ARM: stm32: Disable video output on DHSOM

The video output support is unused and disabling it saves about 20 kiB of space.
In case video output support is required, it can be re-enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 0ea6931e85adab0834073b438ac76dd33ce86037..bc73162e6205c18c58314cc00516371b30a92adc 100644 (file)
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
@@ -53,7 +54,6 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
@@ -147,18 +147,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
-CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
-CONFIG_VIDEO_STM32=y
-CONFIG_VIDEO_STM32_DSI=y
-CONFIG_VIDEO_STM32_MAX_XRES=1280
-CONFIG_VIDEO_STM32_MAX_YRES=800
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_BMP_24BPP=y
-CONFIG_BMP_32BPP=y
 # CONFIG_BINMAN_FDT is not set
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y

diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index fe204bb87a8d3f909cc035c04090d2f0032225fc..602946581324cc3f6b671406baf4ebb6952d7298 100644 (file)
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -20,6 +20,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
@@ -51,7 +52,6 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
@@ -141,18 +141,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
-CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
-CONFIG_VIDEO_STM32=y
-CONFIG_VIDEO_STM32_DSI=y
-CONFIG_VIDEO_STM32_MAX_XRES=1280
-CONFIG_VIDEO_STM32_MAX_YRES=800
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_BMP_24BPP=y
-CONFIG_BMP_32BPP=y
 CONFIG_FAT_WRITE=y
 # CONFIG_BINMAN_FDT is not set
 CONFIG_LZO=y