Convert pico-imx7d to SPL support.
There are two variants of pico-imx7d SOMs:
- One with 512MB of RAM
- One with 1GB of RAM
The 512MB module contains two Hynix H5TC2G63GFR-PBA.
The 1GB module contains two Hynix H5TC4G63GFR-PBA.
The RAM size is determined in runtime by reading GPIO1_12.
While at it, also add USB Serial Download mode support as it
is very helpful for loading SPL and u-boot.img via imx_usb_loader.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
select MX7D
select DM
select DM_THERMAL
+ select SUPPORT_SPL
config TARGET_WARP7
bool "warp7"
# SPDX-License-Identifier: GPL-2.0+
# (C) Copyright 2017 NXP Semiconductors
-obj-y := pico-imx7d.o
+obj-y := pico-imx7d.o spl.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2017 Freescale Semiconductor, Inc.
- *
- * Refer docs/README.imxmage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-#define __ASSEMBLY__
-#include <config.h>
-
-/* image version */
-
-IMAGE_VERSION 2
-
-BOOT_FROM sd
-
-/* Secure boot support */
-#ifdef CONFIG_SECURE_BOOT
-CSF CONFIG_CSF_SIZE
-#endif
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-
-DATA 4 0x30340004 0x4F400005
-/* Clear then set bit30 to ensure exit from DDR retention */
-DATA 4 0x30360388 0x40000000
-DATA 4 0x30360384 0x40000000
-
-DATA 4 0x30391000 0x00000002
-DATA 4 0x307a0000 0x01040001
-DATA 4 0x307a01a0 0x80400003
-DATA 4 0x307a01a4 0x00100020
-DATA 4 0x307a01a8 0x80100004
-DATA 4 0x307a0064 0x00400046
-DATA 4 0x307a0490 0x00000001
-DATA 4 0x307a00d0 0x00020083
-DATA 4 0x307a00d4 0x00690000
-DATA 4 0x307a00dc 0x09300004
-DATA 4 0x307a00e0 0x04080000
-DATA 4 0x307a00e4 0x00100004
-DATA 4 0x307a00f4 0x0000033f
-DATA 4 0x307a0100 0x09081109
-DATA 4 0x307a0104 0x0007020d
-DATA 4 0x307a0108 0x03040407
-DATA 4 0x307a010c 0x00002006
-DATA 4 0x307a0110 0x04020205
-DATA 4 0x307a0114 0x03030202
-DATA 4 0x307a0120 0x00000803
-DATA 4 0x307a0180 0x00800020
-DATA 4 0x307a0184 0x02000100
-DATA 4 0x307a0190 0x02098204
-DATA 4 0x307a0194 0x00030303
-DATA 4 0x307a0200 0x00000016
-DATA 4 0x307a0204 0x00080808
-DATA 4 0x307a0210 0x00000f0f
-DATA 4 0x307a0214 0x07070707
-DATA 4 0x307a0218 0x0f070707
-DATA 4 0x307a0240 0x06000604
-DATA 4 0x307a0244 0x00000001
-DATA 4 0x30391000 0x00000000
-DATA 4 0x30790000 0x17420f40
-DATA 4 0x30790004 0x10210100
-DATA 4 0x30790010 0x00060807
-DATA 4 0x307900b0 0x1010007e
-DATA 4 0x3079009c 0x00000b24
-DATA 4 0x30790020 0x08080808
-DATA 4 0x30790030 0x08080808
-DATA 4 0x30790050 0x01000010
-DATA 4 0x30790050 0x00000010
-
-DATA 4 0x307900c0 0x0e407304
-DATA 4 0x307900c0 0x0e447304
-DATA 4 0x307900c0 0x0e447306
-
-CHECK_BITS_SET 4 0x307900c4 0x1
-
-DATA 4 0x307900c0 0x0e407304
-
-DATA 4 0x30384130 0x00000000
-DATA 4 0x30340020 0x00000178
-DATA 4 0x30384130 0x00000002
-DATA 4 0x30790018 0x0000000f
-
-CHECK_BITS_SET 4 0x307a0004 0x1
int dram_init(void)
{
- gd->ram_size = PHYS_SDRAM_SIZE;
+ gd->ram_size = imx_ddr_size();
return 0;
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Technexion Ltd.
+ *
+ * Author: Richard Hu <richard.hu@technexion.com>
+ */
+
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-mx7/mx7-ddr.h>
+#include <asm/gpio.h>
+#include <spl.h>
+
+#if defined(CONFIG_SPL_BUILD)
+static struct ddrc ddrc_regs_val = {
+ .mstr = 0x01040001,
+ .rfshtmg = 0x00400046,
+ .init1 = 0x00690000,
+ .init0 = 0x00020083,
+ .init3 = 0x09300004,
+ .init4 = 0x04080000,
+ .init5 = 0x00100004,
+ .rankctl = 0x0000033F,
+ .dramtmg0 = 0x09081109,
+ .dramtmg1 = 0x0007020d,
+ .dramtmg2 = 0x03040407,
+ .dramtmg3 = 0x00002006,
+ .dramtmg4 = 0x04020205,
+ .dramtmg5 = 0x03030202,
+ .dramtmg8 = 0x00000803,
+ .zqctl0 = 0x00800020,
+ .dfitmg0 = 0x02098204,
+ .dfitmg1 = 0x00030303,
+ .dfiupd0 = 0x80400003,
+ .dfiupd1 = 0x00100020,
+ .dfiupd2 = 0x80100004,
+ .addrmap4 = 0x00000F0F,
+ .odtcfg = 0x06000604,
+ .odtmap = 0x00000001,
+ .rfshtmg = 0x00400046,
+ .dramtmg0 = 0x09081109,
+ .addrmap0 = 0x0000001f,
+ .addrmap1 = 0x00080808,
+ .addrmap4 = 0x00000f0f,
+ .addrmap5 = 0x07070707,
+ .addrmap6 = 0x0f0f0707,
+};
+
+static struct ddrc_mp ddrc_mp_val = {
+ .pctrl_0 = 0x00000001,
+};
+
+static struct ddr_phy ddr_phy_regs_val = {
+ .phy_con0 = 0x17420f40,
+ .phy_con1 = 0x10210100,
+ .phy_con4 = 0x00060807,
+ .mdll_con0 = 0x1010007e,
+ .drvds_con0 = 0x00000d6e,
+ .cmd_sdll_con0 = 0x00000010,
+ .offset_lp_con0 = 0x0000000f,
+ .offset_rd_con0 = 0x08080808,
+ .offset_wr_con0 = 0x08080808,
+};
+
+static struct mx7_calibration calib_param = {
+ .num_val = 5,
+ .values = {
+ 0x0E407304,
+ 0x0E447304,
+ 0x0E447306,
+ 0x0E447304,
+ 0x0E447304,
+ },
+};
+
+static void gpr_init(void)
+{
+ struct iomuxc_gpr_base_regs *gpr_regs =
+ (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+ writel(0x4F400005, &gpr_regs->gpr[1]);
+}
+
+static bool is_1g(void)
+{
+ gpio_direction_input(IMX_GPIO_NR(1, 12));
+ return !gpio_get_value(IMX_GPIO_NR(1, 12));
+}
+
+static void ddr_init(void)
+{
+ if (is_1g()) {
+ ddrc_regs_val.addrmap5 = 0x07070707;
+ ddrc_regs_val.addrmap6 = 0x0f070707;
+ }
+
+ mx7_dram_cfg(&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val,
+ &calib_param);
+}
+
+void board_init_f(ulong dummy)
+{
+ arch_cpu_init();
+ gpr_init();
+ board_early_init_f();
+ timer_init();
+ preloader_console_init();
+ ddr_init();
+ memset(__bss_start, 0, __bss_end - __bss_start);
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
+#endif
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_PICO_IMX7D=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_IMX_RDC=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx7d/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MII is not set
#include "mx7_common.h"
-#define PHYS_SDRAM_SIZE SZ_1G
+#include "imx7_spl.h"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
projects / u-boot.git / commitdiff