Add QSPI definitions and clock configuration support.
Signed-off-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
#ifdef CONFIG_DRIVER_TI_CPSW
(*prcm)->cm_gmac_gmac_clkctrl,
#endif
+
+#ifdef CONFIG_TI_QSPI
+ (*prcm)->cm_l4per_qspi_clkctrl,
+#endif
0
};
clk_modules_explicit_en_essential,
1);
+#ifdef CONFIG_TI_QSPI
+ setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
.cm_l4per_gpio8_clkctrl = 0x4a009818,
.cm_l4per_mmcsd3_clkctrl = 0x4a009820,
.cm_l4per_mmcsd4_clkctrl = 0x4a009828,
+ .cm_l4per_qspi_clkctrl = 0x4a009838,
.cm_l4per_uart1_clkctrl = 0x4a009840,
.cm_l4per_uart2_clkctrl = 0x4a009848,
.cm_l4per_uart3_clkctrl = 0x4a009850,
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
+/* QSPI */
+#define QSPI_BASE 0x4B300000
+
/*
* Hardware Register Details
*/
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
+#define BOOT_DEVICE_SPI 10
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2
u32 cm_l4per_mmcsd4_clkctrl;
u32 cm_l4per_msprohg_clkctrl;
u32 cm_l4per_slimbus2_clkctrl;
+ u32 cm_l4per_qspi_clkctrl;
u32 cm_l4per_uart1_clkctrl;
u32 cm_l4per_uart2_clkctrl;
u32 cm_l4per_uart3_clkctrl;