* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+
+#define DEBUG
+
#ifndef USE_HOSTCC
#include <common.h>
#include <watchdog.h>
#include <dataflash.h>
#endif
+#ifdef CONFIG_LOGBUFFER
+#include <logbuff.h>
+#endif
+
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else
#include "mkimage.h"
debug (" ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n",
*rd_start, *rd_end);
}
+
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+/**
+ * ramdisk_high - relocate init ramdisk
+ * @rd_data: ramdisk data start address
+ * @rd_len: ramdisk data length
+ * @kbd: kernel board info copy (within BOOTMAPSZ boundary)
+ * @sp_limit: stack pointer limit (including BOOTMAPSZ)
+ * @sp: current stack pointer
+ * @initrd_start: pointer to a ulong variable, will hold final init ramdisk
+ * start address (after possible relocation)
+ * @initrd_end: pointer to a ulong variable, will hold final init ramdisk
+ * end address (after possible relocation)
+ *
+ * ramdisk_high() takes a relocation hint from "initrd_high" environement
+ * variable and if requested ramdisk data is moved to a specified location.
+ *
+ * returns:
+ * initrd_start and initrd_end are set to final (after relocation) ramdisk
+ * start/end addresses if ramdisk image start and len were provided
+ * otherwise set initrd_start and initrd_end to zeros
+ *
+ */
+void ramdisk_high (ulong rd_data, ulong rd_len, bd_t *kbd, ulong sp_limit,
+ ulong sp, ulong *initrd_start, ulong *initrd_end)
+{
+ char *s;
+ ulong initrd_high;
+ int initrd_copy_to_ram = 1;
+
+ if ((s = getenv ("initrd_high")) != NULL) {
+ /* a value of "no" or a similar string will act like 0,
+ * turning the "load high" feature off. This is intentional.
+ */
+ initrd_high = simple_strtoul (s, NULL, 16);
+ if (initrd_high == ~0)
+ initrd_copy_to_ram = 0;
+ } else {
+ /* not set, no restrictions to load high */
+ initrd_high = ~0;
+ }
+
+#ifdef CONFIG_LOGBUFFER
+ /* Prevent initrd from overwriting logbuffer */
+ if (initrd_high < (kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD))
+ initrd_high = kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD;
+ debug ("## Logbuffer at 0x%08lx ", kbd->bi_memsize - LOGBUFF_LEN);
+#endif
+ debug ("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
+ initrd_high, initrd_copy_to_ram);
+
+ if (rd_data) {
+ if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
+ debug (" in-place initrd\n");
+ *initrd_start = rd_data;
+ *initrd_end = rd_data + rd_len;
+ } else {
+ *initrd_start = (ulong)kbd - rd_len;
+ *initrd_start &= ~(4096 - 1); /* align on page */
+
+ if (initrd_high) {
+ ulong nsp;
+
+ /*
+ * the inital ramdisk does not need to be within
+ * CFG_BOOTMAPSZ as it is not accessed until after
+ * the mm system is initialised.
+ *
+ * do the stack bottom calculation again and see if
+ * the initrd will fit just below the monitor stack
+ * bottom without overwriting the area allocated
+ * for command line args and board info.
+ */
+ nsp = sp;
+ nsp -= 2048; /* just to be sure */
+ nsp &= ~0xF;
+
+ if (nsp > initrd_high) /* limit as specified */
+ nsp = initrd_high;
+
+ nsp -= rd_len;
+ nsp &= ~(4096 - 1); /* align on page */
+
+ if (nsp >= sp_limit)
+ *initrd_start = nsp;
+ }
+
+ show_boot_progress (12);
+
+ *initrd_end = *initrd_start + rd_len;
+ printf (" Loading Ramdisk to %08lx, end %08lx ... ",
+ *initrd_start, *initrd_end);
+
+ memmove_wd((void *)*initrd_start,
+ (void *)rd_data, rd_len, CHUNKSZ);
+
+ puts ("OK\n");
+ }
+ } else {
+ *initrd_start = 0;
+ *initrd_end = 0;
+ }
+ debug (" ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n",
+ *initrd_start, *initrd_end);
+}
+#endif /* CONFIG_PPC || CONFIG_M68K */
#endif /* USE_HOSTCC */
#include <command.h>
#ifndef USE_HOSTCC
#include <linux/string.h>
+#include <asm/u-boot.h>
#endif
/*
void get_ramdisk (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
image_header_t *hdr, int verify, uint8_t arch,
ulong *rd_start, ulong *rd_end);
-#endif /* USE_HOSTCCa */
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+void ramdisk_high (ulong rd_data_start, ulong rd_len, bd_t *kbd, ulong sp_limit,
+ ulong sp, ulong *initrd_start, ulong *initrd_end);
+#endif /* CONFIG_PPC || CONFIG_M68K */
+#endif /* USE_HOSTCC */
#endif /* __IMAGE_H__ */
# define SHOW_BOOT_PROGRESS(arg)
#endif
+static ulong get_sp (void);
+
void do_bootm_linux(cmd_tbl_t * cmdtp, int flag,
int argc, char *argv[],
image_header_t *hdr, int verify)
{
- ulong sp;
+ ulong sp_limit;
ulong rd_data_start, rd_data_end, rd_len;
- ulong initrd_high;
ulong initrd_start, initrd_end;
- int initrd_copy_to_ram = 1;
ulong cmd_start, cmd_end;
char *cmdline;
bd_t *kbd;
void (*kernel) (bd_t *, ulong, ulong, ulong, ulong);
- if ((s = getenv("initrd_high")) != NULL) {
- /* a value of "no" or a similar string will act like 0,
- * turning the "load high" feature off. This is intentional.
- */
- initrd_high = simple_strtoul(s, NULL, 16);
- if (initrd_high == ~0)
- initrd_copy_to_ram = 0;
- } else { /* not set, no restrictions to load high */
- initrd_high = ~0;
- }
-
-#ifdef CONFIG_LOGBUFFER
- kbd = gd->bd;
- /* Prevent initrd from overwriting logbuffer */
- if (initrd_high < (kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD))
- initrd_high = kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD;
- debug("## Logbuffer at 0x%08lX ", kbd->bi_memsize - LOGBUFF_LEN);
-#endif
-
/*
* Booting a (Linux) kernel image
*
* memory, which means far enough below the current stack
* pointer.
*/
- asm("movel %%a7, %%d0\n"
- "movel %%d0, %0\n": "=d"(sp): :"%d0");
+ sp_limit = get_sp();
- debug("## Current stack ends at 0x%08lX ", sp);
+ debug("## Current stack ends at 0x%08lX ", sp_limit);
- sp -= 2048; /* just to be sure */
- if (sp > CFG_BOOTMAPSZ)
- sp = CFG_BOOTMAPSZ;
- sp &= ~0xF;
+ sp_limit -= 2048; /* just to be sure */
+ if (sp_limit > CFG_BOOTMAPSZ)
+ sp_limit = CFG_BOOTMAPSZ;
+ sp_limit &= ~0xF;
- debug("=> set upper limit to 0x%08lX\n", sp);
+ debug("=> set upper limit to 0x%08lX\n", sp_limit);
- cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF);
+ cmdline = (char *)((sp_limit - CFG_BARGSIZE) & ~0xF);
kbd = (bd_t *) (((ulong) cmdline - sizeof(bd_t)) & ~0xF);
if ((s = getenv("bootargs")) == NULL)
kbd->bi_busfreq /= 1000000L;
}
+ /* find kernel */
kernel =
(void (*)(bd_t *, ulong, ulong, ulong, ulong))image_get_ep (hdr);
+ /* find ramdisk */
get_ramdisk (cmdtp, flag, argc, argv, hdr, verify,
IH_ARCH_M68K, &rd_data_start, &rd_data_end);
- rd_len = rd_data_end - rd_data_start;
- if (rd_data_start) {
- if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
- initrd_start = rd_data_start;
- initrd_end = rd_data_end;
- } else {
- initrd_start = (ulong) kbd - rd_len;
- initrd_start &= ~(4096 - 1); /* align on page */
-
- if (initrd_high) {
- ulong nsp;
-
- /*
- * the inital ramdisk does not need to be within
- * CFG_BOOTMAPSZ as it is not accessed until after
- * the mm system is initialised.
- *
- * do the stack bottom calculation again and see if
- * the initrd will fit just below the monitor stack
- * bottom without overwriting the area allocated
- * above for command line args and board info.
- */
- asm("movel %%a7, %%d0\n"
- "movel %%d0, %0\n": "=d"(nsp): :"%d0");
-
- nsp -= 2048; /* just to be sure */
- nsp &= ~0xF;
-
- if (nsp > initrd_high) /* limit as specified */
- nsp = initrd_high;
-
- nsp -= rd_len;
- nsp &= ~(4096 - 1); /* align on page */
-
- if (nsp >= sp)
- initrd_start = nsp;
- }
-
- SHOW_BOOT_PROGRESS(12);
-
- debug
- ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n",
- rd_data_start, rd_data_end - 1, rd_len, rd_len);
-
- initrd_end = initrd_start + rd_len;
- printf(" Loading Ramdisk to %08lx, end %08lx ... ",
- initrd_start, initrd_end);
-
- memmove_wd((void *)initrd_start,
- (void *)rd_data_start, rd_len, CHUNKSZ);
-
- puts("OK\n");
- }
- } else {
- initrd_start = 0;
- initrd_end = 0;
- }
+ rd_len = rd_data_end - rd_data_start;
+ ramdisk_high (rd_data_start, rd_len, kdb, sp_limit, get_sp (),
+ &initrd_start, &initrd_end);
debug("## Transferring control to Linux (at address %08lx) ...\n",
(ulong) kernel);
(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
/* does not return */
}
+
+static ulong get_sp (void)
+{
+ ulong sp;
+
+ asm("movel %%a7, %%d0\n"
+ "movel %%d0, %0\n": "=d"(sp): :"%d0");
+
+ return sp;
+}
static void fdt_error (const char *msg);
#endif
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
#ifdef CFG_INIT_RAM_LOCK
#include <asm/cache.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+static ulong get_sp (void);
#if defined(CONFIG_CMD_BDI)
-extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_bdinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif
void __attribute__((noinline))
image_header_t *hdr,
int verify)
{
- ulong initrd_high;
- int initrd_copy_to_ram = 1;
ulong initrd_start, initrd_end;
ulong rd_data_start, rd_data_end, rd_len;
ulong cmd_start, cmd_end;
char *cmdline;
- ulong sp;
+ ulong sp_limit;
char *s;
bd_t *kbd;
void (*kernel)(bd_t *, ulong, ulong, ulong, ulong);
ulong of_data = 0;
#endif
- if ((s = getenv ("initrd_high")) != NULL) {
- /* a value of "no" or a similar string will act like 0,
- * turning the "load high" feature off. This is intentional.
- */
- initrd_high = simple_strtoul(s, NULL, 16);
- if (initrd_high == ~0)
- initrd_copy_to_ram = 0;
- } else { /* not set, no restrictions to load high */
- initrd_high = ~0;
- }
-
-#ifdef CONFIG_LOGBUFFER
- kbd=gd->bd;
- /* Prevent initrd from overwriting logbuffer */
- if (initrd_high < (kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD))
- initrd_high = kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD;
- debug ("## Logbuffer at 0x%08lX ", kbd->bi_memsize-LOGBUFF_LEN);
-#endif
-
/*
* Booting a (Linux) kernel image
*
* pointer.
*/
- asm( "mr %0,1": "=r"(sp) : );
-
- debug ("## Current stack ends at 0x%08lX ", sp);
+ sp_limit = get_sp();
+ debug ("## Current stack ends at 0x%08lX ", sp_limit);
- sp -= 2048; /* just to be sure */
- if (sp > CFG_BOOTMAPSZ)
- sp = CFG_BOOTMAPSZ;
- sp &= ~0xF;
+ sp_limit -= 2048; /* just to be sure */
+ if (sp_limit > CFG_BOOTMAPSZ)
+ sp_limit = CFG_BOOTMAPSZ;
+ sp_limit &= ~0xF;
- debug ("=> set upper limit to 0x%08lX\n", sp);
+ debug ("=> set upper limit to 0x%08lX\n", sp_limit);
- cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF);
+ cmdline = (char *)((sp_limit - CFG_BARGSIZE) & ~0xF);
kbd = (bd_t *)(((ulong)cmdline - sizeof(bd_t)) & ~0xF);
if ((s = getenv("bootargs")) == NULL)
#endif /* CONFIG_MPC5xxx */
}
+ /* find kernel */
kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))image_get_ep (hdr);
+ /* find ramdisk */
get_ramdisk (cmdtp, flag, argc, argv, hdr, verify,
IH_ARCH_PPC, &rd_data_start, &rd_data_end);
+
rd_len = rd_data_end - rd_data_start;
+ ramdisk_high (rd_data_start, rd_len, kbd, sp_limit, get_sp (),
+ &initrd_start, &initrd_end);
+
#if defined(CONFIG_OF_LIBFDT)
+ /* find flattened device tree */
if(argc > 3) {
of_flat_tree = (char *) simple_strtoul(argv[3], NULL, 16);
fdt_hdr = (image_header_t *)of_flat_tree;
}
#endif
- if (rd_data_start) {
- if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
- initrd_start = rd_data_start;
- initrd_end = rd_data_end;
- } else {
- initrd_start = (ulong)kbd - rd_len;
- initrd_start &= ~(4096 - 1); /* align on page */
-
- if (initrd_high) {
- ulong nsp;
-
- /*
- * the inital ramdisk does not need to be within
- * CFG_BOOTMAPSZ as it is not accessed until after
- * the mm system is initialised.
- *
- * do the stack bottom calculation again and see if
- * the initrd will fit just below the monitor stack
- * bottom without overwriting the area allocated
- * above for command line args and board info.
- */
- asm( "mr %0,1": "=r"(nsp) : );
- nsp -= 2048; /* just to be sure */
- nsp &= ~0xF;
- if (nsp > initrd_high) /* limit as specified */
- nsp = initrd_high;
- nsp -= rd_len;
- nsp &= ~(4096 - 1); /* align on page */
- if (nsp >= sp)
- initrd_start = nsp;
- }
-
- show_boot_progress (12);
-
- debug ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n",
- rd_data_start, rd_data_end - 1, rd_len, rd_len);
-
- initrd_end = initrd_start + rd_len;
- printf (" Loading Ramdisk to %08lx, end %08lx ... ",
- initrd_start, initrd_end);
-
- memmove_wd((void *)initrd_start,
- (void *)rd_data_start, rd_len, CHUNKSZ);
-
- puts ("OK\n");
- }
- } else {
- initrd_start = 0;
- initrd_end = 0;
- }
#if defined(CONFIG_OF_LIBFDT)
/* does not return */
}
+static ulong get_sp (void)
+{
+ ulong sp;
+
+ asm( "mr %0,1": "=r"(sp) : );
+ return sp;
+}
+
#if defined(CONFIG_OF_LIBFDT)
static void fdt_error (const char *msg)
{
projects / u-boot.git / commitdiff