#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
/ {
model = "Microchip SAMA7G5-EK";
&pinctrl_gmac1_mdio_default
&pinctrl_gmac1_phy_irq>;
phy-mode = "rmii";
- status = "okay";
+ status = "okay"; /* Conflict with pdmc0. */
ethernet-phy@0 {
reg = <0x0>;
pinctrl-0 = <&pinctrl_i2s0_default>;
};
+&pdmc0 {
+ #sound-dai-cells = <0>;
+ microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+ <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+ <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+ <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+ status = "disabled"; /* Conflict with gmac1. */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
&pioA {
pinctrl_can0_default: can0_default {
bias-disable;
};
+ pinctrl_pdmc0_default: pdmc0_default {
+ pinmux = <PIN_PD23__PDMC0_DS0>,
+ <PIN_PD24__PDMC0_DS1>,
+ <PIN_PD22__PDMC0_CLK>;
+ bias_disable;
+ };
+
pinctrl_qspi: qspi {
pinmux = <PIN_PB12__QSPI0_IO0>,
<PIN_PB11__QSPI0_IO1>,
reg = <0x0>;
clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>;
clock-names = "cpu", "master", "xtal";
+ operating-points-v2 = <&cpu_opp_table>;
};
};
status = "disabled";
};
- rtt: rtt@e001d020 {
+ rtt: rtc@e001d020 {
compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
reg = <0xe001d020 0x30>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ pdmc0: sound@e1608000 {
+ compatible = "microchip,sama7g5-pdmc";
+ reg = <0xe1608000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+ dma-names = "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ pdmc1: sound@e160c000 {
+ compatible = "microchip,sama7g5-pdmc";
+ reg = <0xe160c000 0x1000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+ dma-names = "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
spdifrx: spdifrx@e1614000 {
#sound-dai-cells = <0>;
compatible = "microchip,sama7g5-spdifrx";
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
atmel,fifo-size = <32>;
- dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
- <&dma0 AT91_XDMAC_DT_PERID(8)>;
- dma-names = "rx", "tx";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+ <&dma0 AT91_XDMAC_DT_PERID(7)>;
+ dma-names = "tx", "rx";
status = "disabled";
};
};
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
atmel,fifo-size = <32>;
- dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
- <&dma0 AT91_XDMAC_DT_PERID(22)>;
- dma-names = "rx", "tx";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+ <&dma0 AT91_XDMAC_DT_PERID(21)>;
+ dma-names = "tx", "rx";
status = "disabled";
};
};
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
atmel,fifo-size = <32>;
- dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
- <&dma0 AT91_XDMAC_DT_PERID(24)>;
- dma-names = "rx", "tx";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+ <&dma0 AT91_XDMAC_DT_PERID(23)>;
+ dma-names = "tx", "rx";
status = "disabled";
};
};
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- interrupt-parent;
reg = <0xe8c11000 0x1000>,
<0xe8c12000 0x2000>;
};