armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes

In lx2160a soc, there are eight i2c controllers, this patch adds i2c
nodes for lx2160a, and the gpio2 nodes on which the i2c4 controller
depends.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 28220781d3fdde0b013e990ea5603ec74bba08c2..a189333e40947353c89b3c5119b60a7b41dbe4ba 100644 (file)
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -49,6 +49,80 @@
                             <1 10 0x8>; /* Hypervisor PPI, active-low */
        };
 
+       i2c0: i2c@2000000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2000000 0x0 0x10000>;
+               interrupts = <0 34 4>;
+               scl-gpio = <&gpio2 15 0>;
+               status = "disabled";
+       };
+
+       i2c1: i2c@2010000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2010000 0x0 0x10000>;
+               interrupts = <0 34 4>;
+               status = "disabled";
+       };
+
+       i2c2: i2c@2020000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2020000 0x0 0x10000>;
+               interrupts = <0 35 4>;
+               status = "disabled";
+       };
+
+       i2c3: i2c@2030000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2030000 0x0 0x10000>;
+               interrupts = <0 35 4>;
+               status = "disabled";
+       };
+
+       i2c4: i2c@2040000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2040000 0x0 0x10000>;
+               interrupts = <0 74 4>;
+               scl-gpio = <&gpio2 16 0>;
+               status = "disabled";
+       };
+
+       i2c5: i2c@2050000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2050000 0x0 0x10000>;
+               interrupts = <0 74 4>;
+               status = "disabled";
+       };
+
+       i2c6: i2c@2060000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2060000 0x0 0x10000>;
+               interrupts = <0 75 4>;
+               status = "disabled";
+       };
+
+       i2c7: i2c@2070000 {
+               compatible = "fsl,vf610-i2c";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x0 0x2070000 0x0 0x10000>;
+               interrupts = <0 75 4>;
+               status = "disabled";
+       };
+
        uart0: serial@21c0000 {
                compatible = "arm,pl011";
                reg = <0x0 0x21c0000 0x0 0x1000>;
@@ -102,6 +176,17 @@
                num-cs = <6>;
        };
 
+       gpio2: gpio@2320000 {
+               compatible = "fsl,qoriq-gpio";
+               reg = <0x0 0x2320000 0x0 0x10000>;
+               interrupts = <0 37 4>;
+               gpio-controller;
+               little-endian;
+               #gpio-cells = <2>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
        usb0: usb3@3100000 {
                compatible = "fsl,layerscape-dwc3";
                reg = <0x0 0x3100000 0x0 0x10000>;