]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
add SMSC LAN9x1x Network driver
authorSascha Hauer <s.hauer@pengutronix.de>
Sun, 30 Mar 2008 10:32:21 +0000 (11:32 +0100)
committerPeter Pearse <peter.pearse@arm.com>
Sun, 30 Mar 2008 10:32:21 +0000 (11:32 +0100)
This patch adds a driver for the following smsc network controllers:
LAN9115
LAN9116
LAN9117
LAN9215
LAN9216
LAN9217

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
drivers/net/Makefile
drivers/net/smc911x.c [new file with mode: 0644]

index 320dc3ebac716adb4bfd9b699f9d19d6972f3710..948239885c26e61b28826b2bedf65b73e600f0a5 100644 (file)
@@ -54,6 +54,7 @@ COBJS-y += rtl8139.o
 COBJS-y += rtl8169.o
 COBJS-y += s3c4510b_eth.o
 COBJS-y += smc91111.o
+COBJS-y += smc911x.o
 COBJS-y += tigon3.o
 COBJS-y += tsec.o
 COBJS-y += tsi108_eth.o
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
new file mode 100644 (file)
index 0000000..2fd5777
--- /dev/null
@@ -0,0 +1,680 @@
+/*
+ * SMSC LAN9[12]1[567] Network driver
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_SMC911X
+
+#include <command.h>
+#include <net.h>
+#include <miiphy.h>
+
+#define mdelay(n)       udelay((n)*1000)
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO            __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
+
+#define TX_DATA_FIFO            __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define        TX_CMD_A_INT_ON_COMP                    (0x80000000)
+#define        TX_CMD_A_INT_BUF_END_ALGN               (0x03000000)
+#define        TX_CMD_A_INT_4_BYTE_ALGN                (0x00000000)
+#define        TX_CMD_A_INT_16_BYTE_ALGN               (0x01000000)
+#define        TX_CMD_A_INT_32_BYTE_ALGN               (0x02000000)
+#define        TX_CMD_A_INT_DATA_OFFSET                (0x001F0000)
+#define        TX_CMD_A_INT_FIRST_SEG                  (0x00002000)
+#define        TX_CMD_A_INT_LAST_SEG                   (0x00001000)
+#define        TX_CMD_A_BUF_SIZE                       (0x000007FF)
+#define        TX_CMD_B_PKT_TAG                        (0xFFFF0000)
+#define        TX_CMD_B_ADD_CRC_DISABLE                (0x00002000)
+#define        TX_CMD_B_DISABLE_PADDING                (0x00001000)
+#define        TX_CMD_B_PKT_BYTE_LENGTH                (0x000007FF)
+
+#define RX_STATUS_FIFO         __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define        RX_STS_PKT_LEN                          (0x3FFF0000)
+#define        RX_STS_ES                               (0x00008000)
+#define        RX_STS_BCST                             (0x00002000)
+#define        RX_STS_LEN_ERR                          (0x00001000)
+#define        RX_STS_RUNT_ERR                         (0x00000800)
+#define        RX_STS_MCAST                            (0x00000400)
+#define        RX_STS_TOO_LONG                         (0x00000080)
+#define        RX_STS_COLL                             (0x00000040)
+#define        RX_STS_ETH_TYPE                         (0x00000020)
+#define        RX_STS_WDOG_TMT                         (0x00000010)
+#define        RX_STS_MII_ERR                          (0x00000008)
+#define        RX_STS_DRIBBLING                        (0x00000004)
+#define        RX_STS_CRC_ERR                          (0x00000002)
+#define RX_STATUS_FIFO_PEEK    __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define TX_STATUS_FIFO         __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define        TX_STS_TAG                              (0xFFFF0000)
+#define        TX_STS_ES                               (0x00008000)
+#define        TX_STS_LOC                              (0x00000800)
+#define        TX_STS_NO_CARR                          (0x00000400)
+#define        TX_STS_LATE_COLL                        (0x00000200)
+#define        TX_STS_MANY_COLL                        (0x00000100)
+#define        TX_STS_COLL_CNT                         (0x00000078)
+#define        TX_STS_MANY_DEFER                       (0x00000004)
+#define        TX_STS_UNDERRUN                         (0x00000002)
+#define        TX_STS_DEFERRED                         (0x00000001)
+#define TX_STATUS_FIFO_PEEK    __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
+#define ID_REV                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define        ID_REV_CHIP_ID                          (0xFFFF0000)  /* RO */
+#define        ID_REV_REV_ID                           (0x0000FFFF)  /* RO */
+
+#define INT_CFG                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define        INT_CFG_INT_DEAS                        (0xFF000000)  /* R/W */
+#define        INT_CFG_INT_DEAS_CLR                    (0x00004000)
+#define        INT_CFG_INT_DEAS_STS                    (0x00002000)
+#define        INT_CFG_IRQ_INT                         (0x00001000)  /* RO */
+#define        INT_CFG_IRQ_EN                          (0x00000100)  /* R/W */
+#define        INT_CFG_IRQ_POL                         (0x00000010)  /* R/W */
+                                               /* Not Affected by SW Reset */
+#define        INT_CFG_IRQ_TYPE                        (0x00000001)  /* R/W */
+                                               /* Not Affected by SW Reset */
+
+#define INT_STS                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define        INT_STS_SW_INT                          (0x80000000)  /* R/WC */
+#define        INT_STS_TXSTOP_INT                      (0x02000000)  /* R/WC */
+#define        INT_STS_RXSTOP_INT                      (0x01000000)  /* R/WC */
+#define        INT_STS_RXDFH_INT                       (0x00800000)  /* R/WC */
+#define        INT_STS_RXDF_INT                        (0x00400000)  /* R/WC */
+#define        INT_STS_TX_IOC                          (0x00200000)  /* R/WC */
+#define        INT_STS_RXD_INT                         (0x00100000)  /* R/WC */
+#define        INT_STS_GPT_INT                         (0x00080000)  /* R/WC */
+#define        INT_STS_PHY_INT                         (0x00040000)  /* RO */
+#define        INT_STS_PME_INT                         (0x00020000)  /* R/WC */
+#define        INT_STS_TXSO                            (0x00010000)  /* R/WC */
+#define        INT_STS_RWT                             (0x00008000)  /* R/WC */
+#define        INT_STS_RXE                             (0x00004000)  /* R/WC */
+#define        INT_STS_TXE                             (0x00002000)  /* R/WC */
+/*#define      INT_STS_ERX             (0x00001000)*/  /* R/WC */
+#define        INT_STS_TDFU                            (0x00000800)  /* R/WC */
+#define        INT_STS_TDFO                            (0x00000400)  /* R/WC */
+#define        INT_STS_TDFA                            (0x00000200)  /* R/WC */
+#define        INT_STS_TSFF                            (0x00000100)  /* R/WC */
+#define        INT_STS_TSFL                            (0x00000080)  /* R/WC */
+/*#define      INT_STS_RXDF            (0x00000040)*/  /* R/WC */
+#define        INT_STS_RDFO                            (0x00000040)  /* R/WC */
+#define        INT_STS_RDFL                            (0x00000020)  /* R/WC */
+#define        INT_STS_RSFF                            (0x00000010)  /* R/WC */
+#define        INT_STS_RSFL                            (0x00000008)  /* R/WC */
+#define        INT_STS_GPIO2_INT                       (0x00000004)  /* R/WC */
+#define        INT_STS_GPIO1_INT                       (0x00000002)  /* R/WC */
+#define        INT_STS_GPIO0_INT                       (0x00000001)  /* R/WC */
+#define INT_EN                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define        INT_EN_SW_INT_EN                        (0x80000000)  /* R/W */
+#define        INT_EN_TXSTOP_INT_EN                    (0x02000000)  /* R/W */
+#define        INT_EN_RXSTOP_INT_EN                    (0x01000000)  /* R/W */
+#define        INT_EN_RXDFH_INT_EN                     (0x00800000)  /* R/W */
+/*#define      INT_EN_RXDF_INT_EN              (0x00400000)*/  /* R/W */
+#define        INT_EN_TIOC_INT_EN                      (0x00200000)  /* R/W */
+#define        INT_EN_RXD_INT_EN                       (0x00100000)  /* R/W */
+#define        INT_EN_GPT_INT_EN                       (0x00080000)  /* R/W */
+#define        INT_EN_PHY_INT_EN                       (0x00040000)  /* R/W */
+#define        INT_EN_PME_INT_EN                       (0x00020000)  /* R/W */
+#define        INT_EN_TXSO_EN                          (0x00010000)  /* R/W */
+#define        INT_EN_RWT_EN                           (0x00008000)  /* R/W */
+#define        INT_EN_RXE_EN                           (0x00004000)  /* R/W */
+#define        INT_EN_TXE_EN                           (0x00002000)  /* R/W */
+/*#define      INT_EN_ERX_EN                   (0x00001000)*/  /* R/W */
+#define        INT_EN_TDFU_EN                          (0x00000800)  /* R/W */
+#define        INT_EN_TDFO_EN                          (0x00000400)  /* R/W */
+#define        INT_EN_TDFA_EN                          (0x00000200)  /* R/W */
+#define        INT_EN_TSFF_EN                          (0x00000100)  /* R/W */
+#define        INT_EN_TSFL_EN                          (0x00000080)  /* R/W */
+/*#define      INT_EN_RXDF_EN                  (0x00000040)*/  /* R/W */
+#define        INT_EN_RDFO_EN                          (0x00000040)  /* R/W */
+#define        INT_EN_RDFL_EN                          (0x00000020)  /* R/W */
+#define        INT_EN_RSFF_EN                          (0x00000010)  /* R/W */
+#define        INT_EN_RSFL_EN                          (0x00000008)  /* R/W */
+#define        INT_EN_GPIO2_INT                        (0x00000004)  /* R/W */
+#define        INT_EN_GPIO1_INT                        (0x00000002)  /* R/W */
+#define        INT_EN_GPIO0_INT                        (0x00000001)  /* R/W */
+
+#define BYTE_TEST              __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
+#define FIFO_INT               __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define        FIFO_INT_TX_AVAIL_LEVEL                 (0xFF000000)  /* R/W */
+#define        FIFO_INT_TX_STS_LEVEL                   (0x00FF0000)  /* R/W */
+#define        FIFO_INT_RX_AVAIL_LEVEL                 (0x0000FF00)  /* R/W */
+#define        FIFO_INT_RX_STS_LEVEL                   (0x000000FF)  /* R/W */
+
+#define RX_CFG                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define        RX_CFG_RX_END_ALGN                      (0xC0000000)  /* R/W */
+#define                RX_CFG_RX_END_ALGN4             (0x00000000)  /* R/W */
+#define                RX_CFG_RX_END_ALGN16            (0x40000000)  /* R/W */
+#define                RX_CFG_RX_END_ALGN32            (0x80000000)  /* R/W */
+#define        RX_CFG_RX_DMA_CNT                       (0x0FFF0000)  /* R/W */
+#define        RX_CFG_RX_DUMP                          (0x00008000)  /* R/W */
+#define        RX_CFG_RXDOFF                           (0x00001F00)  /* R/W */
+/*#define      RX_CFG_RXBAD                    (0x00000001)*/  /* R/W */
+
+#define TX_CFG                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
+/*#define      TX_CFG_TX_DMA_LVL               (0xE0000000)*/   /* R/W */
+/*#define      TX_CFG_TX_DMA_CNT               (0x0FFF0000)*/   /* R/W */
+                                                       /* Self Clearing */
+#define        TX_CFG_TXS_DUMP                         (0x00008000)
+                                                       /* Self Clearing */
+#define        TX_CFG_TXD_DUMP                         (0x00004000)
+                                                       /* Self Clearing */
+#define        TX_CFG_TXSAO                            (0x00000004)  /* R/W */
+#define        TX_CFG_TX_ON                            (0x00000002)  /* R/W */
+#define        TX_CFG_STOP_TX                          (0x00000001)
+                                                       /* Self Clearing */
+
+#define HW_CFG                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define        HW_CFG_TTM                              (0x00200000)  /* R/W */
+#define        HW_CFG_SF                               (0x00100000)  /* R/W */
+#define        HW_CFG_TX_FIF_SZ                        (0x000F0000)  /* R/W */
+#define        HW_CFG_TR                               (0x00003000)  /* R/W */
+#define        HW_CFG_PHY_CLK_SEL                      (0x00000060)  /* R/W */
+#define        HW_CFG_PHY_CLK_SEL_INT_PHY              (0x00000000) /* R/W */
+#define        HW_CFG_PHY_CLK_SEL_EXT_PHY              (0x00000020) /* R/W */
+#define        HW_CFG_PHY_CLK_SEL_CLK_DIS              (0x00000040) /* R/W */
+#define        HW_CFG_SMI_SEL                          (0x00000010)  /* R/W */
+#define        HW_CFG_EXT_PHY_DET                      (0x00000008)  /* RO */
+#define        HW_CFG_EXT_PHY_EN                       (0x00000004)  /* R/W */
+#define        HW_CFG_32_16_BIT_MODE                   (0x00000004)  /* RO */
+#define        HW_CFG_SRST_TO                          (0x00000002)  /* RO */
+#define        HW_CFG_SRST                             (0x00000001)
+                                                       /* Self Clearing */
+
+#define RX_DP_CTRL             __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define        RX_DP_CTRL_RX_FFWD                      (0x80000000)  /* R/W */
+#define        RX_DP_CTRL_FFWD_BUSY                    (0x80000000)  /* RO */
+
+#define RX_FIFO_INF            __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define         RX_FIFO_INF_RXSUSED                    (0x00FF0000)  /* RO */
+#define         RX_FIFO_INF_RXDUSED                    (0x0000FFFF)  /* RO */
+
+#define TX_FIFO_INF            __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define        TX_FIFO_INF_TSUSED                      (0x00FF0000)  /* RO */
+#define        TX_FIFO_INF_TDFREE                      (0x0000FFFF)  /* RO */
+
+#define PMT_CTRL               __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define        PMT_CTRL_PM_MODE                        (0x00003000)
+                                                       /* Self Clearing */
+#define        PMT_CTRL_PHY_RST                        (0x00000400)
+                                                       /* Self Clearing */
+#define        PMT_CTRL_WOL_EN                         (0x00000200)  /* R/W */
+#define        PMT_CTRL_ED_EN                          (0x00000100)  /* R/W */
+#define        PMT_CTRL_PME_TYPE                       (0x00000040)  /* R/W */
+                                               /* Not Affected by SW Reset */
+#define        PMT_CTRL_WUPS                           (0x00000030)  /* R/WC */
+#define        PMT_CTRL_WUPS_NOWAKE                    (0x00000000)  /* R/WC */
+#define        PMT_CTRL_WUPS_ED                        (0x00000010)  /* R/WC */
+#define        PMT_CTRL_WUPS_WOL                       (0x00000020)  /* R/WC */
+#define        PMT_CTRL_WUPS_MULTI                     (0x00000030)  /* R/WC */
+#define        PMT_CTRL_PME_IND                        (0x00000008)  /* R/W */
+#define        PMT_CTRL_PME_POL                        (0x00000004)  /* R/W */
+#define        PMT_CTRL_PME_EN                         (0x00000002)  /* R/W */
+                                               /* Not Affected by SW Reset */
+#define        PMT_CTRL_READY                          (0x00000001)  /* RO */
+
+#define GPIO_CFG               __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define        GPIO_CFG_LED3_EN                        (0x40000000)  /* R/W */
+#define        GPIO_CFG_LED2_EN                        (0x20000000)  /* R/W */
+#define        GPIO_CFG_LED1_EN                        (0x10000000)  /* R/W */
+#define        GPIO_CFG_GPIO2_INT_POL                  (0x04000000)  /* R/W */
+#define        GPIO_CFG_GPIO1_INT_POL                  (0x02000000)  /* R/W */
+#define        GPIO_CFG_GPIO0_INT_POL                  (0x01000000)  /* R/W */
+#define        GPIO_CFG_EEPR_EN                        (0x00700000)  /* R/W */
+#define        GPIO_CFG_GPIOBUF2                       (0x00040000)  /* R/W */
+#define        GPIO_CFG_GPIOBUF1                       (0x00020000)  /* R/W */
+#define        GPIO_CFG_GPIOBUF0                       (0x00010000)  /* R/W */
+#define        GPIO_CFG_GPIODIR2                       (0x00000400)  /* R/W */
+#define        GPIO_CFG_GPIODIR1                       (0x00000200)  /* R/W */
+#define        GPIO_CFG_GPIODIR0                       (0x00000100)  /* R/W */
+#define        GPIO_CFG_GPIOD4                         (0x00000010)  /* R/W */
+#define        GPIO_CFG_GPIOD3                         (0x00000008)  /* R/W */
+#define        GPIO_CFG_GPIOD2                         (0x00000004)  /* R/W */
+#define        GPIO_CFG_GPIOD1                         (0x00000002)  /* R/W */
+#define        GPIO_CFG_GPIOD0                         (0x00000001)  /* R/W */
+
+#define GPT_CFG                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define        GPT_CFG_TIMER_EN                        (0x20000000)  /* R/W */
+#define        GPT_CFG_GPT_LOAD                        (0x0000FFFF)  /* R/W */
+
+#define GPT_CNT                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define        GPT_CNT_GPT_CNT                         (0x0000FFFF)  /* RO */
+
+#define ENDIAN                 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
+#define FREE_RUN               __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
+#define RX_DROP                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
+#define MAC_CSR_CMD            __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define         MAC_CSR_CMD_CSR_BUSY                   (0x80000000)
+                                                       /* Self Clearing */
+#define         MAC_CSR_CMD_R_NOT_W                    (0x40000000)  /* R/W */
+#define         MAC_CSR_CMD_CSR_ADDR                   (0x000000FF)  /* R/W */
+
+#define MAC_CSR_DATA           __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
+#define AFC_CFG                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define                AFC_CFG_AFC_HI                  (0x00FF0000)  /* R/W */
+#define                AFC_CFG_AFC_LO                  (0x0000FF00)  /* R/W */
+#define                AFC_CFG_BACK_DUR                (0x000000F0)  /* R/W */
+#define                AFC_CFG_FCMULT                  (0x00000008)  /* R/W */
+#define                AFC_CFG_FCBRD                   (0x00000004)  /* R/W */
+#define                AFC_CFG_FCADD                   (0x00000002)  /* R/W */
+#define                AFC_CFG_FCANY                   (0x00000001)  /* R/W */
+
+#define E2P_CMD                        __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define                E2P_CMD_EPC_BUSY                (0x80000000)
+                                                       /* Self Clearing */
+#define                E2P_CMD_EPC_CMD                 (0x70000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_READ            (0x00000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_EWDS            (0x10000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_EWEN            (0x20000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_WRITE           (0x30000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_WRAL            (0x40000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_ERASE           (0x50000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_ERAL            (0x60000000)  /* R/W */
+#define                E2P_CMD_EPC_CMD_RELOAD          (0x70000000)  /* R/W */
+#define                E2P_CMD_EPC_TIMEOUT             (0x00000200)  /* RO */
+#define                E2P_CMD_MAC_ADDR_LOADED         (0x00000100)  /* RO */
+#define                E2P_CMD_EPC_ADDR                (0x000000FF)  /* R/W */
+
+#define E2P_DATA               __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define        E2P_DATA_EEPROM_DATA                    (0x000000FF)  /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/* MAC Control and Status registers */
+#define MAC_CR                 (0x01)  /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL                   (0x80000000)
+/* TODO: delete this bit? It is not described in the data sheet. */
+#define MAC_CR_HBDIS                   (0x10000000)
+#define MAC_CR_RCVOWN                  (0x00800000)
+#define MAC_CR_LOOPBK                  (0x00200000)
+#define MAC_CR_FDPX                    (0x00100000)
+#define MAC_CR_MCPAS                   (0x00080000)
+#define MAC_CR_PRMS                    (0x00040000)
+#define MAC_CR_INVFILT                 (0x00020000)
+#define MAC_CR_PASSBAD                 (0x00010000)
+#define MAC_CR_HFILT                   (0x00008000)
+#define MAC_CR_HPFILT                  (0x00002000)
+#define MAC_CR_LCOLL                   (0x00001000)
+#define MAC_CR_BCAST                   (0x00000800)
+#define MAC_CR_DISRTY                  (0x00000400)
+#define MAC_CR_PADSTR                  (0x00000100)
+#define MAC_CR_BOLMT_MASK              (0x000000C0)
+#define MAC_CR_DFCHK                   (0x00000020)
+#define MAC_CR_TXEN                    (0x00000008)
+#define MAC_CR_RXEN                    (0x00000004)
+
+#define ADDRH                  (0x02)    /* R/W mask 0x0000FFFFUL */
+#define ADDRL                  (0x03)    /* R/W mask 0xFFFFFFFFUL */
+#define HASHH                  (0x04)    /* R/W */
+#define HASHL                  (0x05)    /* R/W */
+
+#define MII_ACC                        (0x06)    /* R/W */
+#define MII_ACC_PHY_ADDR               (0x0000F800)
+#define MII_ACC_MIIRINDA               (0x000007C0)
+#define MII_ACC_MII_WRITE              (0x00000002)
+#define MII_ACC_MII_BUSY               (0x00000001)
+
+#define MII_DATA               (0x07)    /* R/W mask 0x0000FFFFUL */
+
+#define FLOW                   (0x08)    /* R/W */
+#define FLOW_FCPT                      (0xFFFF0000)
+#define FLOW_FCPASS                    (0x00000004)
+#define FLOW_FCEN                      (0x00000002)
+#define FLOW_FCBSY                     (0x00000001)
+
+#define VLAN1                  (0x09)    /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1                     (0x0000ffff)
+
+#define VLAN2                  (0x0A)    /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2                     (0x0000ffff)
+
+#define WUFF                   (0x0B)    /* WO */
+
+#define WUCSR                  (0x0C)    /* R/W */
+#define WUCSR_GUE                      (0x00000200)
+#define WUCSR_WUFR                     (0x00000040)
+#define WUCSR_MPR                      (0x00000020)
+#define WUCSR_WAKE_EN                  (0x00000004)
+#define WUCSR_MPEN                     (0x00000002)
+
+/* Chip ID values */
+#define CHIP_9115      0x115
+#define CHIP_9116      0x116
+#define CHIP_9117      0x117
+#define CHIP_9118      0x118
+#define CHIP_9215      0x115a
+#define CHIP_9216      0x116a
+#define CHIP_9217      0x117a
+#define CHIP_9218      0x118a
+
+struct chip_id {
+       u16 id;
+       char *name;
+};
+
+static const struct chip_id chip_ids[] =  {
+       { CHIP_9115, "LAN9115" },
+       { CHIP_9116, "LAN9116" },
+       { CHIP_9117, "LAN9117" },
+       { CHIP_9118, "LAN9118" },
+       { CHIP_9215, "LAN9215" },
+       { CHIP_9216, "LAN9216" },
+       { CHIP_9217, "LAN9217" },
+       { CHIP_9218, "LAN9218" },
+       { 0, NULL },
+};
+
+#define DRIVERNAME "smc911x"
+
+u32 smc911x_get_mac_csr(u8 reg)
+{
+       while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+       MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
+       while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+
+       return MAC_CSR_DATA;
+}
+
+void smc911x_set_mac_csr(u8 reg, u32 data)
+{
+       while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+       MAC_CSR_DATA = data;
+       MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
+       while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); }
+
+static int smx911x_handle_mac_address(bd_t *bd)
+{
+       unsigned long addrh, addrl;
+       unsigned char *m = bd->bi_enetaddr;
+
+       /* if the environment has a valid mac address then use it */
+       if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
+               addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
+               addrh = m[4] | m[5] << 8;
+               smc911x_set_mac_csr(ADDRH, addrh);
+               smc911x_set_mac_csr(ADDRL, addrl);
+       } else {
+               /* if not, try to get one from the eeprom */
+               addrh = smc911x_get_mac_csr(ADDRH);
+               addrl = smc911x_get_mac_csr(ADDRL);
+
+               m[0] = (addrl) & 0xff;
+               m[1] = (addrl >>  8) & 0xff;
+               m[2] = (addrl >> 16) & 0xff;
+               m[3] = (addrl >> 24) & 0xff;
+               m[4] = (addrh) & 0xff;
+               m[5] = (addrh >>  8) & 0xff;
+
+               /* we get 0xff when there is no eeprom connected */
+               if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
+                       printf(DRIVERNAME ": no valid mac address "
+                               "in environment "
+                               "and no eeprom found\n");
+                       return -1;
+               }
+       }
+
+       printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+               m[0], m[1], m[2], m[3], m[4], m[5]);
+
+       return 0;
+}
+
+static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+{
+       while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+       smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+
+       while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+       *val = smc911x_get_mac_csr(MII_DATA);
+
+       return 0;
+}
+
+static int smc911x_miiphy_write(u8 phy, u8 reg, u16  val)
+{
+       while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+       smc911x_set_mac_csr(MII_DATA, val);
+       smc911x_set_mac_csr(MII_ACC,
+               phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
+
+       while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+       return 0;
+}
+
+static int smc911x_phy_reset(void)
+{
+       u32 reg;
+
+       reg = PMT_CTRL;
+       reg &= ~0xfffff030;
+       reg |= PMT_CTRL_PHY_RST;
+       PMT_CTRL = reg;
+
+       mdelay(100);
+
+       return 0;
+}
+
+static void smc911x_phy_configure(void)
+{
+       int timeout;
+       u16 status;
+
+       smc911x_phy_reset();
+
+       smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+       mdelay(1);
+       smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
+       smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+       timeout = 5000;
+       do {
+               mdelay(1);
+               if ((timeout--) == 0)
+                       goto err_out;
+
+               if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+                       goto err_out;
+       } while (!(status & PHY_BMSR_LS));
+
+       printf(DRIVERNAME ": phy initialized\n");
+
+       return;
+
+err_out:
+       printf(DRIVERNAME ": autonegotiation timed out\n"); }
+
+static void smc911x_reset(void)
+{
+       int timeout;
+
+       /* Take out of PM setting first */
+       if (PMT_CTRL & PMT_CTRL_READY) {
+               /* Write to the bytetest will take out of powerdown */
+               BYTE_TEST = 0x0;
+
+               timeout = 10;
+
+               while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
+                       udelay(10);
+               if (!timeout) {
+                       printf(DRIVERNAME
+                               ": timeout waiting for PM restore\n");
+                       return;
+               }
+       }
+
+       /* Disable interrupts */
+       INT_EN = 0;
+
+       HW_CFG = HW_CFG_SRST;
+
+       timeout = 1000;
+       while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
+               udelay(10);
+
+       if (!timeout) {
+               printf(DRIVERNAME ": reset timeout\n");
+               return;
+       }
+
+       /* Reset the FIFO level and flow control settings */
+       smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
+       AFC_CFG = 0x0050287F;
+
+       /* Set to LED outputs */
+       GPIO_CFG = 0x70070000;
+}
+
+static void smc911x_enable(void)
+{
+       /* Enable TX */
+       HW_CFG = 8 << 16 | HW_CFG_SF;
+
+       GPT_CFG = GPT_CFG_TIMER_EN | 10000;
+
+       TX_CFG = TX_CFG_TX_ON;
+
+       /* no padding to start of packets */
+       RX_CFG = 0;
+
+       smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+
+}
+
+int eth_init(bd_t *bd)
+{
+       unsigned long val, i;
+
+       printf(DRIVERNAME ": initializing\n");
+
+       val = BYTE_TEST;
+       if (val != 0x87654321) {
+               printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
+               goto err_out;
+       }
+
+       val = ID_REV >> 16;
+       for (i = 0; chip_ids[i].id != 0; i++) {
+               if (chip_ids[i].id == val)
+                       break;
+       }
+       if (!chip_ids[i].id) {
+               printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
+               goto err_out;
+       }
+
+       printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+
+       smc911x_reset();
+
+       /* Configure the PHY, initialize the link state */
+       smc911x_phy_configure();
+
+       if (smx911x_handle_mac_address(bd))
+               goto err_out;
+
+       /* Turn on Tx + Rx */
+       smc911x_enable();
+
+       return 0;
+
+err_out:
+       return -1;
+}
+
+int eth_send(volatile void *packet, int length)
+{
+       u32 *data = (u32 *)packet;
+       u32 tmplen;
+       u32 status;
+
+       TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
+       TX_DATA_FIFO = length;
+
+       tmplen = (length + 3) / 4;
+
+       while (tmplen--)
+               TX_DATA_FIFO = *data++;
+
+       /* wait for transmission */
+       while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
+
+       /* get status. Ignore 'no carrier' error, it has no meaning for
+        * full duplex operation
+        */
+       status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
+               TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+
+       if (!status)
+               return 0;
+
+       printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
+               status & TX_STS_LOC ? "TX_STS_LOC " : "",
+               status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
+               status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
+               status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
+               status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
+
+       return -1;
+}
+
+void eth_halt(void)
+{
+       smc911x_reset();
+}
+
+int eth_rx(void)
+{
+       u32 *data = (u32 *)NetRxPackets[0];
+       u32 pktlen, tmplen;
+       u32 status;
+
+       if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
+               status = RX_STATUS_FIFO;
+               pktlen = (status & RX_STS_PKT_LEN) >> 16;
+
+               RX_CFG = 0;
+
+               tmplen = (pktlen + 2 + 3) / 4;
+               while (tmplen--)
+                       *data++ = RX_DATA_FIFO;
+
+               if (status & RX_STS_ES)
+                       printf(DRIVERNAME
+                               ": dropped bad packet. Status: 0x%08x\n",
+                               status);
+               else
+                       NetReceive(NetRxPackets[0], pktlen);
+       }
+
+       return 0;
+}
+
+#endif                         /* CONFIG_DRIVER_SMC911X */