCK_ROUTING_REGISTER 0xb404
-#define TRANSMIT_CLOCK_ROUTING_REGISTER 0xb408
-#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER 0xb40c
-#define WATCHDOG_CONFIGURATION_REGISTER 0xb410
-#define WATCHDOG_VALUE_REGISTER 0xb414
-
-
-/****************************************/
-/* Flex TDM Registers */
-/****************************************/
-
-/* FTDM Port */
-
-#define FLEXTDM_TRANSMIT_READ_POINTER 0xa800
-#define FLEXTDM_RECEIVE_READ_POINTER 0xa804
-#define FLEXTDM_CONFIGURATION_REGISTER 0xa808
-#define FLEXTDM_AUX_CHANNELA_TX_REGISTER 0xa80c
-#define FLEXTDM_AUX_CHANNELA_RX_REGISTER 0xa810
-#define FLEXTDM_AUX_CHANNELB_TX_REGISTER 0xa814
-#define FLEXTDM_AUX_CHANNELB_RX_REGISTER 0xa818
-
-/* FTDM Interrupts */
-
-#define FTDM_CAUSE_REGISTER 0xb830
-#define FTDM_MASK_REGISTER 0xb8b0
-
-
-/****************************************/
-/* GPP Interface Registers */
-/****************************************/
-
-#define GPP_IO_CONTROL 0xf100
-#define GPP_LEVEL_CONTROL 0xf110
-#define GPP_VALUE 0xf104
-#define GPP_INTERRUPT_CAUSE 0xf108
-#define GPP_INTERRUPT_MASK 0xf10c
-
-#define MPP_CONTROL0 0xf000
-#define MPP_CONTROL1 0xf004
-#define MPP_CONTROL2 0xf008
-#define MPP_CONTROL3 0xf00c
-#define DEBUG_PORT_MULTIPLEX 0xf014
-#define SERIAL_PORT_MULTIPLEX 0xf010
-
-/****************************************/
-/* I2C Registers */
-/****************************************/
-
-#define I2C_SLAVE_ADDRESS 0xc000
-#define I2C_EXTENDED_SLAVE_ADDRESS 0xc040
-#define I2C_DATA 0xc004
-#define I2C_CONTROL 0xc008
-#define I2C_STATUS_BAUDE_RATE 0xc00C
-#define I2C_SOFT_RESET 0xc01c
-
-/****************************************/
-/* MPSC Registers */
-/****************************************/
-
-/* MPSC0 */
-
-#define MPSC0_MAIN_CONFIGURATION_LOW 0x8000
-#define MPSC0_MAIN_CONFIGURATION_HIGH 0x8004
-#define MPSC0_PROTOCOL_CONFIGURATION 0x8008
-#define CHANNEL0_REGISTER1 0x800c
-#define CHANNEL0_REGISTER2 0x8010
-#define CHANNEL0_REGISTER3 0x8014
-#define CHANNEL0_REGISTER4 0x8018
-#define CHANNEL0_REGISTER5 0x801c
-#define CHANNEL0_REGISTER6 0x8020
-#define CHANNEL0_REGISTER7 0x8024
-#define CHANNEL0_REGISTER8 0x8028
-#define CHANNEL0_REGISTER9 0x802c
-#define CHANNEL0_REGISTER10 0x8030
-#define CHANNEL0_REGISTER11 0x8034
-
-/* MPSC1 */
-
-#define MPSC1_MAIN_CONFIGURATION_LOW 0x8840
-#define MPSC1_MAIN_CONFIGURATION_HIGH 0x8844
-#define MPSC1_PROTOCOL_CONFIGURATION 0x8848
-#define CHANNEL1_REGISTER1 0x884c
-#define CHANNEL1_REGISTER2 0x8850
-#define CHANNEL1_REGISTER3 0x8854
-#define CHANNEL1_REGISTER4 0x8858
-#define CHANNEL1_REGISTER5 0x885c
-#define CHANNEL1_REGISTER6 0x8860
-#define CHANNEL1_REGISTER7 0x8864
-#define CHANNEL1_REGISTER8 0x8868
-#define CHANNEL1_REGISTER9 0x886c
-#define CHANNEL1_REGISTER10 0x8870
-#define CHANNEL1_REGISTER11 0x8874
-
-/* MPSC2 */
-
-#define MPSC2_MAIN_CONFIGURATION_LOW 0x9040
-#define MPSC2_MAIN_CONFIGURATION_HIGH 0x9044
-#define MPSC2_PROTOCOL_CONFIGURATION 0x9048
-#define CHANNEL2_REGISTER1 0x904c
-#define CHANNEL2_REGISTER2 0x9050
-#define CHANNEL2_REGISTER3 0x9054
-#define CHANNEL2_REGISTER4 0x9058
-#define CHANNEL2_REGISTER5 0x905c
-#define CHANNEL2_REGISTER6 0x9060
-#define CHANNEL2_REGISTER7 0x9064
-#define CHANNEL2_REGISTER8 0x9068
-#define CHANNEL2_REGISTER9 0x906c
-#define CHANNEL2_REGISTER10 0x9070
-#define CHANNEL2_REGISTER11 0x9074
-
-/* MPSCs Interrupts */
-
-#define MPSC0_CAUSE 0xb824
-#define MPSC0_MASK 0xb8a4
-#define MPSC1_CAUSE 0xb828
-#define MPSC1_MASK 0xb8a8
-#define MPSC2_CAUSE 0xb82c
-#define MPSC2_MASK 0xb8ac
-
-#endif /* __INCgt64260rh */
+++ /dev/null
-/* Memory.h - Memory mappings and remapping functions declarations */
-
-/* Copyright - Galileo technology. */
-
-#ifndef __INCmemoryh
-#define __INCmemoryh
-
-/* includes */
-
-#include "core.h"
-
-/* defines */
-
-#define DONT_MODIFY 0xffffffff
-#define PARITY_SUPPORT 0x40000000
-
-#define _8BIT 0x00000000
-#define _16BIT 0x00100000
-#define _32BIT 0x00200000
-#define _64BIT 0x00300000
-
-/* typedefs */
-
- typedef struct deviceParam
-{ /* boundary values */
- unsigned int turnOff; /* 0x0 - 0xf */
- unsigned int acc2First; /* 0x0 - 0x1f */
- unsigned int acc2Next; /* 0x0 - 0x1f */
- unsigned int ale2Wr; /* 0x0 - 0xf */
- unsigned int wrLow; /* 0x0 - 0xf */
- unsigned int wrHigh; /* 0x0 - 0xf */
- unsigned int deviceWidth; /* in Bytes */
-} DEVICE_PARAM;
-
-typedef enum __memBank{BANK0,BANK1,BANK2,BANK3} MEMORY_BANK;
-typedef enum __memDevice{DEVICE0,DEVICE1,DEVICE2,DEVICE3,BOOT_DEVICE} DEVICE;
-
-typedef enum __memoryProtectRegion{MEM_REGION0,MEM_REGION1,MEM_REGION2, \
- MEM_REGION3,MEM_REGION4,MEM_REGION5, \
- MEM_REGION6,MEM_REGION7} \
- MEMORY_PROTECT_REGION;
-typedef enum __memoryAccess{MEM_ACCESS_ALLOWED,MEM_ACCESS_FORBIDEN} \
- MEMORY_ACCESS;
-typedef enum __memoryWrite{MEM_WRITE_ALLOWED,MEM_WRITE_FORBIDEN} \
- MEMORY_ACCESS_WRITE;
-typedef enum __memoryCacheProtect{MEM_CACHE_ALLOWED,MEM_CACHE_FORBIDEN} \
- MEMORY_CACHE_PROTECT;
-typedef enum __memorySnoopType{MEM_NO_SNOOP,MEM_SNOOP_WT,MEM_SNOOP_WB} \
- MEMORY_SNOOP_TYPE;
-typedef enum __memorySnoopRegion{MEM_SNOOP_REGION0,MEM_SNOOP_REGION1, \
- MEM_SNOOP_REGION2,MEM_SNOOP_REGION3} \
- MEMORY_SNOOP_REGION;
-
-/* functions */
-unsigned int memoryGetBankBaseAddress(MEMORY_BANK bank);
-unsigned int memoryGetDeviceBaseAddress(DEVICE device);
-unsigned int memoryGetBankSize(MEMORY_BANK bank);
-unsigned int memoryGetDeviceSize(DEVICE device);
-unsigned int memoryGetDeviceWidth(DEVICE device);
-
-/* when given base Address and size Set new WINDOW for SCS_X. (X = 0,1,2 or 3*/
-bool memoryMapBank(MEMORY_BANK bank, unsigned int bankBase,unsigned int bankLength);
-bool memoryMapDeviceSpace(DEVICE device, unsigned int deviceBase,unsigned int deviceLength);
-
-/* Change the Internal Register Base Address to a new given Address. */
-bool memoryMapInternalRegistersSpace(unsigned int internalRegBase);
-/* returns internal Register Space Base Address. */
-unsigned int memoryGetInternalRegistersSpace(void);
-/* Configurate the protection feature to a given space. */
-bool memorySetProtectRegion(MEMORY_PROTECT_REGION region,
- MEMORY_ACCESS memoryAccess,
- MEMORY_ACCESS_WRITE memoryWrite,
- MEMORY_CACHE_PROTECT cacheProtection,
- unsigned int baseAddress,
- unsigned int regionLength);
-/* Configurate the snoop feature to a given space. */
-bool memorySetRegionSnoopMode(MEMORY_SNOOP_REGION region,
- MEMORY_SNOOP_TYPE snoopType,
- unsigned int baseAddress,
- unsigned int regionLength);
-
-bool memoryRemapAddress(unsigned int remapReg, unsigned int remapValue);
-bool memoryGetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
-bool memorySetDeviceParam(DEVICE_PARAM *deviceParam, DEVICE deviceNum);
-#endif /* __INCmemoryh */
+++ /dev/null
-/* PCI.h - PCI functions header file */
-
-/* Copyright - Galileo technology. */
-
-#ifndef __INCpcih
-#define __INCpcih
-
-/* includes */
-
-#include "core.h"
-#include "memory.h"
-
-/* According to PCI REV 2.1 MAX agents allowed on the bus are -21- */
-#define PCI_MAX_DEVICES 22
-
-
-/* Macros */
-#define SELF 32
-
-/* Defines for the access regions. */
-#define PREFETCH_ENABLE BIT12
-#define PREFETCH_DISABLE NO_BIT
-#define DELAYED_READ_ENABLE BIT13
-/* #define CACHING_ENABLE BIT14 */
-/* aggressive prefetch: PCI slave prefetch two burst in advance*/
-#define AGGRESSIVE_PREFETCH BIT16
-/* read line aggresive prefetch: PCI slave prefetch two burst in advance*/
-#define READ_LINE_AGGRESSIVE_PREFETCH BIT17
-/* read multiple aggresive prefetch: PCI slave prefetch two burst in advance*/
-#define READ_MULTI_AGGRESSIVE_PREFETCH BIT18
-#define MAX_BURST_4 NO_BIT
-#define MAX_BURST_8 BIT20 /* Bits[21:20] = 01 */
-#define MAX_BURST_16 BIT21 /* Bits[21:20] = 10 */
-#define PCI_BYTE_SWAP NO_BIT /* Bits[25:24] = 00 */
-#define PCI_NO_SWAP BIT24 /* Bits[25:24] = 01 */
-#define PCI_BYTE_AND_WORD_SWAP BIT25 /* Bits[25:24] = 10 */
-#define PCI_WORD_SWAP (BIT24 | BIT25) /* Bits[25:24] = 11 */
-#define PCI_ACCESS_PROTECT BIT28
-#define PCI_WRITE_PROTECT BIT29
-
-/* typedefs */
-
-typedef enum __pciAccessRegions{REGION0,REGION1,REGION2,REGION3,REGION4,REGION5,
- REGION6,REGION7} PCI_ACCESS_REGIONS;
-
-typedef enum __pciAgentPrio{LOW_AGENT_PRIO,HI_AGENT_PRIO} PCI_AGENT_PRIO;
-typedef enum __pciAgentPark{PARK_ON_AGENT,DONT_PARK_ON_AGENT} PCI_AGENT_PARK;
-
-typedef enum __pciSnoopType{PCI_NO_SNOOP,PCI_SNOOP_WT,PCI_SNOOP_WB}
- PCI_SNOOP_TYPE;
-typedef enum __pciSnoopRegion{PCI_SNOOP_REGION0,PCI_SNOOP_REGION1,
- PCI_SNOOP_REGION2,PCI_SNOOP_REGION3}
- PCI_SNOOP_REGION;
-
-typedef enum __memPciHost{PCI_HOST0,PCI_HOST1} PCI_HOST;
-typedef enum __memPciRegion{PCI_REGION0,PCI_REGION1,
- PCI_REGION2,PCI_REGION3,
- PCI_IO}
- PCI_REGION;
-
-/* read/write configuration registers on local PCI bus. */
-void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,
- unsigned int pciDevNum, unsigned int data);
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
- unsigned int pciDevNum);
-
-/* read/write configuration registers on another PCI bus. */
-void pciOverBridgeWriteConfigReg(PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum,unsigned int data);
-unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum);
-
-/* Master`s memory space */
-bool pciMapSpace(PCI_HOST host, PCI_REGION region,
- unsigned int remapBase,
- unsigned int deviceBase,
- unsigned int deviceLength);
-unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region);
-unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region);
-
-/* Slave`s memory space */
-void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank,
- unsigned int pci0Dram0Base, unsigned int pci0Dram0Size);
-
-/* PCI region options */
-
-bool pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,
- unsigned int features, unsigned int baseAddress,
- unsigned int regionLength);
-
-void pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region);
-
-/* PCI arbiter */
-
-bool pciArbiterEnable(PCI_HOST host);
-bool pciArbiterDisable(PCI_HOST host);
-bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
- PCI_AGENT_PARK externalAgent0,
- PCI_AGENT_PARK externalAgent1,
- PCI_AGENT_PARK externalAgent2,
- PCI_AGENT_PARK externalAgent3,
- PCI_AGENT_PARK externalAgent4,
- PCI_AGENT_PARK externalAgent5);
-bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,
- PCI_SNOOP_TYPE snoopType,
- unsigned int baseAddress,
- unsigned int regionLength);
-
-#endif /* __INCpcih */
projects / u-boot.git / commitdiff