]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
PPC4xx: Use common code for Sequoia board SDRAM support
authorLarry Johnson <lrj@arlinx.com>
Sun, 30 Dec 2007 06:00:50 +0000 (01:00 -0500)
committerStefan Roese <sr@denx.de>
Fri, 4 Jan 2008 10:37:33 +0000 (11:37 +0100)
Signed-off-by: Larry Johnson <lrj@acm.org>
board/amcc/sequoia/sdram.c

index 78e2cb42a9a8743dfd238c661409d2d8913688bc..5e93f6c7a090e3880bf980112043a234c03589bd 100644 (file)
 #include <asm/io.h>
 #include <ppc440.h>
 
-#include "sdram.h"
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-       defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
-{
-       unsigned long val;
-       int wait = 0;
-
-       /* -----------------------------------------------------------+
-        * Wait for the DCC master delay line to finish calibration
-        * ----------------------------------------------------------*/
-       mtdcr(ddrcfga, DDR0_17);
-       val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
-       while (wait != 0xffff) {
-               val = mfdcr(ddrcfgd);
-               if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
-                       /* dlllockreg bit on */
-                       return 0;
-               else
-                       wait++;
-       }
-       debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
-       debug("Waiting for dlllockreg bit to raise\n");
-
-       return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
 /*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
-       unsigned long val;
-       int wait = 0;
-
-       /* --------------------------------------------------------------+
-        * Wait for 'DRAM initialization complete' bit in status register
-        * -------------------------------------------------------------*/
-       mtdcr(ddrcfga, DDR0_00);
-
-       while (wait != 0xffff) {
-               val = mfdcr(ddrcfgd);
-               if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
-                       /* 'DRAM initialization complete' bit */
-                       return 0;
-               else
-                       wait++;
-       }
-
-       debug("DRAM initialization complete bit in status register did not rise\n");
-
-       return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
-       int k, j;
-       u32 val;
-       u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
-       u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
-       u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
-       u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
-       volatile u32 *ram_pointer;
-       u32 test[NUM_TRIES] = {
-               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-       ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
-       for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
-               /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
-               /* -----------------------------------------------------------+
-                * De-assert 'start' parameter.
-                * ----------------------------------------------------------*/
-               mtdcr(ddrcfga, DDR0_02);
-               val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-               mtdcr(ddrcfgd, val);
-
-               /* -----------------------------------------------------------+
-                * Set 'wr_dqs_shift'
-                * ----------------------------------------------------------*/
-               mtdcr(ddrcfga, DDR0_09);
-               val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-                       | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-               mtdcr(ddrcfgd, val);
-
-               /* -----------------------------------------------------------+
-                * Set 'dqs_out_shift' = wr_dqs_shift + 32
-                * ----------------------------------------------------------*/
-               dqs_out_shift = wr_dqs_shift + 32;
-               mtdcr(ddrcfga, DDR0_22);
-               val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-                       | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-               mtdcr(ddrcfgd, val);
-
-               passing_cases = 0;
-
-               for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
-                       /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
-                       /* -----------------------------------------------------------+
-                        * Set 'dll_dqs_delay_X'.
-                        * ----------------------------------------------------------*/
-                       /* dll_dqs_delay_0 */
-                       mtdcr(ddrcfga, DDR0_17);
-                       val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-                               | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-                       mtdcr(ddrcfgd, val);
-                       /* dll_dqs_delay_1 to dll_dqs_delay_4 */
-                       mtdcr(ddrcfga, DDR0_18);
-                       val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-                               | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-                               | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-                               | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-                               | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-                       mtdcr(ddrcfgd, val);
-                       /* dll_dqs_delay_5 to dll_dqs_delay_8 */
-                       mtdcr(ddrcfga, DDR0_19);
-                       val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-                               | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-                               | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-                               | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-                               | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-                       mtdcr(ddrcfgd, val);
-
-                       ppcMsync();
-                       ppcMbar();
-
-                       /* -----------------------------------------------------------+
-                        * Assert 'start' parameter.
-                        * ----------------------------------------------------------*/
-                       mtdcr(ddrcfga, DDR0_02);
-                       val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-                       mtdcr(ddrcfgd, val);
-
-                       ppcMsync();
-                       ppcMbar();
-
-                       /* -----------------------------------------------------------+
-                        * Wait for the DCC master delay line to finish calibration
-                        * ----------------------------------------------------------*/
-                       if (wait_for_dlllock() != 0) {
-                               printf("dlllock did not occur !!!\n");
-                               printf("denali_core_search_data_eye!!!\n");
-                               printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-                                      wr_dqs_shift, dll_dqs_delay_X);
-                               hang();
-                       }
-                       ppcMsync();
-                       ppcMbar();
-
-                       if (wait_for_dram_init_complete() != 0) {
-                               printf("dram init complete did not occur !!!\n");
-                               printf("denali_core_search_data_eye!!!\n");
-                               printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-                                      wr_dqs_shift, dll_dqs_delay_X);
-                               hang();
-                       }
-                       udelay(100);  /* wait 100us to ensure init is really completed !!! */
-
-                       /* write values */
-                       for (j=0; j<NUM_TRIES; j++) {
-                               ram_pointer[j] = test[j];
-
-                               /* clear any cache at ram location */
-                               __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-                       }
-
-                       /* read values back */
-                       for (j=0; j<NUM_TRIES; j++) {
-                               for (k=0; k<NUM_READS; k++) {
-                                       /* clear any cache at ram location */
-                                       __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-                                       if (ram_pointer[j] != test[j])
-                                               break;
-                               }
-
-                               /* read error */
-                               if (k != NUM_READS)
-                                       break;
-                       }
-
-                       /* See if the dll_dqs_delay_X value passed.*/
-                       if (j < NUM_TRIES) {
-                               /* Failed */
-                               passing_cases = 0;
-                               /* break; */
-                       } else {
-                               /* Passed */
-                               if (passing_cases == 0)
-                                       dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
-                               passing_cases++;
-                               if (passing_cases >= max_passing_cases) {
-                                       max_passing_cases = passing_cases;
-                                       wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
-                                       dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
-                                       dll_dqs_delay_X_end_window = dll_dqs_delay_X;
-                               }
-                       }
-
-                       /* -----------------------------------------------------------+
-                        * De-assert 'start' parameter.
-                        * ----------------------------------------------------------*/
-                       mtdcr(ddrcfga, DDR0_02);
-                       val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-                       mtdcr(ddrcfgd, val);
-
-               } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
-       } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
-       /* -----------------------------------------------------------+
-        * Largest passing window is now detected.
-        * ----------------------------------------------------------*/
-
-       /* Compute dll_dqs_delay_X value */
-       dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
-       wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
-       debug("DQS calibration - Window detected:\n");
-       debug("max_passing_cases = %d\n", max_passing_cases);
-       debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
-       debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
-       debug("dll_dqs_delay_X window = %d - %d\n",
-              dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
-       /* -----------------------------------------------------------+
-        * De-assert 'start' parameter.
-        * ----------------------------------------------------------*/
-       mtdcr(ddrcfga, DDR0_02);
-       val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-       mtdcr(ddrcfgd, val);
-
-       /* -----------------------------------------------------------+
-        * Set 'wr_dqs_shift'
-        * ----------------------------------------------------------*/
-       mtdcr(ddrcfga, DDR0_09);
-       val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-               | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-       mtdcr(ddrcfgd, val);
-       debug("DDR0_09=0x%08lx\n", val);
-
-       /* -----------------------------------------------------------+
-        * Set 'dqs_out_shift' = wr_dqs_shift + 32
-        * ----------------------------------------------------------*/
-       dqs_out_shift = wr_dqs_shift + 32;
-       mtdcr(ddrcfga, DDR0_22);
-       val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-               | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-       mtdcr(ddrcfgd, val);
-       debug("DDR0_22=0x%08lx\n", val);
-
-       /* -----------------------------------------------------------+
-        * Set 'dll_dqs_delay_X'.
-        * ----------------------------------------------------------*/
-       /* dll_dqs_delay_0 */
-       mtdcr(ddrcfga, DDR0_17);
-       val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-               | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-       mtdcr(ddrcfgd, val);
-       debug("DDR0_17=0x%08lx\n", val);
-
-       /* dll_dqs_delay_1 to dll_dqs_delay_4 */
-       mtdcr(ddrcfga, DDR0_18);
-       val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-               | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-               | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-               | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-               | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-       mtdcr(ddrcfgd, val);
-       debug("DDR0_18=0x%08lx\n", val);
-
-       /* dll_dqs_delay_5 to dll_dqs_delay_8 */
-       mtdcr(ddrcfga, DDR0_19);
-       val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-               | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-               | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-               | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-               | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-       mtdcr(ddrcfgd, val);
-       debug("DDR0_19=0x%08lx\n", val);
-
-       /* -----------------------------------------------------------+
-        * Assert 'start' parameter.
-        * ----------------------------------------------------------*/
-       mtdcr(ddrcfga, DDR0_02);
-       val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-       mtdcr(ddrcfgd, val);
-
-       ppcMsync();
-       ppcMbar();
-
-       /* -----------------------------------------------------------+
-        * Wait for the DCC master delay line to finish calibration
-        * ----------------------------------------------------------*/
-       if (wait_for_dlllock() != 0) {
-               printf("dlllock did not occur !!!\n");
-               hang();
-       }
-       ppcMsync();
-       ppcMbar();
-
-       if (wait_for_dram_init_complete() != 0) {
-               printf("dram init complete did not occur !!!\n");
-               hang();
-       }
-       udelay(100);  /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
 
 #if defined(CONFIG_NAND_SPL)
 /* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
@@ -428,14 +96,14 @@ long int initdram (int board_type)
        mtsdram(DDR0_44, 0x00000003);
        mtsdram(DDR0_02, 0x00000001);
 
-       wait_for_dlllock();
+       denali_wait_for_dlllock();
 #endif /* #ifndef CONFIG_NAND_U_BOOT */
 
 #ifdef CONFIG_DDR_DATA_EYE
        /* -----------------------------------------------------------+
         * Perform data eye search if requested.
         * ----------------------------------------------------------*/
-       denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+       denali_core_search_data_eye();
 #endif
 
        return (CFG_MBYTES_SDRAM << 20);