These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
*/
immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
- {
- volatile fec_t *fecp;
-
- /*
- * only two FECs please
- */
- if ((unsigned int)fecidx >= 2)
- hang();
-
- if (fecidx == 0)
- fecp = &immr->im_cpm.cp_fec1;
- else
- fecp = &immr->im_cpm.cp_fec2;
-
- /* our PHYs are the limit at 2.5 MHz */
- fecp->fec_mii_speed <<= 1;
- }
-#endif
-
#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
/* use MDC for MII */
immr->im_ioport.iop_pdpar |= 0x0080;
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = netphone.o flash.o phone_console.o
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
-#if CONFIG_NETPHONE_VERSION == 2
- unsigned long size1;
-#endif
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size << 20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- flash_info[0].size = size;
-
-#if CONFIG_NETPHONE_VERSION == 2
- size1 = flash_get_size((vu_long *) FLASH_BASE4_PRELIM, &flash_info[1]);
- if (size1 > 0) {
- if (flash_info[1].flash_id == FLASH_UNKNOWN)
- printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20);
-
- /* Remap FLASH according to real size */
- memctl->memc_or4 = CONFIG_SYS_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
- memctl->memc_br4 = (CONFIG_SYS_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size1 = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
-
- size += size1;
- } else
- memctl->memc_br4 &= ~BR_V;
-#endif
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_MX:
- printf("MXIC ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
- short i;
- uchar mid;
- uchar pid;
- vu_char *caddr = (vu_char *) addr;
- ulong base = (ulong) addr;
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0x90;
-
- mid = caddr[0];
- switch (mid) {
- case (AMD_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (MX_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_MX;
- break;
- case (STM_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- pid = caddr[1]; /* device ID */
- switch (pid) {
- case (AMD_ID_LV400T & 0xFF):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV400B & 0xFF):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV800T & 0xFF):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800B & 0xFF):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV160T & 0xFF):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160B & 0xFF):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
- case (STM_ID_M29W040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & 0xFF):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV320B & 0xFF):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf(" ");
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection: D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (vu_char *) info->start[0];
-
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0xF0;
-
- udelay(20000);
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0x80;
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_char *) (info->start[sect]);
- addr[0] = 0x30;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer(0);
- last = start;
- addr = (vu_char *) (info->start[l_sect]);
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (vu_char *) info->start[0];
- addr[0] = 0xF0; /* reset bank */
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
-
- while (cnt > 0) {
- if ((rc = write_byte(info, addr++, *src++)) != 0) {
- return (rc);
- }
- --cnt;
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *) dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0xA0;
-
- *((vu_char *) dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <sed156x.h>
-#include <status_led.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b) (1U << (31-(_b)))
-#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b) (1U << (15-(_b)))
-#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b) (1U << (7-(_b)))
-#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b) _BD(_b)
-#define _BR(_l, _h) _BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
- printf ("Intracom NetPhone V%d\n", CONFIG_NETPHONE_VERSION);
- return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000 0x00000000
-#define CS_0001 0x10000000
-#define CS_0010 0x20000000
-#define CS_0011 0x30000000
-#define CS_0100 0x40000000
-#define CS_0101 0x50000000
-#define CS_0110 0x60000000
-#define CS_0111 0x70000000
-#define CS_1000 0x80000000
-#define CS_1001 0x90000000
-#define CS_1010 0xA0000000
-#define CS_1011 0xB0000000
-#define CS_1100 0xC0000000
-#define CS_1101 0xD0000000
-#define CS_1110 0xE0000000
-#define CS_1111 0xF0000000
-
-#define BS_0000 0x00000000
-#define BS_0001 0x01000000
-#define BS_0010 0x02000000
-#define BS_0011 0x03000000
-#define BS_0100 0x04000000
-#define BS_0101 0x05000000
-#define BS_0110 0x06000000
-#define BS_0111 0x07000000
-#define BS_1000 0x08000000
-#define BS_1001 0x09000000
-#define BS_1010 0x0A000000
-#define BS_1011 0x0B000000
-#define BS_1100 0x0C000000
-#define BS_1101 0x0D000000
-#define BS_1110 0x0E000000
-#define BS_1111 0x0F000000
-
-#define GPL0_AAAA 0x00000000
-#define GPL0_AAA0 0x00200000
-#define GPL0_AAA1 0x00300000
-#define GPL0_000A 0x00800000
-#define GPL0_0000 0x00A00000
-#define GPL0_0001 0x00B00000
-#define GPL0_111A 0x00C00000
-#define GPL0_1110 0x00E00000
-#define GPL0_1111 0x00F00000
-
-#define GPL1_0000 0x00000000
-#define GPL1_0001 0x00040000
-#define GPL1_1110 0x00080000
-#define GPL1_1111 0x000C0000
-
-#define GPL2_0000 0x00000000
-#define GPL2_0001 0x00010000
-#define GPL2_1110 0x00020000
-#define GPL2_1111 0x00030000
-
-#define GPL3_0000 0x00000000
-#define GPL3_0001 0x00004000
-#define GPL3_1110 0x00008000
-#define GPL3_1111 0x0000C000
-
-#define GPL4_0000 0x00000000
-#define GPL4_0001 0x00001000
-#define GPL4_1110 0x00002000
-#define GPL4_1111 0x00003000
-
-#define GPL5_0000 0x00000000
-#define GPL5_0001 0x00000400
-#define GPL5_1110 0x00000800
-#define GPL5_1111 0x00000C00
-#define LOOP 0x00000080
-
-#define EXEN 0x00000040
-
-#define AMX_COL 0x00000000
-#define AMX_ROW 0x00000020
-#define AMX_MAR 0x00000030
-
-#define NA 0x00000008
-
-#define UTA 0x00000004
-
-#define TODT 0x00000002
-
-#define LAST 0x00000001
-
-#define A10_AAAA GPL0_AAAA
-#define A10_AAA0 GPL0_AAA0
-#define A10_AAA1 GPL0_AAA1
-#define A10_000A GPL0_000A
-#define A10_0000 GPL0_0000
-#define A10_0001 GPL0_0001
-#define A10_111A GPL0_111A
-#define A10_1110 GPL0_1110
-#define A10_1111 GPL0_1111
-
-#define RAS_0000 GPL1_0000
-#define RAS_0001 GPL1_0001
-#define RAS_1110 GPL1_1110
-#define RAS_1111 GPL1_1111
-
-#define CAS_0000 GPL2_0000
-#define CAS_0001 GPL2_0001
-#define CAS_1110 GPL2_1110
-#define CAS_1111 GPL2_1111
-
-#define WE_0000 GPL3_0000
-#define WE_0001 GPL3_0001
-#define WE_1110 GPL3_1110
-#define WE_1111 GPL3_1111
-
-/* #define CAS_LATENCY 3 */
-#define CAS_LATENCY 2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
-#endif
-
- /* UPT */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
- CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-#if CONFIG_NETPHONE_VERSION == 2
-static const uint nandcs_table[0x40] = {
- /* RSS */
- CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111,
- CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */
-
- /* RBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
- /* WBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* UPT */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 ,
- CS_0001 | LAST,
-};
-#endif
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
- unsigned int i, j, v, vv;
- volatile unsigned int *p;
- unsigned int pv;
-
- p = (unsigned int *)addr;
- pv = (unsigned int)p;
- for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
- *p++ = pv;
-
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- v = (unsigned int)p;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- p++;
- }
-
- for (j = 0; j < 5; j++) {
- switch (j) {
- case 0: v = 0x00000000; break;
- case 1: v = 0xffffffff; break;
- case 2: v = 0x55555555; break;
- case 3: v = 0xaaaaaaaa; break;
- default:v = 0xdeadbeef; break;
- }
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- *p = v;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- *p = ~v;
- p++;
- }
- }
-}
-
-phys_size_t initdram(int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size;
-
- upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
- memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
- memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */
-
- udelay(200);
-
- /* perform SDRAM initialisation sequence */
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/
- udelay(1);
-
- memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */
-
- udelay(10000);
-
- {
- u32 d1, d2;
-
- d1 = 0xAA55AA55;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
-
- d1 = 0x55AA55AA;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
- }
-
- size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
- if (size == 0) {
- printf("SIZE is zero: LOOP on 0\n");
- for (;;) {
- *(volatile u32 *)0 = 0;
- (void)*(volatile u32 *)0;
- }
- }
-
- return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
- int phyno;
- unsigned short v;
-
- udelay(10000);
- /* reset the damn phys */
- mii_init();
-
- for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
- if (v == 0xFFFF)
- continue;
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
- udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
- BMCR_RESET | BMCR_ANENABLE);
- udelay(10000);
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK 0
-#define PA_GP_OUTMASK (_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15))
-#define PA_SP_MASK 0
-#define PA_ODR_VAL 0
-#define PA_GP_OUTVAL (_BW(3) | _BW(14) | _BW(15))
-#define PA_SP_DIRVAL 0
-
-#define PB_GP_INMASK _B(28)
-#define PB_GP_OUTMASK (_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_MASK (_BR(22, 25))
-#define PB_ODR_VAL 0
-#define PB_GP_OUTVAL (_B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_DIRVAL 0
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define PC_GP_INMASK _BW(12)
-#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(13) | _BW(15))
-#elif CONFIG_NETPHONE_VERSION == 2
-#define PC_GP_INMASK (_BW(13) | _BW(15))
-#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(12))
-#endif
-#define PC_SP_MASK 0
-#define PC_SOVAL 0
-#define PC_INTVAL 0
-#define PC_GP_OUTVAL (_BW(10) | _BW(11))
-#define PC_SP_DIRVAL 0
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define PE_GP_INMASK _B(31)
-#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30))
-#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27) | _B(28))
-#elif CONFIG_NETPHONE_VERSION == 2
-#define PE_GP_INMASK _BR(28, 31)
-#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27))
-#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27))
-#endif
-#define PE_SP_MASK 0
-#define PE_ODR_VAL 0
-#define PE_SP_DIRVAL 0
-
-int board_early_init_f(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *ioport = &immap->im_ioport;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /* NAND chip select */
-#if CONFIG_NETPHONE_VERSION == 1
- memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX);
- memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#elif CONFIG_NETPHONE_VERSION == 2
- upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
- memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
- memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA);
- memctl->memc_mamr = 0; /* all clear */
-#endif
-
- /* DSP chip select */
- memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX);
- memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-
-#if CONFIG_NETPHONE_VERSION == 1
- memctl->memc_br4 &= ~BR_V;
-#endif
- memctl->memc_br5 &= ~BR_V;
- memctl->memc_br6 &= ~BR_V;
- memctl->memc_br7 &= ~BR_V;
-
- ioport->iop_padat = PA_GP_OUTVAL;
- ioport->iop_paodr = PA_ODR_VAL;
- ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL;
- ioport->iop_papar = PA_SP_MASK;
-
- cpm->cp_pbdat = PB_GP_OUTVAL;
- cpm->cp_pbodr = PB_ODR_VAL;
- cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL;
- cpm->cp_pbpar = PB_SP_MASK;
-
- ioport->iop_pcdat = PC_GP_OUTVAL;
- ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL;
- ioport->iop_pcso = PC_SOVAL;
- ioport->iop_pcint = PC_INTVAL;
- ioport->iop_pcpar = PC_SP_MASK;
-
- cpm->cp_pedat = PE_GP_OUTVAL;
- cpm->cp_peodr = PE_ODR_VAL;
- cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL;
- cpm->cp_pepar = PE_SP_MASK;
-
- return 0;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
- /* XXX add here the really funky stuff */
-}
-
-#endif
-
-#ifdef CONFIG_SHOW_ACTIVITY
-
-static volatile int left_to_poll = PHONE_CONSOLE_POLL_HZ; /* poll */
-
-/* called from timer interrupt every 1/CONFIG_SYS_HZ sec */
-void board_show_activity(ulong timestamp)
-{
- if (left_to_poll > -PHONE_CONSOLE_POLL_HZ)
- --left_to_poll;
-}
-
-extern void phone_console_do_poll(void);
-
-static void do_poll(void)
-{
- unsigned int base;
-
- while (left_to_poll <= 0) {
- phone_console_do_poll();
- base = left_to_poll + PHONE_CONSOLE_POLL_HZ;
- do {
- left_to_poll = base;
- } while (base != left_to_poll);
- }
-}
-
-/* called when looping */
-void show_activity(int arg)
-{
- do_poll();
-}
-
-#endif
-
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
- /* printf("overwrite_console called\n"); */
- return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
- return drv_phone_init();
-}
-
-int last_stage_init(void)
-{
- int i;
-
-#if CONFIG_NETPHONE_VERSION == 2
- /* assert peripheral reset */
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
- for (i = 0; i < 10; i++)
- udelay(1000);
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |= _BW(12);
-#endif
- reset_phys();
-
- /* check in order to enable the local console */
- left_to_poll = PHONE_CONSOLE_POLL_HZ;
- i = CONFIG_SYS_HZ * 2;
- while (i > 0) {
-
- if (tstc()) {
- getc();
- break;
- }
-
- do_poll();
-
- if (drv_phone_use_me()) {
- status_led_set(0, STATUS_LED_ON);
- while (!drv_phone_is_idle()) {
- do_poll();
- udelay(1000000 / CONFIG_SYS_HZ);
- }
-
- console_assign(stdin, "phone");
- console_assign(stdout, "phone");
- console_assign(stderr, "phone");
- setenv("bootdelay", "-1");
- break;
- }
-
- udelay(1000000 / CONFIG_SYS_HZ);
- i--;
- left_to_poll--;
- }
- left_to_poll = PHONE_CONSOLE_POLL_HZ;
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2004 Intracom S.A.
- * Pantelis Antoniou <panto@intracom.gr>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * phone_console.c
- *
- * A phone based console
- *
- * Virtual display of 80x24 characters.
- * The actual display is much smaller and panned to show the virtual one.
- * Input is made by a numeric keypad utilizing the input method of
- * mobile phones. Sorry no T9 lexicons...
- *
- */
-
-#include <common.h>
-
-#include <version.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#include <sed156x.h>
-
-/*************************************************************************************************/
-
-#define ROWS 24
-#define COLS 80
-
-#define REFRESH_HZ (CONFIG_SYS_HZ/50) /* refresh every 20ms */
-#define BLINK_HZ (CONFIG_SYS_HZ/2) /* cursor blink every 500ms */
-
-/*************************************************************************************************/
-
-#define DISPLAY_BACKLIT_PORT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat
-#define DISPLAY_BACKLIT_MASK 0x0010
-
-/*************************************************************************************************/
-
-#define KP_STABLE_HZ (CONFIG_SYS_HZ/100) /* stable for 10ms */
-#define KP_REPEAT_DELAY_HZ (CONFIG_SYS_HZ/4) /* delay before repeat 250ms */
-#define KP_REPEAT_HZ (CONFIG_SYS_HZ/20) /* repeat every 50ms */
-#define KP_FORCE_DELAY_HZ (CONFIG_SYS_HZ/2) /* key was force pressed */
-#define KP_IDLE_DELAY_HZ (CONFIG_SYS_HZ/2) /* key was released and idle */
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_RXD_MASK 0x0008
-
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_TXD_MASK 0x0004
-
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_CLK_MASK 0x0001
-#elif CONFIG_NETPHONE_VERSION == 2
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_RXD_MASK 0x00000008
-
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_TXD_MASK 0x00000004
-
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_CLK_MASK 0x00000002
-#endif
-
-#define KP_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat)
-#define KP_CS_MASK 0x00000010
-
-#define KP_SPI_RXD() (KP_SPI_RXD_PORT & KP_SPI_RXD_MASK)
-
-#define KP_SPI_TXD(x) \
- do { \
- if (x) \
- KP_SPI_TXD_PORT |= KP_SPI_TXD_MASK; \
- else \
- KP_SPI_TXD_PORT &= ~KP_SPI_TXD_MASK; \
- } while(0)
-
-#define KP_SPI_CLK(x) \
- do { \
- if (x) \
- KP_SPI_CLK_PORT |= KP_SPI_CLK_MASK; \
- else \
- KP_SPI_CLK_PORT &= ~KP_SPI_CLK_MASK; \
- } while(0)
-
-#define KP_SPI_CLK_TOGGLE() (KP_SPI_CLK_PORT ^= KP_SPI_CLK_MASK)
-
-#define KP_SPI_BIT_DELAY() /* no delay */
-
-#define KP_CS(x) \
- do { \
- if (x) \
- KP_CS_PORT |= KP_CS_MASK; \
- else \
- KP_CS_PORT &= ~KP_CS_MASK; \
- } while(0)
-
-#define KP_ROWS 7
-#define KP_COLS 4
-
-#define KP_ROWS_MASK ((1 << KP_ROWS) - 1)
-#define KP_COLS_MASK ((1 << KP_COLS) - 1)
-
-#define SCAN 0
-#define SCAN_FILTER 1
-#define SCAN_COL 2
-#define SCAN_COL_FILTER 3
-#define PRESSED 4
-
-#define KP_F1 0 /* leftmost dot (tab) */
-#define KP_F2 1 /* middle left dot */
-#define KP_F3 2 /* up */
-#define KP_F4 3 /* middle right dot */
-#define KP_F5 4 /* rightmost dot */
-#define KP_F6 5 /* C */
-#define KP_F7 6 /* left */
-#define KP_F8 7 /* down */
-#define KP_F9 8 /* right */
-#define KP_F10 9 /* enter */
-#define KP_F11 10 /* R */
-#define KP_F12 11 /* save */
-#define KP_F13 12 /* redial */
-#define KP_F14 13 /* speaker */
-#define KP_F15 14 /* unused */
-#define KP_F16 15 /* unused */
-
-#define KP_RELEASE -1 /* key depressed */
-#define KP_FORCE -2 /* key was pressed for more than force hz */
-#define KP_IDLE -3 /* key was released and idle */
-
-#define KP_1 '1'
-#define KP_2 '2'
-#define KP_3 '3'
-#define KP_4 '4'
-#define KP_5 '5'
-#define KP_6 '6'
-#define KP_7 '7'
-#define KP_8 '8'
-#define KP_9 '9'
-#define KP_0 '0'
-#define KP_STAR '*'
-#define KP_HASH '#'
-
-/*************************************************************************************************/
-
-static int curs_disabled;
-static int curs_col, curs_row;
-static int disp_col, disp_row;
-
-static int width, height;
-
-/* the simulated vty buffer */
-static char vty_buf[ROWS * COLS];
-static char last_visible_buf[ROWS * COLS]; /* worst case */
-static char *last_visible_curs_ptr;
-static int last_visible_curs_rev;
-static int blinked_state;
-static int last_input_mode;
-static int refresh_time;
-static int blink_time;
-static char last_fast_punct;
-
-/*************************************************************************************************/
-
-#define IM_SMALL 0
-#define IM_CAPITAL 1
-#define IM_NUMBER 2
-
-static int input_mode;
-static char fast_punct;
-static int tab_indicator;
-static const char *fast_punct_list = ",.:;*";
-
-static const char *input_mode_txt[] = { "abc", "ABC", "123" };
-
-static const char *punct = ".,!;?'\"-()@/:_+&%*=<>$[]{}\\~^#|";
-static const char *whspace = " 0\n";
-/* per mode character select (for 2-9) */
-static const char *digits_sel[2][8] = {
- { /* small */
- "abc2", /* 2 */
- "def3", /* 3 */
- "ghi4", /* 4 */
- "jkl5", /* 5 */
- "mno6", /* 6 */
- "pqrs7", /* 7 */
- "tuv8", /* 8 */
- "wxyz9", /* 9 */
- }, { /* capital */
- "ABC2", /* 2 */
- "DEF3", /* 3 */
- "GHI4", /* 4 */
- "JKL5", /* 5 */
- "MNO6", /* 6 */
- "PQRS7", /* 7 */
- "TUV8", /* 8 */
- "WXYZ9", /* 9 */
- }
-};
-
-/*****************************************************************************/
-
-static void update(void);
-static void ensure_visible(int col, int row, int dx, int dy);
-
-static void console_init(void)
-{
- curs_disabled = 0;
- curs_col = 0;
- curs_row = 0;
-
- disp_col = 0;
- disp_row = 0;
-
- input_mode = IM_SMALL;
- fast_punct = ',';
- last_fast_punct = '\0';
- refresh_time = REFRESH_HZ;
- blink_time = BLINK_HZ;
-
- memset(vty_buf, ' ', sizeof(vty_buf));
-
- memset(last_visible_buf, ' ', sizeof(last_visible_buf));
- last_visible_curs_ptr = NULL;
- last_input_mode = -1;
- last_visible_curs_rev = 0;
-
- blinked_state = 0;
-
- sed156x_init();
- width = sed156x_text_width;
- height = sed156x_text_height - 1;
-
- tab_indicator = 0;
-}
-
-/*****************************************************************************/
-
-void phone_putc(const char c);
-
-/*****************************************************************************/
-
-static int queued_char = -1;
-static int enabled = 0;
-
-/*****************************************************************************/
-
-/* flush buffers */
-int phone_start(void)
-{
- console_init();
-
- update();
- sed156x_sync();
-
- enabled = 1;
- queued_char = 'U' - '@';
-
- /* backlit on */
- DISPLAY_BACKLIT_PORT &= ~DISPLAY_BACKLIT_MASK;
-
- return 0;
-}
-
-int phone_stop(void)
-{
- enabled = 0;
-
- sed156x_clear();
- sed156x_sync();
-
- /* backlit off */
- DISPLAY_BACKLIT_PORT |= DISPLAY_BACKLIT_MASK;
-
- return 0;
-}
-
-void phone_puts(const char *s)
-{
- int count = strlen(s);
-
- while (count--)
- phone_putc(*s++);
-}
-
-int phone_tstc(void)
-{
- return queued_char >= 0 ? 1 : 0;
-}
-
-int phone_getc(void)
-{
- int r;
-
- if (queued_char < 0)
- return -1;
-
- r = queued_char;
- queued_char = -1;
-
- return r;
-}
-
-/*****************************************************************************/
-
-int drv_phone_init(void)
-{
- struct stdio_dev console_dev;
-
- console_init();
-
- memset(&console_dev, 0, sizeof(console_dev));
- strcpy(console_dev.name, "phone");
- console_dev.ext = DEV_EXT_VIDEO; /* Video extensions */
- console_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
- console_dev.start = phone_start;
- console_dev.stop = phone_stop;
- console_dev.putc = phone_putc; /* 'putc' function */
- console_dev.puts = phone_puts; /* 'puts' function */
- console_dev.tstc = phone_tstc; /* 'tstc' function */
- console_dev.getc = phone_getc; /* 'getc' function */
-
- if (stdio_register(&console_dev) == 0)
- return 1;
-
- return 0;
-}
-
-static int use_me;
-
-int drv_phone_use_me(void)
-{
- return use_me;
-}
-
-static void kp_do_poll(void);
-
-void phone_console_do_poll(void)
-{
- int i, x, y;
-
- kp_do_poll();
-
- if (enabled) {
- /* do the blink */
- blink_time -= PHONE_CONSOLE_POLL_HZ;
- if (blink_time <= 0) {
- blink_time += BLINK_HZ;
- if (last_visible_curs_ptr) {
- i = last_visible_curs_ptr - last_visible_buf;
- x = i % width; y = i / width;
- sed156x_reverse_at(x, y, 1);
- last_visible_curs_rev ^= 1;
- }
- }
-
- /* do the refresh */
- refresh_time -= PHONE_CONSOLE_POLL_HZ;
- if (refresh_time <= 0) {
- refresh_time += REFRESH_HZ;
- sed156x_sync();
- }
- }
-
-}
-
-static int last_scancode = -1;
-static int forced_scancode = 0;
-static int input_state = -1;
-static int input_scancode = -1;
-static int input_selected_char = -1;
-static char input_covered_char;
-
-static void putchar_at_cursor(char c)
-{
- vty_buf[curs_row * COLS + curs_col] = c;
- ensure_visible(curs_col, curs_row, 1, 1);
-}
-
-static char getchar_at_cursor(void)
-{
- return vty_buf[curs_row * COLS + curs_col];
-}
-
-static void queue_input_char(char c)
-{
- if (c <= 0)
- return;
-
- queued_char = c;
-}
-
-static void terminate_input(void)
-{
- if (input_state < 0)
- return;
-
- if (input_selected_char >= 0)
- queue_input_char(input_selected_char);
-
- input_state = -1;
- input_selected_char = -1;
- putchar_at_cursor(input_covered_char);
-
- curs_disabled = 0;
- blink_time = BLINK_HZ;
- update();
-}
-
-static void handle_enabled_scancode(int scancode)
-{
- char c;
- int new_disp_col, new_disp_row;
- const char *sel;
-
-
- switch (scancode) {
-
- /* key was released */
- case KP_RELEASE:
- forced_scancode = 0;
- break;
-
- /* key was forced */
- case KP_FORCE:
-
- switch (last_scancode) {
- case '#':
- if (input_mode == IM_NUMBER) {
- input_mode = IM_CAPITAL;
- /* queue backspace to erase # */
- queue_input_char('\b');
- } else {
- input_mode = IM_NUMBER;
- fast_punct = '*';
- }
- update();
- break;
-
- case '0': case '1':
- case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
-
- if (input_state < 0)
- break;
-
- input_selected_char = last_scancode;
- putchar_at_cursor((char)input_selected_char);
- terminate_input();
-
- break;
-
- default:
- break;
- }
-
- break;
-
- /* release and idle */
- case KP_IDLE:
- input_scancode = -1;
- if (input_state < 0)
- break;
- terminate_input();
- break;
-
- /* change input mode */
- case '#':
- if (last_scancode == '#') /* no repeat */
- break;
-
- if (input_mode == IM_NUMBER) {
- input_scancode = scancode;
- input_state = 0;
- input_selected_char = scancode;
- input_covered_char = getchar_at_cursor();
- putchar_at_cursor((char)input_selected_char);
- terminate_input();
- break;
- }
-
- if (input_mode == IM_SMALL)
- input_mode = IM_CAPITAL;
- else
- input_mode = IM_SMALL;
-
- update();
- break;
-
- case '*':
- /* no repeat */
- if (last_scancode == scancode)
- break;
-
- if (input_state >= 0)
- terminate_input();
-
- input_scancode = fast_punct;
- input_state = 0;
- input_selected_char = input_scancode;
- input_covered_char = getchar_at_cursor();
- putchar_at_cursor((char)input_selected_char);
- terminate_input();
-
- break;
-
- case '0': case '1':
- case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
-
- /* no repeat */
- if (last_scancode == scancode)
- break;
-
- if (input_mode == IM_NUMBER) {
- input_scancode = scancode;
- input_state = 0;
- input_selected_char = scancode;
- input_covered_char = getchar_at_cursor();
- putchar_at_cursor((char)input_selected_char);
- terminate_input();
- break;
- }
-
- if (input_state >= 0 && input_scancode != scancode)
- terminate_input();
-
- if (input_state < 0) {
- curs_disabled = 1;
- input_scancode = scancode;
- input_state = 0;
- input_covered_char = getchar_at_cursor();
- } else
- input_state++;
-
- if (scancode == '0')
- sel = whspace;
- else if (scancode == '1')
- sel = punct;
- else
- sel = digits_sel[input_mode][scancode - '2'];
- c = *(sel + input_state);
- if (c == '\0') {
- input_state = 0;
- c = *sel;
- }
-
- input_selected_char = (int)c;
- putchar_at_cursor((char)input_selected_char);
- update();
-
- break;
-
- /* move visible display */
- case KP_F3: case KP_F8: case KP_F7: case KP_F9:
-
- new_disp_col = disp_col;
- new_disp_row = disp_row;
-
- switch (scancode) {
- /* up */
- case KP_F3:
- if (new_disp_row <= 0)
- break;
- new_disp_row--;
- break;
-
- /* down */
- case KP_F8:
- if (new_disp_row >= ROWS - height)
- break;
- new_disp_row++;
- break;
-
- /* left */
- case KP_F7:
- if (new_disp_col <= 0)
- break;
- new_disp_col--;
- break;
-
- /* right */
- case KP_F9:
- if (new_disp_col >= COLS - width)
- break;
- new_disp_col++;
- break;
- }
-
- /* no change? */
- if (disp_col == new_disp_col && disp_row == new_disp_row)
- break;
-
- disp_col = new_disp_col;
- disp_row = new_disp_row;
- update();
-
- break;
-
- case KP_F6: /* backspace */
- /* inputing something; no backspace sent, just cancel input */
- if (input_state >= 0) {
- input_selected_char = -1; /* cancel */
- terminate_input();
- break;
- }
- queue_input_char('\b');
- break;
-
- case KP_F10: /* enter */
- /* inputing something; first cancel input */
- if (input_state >= 0)
- terminate_input();
- queue_input_char('\r');
- break;
-
- case KP_F11: /* R -> Ctrl-C (abort) */
- if (input_state >= 0)
- terminate_input();
- queue_input_char('C' - 'Q'); /* ctrl-c */
- break;
-
- case KP_F5: /* F% -> Ctrl-U (clear line) */
- if (input_state >= 0)
- terminate_input();
- queue_input_char('U' - 'Q'); /* ctrl-c */
- break;
-
-
- case KP_F1: /* tab */
- /* inputing something; first cancel input */
- if (input_state >= 0)
- terminate_input();
- queue_input_char('\t');
- break;
-
- case KP_F2: /* change fast punct */
- sel = strchr(fast_punct_list, fast_punct);
- if (sel == NULL)
- sel = &fast_punct_list[0];
- sel++;
- if (*sel == '\0')
- sel = &fast_punct_list[0];
- fast_punct = *sel;
- update();
- break;
-
-
- }
-
- if (scancode != KP_FORCE && scancode != KP_IDLE) /* don't record forced or idle scancode */
- last_scancode = scancode;
-}
-
-static void scancode_action(int scancode)
-{
-#if 0
- if (scancode == KP_RELEASE)
- printf(" RELEASE\n");
- else if (scancode == KP_FORCE)
- printf(" FORCE\n");
- else if (scancode == KP_IDLE)
- printf(" IDLE\n");
- else if (scancode < 32)
- printf(" F%d", scancode + 1);
- else
- printf(" %c", (char)scancode);
- printf("\n");
-#endif
-
- if (enabled) {
- handle_enabled_scancode(scancode);
- return;
- }
-
- if (scancode == KP_FORCE && last_scancode == '*')
- use_me = 1;
-
- last_scancode = scancode;
-}
-
-/**************************************************************************************/
-
-/* update the display; make sure to update only the differences */
-static void update(void)
-{
- int i;
- char *s, *e, *t, *r, *b, *cp;
-
- if (input_mode != last_input_mode)
- sed156x_output_at(sed156x_text_width - 3, sed156x_text_height - 1, input_mode_txt[input_mode], 3);
-
- if (tab_indicator == 0) {
- sed156x_output_at(0, sed156x_text_height - 1, "\\t", 2);
- tab_indicator = 1;
- }
-
- if (fast_punct != last_fast_punct)
- sed156x_output_at(4, sed156x_text_height - 1, &fast_punct, 1);
-
- if (curs_disabled ||
- curs_col < disp_col || curs_col >= (disp_col + width) ||
- curs_row < disp_row || curs_row >= (disp_row + height)) {
- cp = NULL;
- } else
- cp = last_visible_buf + (curs_row - disp_row) * width + (curs_col - disp_col);
-
-
- /* printf("(%d,%d) (%d,%d) %s\n", curs_col, curs_row, disp_col, disp_row, cp ? "YES" : "no"); */
-
- /* clear previous cursor */
- if (last_visible_curs_ptr && last_visible_curs_rev == 0) {
- i = last_visible_curs_ptr - last_visible_buf;
- sed156x_reverse_at(i % width, i / width, 1);
- }
-
- b = vty_buf + disp_row * COLS + disp_col;
- t = last_visible_buf;
- for (i = 0; i < height; i++) {
- s = b;
- e = b + width;
- /* update only the differences */
- do {
- while (s < e && *s == *t) {
- s++;
- t++;
- }
- if (s == e) /* no more */
- break;
-
- /* find run */
- r = s;
- while (s < e && *s != *t)
- *t++ = *s++;
-
- /* and update */
- sed156x_output_at(r - b, i, r, s - r);
-
- } while (s < e);
-
- b += COLS;
- }
-
- /* set cursor */
- if (cp) {
- last_visible_curs_ptr = cp;
- i = last_visible_curs_ptr - last_visible_buf;
- sed156x_reverse_at(i % width, i / width, 1);
- last_visible_curs_rev = 0;
- } else {
- last_visible_curs_ptr = NULL;
- }
-
- last_input_mode = input_mode;
- last_fast_punct = fast_punct;
-}
-
-/* ensure visibility; the trick is to minimize the screen movement */
-static void ensure_visible(int col, int row, int dx, int dy)
-{
- int x1, y1, x2, y2, a1, b1, a2, b2;
-
- /* clamp visible region */
- if (col < 0) {
- dx -= col;
- col = 0;
- if (dx <= 0)
- dx = 1;
- }
-
- if (row < 0) {
- dy -= row;
- row = 0;
- if (dy <= 0)
- dy = 1;
- }
-
- if (col + dx > COLS)
- dx = COLS - col;
-
- if (row + dy > ROWS)
- dy = ROWS - row;
-
-
- /* move to easier to use vars */
- x1 = disp_col; y1 = disp_row;
- x2 = x1 + width; y2 = y1 + height;
- a1 = col; b1 = row;
- a2 = a1 + dx; b2 = b1 + dy;
-
- /* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */
-
- if (a2 > x2) {
- /* move to the right */
- x2 = a2;
- x1 = x2 - width;
- if (x1 < 0) {
- x1 = 0;
- x2 = width;
- }
- } else if (a1 < x1) {
- /* move to the left */
- x1 = a1;
- x2 = x1 + width;
- if (x2 > COLS) {
- x2 = COLS;
- x1 = x2 - width;
- }
- }
-
- if (b2 > y2) {
- /* move down */
- y2 = b2;
- y1 = y2 - height;
- if (y1 < 0) {
- y1 = 0;
- y2 = height;
- }
- } else if (b1 < y1) {
- /* move up */
- y1 = b1;
- y2 = y1 + width;
- if (y2 > ROWS) {
- y2 = ROWS;
- y1 = y2 - height;
- }
- }
-
- /* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */
-
- /* no movement? */
- if (disp_col == x1 && disp_row == y1)
- return;
-
- disp_col = x1;
- disp_row = y1;
-}
-
-/**************************************************************************************/
-
-static void newline(void)
-{
- curs_col = 0;
- if (curs_row + 1 < ROWS)
- curs_row++;
- else {
- memmove(vty_buf, vty_buf + COLS, COLS * (ROWS - 1));
- memset(vty_buf + (ROWS - 1) * COLS, ' ', COLS);
- }
-}
-
-void phone_putc(const char c)
-{
- int i;
-
- if (input_mode != -1) {
- input_selected_char = -1;
- terminate_input();
- }
-
- curs_disabled = 1;
- update();
-
- blink_time = BLINK_HZ;
-
- switch (c) {
- case '\a': /* ignore bell */
- case '\r': /* ignore carriage return */
- break;
-
- case '\n': /* next line */
- newline();
- ensure_visible(curs_col, curs_row, 1, 1);
- break;
-
- case 9: /* tab 8 */
- /* move to tab */
- i = curs_col;
- i |= 0x0008;
- i &= ~0x0007;
-
- if (i < COLS)
- curs_col = i;
- else
- newline();
-
- ensure_visible(curs_col, curs_row, 1, 1);
- break;
-
- case 8: /* backspace */
- if (curs_col <= 0)
- break;
- curs_col--;
-
- /* make sure that we see a couple of characters before */
- if (curs_col > 4)
- ensure_visible(curs_col - 4, curs_row, 4, 1);
- else
- ensure_visible(curs_col, curs_row, 1, 1);
-
- break;
-
- default: /* draw the char */
- putchar_at_cursor(c);
-
- /*
- * check for newline
- */
- if (curs_col + 1 < COLS)
- curs_col++;
- else
- newline();
-
- ensure_visible(curs_col, curs_row, 1, 1);
-
- break;
- }
-
- curs_disabled = 0;
- blink_time = BLINK_HZ;
- update();
-}
-
-/**************************************************************************************/
-
-static inline unsigned int kp_transfer(unsigned int val)
-{
- unsigned int rx;
- int b;
-
- rx = 0; b = 8;
- while (--b >= 0) {
- KP_SPI_TXD(val & 0x80);
- val <<= 1;
- KP_SPI_CLK_TOGGLE();
- KP_SPI_BIT_DELAY();
- rx <<= 1;
- if (KP_SPI_RXD())
- rx |= 1;
- KP_SPI_CLK_TOGGLE();
- KP_SPI_BIT_DELAY();
- }
-
- return rx;
-}
-
-unsigned int kp_data_transfer(unsigned int val)
-{
- KP_SPI_CLK(1);
- KP_CS(0);
- val = kp_transfer(val);
- KP_CS(1);
-
- return val;
-}
-
-unsigned int kp_get_col_mask(unsigned int row_mask)
-{
- unsigned int val, col_mask;
-
- val = 0x80 | (row_mask & 0x7F);
- (void)kp_data_transfer(val);
-#if CONFIG_NETPHONE_VERSION == 1
- col_mask = kp_data_transfer(val) & 0x0F;
-#elif CONFIG_NETPHONE_VERSION == 2
- col_mask = ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & 0x0f;
- /* XXX FUCK FUCK FUCK FUCK FUCK!!!! */
- col_mask = ((col_mask & 0x08) >> 3) | /* BKBR1 */
- ((col_mask & 0x04) << 1) | /* BKBR2 */
- (col_mask & 0x02) | /* BKBR3 */
- ((col_mask & 0x01) << 2); /* BKBR4 */
-
-#endif
- /* printf("col_mask(row_mask = 0x%x) -> col_mask = 0x%x\n", row_mask, col_mask); */
-
- return col_mask;
-}
-
-/**************************************************************************************/
-
-static const int kp_scancodes[KP_ROWS * KP_COLS] = {
- KP_F1, KP_F3, KP_F4, KP_F2,
- KP_F6, KP_F8, KP_F9, KP_F7,
- KP_1, KP_3, KP_F11, KP_2,
- KP_4, KP_6, KP_F12, KP_5,
- KP_7, KP_9, KP_F13, KP_8,
- KP_STAR, KP_HASH, KP_F14, KP_0,
- KP_F5, KP_F15, KP_F16, KP_F10,
-};
-
-static const int kp_repeats[KP_ROWS * KP_COLS] = {
- 0, 1, 0, 0,
- 0, 1, 1, 1,
- 1, 1, 0, 1,
- 1, 1, 0, 1,
- 1, 1, 0, 1,
- 1, 1, 0, 1,
- 0, 0, 0, 1,
-};
-
-static int kp_state = SCAN;
-static int kp_last_col_mask;
-static int kp_cur_row, kp_cur_col;
-static int kp_scancode;
-static int kp_stable;
-static int kp_repeat;
-static int kp_repeat_time;
-static int kp_force_time;
-static int kp_idle_time;
-
-static void kp_do_poll(void)
-{
- unsigned int col_mask;
- int col;
-
- switch (kp_state) {
- case SCAN:
- if (kp_idle_time > 0) {
- kp_idle_time -= PHONE_CONSOLE_POLL_HZ;
- if (kp_idle_time <= 0)
- scancode_action(KP_IDLE);
- }
-
- col_mask = kp_get_col_mask(KP_ROWS_MASK);
- if (col_mask == KP_COLS_MASK)
- break; /* nothing */
- kp_last_col_mask = col_mask;
- kp_stable = 0;
- kp_state = SCAN_FILTER;
- break;
-
- case SCAN_FILTER:
- col_mask = kp_get_col_mask(KP_ROWS_MASK);
- if (col_mask != kp_last_col_mask) {
- kp_state = SCAN;
- break;
- }
-
- kp_stable += PHONE_CONSOLE_POLL_HZ;
- if (kp_stable < KP_STABLE_HZ)
- break;
-
- kp_cur_row = 0;
- kp_stable = 0;
- kp_state = SCAN_COL;
-
- (void)kp_get_col_mask(1 << kp_cur_row);
- break;
-
- case SCAN_COL:
- col_mask = kp_get_col_mask(1 << kp_cur_row);
- if (col_mask == KP_COLS_MASK) {
- if (++kp_cur_row >= KP_ROWS) {
- kp_state = SCAN;
- break;
- }
- kp_get_col_mask(1 << kp_cur_row);
- break;
- }
- kp_last_col_mask = col_mask;
- kp_stable = 0;
- kp_state = SCAN_COL_FILTER;
- break;
-
- case SCAN_COL_FILTER:
- col_mask = kp_get_col_mask(1 << kp_cur_row);
- if (col_mask != kp_last_col_mask || col_mask == KP_COLS_MASK) {
- kp_state = SCAN;
- break;
- }
-
- kp_stable += PHONE_CONSOLE_POLL_HZ;
- if (kp_stable < KP_STABLE_HZ)
- break;
-
- for (col = 0; col < KP_COLS; col++)
- if ((col_mask & (1 << col)) == 0)
- break;
- kp_cur_col = col;
- kp_state = PRESSED;
- kp_scancode = kp_scancodes[kp_cur_row * KP_COLS + kp_cur_col];
- kp_repeat = kp_repeats[kp_cur_row * KP_COLS + kp_cur_col];
-
- if (kp_repeat)
- kp_repeat_time = KP_REPEAT_DELAY_HZ;
- kp_force_time = KP_FORCE_DELAY_HZ;
-
- scancode_action(kp_scancode);
-
- break;
-
- case PRESSED:
- col_mask = kp_get_col_mask(1 << kp_cur_row);
- if (col_mask != kp_last_col_mask) {
- kp_state = SCAN;
- scancode_action(KP_RELEASE);
- kp_idle_time = KP_IDLE_DELAY_HZ;
- break;
- }
-
- if (kp_repeat) {
- kp_repeat_time -= PHONE_CONSOLE_POLL_HZ;
- if (kp_repeat_time <= 0) {
- kp_repeat_time += KP_REPEAT_HZ;
- scancode_action(kp_scancode);
- }
- }
-
- if (kp_force_time > 0) {
- kp_force_time -= PHONE_CONSOLE_POLL_HZ;
- if (kp_force_time <= 0)
- scancode_action(KP_FORCE);
- }
-
- break;
- }
-}
-
-/**************************************************************************************/
-
-int drv_phone_is_idle(void)
-{
- return kp_state == SCAN;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = netta.o flash.o dsp.o codec.o pcmcia.o
+++ /dev/null
-/*
- * CODEC
- */
-
-#include <common.h>
-#include <post.h>
-
-#include "mpc8xx.h"
-
-/***********************************************/
-
-#define MAX_DUSLIC 4
-
-#define NUM_CHANNELS 2
-#define MAX_SLICS (MAX_DUSLIC * NUM_CHANNELS)
-
-/***********************************************/
-
-#define SOP_READ_CH_0 0xC4 /* Read SOP Register for Channel A */
-#define SOP_READ_CH_1 0xCC /* Read SOP Register for Channel B */
-#define SOP_WRITE_CH_0 0x44 /* Write SOP Register for Channel A */
-#define SOP_WRITE_CH_1 0x4C /* Write SOP Register for Channel B */
-
-#define COP_READ_CH_0 0xC5
-#define COP_READ_CH_1 0xCD
-#define COP_WRITE_CH_0 0x45
-#define COP_WRITE_CH_1 0x4D
-
-#define POP_READ_CH_0 0xC6
-#define POP_READ_CH_1 0xCE
-#define POP_WRITE_CH_0 0x46
-#define POP_WRITE_CH_1 0x4E
-
-#define RST_CMD_DUSLIC_CHIP 0x40 /* OR 0x48 */
-#define RST_CMD_DUSLIC_CH_A 0x41
-#define RST_CMD_DUSLIC_CH_B 0x49
-
-#define PCM_RESYNC_CMD_CH_A 0x42
-#define PCM_RESYNC_CMD_CH_B 0x4A
-
-#define ACTIVE_HOOK_LEV_4 0
-#define ACTIVE_HOOK_LEV_12 1
-
-#define SLIC_P_NORMAL 0x01
-
-/************************************************/
-
-#define CODSP_WR 0x00
-#define CODSP_RD 0x80
-#define CODSP_OP 0x40
-#define CODSP_ADR(x) (((unsigned char)(x) & 7) << 3)
-#define CODSP_M(x) ((unsigned char)(x) & 7)
-#define CODSP_CMD(x) ((unsigned char)(x) & 7)
-
-/************************************************/
-
-/* command indication ops */
-#define CODSP_M_SLEEP_PWRDN 7
-#define CODSP_M_PWRDN_HIZ 0
-#define CODSP_M_ANY_ACT 2
-#define CODSP_M_RING 5
-#define CODSP_M_ACT_MET 6
-#define CODSP_M_GND_START 4
-#define CODSP_M_RING_PAUSE 1
-
-/* single byte commands */
-#define CODSP_CMD_SOFT_RESET CODSP_CMD(0)
-#define CODSP_CMD_RESET_CH CODSP_CMD(1)
-#define CODSP_CMD_RESYNC CODSP_CMD(2)
-
-/* two byte commands */
-#define CODSP_CMD_SOP CODSP_CMD(4)
-#define CODSP_CMD_COP CODSP_CMD(5)
-#define CODSP_CMD_POP CODSP_CMD(6)
-
-/************************************************/
-
-/* read as 4-bytes */
-#define CODSP_INTREG_INT_CH 0x80000000
-#define CODSP_INTREG_HOOK 0x40000000
-#define CODSP_INTREG_GNDK 0x20000000
-#define CODSP_INTREG_GNDP 0x10000000
-#define CODSP_INTREG_ICON 0x08000000
-#define CODSP_INTREG_VRTLIM 0x04000000
-#define CODSP_INTREG_OTEMP 0x02000000
-#define CODSP_INTREG_SYNC_FAIL 0x01000000
-#define CODSP_INTREG_LM_THRES 0x00800000
-#define CODSP_INTREG_READY 0x00400000
-#define CODSP_INTREG_RSTAT 0x00200000
-#define CODSP_INTREG_LM_OK 0x00100000
-#define CODSP_INTREG_IO4_DU 0x00080000
-#define CODSP_INTREG_IO3_DU 0x00040000
-#define CODSP_INTREG_IO2_DU 0x00020000
-#define CODSP_INTREG_IO1_DU 0x00010000
-#define CODSP_INTREG_DTMF_OK 0x00008000
-#define CODSP_INTREG_DTMF_KEY4 0x00004000
-#define CODSP_INTREG_DTMF_KEY3 0x00002000
-#define CODSP_INTREG_DTMF_KEY2 0x00001000
-#define CODSP_INTREG_DTMF_KEY1 0x00000800
-#define CODSP_INTREG_DTMF_KEY0 0x00000400
-#define CODSP_INTREG_UTDR_OK 0x00000200
-#define CODSP_INTREG_UTDX_OK 0x00000100
-#define CODSP_INTREG_EDSP_FAIL 0x00000080
-#define CODSP_INTREG_CIS_BOF 0x00000008
-#define CODSP_INTREG_CIS_BUF 0x00000004
-#define CODSP_INTREG_CIS_REQ 0x00000002
-#define CODSP_INTREG_CIS_ACT 0x00000001
-
-/************************************************/
-
-/* ======== SOP REG ADDRESSES =======*/
-
-#define REVISION_ADDR 0x00
-#define PCMC1_ADDR 0x05
-#define XCR_ADDR 0x06
-#define INTREG1_ADDR 0x07
-#define INTREG2_ADDR 0x08
-#define INTREG3_ADDR 0x09
-#define INTREG4_ADDR 0x0A
-#define LMRES1_ADDR 0x0D
-#define MASK_ADDR 0x11
-#define IOCTL3_ADDR 0x14
-#define BCR1_ADDR 0x15
-#define BCR2_ADDR 0x16
-#define BCR3_ADDR 0x17
-#define BCR4_ADDR 0x18
-#define BCR5_ADDR 0x19
-#define DSCR_ADDR 0x1A
-#define LMCR1_ADDR 0x1C
-#define LMCR2_ADDR 0x1D
-#define LMCR3_ADDR 0x1E
-#define OFR1_ADDR 0x1F
-#define PCMR1_ADDR 0x21
-#define PCMX1_ADDR 0x25
-#define TSTR3_ADDR 0x2B
-#define TSTR4_ADDR 0x2C
-#define TSTR5_ADDR 0x2D
-
-/* ========= POP REG ADDRESSES ========*/
-
-#define CIS_DAT_ADDR 0x00
-
-#define LEC_LEN_ADDR 0x3A
-#define LEC_POWR_ADDR 0x3B
-#define LEC_DELP_ADDR 0x3C
-#define LEC_DELQ_ADDR 0x3D
-#define LEC_GAIN_XI_ADDR 0x3E
-#define LEC_GAIN_RI_ADDR 0x3F
-#define LEC_GAIN_XO_ADDR 0x40
-#define LEC_RES_1_ADDR 0x41
-#define LEC_RES_2_ADDR 0x42
-
-#define NLP_POW_LPF_ADDR 0x30
-#define NLP_POW_LPS_ADDR 0x31
-#define NLP_BN_LEV_X_ADDR 0x32
-#define NLP_BN_LEV_R_ADDR 0x33
-#define NLP_BN_INC_ADDR 0x34
-#define NLP_BN_DEC_ADDR 0x35
-#define NLP_BN_MAX_ADDR 0x36
-#define NLP_BN_ADJ_ADDR 0x37
-#define NLP_RE_MIN_ERLL_ADDR 0x38
-#define NLP_RE_EST_ERLL_ADDR 0x39
-#define NLP_SD_LEV_X_ADDR 0x3A
-#define NLP_SD_LEV_R_ADDR 0x3B
-#define NLP_SD_LEV_BN_ADDR 0x3C
-#define NLP_SD_LEV_RE_ADDR 0x3D
-#define NLP_SD_OT_DT_ADDR 0x3E
-#define NLP_ERL_LIN_LP_ADDR 0x3F
-#define NLP_ERL_LEC_LP_ADDR 0x40
-#define NLP_CT_LEV_RE_ADDR 0x41
-#define NLP_CTRL_ADDR 0x42
-
-#define UTD_CF_H_ADDR 0x4B
-#define UTD_CF_L_ADDR 0x4C
-#define UTD_BW_H_ADDR 0x4D
-#define UTD_BW_L_ADDR 0x4E
-#define UTD_NLEV_ADDR 0x4F
-#define UTD_SLEV_H_ADDR 0x50
-#define UTD_SLEV_L_ADDR 0x51
-#define UTD_DELT_ADDR 0x52
-#define UTD_RBRK_ADDR 0x53
-#define UTD_RTIME_ADDR 0x54
-#define UTD_EBRK_ADDR 0x55
-#define UTD_ETIME_ADDR 0x56
-
-#define DTMF_LEV_ADDR 0x30
-#define DTMF_TWI_ADDR 0x31
-#define DTMF_NCF_H_ADDR 0x32
-#define DTMF_NCF_L_ADDR 0x33
-#define DTMF_NBW_H_ADDR 0x34
-#define DTMF_NBW_L_ADDR 0x35
-#define DTMF_GAIN_ADDR 0x36
-#define DTMF_RES1_ADDR 0x37
-#define DTMF_RES2_ADDR 0x38
-#define DTMF_RES3_ADDR 0x39
-
-#define CIS_LEV_H_ADDR 0x43
-#define CIS_LEV_L_ADDR 0x44
-#define CIS_BRS_ADDR 0x45
-#define CIS_SEIZ_H_ADDR 0x46
-#define CIS_SEIZ_L_ADDR 0x47
-#define CIS_MARK_H_ADDR 0x48
-#define CIS_MARK_L_ADDR 0x49
-#define CIS_LEC_MODE_ADDR 0x4A
-
-/*=====================================*/
-
-#define HOOK_LEV_ACT_START_ADDR 0x89
-#define RO1_START_ADDR 0x70
-#define RO2_START_ADDR 0x95
-#define RO3_START_ADDR 0x96
-
-#define TG1_FREQ_START_ADDR 0x38
-#define TG1_GAIN_START_ADDR 0x39
-#define TG1_BANDPASS_START_ADDR 0x3B
-#define TG1_BANDPASS_END_ADDR 0x3D
-
-#define TG2_FREQ_START_ADDR 0x40
-#define TG2_GAIN_START_ADDR 0x41
-#define TG2_BANDPASS_START_ADDR 0x43
-#define TG2_BANDPASS_END_ADDR 0x45
-
-/*====================================*/
-
-#define PCM_HW_B 0x80
-#define PCM_HW_A 0x00
-#define PCM_TIME_SLOT_0 0x00 /* Byte 0 of PCM Frame (by default is assigned to channel A ) */
-#define PCM_TIME_SLOT_1 0x01 /* Byte 1 of PCM Frame (by default is assigned to channel B ) */
-#define PCM_TIME_SLOT_4 0x04 /* Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */
-
-#define RX_LEV_ADDR 0x28
-#define TX_LEV_ADDR 0x30
-#define Ik1_ADDR 0x83
-
-#define AR_ROW 3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
-#define AX_ROW 6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
-#define DCF_ROW 0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */
-
-/* Mark the start byte of Duslic parameters that we use with configurator */
-#define Ik1_START_BYTE 3
-#define RX_LEV_START_BYTE 0
-#define TX_LEV_START_BYTE 0
-
-/************************************************/
-
-#define INTREG4_CIS_ACT (1 << 0)
-
-#define BCR1_SLEEP 0x20
-#define BCR1_REVPOL 0x10
-#define BCR1_ACTR 0x08
-#define BCR1_ACTL 0x04
-#define BCR1_SLIC_MASK 0x03
-
-#define BCR2_HARD_POL_REV 0x40
-#define BCR2_TTX 0x20
-#define BCR2_TTX_12K 0x10
-#define BCR2_HIMAN 0x08
-#define BCR2_PDOT 0x01
-
-#define BCR3_PCMX_EN (1 << 4)
-
-#define BCR5_DTMF_EN (1 << 0)
-#define BCR5_DTMF_SRC (1 << 1)
-#define BCR5_LEC_EN (1 << 2)
-#define BCR5_LEC_OUT (1 << 3)
-#define BCR5_CIS_EN (1 << 4)
-#define BCR5_CIS_AUTO (1 << 5)
-#define BCR5_UTDX_EN (1 << 6)
-#define BCR5_UTDR_EN (1 << 7)
-
-#define DSCR_TG1_EN (1 << 0)
-#define DSCR_TG2_EN (1 << 1)
-#define DSCR_PTG (1 << 2)
-#define DSCR_COR8 (1 << 3)
-#define DSCR_DG_KEY(x) (((x) & 0x0F) << 4)
-
-#define CIS_LEC_MODE_CIS_V23 (1 << 0)
-#define CIS_LEC_MODE_CIS_FRM (1 << 1)
-#define CIS_LEC_MODE_NLP_EN (1 << 2)
-#define CIS_LEC_MODE_UTDR_SUM (1 << 4)
-#define CIS_LEC_MODE_UTDX_SUM (1 << 5)
-#define CIS_LEC_MODE_LEC_FREEZE (1 << 6)
-#define CIS_LEC_MODE_LEC_ADAPT (1 << 7)
-
-#define TSTR4_COR_64 (1 << 5)
-
-#define TSTR3_AC_DLB_8K (1 << 2)
-#define TSTR3_AC_DLB_32K (1 << 3)
-#define TSTR3_AC_DLB_4M (1 << 5)
-
-
-#define LMCR1_TEST_EN (1 << 7)
-#define LMCR1_LM_EN (1 << 6)
-#define LMCR1_LM_THM (1 << 5)
-#define LMCR1_LM_ONCE (1 << 2)
-#define LMCR1_LM_MASK (1 << 1)
-
-#define LMCR2_LM_RECT (1 << 5)
-#define LMCR2_LM_SEL_VDD 0x0D
-#define LMCR2_LM_SEL_IO3 0x0A
-#define LMCR2_LM_SEL_IO4 0x0B
-#define LMCR2_LM_SEL_IO4_MINUS_IO3 0x0F
-
-#define LMCR3_RTR_SEL (1 << 6)
-
-#define LMCR3_RNG_OFFSET_NONE 0x00
-#define LMCR3_RNG_OFFSET_1 0x01
-#define LMCR3_RNG_OFFSET_2 0x02
-#define LMCR3_RNG_OFFSET_3 0x03
-
-#define TSTR5_DC_HOLD (1 << 3)
-
-/************************************************/
-
-#define TARGET_ONHOOK_BATH_x100 4600 /* 46.0 Volt */
-#define TARGET_ONHOOK_BATL_x100 2500 /* 25.0 Volt */
-#define TARGET_V_DIVIDER_RATIO_x100 21376L /* (R1+R2)/R2 = 213.76 */
-#define DIVIDER_RATIO_ACCURx100 (22 * 100)
-#define V_AD_x10000 10834L /* VAD = 1.0834 */
-#define TARGET_VDDx100 330 /* VDD = 3.3 * 10 */
-#define VDD_MAX_DIFFx100 20 /* VDD Accur = 0.2*100 */
-
-#define RMS_MULTIPLIERx100 111 /* pi/(2xsqrt(2)) = 1.11*/
-#define K_INTDC_RECT_ON 4 /* When Rectifier is ON this value is necessary(2^4) */
-#define K_INTDC_RECT_OFF 2 /* 2^2 */
-#define RNG_FREQ 25
-#define SAMPLING_FREQ (2000L)
-#define N_SAMPLES (SAMPLING_FREQ/RNG_FREQ) /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */
-#define HOOK_THRESH_RING_START_ADDR 0x8B
-#define RING_PARAMS_START_ADDR 0x70
-
-#define V_OUT_BATH_MAX_DIFFx100 300 /* 3.0 x100 */
-#define V_OUT_BATL_MAX_DIFFx100 400 /* 4.0 x100 */
-#define MAX_V_RING_MEANx100 50
-#define TARGET_V_RING_RMSx100 2720
-#define V_RMS_RING_MAX_DIFFx100 250
-
-#define LM_OK_SRC_IRG_2 (1 << 4)
-
-/************************************************/
-
-#define PORTB (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define PORTC (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define PORTD (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
-
-#define _PORTD_SET(mask, state) \
- do { \
- if (state) \
- PORTD |= mask; \
- else \
- PORTD &= ~mask; \
- } while (0)
-
-#define _PORTB_SET(mask, state) \
- do { \
- if (state) \
- PORTB |= mask; \
- else \
- PORTB &= ~mask; \
- } while (0)
-
-#define _PORTB_TGL(mask) do { PORTB ^= mask; } while (0)
-#define _PORTB_GET(mask) (!!(PORTB & mask))
-
-#define _PORTC_GET(mask) (!!(PORTC & mask))
-
-/* port B */
-#define SPI_RXD (1 << (31 - 28))
-#define SPI_TXD (1 << (31 - 29))
-#define SPI_CLK (1 << (31 - 30))
-
-/* port C */
-#define COM_HOOK1 (1 << (15 - 9))
-#define COM_HOOK2 (1 << (15 - 10))
-
-#ifndef CONFIG_NETTA_SWAPHOOK
-
-#define COM_HOOK3 (1 << (15 - 11))
-#define COM_HOOK4 (1 << (15 - 12))
-
-#else
-
-#define COM_HOOK3 (1 << (15 - 12))
-#define COM_HOOK4 (1 << (15 - 11))
-
-#endif
-
-/* port D */
-#define SPIENC1 (1 << (15 - 9))
-#define SPIENC2 (1 << (15 - 10))
-#define SPIENC3 (1 << (15 - 11))
-#define SPIENC4 (1 << (15 - 14))
-
-#define SPI_DELAY() udelay(1)
-
-static inline unsigned int __SPI_Transfer(unsigned int tx)
-{
- unsigned int rx;
- int b;
-
- rx = 0; b = 8;
- while (--b >= 0) {
- _PORTB_SET(SPI_TXD, tx & 0x80);
- tx <<= 1;
- _PORTB_TGL(SPI_CLK);
- SPI_DELAY();
- rx <<= 1;
- rx |= _PORTB_GET(SPI_RXD);
- _PORTB_TGL(SPI_CLK);
- SPI_DELAY();
- }
-
- return rx;
-}
-
-static const char *codsp_dtmf_map = "D1234567890*#ABC";
-
-static const int spienc_mask_tab[4] = { SPIENC1, SPIENC2, SPIENC3, SPIENC4 };
-static const int com_hook_mask_tab[4] = { COM_HOOK1, COM_HOOK2, COM_HOOK3, COM_HOOK4 };
-
-static unsigned int codsp_send(int duslic_id, const unsigned char *cmd, int cmdlen, unsigned char *res, int reslen)
-{
- unsigned int rx;
- int i;
-
- /* just some sanity checks */
- if (cmd == 0 || cmdlen < 0)
- return -1;
-
- _PORTD_SET(spienc_mask_tab[duslic_id], 0);
-
- /* first 2 bytes are without response */
- i = 2;
- while (i-- > 0 && cmdlen-- > 0)
- __SPI_Transfer(*cmd++);
-
- while (cmdlen-- > 0) {
- rx = __SPI_Transfer(*cmd++);
- if (res != 0 && reslen-- > 0)
- *res++ = (unsigned char)rx;
- }
- if (res != 0) {
- while (reslen-- > 0)
- *res++ = __SPI_Transfer(0xFF);
- }
-
- _PORTD_SET(spienc_mask_tab[duslic_id], 1);
-
- return 0;
-}
-
-/****************************************************************************/
-
-void codsp_set_ciop_m(int duslic_id, int channel, unsigned char m)
-{
- unsigned char cmd = CODSP_WR | CODSP_ADR(channel) | CODSP_M(m);
- codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_reset_chip(int duslic_id)
-{
- static const unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_CMD_SOFT_RESET;
- codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_reset_channel(int duslic_id, int channel)
-{
- unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESET_CH;
- codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_resync_channel(int duslic_id, int channel)
-{
- unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESYNC;
- codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-/****************************************************************************/
-
-void codsp_write_sop_char(int duslic_id, int channel, unsigned char regno, unsigned char val)
-{
- unsigned char cmd[3];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
- cmd[2] = val;
-
- codsp_send(duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_sop_short(int duslic_id, int channel, unsigned char regno, unsigned short val)
-{
- unsigned char cmd[4];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
- cmd[2] = (unsigned char)(val >> 8);
- cmd[3] = (unsigned char)val;
-
- codsp_send(duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_write_sop_int(int duslic_id, int channel, unsigned char regno, unsigned int val)
-{
- unsigned char cmd[6];
-
- cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
- cmd[2] = (unsigned char)(val >> 24);
- cmd[3] = (unsigned char)(val >> 16);
- cmd[4] = (unsigned char)(val >> 8);
- cmd[5] = (unsigned char)val;
-
- codsp_send(duslic_id, cmd, 6, 0, 0);
-}
-
-unsigned char codsp_read_sop_char(int duslic_id, int channel, unsigned char regno)
-{
- unsigned char cmd[3];
- unsigned char res[2];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
-
- codsp_send(duslic_id, cmd, 2, res, 2);
-
- return res[1];
-}
-
-unsigned short codsp_read_sop_short(int duslic_id, int channel, unsigned char regno)
-{
- unsigned char cmd[2];
- unsigned char res[3];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
-
- codsp_send(duslic_id, cmd, 2, res, 3);
-
- return ((unsigned short)res[1] << 8) | res[2];
-}
-
-unsigned int codsp_read_sop_int(int duslic_id, int channel, unsigned char regno)
-{
- unsigned char cmd[2];
- unsigned char res[5];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
- cmd[1] = regno;
-
- codsp_send(duslic_id, cmd, 2, res, 5);
-
- return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4];
-}
-
-/****************************************************************************/
-
-void codsp_write_cop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block)
-{
- unsigned char cmd[10];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
- memcpy(cmd + 2, block, 8);
- codsp_send(duslic_id, cmd, 10, 0, 0);
-}
-
-void codsp_write_cop_char(int duslic_id, int channel, unsigned char addr, unsigned char val)
-{
- unsigned char cmd[3];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
- cmd[2] = val;
- codsp_send(duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_cop_short(int duslic_id, int channel, unsigned char addr, unsigned short val)
-{
- unsigned char cmd[4];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
- cmd[2] = (unsigned char)(val >> 8);
- cmd[3] = (unsigned char)val;
-
- codsp_send(duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_read_cop_block(int duslic_id, int channel, unsigned char addr, unsigned char *block)
-{
- unsigned char cmd[2];
- unsigned char res[9];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
- codsp_send(duslic_id, cmd, 2, res, 9);
- memcpy(block, res + 1, 8);
-}
-
-unsigned char codsp_read_cop_char(int duslic_id, int channel, unsigned char addr)
-{
- unsigned char cmd[2];
- unsigned char res[2];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
- codsp_send(duslic_id, cmd, 2, res, 2);
- return res[1];
-}
-
-unsigned short codsp_read_cop_short(int duslic_id, int channel, unsigned char addr)
-{
- unsigned char cmd[2];
- unsigned char res[3];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
- cmd[1] = addr;
-
- codsp_send(duslic_id, cmd, 2, res, 3);
-
- return ((unsigned short)res[1] << 8) | res[2];
-}
-
-/****************************************************************************/
-
-#define MAX_POP_BLOCK 50
-
-void codsp_write_pop_block (int duslic_id, int channel, unsigned char addr,
- const unsigned char *block, int len)
-{
- unsigned char cmd[2 + MAX_POP_BLOCK];
-
- if (len > MAX_POP_BLOCK) /* truncate */
- len = MAX_POP_BLOCK;
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = addr;
- memcpy (cmd + 2, block, len);
- codsp_send (duslic_id, cmd, 2 + len, 0, 0);
-}
-
-void codsp_write_pop_char (int duslic_id, int channel, unsigned char regno,
- unsigned char val)
-{
- unsigned char cmd[3];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
- cmd[2] = val;
-
- codsp_send (duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_pop_short (int duslic_id, int channel, unsigned char regno,
- unsigned short val)
-{
- unsigned char cmd[4];
-
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
- cmd[2] = (unsigned char) (val >> 8);
- cmd[3] = (unsigned char) val;
-
- codsp_send (duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_write_pop_int (int duslic_id, int channel, unsigned char regno,
- unsigned int val)
-{
- unsigned char cmd[6];
-
- cmd[0] = CODSP_WR | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
- cmd[2] = (unsigned char) (val >> 24);
- cmd[3] = (unsigned char) (val >> 16);
- cmd[4] = (unsigned char) (val >> 8);
- cmd[5] = (unsigned char) val;
-
- codsp_send (duslic_id, cmd, 6, 0, 0);
-}
-
-unsigned char codsp_read_pop_char (int duslic_id, int channel,
- unsigned char regno)
-{
- unsigned char cmd[3];
- unsigned char res[2];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
-
- codsp_send (duslic_id, cmd, 2, res, 2);
-
- return res[1];
-}
-
-unsigned short codsp_read_pop_short (int duslic_id, int channel,
- unsigned char regno)
-{
- unsigned char cmd[2];
- unsigned char res[3];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
-
- codsp_send (duslic_id, cmd, 2, res, 3);
-
- return ((unsigned short) res[1] << 8) | res[2];
-}
-
-unsigned int codsp_read_pop_int (int duslic_id, int channel,
- unsigned char regno)
-{
- unsigned char cmd[2];
- unsigned char res[5];
-
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
- cmd[1] = regno;
-
- codsp_send (duslic_id, cmd, 2, res, 5);
-
- return (((unsigned int) res[1] << 24) |
- ((unsigned int) res[2] << 16) |
- ((unsigned int) res[3] << 8) |
- res[4] );
-}
-/****************************************************************************/
-
-struct _coeffs {
- unsigned char addr;
- unsigned char values[8];
-};
-
-struct _coeffs ac_coeffs[11] = {
- { 0x60, {0xAD,0xDA,0xB5,0x9B,0xC7,0x2A,0x9D,0x00} }, /* 0x60 IM-Filter part 1 */
- { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x77,0x0A,0x00} }, /* 0x68 IM-Filter part 2 */
- { 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter */
- { 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter */
- { 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter */
- { 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter */
- { 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter */
- { 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter */
- { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, /* 0x00 TH-Filter part 1 */
- { 0x08, {0x81,0x00,0x80,0x00,0xD7,0x33,0xBA,0x01} }, /* 0x08 TH-Filter part 2 */
- { 0x10, {0xB3,0x6C,0xDC,0xA3,0xA4,0xE5,0x88,0x00} } /* 0x10 TH-Filter part 3 */
-};
-
-struct _coeffs ac_coeffs_0dB[11] = {
- { 0x60, {0xAC,0x2A,0xB5,0x9A,0xB7,0x2A,0x9D,0x00} },
- { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x83,0x0A,0x00} },
- { 0x18, {0x08,0x20,0xD4,0xA4,0x65,0xEE,0x92,0x07} },
- { 0x28, {0x2B,0xAB,0x36,0xA5,0x88,0x00,0x00,0x00} },
- { 0x48, {0xAB,0xE9,0x4E,0x32,0xAB,0x25,0xA5,0x03} },
- { 0x20, {0x08,0x20,0xDB,0x9C,0xA7,0xFA,0xB4,0x07} },
- { 0x30, {0xF3,0x10,0x07,0x60,0x85,0x40,0xC0,0x1A} },
- { 0x50, {0x96,0x38,0x29,0x97,0x39,0x19,0x8B,0x00} },
- { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} },
- { 0x08, {0x81,0x00,0x80,0x00,0x47,0x3C,0xD2,0x01} },
- { 0x10, {0x62,0xDB,0x4A,0x87,0x73,0x28,0x88,0x00} }
-};
-
-struct _coeffs dc_coeffs[9] = {
- { 0x80, {0x25,0x59,0x9C,0x23,0x24,0x23,0x32,0x1C} }, /* 0x80 DC-Parameter */
- { 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing */
- { 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters */
- { 0x88, {0xAF,0x80,0x27,0x7B,0x01,0x4C,0x7B,0x02} }, /* 0x88 Hook Levels */
- { 0x78, {0x00,0xC0,0x6D,0x7A,0xB3,0x78,0x89,0x00} }, /* 0x78 Ramp Generator */
- { 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX */
- { 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1 */
- { 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2 */
- { 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} } /* 0x98 Reserved */
-};
-
-void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_size)
-{
- int i;
-
- for (i = 0; i < tab_size; i++)
- codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values);
-}
-
-#define SS_OPEN_CIRCUIT 0
-#define SS_RING_PAUSE 1
-#define SS_ACTIVE 2
-#define SS_ACTIVE_HIGH 3
-#define SS_ACTIVE_RING 4
-#define SS_RINGING 5
-#define SS_ACTIVE_WITH_METERING 6
-#define SS_ONHOOKTRNSM 7
-#define SS_STANDBY 8
-#define SS_MAX 8
-
-static void codsp_set_slic(int duslic_id, int channel, int state)
-{
- unsigned char v;
-
- v = codsp_read_sop_char(duslic_id, channel, BCR1_ADDR);
-
- switch (state) {
-
- case SS_ACTIVE:
- codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTR) | BCR1_ACTL);
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
- break;
-
- case SS_ACTIVE_HIGH:
- codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTR | BCR1_ACTL));
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
- break;
-
- case SS_ACTIVE_RING:
- case SS_ONHOOKTRNSM:
- codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTL) | BCR1_ACTR);
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
- break;
-
- case SS_STANDBY:
- codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTL | BCR1_ACTR));
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_SLEEP_PWRDN);
- break;
-
- case SS_OPEN_CIRCUIT:
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_PWRDN_HIZ);
- break;
-
- case SS_RINGING:
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING);
- break;
-
- case SS_RING_PAUSE:
- codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING_PAUSE);
- break;
- }
-}
-
-const unsigned char Ring_Sin_28Vrms_25Hz[8] = { 0x90, 0x30, 0x1B, 0xC0, 0xC3, 0x9C, 0x88, 0x00 };
-const unsigned char Max_HookRingTh[3] = { 0x7B, 0x41, 0x62 };
-
-void retrieve_slic_state(int slic_id)
-{
- int duslic_id = slic_id >> 1;
- int channel = slic_id & 1;
-
- /* Retrieve the state of the SLICs */
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
-
- /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
- udelay(10000);
-
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
- codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
- codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40);
-
- /* Program Default Hook Ring thresholds */
- codsp_write_cop_block(duslic_id, channel, dc_coeffs[1].addr, dc_coeffs[1].values);
-
- /* Now program Hook Threshold while Ring and ac RingTrip to max values */
- codsp_write_cop_block(duslic_id, channel, dc_coeffs[3].addr, dc_coeffs[3].values);
-
- codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
- udelay(40000);
-}
-
-int wait_level_metering_finish(int duslic_id, int channel)
-{
- int cnt;
-
- for (cnt = 0; cnt < 1000 &&
- (codsp_read_sop_char(duslic_id, channel, INTREG2_ADDR) & LM_OK_SRC_IRG_2) == 0; cnt++) { }
-
- return cnt != 1000;
-}
-
-int measure_on_hook_voltages(int slic_id, long *vdd,
- long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v)
-{
- short LM_Result, Offset_Compensation; /* Signed 16 bit */
- long int VDD, VDD_diff, V_in, V_out, Divider_Ratio, Vout_diff ;
- unsigned char err_mask = 0;
- int duslic_id = slic_id >> 1;
- int channel = slic_id & 1;
- int i;
-
- /* measure VDD */
- /* Now select the VDD level Measurement (but first of all Hold the DC characteristic) */
- codsp_write_sop_char(duslic_id, channel, TSTR5_ADDR, TSTR5_DC_HOLD);
-
- /* Activate Test Mode ==> To Enable DC Hold !!! */
- /* (else the LMRES is treated as Feeding Current and the Feeding voltage changes */
- /* imediatelly (after 500us when the LMRES Registers is updated for the first time after selection of (IO4-IO3) measurement !!!!))*/
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
-
- udelay(40000);
-
- /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_VDD);
-
- /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
- udelay(10000);
-
- /* Now Read the LM Result Registers */
- LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- VDD = (-1)*((((long int)LM_Result) * 390L ) >> 15) ; /* VDDx100 */
-
- *vdd = VDD;
-
- VDD_diff = VDD - TARGET_VDDx100;
-
- if (VDD_diff < 0)
- VDD_diff = -VDD_diff;
-
- if (VDD_diff > VDD_MAX_DIFFx100)
- err_mask |= 1;
-
- Divider_Ratio = TARGET_V_DIVIDER_RATIO_x100;
-
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
- codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); /* Go back to ONHOOK Voltage */
-
- udelay(40000);
-
- codsp_write_sop_char(duslic_id, channel,
- LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
-
- udelay(40000);
-
- /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
-
- /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
- udelay(10000);
-
- /* Now Read the LM Result Registers */
- LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/
-
- V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
-
- *v_oh_H = V_out;
-
- Vout_diff = V_out - TARGET_ONHOOK_BATH_x100;
-
- if (Vout_diff < 0)
- Vout_diff = -Vout_diff;
-
- if (Vout_diff > V_OUT_BATH_MAX_DIFFx100)
- err_mask |= 2;
-
- codsp_set_slic(duslic_id, channel, SS_ACTIVE); /* Go back to ONHOOK Voltage */
-
- udelay(40000);
-
- /* Now Read the LM Result Registers */
- LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-
- V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/
-
- V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
-
- *v_oh_L = V_out;
-
- Vout_diff = V_out - TARGET_ONHOOK_BATL_x100;
-
- if (Vout_diff < 0)
- Vout_diff = -Vout_diff;
-
- if (Vout_diff > V_OUT_BATL_MAX_DIFFx100)
- err_mask |= 4;
-
- /* perform ring tests */
-
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
- udelay(40000);
-
- codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, LMCR3_RTR_SEL | LMCR3_RNG_OFFSET_NONE);
-
- /* Now program RO1 =0V , Ring Amplitude and frequency and shift factor K = 1 (LMDC=0x0088)*/
- codsp_write_cop_block(duslic_id, channel, RING_PARAMS_START_ADDR, Ring_Sin_28Vrms_25Hz);
-
- /* By Default RO1 is selected when ringing RNG-OFFSET = 00 */
-
- /* Now program Hook Threshold while Ring and ac RingTrip to max values */
- for(i = 0; i < sizeof(Max_HookRingTh); i++)
- codsp_write_cop_char(duslic_id, channel, HOOK_THRESH_RING_START_ADDR + i, Max_HookRingTh[i]);
-
- codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
- codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
-
- /* select source for the levelmeter to be IO4-IO3 */
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
-
- udelay(40000);
-
- /* Before Enabling Level Meter Programm the apropriate shift factor K_INTDC=(4 if Rectifier Enabled and 2 if Rectifier Disabled) */
- codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_OFF);
-
- udelay(10000);
-
- /* Enable LevelMeter to Integrate only once (Rectifier Disabled) */
- codsp_write_sop_char(duslic_id, channel,
- LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
- udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
-
- if (wait_level_metering_finish(duslic_id, channel)) {
-
- udelay(10000); /* To be sure that Integration Results are Valid wait at least 500us !!! */
-
- /* Now Read the LM Result Registers (Will be valid until LM_EN becomes zero again( after that the Result is updated every 500us) ) */
- Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_OFF)) / N_SAMPLES);
-
- /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
-
- /* Now programm Integrator Offset Registers !!! */
- codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
-
- codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing */
-
- udelay(40000);
-
- /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
- codsp_write_sop_char(duslic_id, channel,
- LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
- udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
-
- /* Poll the LM_OK bit to see when Integration Result is Ready */
- if (wait_level_metering_finish(duslic_id, channel)) {
-
- udelay(10000); /* wait at least 500us to be sure that the Integration Result are valid !!! */
-
- /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
- LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_OFF)) ; /* Vin x 10000*/
-
- V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
-
- if (V_out < 0)
- V_out= -V_out;
-
- if (V_out > MAX_V_RING_MEANx100)
- err_mask |= 8;
-
- *ring_mean_v = V_out;
- } else {
- err_mask |= 8;
- *ring_mean_v = 0;
- }
- } else {
- err_mask |= 8;
- *ring_mean_v = 0;
- }
-
- /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
- LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
- codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
- codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
-
- /* Now Enable Rectifier */
- /* select source for the levelmeter to be IO4-IO3 */
- codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR,
- LMCR2_LM_SEL_IO4_MINUS_IO3 | LMCR2_LM_RECT);
-
- /* Program the apropriate shift factor K_INTDC (in order to avoid Overflow at Integtation Result !!!) */
- codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_ON);
-
- udelay(40000);
-
- /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
- LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
- udelay(40000);
-
- /* Poll the LM_OK bit to see when Integration Result is Ready */
- if (wait_level_metering_finish(duslic_id, channel)) {
-
- udelay(10000);
-
- /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
- Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_ON)) / N_SAMPLES);
-
- /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
-
- /* Now programm Integrator Offset Registers !!! */
- codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
-
- /* Be sure that a Ring is generated !!!! */
- codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing again */
-
- udelay(40000);
-
- /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
- LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
- udelay(40000);
-
- /* Poll the LM_OK bit to see when Integration Result is Ready */
- if (wait_level_metering_finish(duslic_id, channel)) {
-
- udelay(10000);
-
- /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
- LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
- V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_ON) ) ; /* Vin x 10000*/
-
- V_out = (((V_in * Divider_Ratio) / 10000L) * RMS_MULTIPLIERx100) / 100 ; /* Vout_RMS x100 */
- if (V_out < 0)
- V_out = -V_out;
-
- Vout_diff = (V_out - TARGET_V_RING_RMSx100);
-
- if (Vout_diff < 0)
- Vout_diff = -Vout_diff;
-
- if (Vout_diff > V_RMS_RING_MAX_DIFFx100)
- err_mask |= 16;
-
- *ring_rms_v = V_out;
- } else {
- err_mask |= 16;
- *ring_rms_v = 0;
- }
- } else {
- err_mask |= 16;
- *ring_rms_v = 0;
- }
- /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
- codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
- retrieve_slic_state(slic_id);
-
- return(err_mask);
-}
-
-int test_dtmf(int slic_id)
-{
- unsigned char code;
- unsigned char b;
- unsigned int intreg;
- int duslic_id = slic_id >> 1;
- int channel = slic_id & 1;
-
- for (code = 0; code < 16; code++) {
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- (b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN);
- udelay(80000);
-
- intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR);
- if ((intreg & CODSP_INTREG_INT_CH) == 0)
- break;
-
- if ((intreg & CODSP_INTREG_DTMF_OK) == 0 ||
- codsp_dtmf_map[(intreg >> 10) & 15] != codsp_dtmf_map[code])
- break;
-
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
-
- udelay(80000);
-
- intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR); /* for dtmf_pause irq */
- }
-
- if (code != 16) {
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
- return(1);
- }
-
- return(0);
-}
-
-void data_up_persist_time(int duslic_id, int channel, int time_ms)
-{
- unsigned char b;
-
- b = codsp_read_sop_char(duslic_id, channel, IOCTL3_ADDR);
- b = (b & 0x0F) | ((time_ms & 0x0F) << 4);
- codsp_write_sop_char(duslic_id, channel, IOCTL3_ADDR, b);
-}
-
-static void program_dtmf_params(int duslic_id, int channel)
-{
- unsigned char b;
-
- codsp_write_pop_char(duslic_id, channel, DTMF_LEV_ADDR, 0x10);
- codsp_write_pop_char(duslic_id, channel, DTMF_TWI_ADDR, 0x0C);
- codsp_write_pop_char(duslic_id, channel, DTMF_NCF_H_ADDR, 0x79);
- codsp_write_pop_char(duslic_id, channel, DTMF_NCF_L_ADDR, 0x10);
- codsp_write_pop_char(duslic_id, channel, DTMF_NBW_H_ADDR, 0x02);
- codsp_write_pop_char(duslic_id, channel, DTMF_NBW_L_ADDR, 0xFB);
- codsp_write_pop_char(duslic_id, channel, DTMF_GAIN_ADDR, 0x91);
- codsp_write_pop_char(duslic_id, channel, DTMF_RES1_ADDR, 0x00);
- codsp_write_pop_char(duslic_id, channel, DTMF_RES2_ADDR, 0x00);
- codsp_write_pop_char(duslic_id, channel, DTMF_RES3_ADDR, 0x00);
-
- b = codsp_read_sop_char(duslic_id, channel, BCR5_ADDR);
- codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, b | BCR5_DTMF_EN);
-}
-
-static void codsp_channel_full_reset(int duslic_id, int channel)
-{
-
- program_coeffs(duslic_id, channel, ac_coeffs, sizeof(ac_coeffs) / sizeof(struct _coeffs));
- program_coeffs(duslic_id, channel, dc_coeffs, sizeof(dc_coeffs) / sizeof(struct _coeffs));
-
- /* program basic configuration registers */
- codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, 0x01);
- codsp_write_sop_char(duslic_id, channel, BCR2_ADDR, 0x41);
- codsp_write_sop_char(duslic_id, channel, BCR3_ADDR, 0x43);
- codsp_write_sop_char(duslic_id, channel, BCR4_ADDR, 0x00);
- codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, 0x00);
-
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, 0x04); /* PG */
-
- program_dtmf_params(duslic_id, channel);
-
- codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40); /* RingTRip_SEL */
-
- data_up_persist_time(duslic_id, channel, 4);
-
- codsp_write_sop_char(duslic_id, channel, MASK_ADDR, 0xFF); /* All interrupts masked */
-
- codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
-}
-
-static int codsp_chip_full_reset(int duslic_id)
-{
- int i, cnt;
- int intreg[NUM_CHANNELS];
- unsigned char pcm_resync;
- unsigned char revision;
-
- codsp_reset_chip(duslic_id);
-
- udelay(2000);
-
- for (i = 0; i < NUM_CHANNELS; i++)
- intreg[i] = codsp_read_sop_int(duslic_id, i, INTREG1_ADDR);
-
- udelay(1500);
-
- if (_PORTC_GET(com_hook_mask_tab[duslic_id]) == 0) {
- printf("_HOOK(%d) stayed low\n", duslic_id);
- return -1;
- }
-
- for (pcm_resync = 0, i = 0; i < NUM_CHANNELS; i++) {
- if (intreg[i] & CODSP_INTREG_SYNC_FAIL)
- pcm_resync |= 1 << i;
- }
-
- for (cnt = 0; cnt < 5 && pcm_resync; cnt++) {
- for (i = 0; i < NUM_CHANNELS; i++)
- codsp_resync_channel(duslic_id, i);
-
- udelay(2000);
-
- pcm_resync = 0;
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- if (codsp_read_sop_int(duslic_id, i, INTREG1_ADDR) & CODSP_INTREG_SYNC_FAIL)
- pcm_resync |= 1 << i;
- }
- }
-
- if (cnt == 5) {
- printf("PCM_Resync(%u) not completed\n", duslic_id);
- return -2;
- }
-
- revision = codsp_read_sop_char(duslic_id, 0, REVISION_ADDR);
- printf("DuSLIC#%d hardware version %d.%d\r\n", duslic_id, (revision & 0xF0) >> 4, revision & 0x0F);
-
- codsp_write_sop_char(duslic_id, 0, XCR_ADDR, 0x80); /* EDSP_EN */
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- codsp_write_sop_char(duslic_id, i, PCMC1_ADDR, 0x01);
- codsp_channel_full_reset(duslic_id, i);
- }
-
- return 0;
-}
-
-int slic_self_test(int duslic_mask)
-{
- int slic;
- int i;
- int r;
- long vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v;
- const char *err_txt[] = { "VDD", "V_OH_H", "V_OH_L", "V_RING_MEAN", "V_RING_RMS" };
- int error = 0;
-
- for (slic = 0; slic < MAX_SLICS; slic++) { /* voltages self test */
- if (duslic_mask & (1 << (slic >> 1))) {
- r = measure_on_hook_voltages(slic, &vdd,
- &v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v);
-
- printf("SLIC %u measured voltages (x100):\n\t"
- "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n",
- slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v);
-
- if (r != 0)
- error |= 1 << slic;
-
- for (i = 0; i < 5; i++)
- if (r & (1 << i))
- printf("\t%s out of range\n", err_txt[i]);
- }
- }
-
- for (slic = 0; slic < MAX_SLICS; slic++) { /* voice path self test */
- if (duslic_mask & (1 << (slic >> 1))) {
- printf("SLIC %u VOICE PATH...CHECKING", slic);
- printf("\rSLIC %u VOICE PATH...%s\n", slic,
- (r = test_dtmf(slic)) != 0 ? "FAILED " : "PASSED ");
-
- if (r != 0)
- error |= 1 << slic;
- }
- }
-
- return(error);
-}
-
-#if defined(CONFIG_NETTA_ISDN)
-
-#define SPIENS1 (1 << (31 - 15))
-#define SPIENS2 (1 << (31 - 19))
-
-static const int spiens_mask_tab[2] = { SPIENS1, SPIENS2 };
-int s_initialized = 0;
-
-static inline unsigned int s_transfer_internal(int s_id, unsigned int address, unsigned int value)
-{
- unsigned int rx, v;
-
- _PORTB_SET(spiens_mask_tab[s_id], 0);
-
- rx = __SPI_Transfer(address);
-
- switch (address & 0xF0) {
- case 0x60: /* write byte register */
- case 0x70:
- rx = __SPI_Transfer(value);
- break;
-
- case 0xE0: /* read R6 register */
- v = __SPI_Transfer(0);
-
- rx = (rx << 8) | v;
-
- break;
-
- case 0xF0: /* read byte register */
- rx = __SPI_Transfer(0);
-
- break;
- }
-
- _PORTB_SET(spiens_mask_tab[s_id], 1);
-
- return rx;
-}
-
-static void s_write_BR(int s_id, unsigned int regno, unsigned int val)
-{
- unsigned int address;
-
- address = 0x70 | (regno & 15);
- val &= 0xff;
-
- (void)s_transfer_internal(s_id, address, val);
-}
-
-static void s_write_OR(int s_id, unsigned int regno, unsigned int val)
-{
- unsigned int address;
-
- address = 0x70 | (regno & 15);
- val &= 0xff;
-
- (void)s_transfer_internal(s_id, address, val);
-}
-
-static void s_write_NR(int s_id, unsigned int regno, unsigned int val)
-{
- unsigned int address;
-
- address = (regno & 7) << 4;
- val &= 0xf;
-
- (void)s_transfer_internal(s_id, address | val, 0x00);
-}
-
-#define BR7_IFR 0x08 /* IDL2 free run */
-#define BR7_ICSLSB 0x04 /* IDL2 clock speed LSB */
-
-#define BR15_OVRL_REG_EN 0x80
-#define OR7_D3VR 0x80 /* disable 3V regulator */
-
-#define OR8_TEME 0x10 /* TE mode enable */
-#define OR8_MME 0x08 /* master mode enable */
-
-void s_initialize(void)
-{
- int s_id;
-
- for (s_id = 0; s_id < 2; s_id++) {
- s_write_BR(s_id, 7, BR7_IFR | BR7_ICSLSB);
- s_write_BR(s_id, 15, BR15_OVRL_REG_EN);
- s_write_OR(s_id, 8, OR8_TEME | OR8_MME);
- s_write_OR(s_id, 7, OR7_D3VR);
- s_write_OR(s_id, 6, 0);
- s_write_BR(s_id, 15, 0);
- s_write_NR(s_id, 3, 0);
- }
-}
-
-#endif
-
-int board_post_codec(int flags)
-{
- int j;
- int r;
- int duslic_mask;
-
- printf("board_post_dsp\n");
-
-#if defined(CONFIG_NETTA_ISDN)
- if (s_initialized == 0) {
- s_initialize();
- s_initialized = 1;
-
- printf("s_initialized\n");
-
- udelay(20000);
- }
-#endif
- duslic_mask = 0;
-
- for (j = 0; j < MAX_DUSLIC; j++) {
- if (codsp_chip_full_reset(j) < 0)
- printf("Error initializing DuSLIC#%d\n", j);
- else
- duslic_mask |= 1 << j;
- }
-
- if (duslic_mask != 0) {
- printf("Testing SLICs...\n");
-
- r = slic_self_test(duslic_mask);
- for (j = 0; j < MAX_SLICS; j++) {
- if (duslic_mask & (1 << (j >> 1)))
- printf("SLIC %u...%s\n", j, r & (1 << j) ? "FAULTY" : "OK");
- }
- }
- printf("DuSLIC self test finished\n");
-
- return 0; /* return -1 on error */
-}
+++ /dev/null
-/*
- * Intracom TI6711/TI6412 DSP
- */
-
-#include <common.h>
-#include <post.h>
-
-#include "mpc8xx.h"
-
-struct ram_range {
- u32 start;
- u32 size;
-};
-
-#if defined(CONFIG_NETTA_6412)
-
-static const struct ram_range int_ram[] = {
- { 0x00000000U, 0x00040000U },
-};
-
-static const struct ram_range ext_ram[] = {
- { 0x80000000U, 0x00100000U },
-};
-
-static const struct ram_range ranges[] = {
- { 0x00000000U, 0x00040000U },
- { 0x80000000U, 0x00100000U },
-};
-
-static inline u16 bit_invert(u16 d)
-{
- register u8 i;
- register u16 r;
- register u16 bit;
-
- r = 0;
- for (i = 0; i < 16; i++) {
- bit = d & (1 << i);
- if (bit != 0)
- r |= 1 << (15 - i);
- }
- return r;
-}
-
-#else
-
-static const struct ram_range int_ram[] = {
- { 0x00000000U, 0x00010000U },
-};
-
-static const struct ram_range ext_ram[] = {
- { 0x80000000U, 0x00100000U },
-};
-
-static const struct ram_range ranges[] = {
- { 0x00000000U, 0x00010000U },
- { 0x80000000U, 0x00100000U },
-};
-
-#endif
-
-/*******************************************************************************************************/
-
-static inline int addr_in_int_ram(u32 addr)
-{
- int i;
-
- for (i = 0; i < sizeof(int_ram)/sizeof(int_ram[0]); i++)
- if (addr >= int_ram[i].start && addr < int_ram[i].start + int_ram[i].size)
- return 1;
-
- return 0;
-}
-
-static inline int addr_in_ext_ram(u32 addr)
-{
- int i;
-
- for (i = 0; i < sizeof(ext_ram)/sizeof(ext_ram[0]); i++)
- if (addr >= ext_ram[i].start && addr < ext_ram[i].start + ext_ram[i].size)
- return 1;
-
- return 0;
-}
-
-/*******************************************************************************************************/
-
-#define DSP_HPIC 0x0
-#define DSP_HPIA 0x4
-#define DSP_HPID1 0x8
-#define DSP_HPID2 0xC
-
-static u32 dummy_delay;
-static volatile u32 *ti6711_delay = &dummy_delay;
-
-static inline void dsp_go_slow(void)
-{
- volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
-#if defined(CONFIG_NETTA_6412)
- memctl->memc_or6 |= OR_SCY_15_CLK | OR_TRLX;
-#else
- memctl->memc_or2 |= OR_SCY_15_CLK | OR_TRLX;
-#endif
- memctl->memc_or5 |= OR_SCY_15_CLK | OR_TRLX;
-
- ti6711_delay = (u32 *)DUMMY_BASE;
-}
-
-static inline void dsp_go_fast(void)
-{
- volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
-#if defined(CONFIG_NETTA_6412)
- memctl->memc_or6 = (memctl->memc_or6 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
-#else
- memctl->memc_or2 = (memctl->memc_or2 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_3_CLK;
-#endif
- memctl->memc_or5 = (memctl->memc_or5 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
-
- ti6711_delay = &dummy_delay;
-}
-
-/*******************************************************************************************************/
-
-static inline void dsp_delay(void)
-{
- /* perform ti6711_delay chip select read to have a small delay */
- (void) *(volatile u32 *)ti6711_delay;
-}
-
-static inline u16 dsp_read_hpic(void)
-{
-#if defined(CONFIG_NETTA_6412)
- return bit_invert(*((volatile u16 *)DSP_BASE));
-#else
- return *((volatile u16 *)DSP_BASE);
-#endif
-}
-
-static inline void dsp_write_hpic(u16 val)
-{
-#if defined(CONFIG_NETTA_6412)
- *((volatile u16 *)DSP_BASE) = bit_invert(val);
-#else
- *((volatile u16 *)DSP_BASE) = val;
-#endif
-}
-
-static inline void dsp_reset(void)
-{
-#if defined(CONFIG_NETTA_6412)
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15));
- udelay(500);
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 15));
- udelay(500);
-#else
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7));
- udelay(250);
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 7));
- udelay(250);
-#endif
-}
-
-static inline u32 dsp_read_hpic_word(u32 addr)
-{
- u32 val;
- volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
- p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-
- val = ((u32) bit_invert(p[0]) << 16);
- /* dsp_delay(); */
-
- val |= bit_invert(p[1]);
- /* dsp_delay(); */
-#else
- p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-
- val = ((u32) p[0] << 16);
- dsp_delay();
-
- val |= p[1];
- dsp_delay();
-#endif
- return val;
-}
-
-static inline u16 dsp_read_hpic_hi_hword(u32 addr)
-{
-#if defined(CONFIG_NETTA_6412)
- return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr));
-#else
- return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-#endif
-}
-
-static inline u16 dsp_read_hpic_lo_hword(u32 addr)
-{
-#if defined(CONFIG_NETTA_6412)
- return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2));
-#else
- return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2);
-#endif
-}
-
-static inline void dsp_wait_hrdy(void)
-{
- int i;
-
- i = 0;
-#if defined(CONFIG_NETTA_6412)
- while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
-#else
- while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
-#endif
- dsp_delay();
- i++;
- }
-}
-
-static inline void dsp_write_hpic_word(u32 addr, u32 val)
-{
- volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
- p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
- p[0] = bit_invert((u16)(val >> 16));
- /* dsp_delay(); */
-
- p[1] = bit_invert((u16)val);
- /* dsp_delay(); */
-#else
- p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
- p[0] = (u16)(val >> 16);
- dsp_delay();
-
- p[1] = (u16)val;
- dsp_delay();
-#endif
-}
-
-static inline void dsp_write_hpic_hi_hword(u32 addr, u16 val_h)
-{
-#if defined(CONFIG_NETTA_6412)
- *(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = bit_invert(val_h);
-#else
-
- *(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = val_h;
-#endif
-}
-
-static inline void dsp_write_hpic_lo_hword(u32 addr, u16 val_l)
-{
-#if defined(CONFIG_NETTA_6412)
- *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = bit_invert(val_l);
-#else
- *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = val_l;
-#endif
-}
-
-/********************************************************************/
-
-static inline void c62_write_word(u32 addr, u32 val)
-{
- dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
- dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
-
- dsp_wait_hrdy();
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
- dsp_write_hpic_hi_hword(DSP_HPID2, (u16)(val >> 16));
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-
- /* dsp_wait_hrdy();
- dsp_delay(); */
-#endif
- dsp_write_hpic_lo_hword(DSP_HPID2, (u16)val);
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
-}
-
-static u32 c62_read_word(u32 addr)
-{
- u32 val;
-
- dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
- dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
-
- /* FETCH */
-#if defined(CONFIG_NETTA_6412)
- dsp_write_hpic_word(DSP_HPIC, 0x00100010);
-#else
- dsp_write_hpic(0x10);
- dsp_delay();
-#endif
- dsp_wait_hrdy();
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
- val = (u32)dsp_read_hpic_hi_hword(DSP_HPID2) << 16;
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-
- /* dsp_wait_hrdy();
- dsp_delay(); */
-#endif
- val |= dsp_read_hpic_lo_hword(DSP_HPID2);
-#if !defined(CONFIG_NETTA_6412)
- dsp_delay();
-#endif
- return val;
-}
-
-static inline void c62_read(u32 addr, u32 *buffer, int numdata)
-{
- int i;
-
- if (numdata <= 0)
- return;
-
- for (i = 0; i < numdata; i++) {
- *buffer++ = c62_read_word(addr);
- addr += 4;
- }
-}
-
-static inline u32 c62_checksum(u32 addr, int numdata)
-{
- int i;
- u32 chksum;
-
- chksum = 0;
- for (i = 0; i < numdata; i++) {
- chksum += c62_read_word(addr);
- addr += 4;
- }
-
- return chksum;
-}
-
-static inline void c62_write(u32 addr, const u32 *buffer, int numdata)
-{
- int i;
-
- if (numdata <= 0)
- return;
-
- for (i = 0; i < numdata; i++) {
- c62_write_word(addr, *buffer++);
- addr += 4;
- }
-}
-
-static inline int c62_write_word_validated(u32 addr, u32 val)
-{
- c62_write_word(addr, val);
- return c62_read_word(addr) == val ? 0 : -1;
-}
-
-static inline int c62_write_validated(u32 addr, const u32 *buffer, int numdata)
-{
- int i, r;
-
- if (numdata <= 0)
- return 0;
-
- for (i = 0; i < numdata; i++) {
- r = c62_write_word_validated(addr, *buffer++);
- if (r < 0)
- return r;
- addr += 4;
- }
- return 0;
-}
-
-#if defined(CONFIG_NETTA_6412)
-
-#define DRAM_REGS_BASE 0x1800000
-
-#define GBLCTL DRAM_REGS_BASE
-#define CECTL1 (DRAM_REGS_BASE + 0x4)
-#define CECTL0 (DRAM_REGS_BASE + 0x8)
-#define CECTL2 (DRAM_REGS_BASE + 0x10)
-#define CECTL3 (DRAM_REGS_BASE + 0x14)
-#define SDCTL (DRAM_REGS_BASE + 0x18)
-#define SDTIM (DRAM_REGS_BASE + 0x1C)
-#define SDEXT (DRAM_REGS_BASE + 0x20)
-#define SESEC1 (DRAM_REGS_BASE + 0x44)
-#define SESEC0 (DRAM_REGS_BASE + 0x48)
-#define SESEC2 (DRAM_REGS_BASE + 0x50)
-#define SESEC3 (DRAM_REGS_BASE + 0x54)
-
-#define MAR128 0x1848200
-#define MAR129 0x1848204
-
-void dsp_dram_initialize(void)
-{
- c62_write_word(GBLCTL, 0x120E4);
- c62_write_word(CECTL1, 0x18);
- c62_write_word(CECTL0, 0xD0);
- c62_write_word(CECTL2, 0x18);
- c62_write_word(CECTL3, 0x18);
- c62_write_word(SDCTL, 0x47115000);
- c62_write_word(SDTIM, 1536);
- c62_write_word(SDEXT, 0x534A9);
-#if 0
- c62_write_word(SESEC1, 0);
- c62_write_word(SESEC0, 0);
- c62_write_word(SESEC2, 0);
- c62_write_word(SESEC3, 0);
-#endif
- c62_write_word(MAR128, 1);
- c62_write_word(MAR129, 0);
-}
-
-#endif
-
-static inline void dsp_init_hpic(void)
-{
- int i;
- volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
- dsp_go_fast();
-#else
- dsp_go_slow();
-#endif
- i = 0;
-#if defined(CONFIG_NETTA_6412)
- while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
-#else
- while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
-#endif
- dsp_delay();
- i++;
- }
-
- if (i == 1000)
- printf("HRDY stuck\n");
-
- dsp_delay();
-
- /* write control register */
- p = (volatile u16 *)DSP_BASE;
- p[0] = 0x0000;
- dsp_delay();
- p[1] = 0x0000;
- dsp_delay();
-
-#if !defined(CONFIG_NETTA_6412)
- dsp_go_fast();
-#endif
-}
-
-/***********************************************************************************************************/
-
-#if !defined(CONFIG_NETTA_6412)
-
-static const u8 bootstrap_rbin[5084] = {
- 0x52, 0x42, 0x49, 0x4e, 0xc5, 0xa9, 0x9f, 0x1a, 0x00, 0x00, 0x00, 0x02,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x20, 0x00,
- 0x00, 0x00, 0x11, 0xc0, 0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a,
- 0x00, 0x00, 0x03, 0x62, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a, 0x00, 0x00, 0x03, 0x62,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x90, 0x10, 0x5a,
- 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64,
- 0x02, 0x00, 0x00, 0xaa, 0x02, 0x10, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00,
- 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x9f, 0x7a,
- 0x30, 0x00, 0x08, 0x10, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
- 0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x00, 0x02, 0xd6, 0xc8,
- 0x00, 0x10, 0x02, 0xf4, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x03, 0x1a, 0xf7, 0xca, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
- 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0xcf, 0x5a,
- 0x02, 0x90, 0x02, 0xf6, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x02, 0x90, 0x10, 0x5a, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
- 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x03, 0x18, 0x2f, 0xda,
- 0x03, 0x10, 0x02, 0xf6, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x03, 0x1a, 0x10, 0x8a, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x19, 0x2e, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x03, 0x00, 0x00, 0xaa,
- 0x02, 0x98, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xbf, 0x7a, 0x22, 0x90, 0x02, 0xe6,
- 0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xd6, 0x8a, 0x22, 0x90, 0x02, 0xf6,
- 0x22, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xf7, 0x8a,
- 0x22, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
- 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x4f, 0x58, 0x02, 0x00, 0x12, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76, 0x92, 0x00, 0x12, 0x2a,
- 0x92, 0x00, 0xc8, 0x6a, 0x92, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6, 0x80, 0x00, 0x12, 0x28,
- 0x80, 0x00, 0xc8, 0x68, 0x82, 0x00, 0x02, 0x66, 0x80, 0x00, 0x12, 0x28,
- 0x80, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x6b, 0x8a,
- 0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x4a, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28, 0x90, 0x00, 0xc8, 0x68,
- 0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x92, 0x11, 0x29, 0xca,
- 0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a, 0x82, 0x00, 0xc8, 0x6a,
- 0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc8, 0x68,
- 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a, 0x82, 0x00, 0x02, 0x76,
- 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a, 0x02, 0x90, 0x02, 0xf6,
- 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a, 0x02, 0x00, 0x02, 0x76,
- 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x10, 0x02, 0xe4,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a, 0x02, 0x90, 0x02, 0xf6,
- 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76,
- 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca, 0x02, 0x90, 0x02, 0xf6,
- 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
- 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x95, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a,
- 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0x10, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xef, 0xca,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca, 0x02, 0x90, 0x02, 0xf6,
- 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x01, 0x8d, 0xae, 0xc8,
- 0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8, 0x00, 0x02, 0x10, 0x88,
- 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca, 0x02, 0x90, 0x02, 0xf6,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66,
- 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8, 0x00, 0x01, 0x0c, 0x88,
- 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a, 0x02, 0x90, 0x02, 0xf6,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6,
- 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a,
- 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x1b, 0x10, 0x90, 0x19, 0x2e, 0x28,
- 0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64, 0x00, 0x00, 0x20, 0x00,
- 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
- 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x01, 0x8f, 0xbd, 0x88,
- 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x0a, 0x28,
- 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a,
- 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x9c, 0x88,
- 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8, 0x00, 0x02, 0x17, 0x88,
- 0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
- 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x01, 0x82, 0x42, 0x64,
- 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x00, 0x00,
- 0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa, 0x02, 0x00, 0x02, 0x76,
- 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58, 0x03, 0x00, 0x10, 0x2a,
- 0x02, 0x04, 0x03, 0xe2, 0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a,
- 0x00, 0x94, 0x03, 0xa2, 0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x01,
- 0x00, 0x00, 0x00, 0x00, 0x02, 0x98, 0x56, 0x15, 0x00, 0x90, 0x4a, 0x58,
- 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59, 0x00, 0x00, 0x06, 0x12,
- 0x00, 0x90, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9,
- 0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1,
- 0x20, 0x00, 0x02, 0x13, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x10, 0x6c, 0xe1,
- 0x00, 0x94, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x14, 0xa3, 0x9c, 0x0f, 0xf9,
- 0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59,
- 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0,
- 0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59,
- 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0,
- 0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59,
- 0x01, 0x20, 0x01, 0xa0, 0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1,
- 0xa3, 0x9c, 0x0f, 0xf8, 0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0,
- 0xa3, 0x9c, 0x0f, 0xf8, 0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8,
- 0x02, 0x00, 0xc8, 0x6b, 0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4,
- 0x02, 0x00, 0x0e, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x03, 0x90, 0x02, 0xf4,
- 0x00, 0x00, 0x10, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x03, 0x80, 0x02, 0x74,
- 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x2f, 0x58,
- 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6,
- 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66,
- 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x92, 0x00, 0x12, 0x2a, 0x92, 0x00, 0xc6, 0x6a, 0x92, 0x90, 0x02, 0xe6,
- 0x00, 0x00, 0x60, 0x00, 0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6,
- 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x82, 0x00, 0x02, 0x66,
- 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x82, 0x11, 0x6b, 0x8a, 0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x95, 0x4a, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28,
- 0x90, 0x00, 0xc6, 0x68, 0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
- 0x92, 0x11, 0x29, 0xca, 0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a,
- 0x82, 0x00, 0xc6, 0x6a, 0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28,
- 0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a,
- 0x82, 0x00, 0x02, 0x76, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca,
- 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a,
- 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca,
- 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66,
- 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x96, 0x95, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
- 0x02, 0x11, 0xef, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x01, 0x8d, 0xae, 0xc8, 0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66,
- 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8,
- 0x00, 0x02, 0x10, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca,
- 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6,
- 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8,
- 0x00, 0x01, 0x0c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca,
- 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a,
- 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
- 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6,
- 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x19, 0x90,
- 0x90, 0x19, 0x2e, 0x28, 0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64,
- 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28,
- 0x01, 0x8f, 0xbd, 0x88, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x74,
- 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64,
- 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
- 0x00, 0x03, 0x9c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8,
- 0x00, 0x02, 0x17, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x82, 0x22, 0x64, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68,
- 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58,
- 0x03, 0x00, 0x10, 0x2a, 0x02, 0x04, 0x03, 0xe3, 0x00, 0x00, 0x00, 0x00,
- 0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a, 0x00, 0x94, 0x03, 0xa2,
- 0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x00, 0x02, 0x98, 0x56, 0x15,
- 0x00, 0x90, 0x2a, 0x58, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59,
- 0x00, 0x00, 0x04, 0x12, 0x00, 0x90, 0x2a, 0x59, 0x02, 0x98, 0x56, 0x14,
- 0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9,
- 0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1,
- 0x20, 0x00, 0x00, 0x12, 0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x94, 0x2a, 0x59,
- 0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
- 0xa3, 0x9c, 0x0f, 0xf9, 0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14,
- 0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x2a, 0x59,
- 0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x00, 0x00, 0x00, 0xa3, 0x9c, 0x0f, 0xf9,
- 0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0,
- 0x00, 0x94, 0x2a, 0x59, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf9,
- 0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0,
- 0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1, 0xa3, 0x9c, 0x0f, 0xf8,
- 0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf8,
- 0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8, 0x02, 0x00, 0xc6, 0x6b,
- 0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0e, 0x2a,
- 0x02, 0x00, 0xc6, 0x6a, 0x03, 0x90, 0x02, 0xf4, 0x00, 0x00, 0x10, 0x28,
- 0x00, 0x00, 0xc6, 0x68, 0x03, 0x80, 0x02, 0x74, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc0, 0x69,
- 0x02, 0x00, 0x10, 0x2a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x01, 0xbc, 0x54, 0xf6, 0x02, 0x04, 0x03, 0xe2,
- 0x02, 0x13, 0xcf, 0x5a, 0x00, 0x90, 0x03, 0xa2, 0x02, 0x18, 0x50, 0x2a,
- 0x02, 0x00, 0x00, 0x6a, 0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x30, 0x2a,
- 0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x17, 0xb4, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x3c, 0x2a,
- 0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x29,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x69, 0x02, 0x00, 0x10, 0x2a,
- 0x02, 0x00, 0x02, 0x76, 0x00, 0x14, 0x4e, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x52, 0x2a, 0x01, 0x80, 0x00, 0x6a,
- 0x00, 0x00, 0x40, 0x00, 0x00, 0x11, 0x94, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x5e, 0x2a, 0x01, 0x80, 0x00, 0x6a,
- 0x00, 0x00, 0x40, 0x00, 0x02, 0x11, 0x4c, 0x2a, 0x02, 0x00, 0x00, 0x6a,
- 0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x6c, 0x2a, 0x01, 0x80, 0x00, 0x6a,
- 0x02, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x20, 0x00, 0x00, 0x11, 0x4c, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x7a, 0x2a,
- 0x01, 0x80, 0x00, 0x6a, 0x02, 0x00, 0x00, 0xa8, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x04, 0x03, 0xe2, 0x00, 0x12, 0x00, 0x28, 0x02, 0x00, 0x9f, 0xfa,
- 0x00, 0x90, 0x03, 0xa2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
- 0x01, 0xbc, 0x52, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x07, 0xae, 0xfe, 0x2a, 0x07, 0x80, 0x00, 0x6a,
- 0x00, 0x10, 0x00, 0x28, 0x02, 0x80, 0x13, 0xa2, 0x0f, 0xff, 0xe3, 0x12,
- 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x30, 0x28,
- 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x20, 0x90,
- 0x01, 0x04, 0x2a, 0x58, 0x00, 0x00, 0x60, 0x00, 0xa0, 0x00, 0x0a, 0x10,
- 0x00, 0x00, 0x80, 0x00, 0x02, 0x00, 0x00, 0xfa, 0x02, 0x00, 0xc0, 0x6a,
- 0x02, 0x90, 0x02, 0xe6, 0x03, 0x00, 0x08, 0x2a, 0x00, 0x00, 0x40, 0x00,
- 0x02, 0x94, 0xcd, 0xfa, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x00, 0xf8,
- 0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
- 0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74, 0x0f, 0xff, 0xfa, 0x90,
- 0x00, 0x00, 0x80, 0x00, 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb,
- 0x01, 0x80, 0x00, 0xf8, 0x01, 0x90, 0x02, 0xf4, 0x02, 0x60, 0x80, 0x2a,
- 0x02, 0x00, 0xdb, 0xeb, 0x02, 0x00, 0x04, 0x28, 0x02, 0x10, 0x02, 0xf4,
- 0x02, 0x00, 0x22, 0x66, 0x02, 0x60, 0x88, 0x28, 0x02, 0x00, 0xdb, 0xe8,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76, 0x02, 0x80, 0x42, 0x66,
- 0x02, 0x60, 0x8a, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0xc2, 0x66, 0x02, 0x60, 0x92, 0x28,
- 0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76,
- 0x02, 0x80, 0x62, 0x66, 0x02, 0x60, 0x8c, 0x2a, 0x02, 0x00, 0xdb, 0xea,
- 0x00, 0x00, 0x20, 0x00, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x82, 0x66,
- 0x02, 0x60, 0x8e, 0x28, 0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00,
- 0x02, 0x10, 0x02, 0x76, 0x00, 0x00, 0xa2, 0x64, 0x02, 0x60, 0x90, 0x2a,
- 0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00, 0x00, 0x10, 0x02, 0xf4,
- 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x01, 0x90, 0x02, 0xf4,
- 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb, 0x00, 0x00, 0x00, 0xa8,
- 0x00, 0x10, 0x02, 0xf4, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x19, 0x2a, 0x2a,
- 0x02, 0x84, 0x20, 0xfb, 0x02, 0x00, 0x00, 0x6a, 0x02, 0x90, 0x02, 0xf6,
- 0x02, 0x98, 0xe0, 0x2a, 0x02, 0x19, 0x2c, 0x2a, 0x02, 0x00, 0x00, 0x6b,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x29, 0x02, 0x80, 0x00, 0x6a,
- 0x03, 0x94, 0x10, 0x59, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x12, 0xaa,
- 0x00, 0x80, 0x00, 0xa8, 0x04, 0x08, 0x00, 0x28, 0x04, 0x00, 0x00, 0x68,
- 0x20, 0x03, 0xe0, 0x5b, 0x90, 0x14, 0x02, 0x64, 0x20, 0x00, 0x00, 0x12,
- 0x93, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x00, 0x00, 0x03, 0x20, 0x02, 0x65,
- 0x02, 0x19, 0x2a, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x79,
- 0x01, 0xa0, 0x36, 0x65, 0x02, 0x00, 0x00, 0x68, 0x80, 0x87, 0xe0, 0x59,
- 0x90, 0x14, 0x02, 0x75, 0x02, 0x90, 0x01, 0xa0, 0x00, 0x14, 0x02, 0x64,
- 0x00, 0x00, 0x40, 0x00, 0x03, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x60, 0x78,
- 0x00, 0x14, 0x02, 0x74, 0x00, 0x19, 0x2a, 0x28, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x18, 0xe0, 0x29, 0x00, 0x00, 0x02, 0x66, 0x00, 0x00, 0x00, 0x68,
- 0x00, 0x00, 0x40, 0x00, 0x31, 0x80, 0x80, 0x59, 0x32, 0x19, 0x2e, 0x2a,
- 0x32, 0x00, 0x00, 0x6a, 0x31, 0x90, 0x02, 0xf4, 0x30, 0x02, 0x9d, 0x41,
- 0x32, 0x19, 0x30, 0x2a, 0x32, 0x00, 0x00, 0x6a, 0x30, 0x10, 0x02, 0xf4,
- 0x30, 0x00, 0x09, 0x12, 0x00, 0x00, 0x80, 0x00, 0x02, 0x80, 0x00, 0xfa,
- 0x02, 0x80, 0xc0, 0x6a, 0x03, 0x14, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a,
- 0x00, 0x00, 0x40, 0x00, 0x02, 0x18, 0x8d, 0xfa, 0x02, 0x14, 0x02, 0xf6,
- 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64,
- 0x00, 0x00, 0x60, 0x00, 0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74,
- 0x0f, 0xff, 0xf9, 0x90, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62,
- 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static int load_bootstrap(void)
-{
- const u8 *s = bootstrap_rbin;
- u32 l = sizeof(bootstrap_rbin);
- const u8 *data, *hdr, *h;
- u32 chksum, chksum2;
- int i, j, rangenr;
- u32 start, length;
-
- if (l < 12) {
- printf("bootstrap image corrupted. (too short header)\n");
- return -1;
- }
-
- chksum = ((u32)s[4] << 24) | ((u32)s[5] << 16) | ((u32)s[ 6] << 8) | (u32)s[ 7];
- rangenr = ((u32)s[8] << 24) | ((u32)s[9] << 16) | ((u32)s[10] << 8) | (u32)s[11];
- s += 12; l -= 12;
-
- hdr = s;
- s += 8 * rangenr; l -= 8 * rangenr;
- data = s;
-
- /* validate bootstrap image */
- h = hdr; s = data; chksum2 = 0;
- for (i = 0; i < rangenr; i++) {
- start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3];
- length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7];
- h += 8;
-
- /* too short */
- if (l < length) {
- printf("bootstrap image corrupted. (too short data)\n");
- return -1;
- }
- l -= length;
-
- j = (int)length / 4;
- while (j-- > 0) {
- chksum2 += ((u32)s[0] << 24) | ((u32)s[1] << 16) | ((u32)s[2] << 8) | (u32)s[3];
- s += 4;
- }
- }
-
- /* checksum must match */
- if (chksum != chksum2) {
- printf("bootstrap image corrupted. (checksum error)\n");
- return -1;
- }
-
- /* nothing must be left */
- if (l != 0) {
- printf("bootstrap image corrupted. (garbage at the end)\n");
- return -1;
- }
-
- /* write the image */
- h = hdr;
- s = data;
- for (i = 0; i < rangenr; i++) {
- start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3];
- length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7];
- h += 8;
- c62_write(start, (u32 *)s, length / 4);
- s += length;
- }
-
- /* and now validate checksum */
- h = hdr;
- s = data;
- chksum2 = 0;
- for (i = 0; i < rangenr; i++) {
- start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3];
- length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7];
- h += 8;
- chksum2 += c62_checksum(start, length / 4);
- s += length;
- }
-
- /* checksum must match */
- if (chksum != chksum2) {
- printf("bootstrap in DSP memory is corrupted\n");
- return -1;
- }
-
- return 0;
-}
-
-struct host_init {
- u32 master_mode;
- struct {
- u8 port_id;
- u8 slot_id;
- } ch_serial_map[32];
- u32 clk_divider[2];
- /* pll */
- u32 initmode;
- u32 pllm;
- u32 div[4];
- u32 oscdiv1;
- u32 unused[10];
-};
-
-const struct host_init hi_default = {
- .master_mode =
-#if !defined(CONFIG_NETTA_ISDN)
- -1,
-#else
- 0,
-#endif
-
- .ch_serial_map = {
- [ 0] = { .port_id = 2, .slot_id = 16 },
- [ 1] = { .port_id = 2, .slot_id = 17 },
- [ 2] = { .port_id = 2, .slot_id = 18 },
- [ 3] = { .port_id = 2, .slot_id = 19 },
- [ 4] = { .port_id = 2, .slot_id = 20 },
- [ 5] = { .port_id = 2, .slot_id = 21 },
- [ 6] = { .port_id = 2, .slot_id = 22 },
- [ 7] = { .port_id = 2, .slot_id = 23 },
- [ 8] = { .port_id = 2, .slot_id = 24 },
- [ 9] = { .port_id = 2, .slot_id = 25 },
- [10] = { .port_id = 2, .slot_id = 26 },
- [11] = { .port_id = 2, .slot_id = 27 },
- [12] = { .port_id = 2, .slot_id = 28 },
- [13] = { .port_id = 2, .slot_id = 29 },
- [14] = { .port_id = 2, .slot_id = 30 },
- [15] = { .port_id = 2, .slot_id = 31 },
- },
-
- /*
- dsp_clk(xin, pllm) = xin * pllm
- serial_clk(xin, pllm, div) = (dsp_clk(xin, pllm) / 2) / (div + 1)
- */
-
- .clk_divider = {
- [0] = 47, /* must be 2048Hz */
- [1] = 47,
- },
-
- .initmode = 1,
- .pllm =
-#if !defined(CONFIG_NETTA_ISDN)
- 8, /* for =~ 25MHz 8 */
-#else
- 4,
-#endif
- .div = {
- [0] = 0x8000,
- [1] = 0x8000, /* for =~ 25MHz 0x8000 */
- [2] = 0x8001, /* for =~ 25MHz 0x8001 */
- [3] = 0x8001, /* for =~ 25MHz 0x8001 */
- },
-
- .oscdiv1 = 0,
-};
-
-static void hi_write(const struct host_init *hi)
-{
- u32 hi_buf[1 + sizeof(*hi) / sizeof(u32)];
- u32 *s;
- u32 chksum;
- int i;
-
- memset(hi_buf, 0, sizeof(hi_buf));
-
- s = hi_buf;
- s++;
- *s++ = hi->master_mode;
- for (i = 0; i < (sizeof(hi->ch_serial_map) / sizeof(hi->ch_serial_map[0])) / 2; i++)
- *s++ = ((u32)hi->ch_serial_map[i * 2 + 1].slot_id << 24) | ((u32)hi->ch_serial_map[i * 2 + 1].port_id << 16) |
- ((u32)hi->ch_serial_map[i * 2 + 0].slot_id << 8) | (u32)hi->ch_serial_map[i * 2 + 0].port_id;
-
- for (i = 0; i < sizeof(hi->clk_divider)/sizeof(hi->clk_divider[0]); i++)
- *s++ = hi->clk_divider[i];
-
- *s++ = hi->initmode;
- *s++ = hi->pllm;
- for (i = 0; i < sizeof(hi->div)/sizeof(hi->div[0]); i++)
- *s++ = hi->div[i];
- *s++ = hi->oscdiv1;
-
- chksum = 0;
- for (i = 1; i < sizeof(hi_buf)/sizeof(hi_buf[0]); i++)
- chksum += hi_buf[i];
- hi_buf[0] = -chksum;
-
- c62_write(0x1000, hi_buf, sizeof(hi_buf) / sizeof(hi_buf[0]));
-}
-
-static void run_bootstrap(void)
-{
- dsp_go_slow();
-
- hi_write(&hi_default);
-
- /* signal interrupt */
- dsp_write_hpic(0x0002);
- dsp_delay();
-
- dsp_go_fast();
-}
-
-#endif
-
-/***********************************************************************************************************/
-
-int board_post_dsp(int flags)
-{
- u32 ramS, ramE;
- u32 data, data2;
- int i, j, k;
-#if !defined(CONFIG_NETTA_6412)
- int r;
-#endif
- dsp_reset();
- dsp_init_hpic();
-#if !defined(CONFIG_NETTA_6412)
- dsp_go_slow();
-#endif
- data = 0x11223344;
- dsp_write_hpic_word(DSP_HPIA, data);
- data2 = dsp_read_hpic_word(DSP_HPIA);
- if (data2 != 0x11223344) {
- printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2);
- goto err;
- }
-
- data = 0xFFEEDDCC;
- dsp_write_hpic_word(DSP_HPIA, data);
- data2 = dsp_read_hpic_word(DSP_HPIA);
- if (data2 != 0xFFEEDDCC) {
- printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2);
- goto err;
- }
-#if defined(CONFIG_NETTA_6412)
- dsp_dram_initialize();
-#else
- r = load_bootstrap();
- if (r < 0) {
- printf("BOOTSTRAP: ** ERROR ** failed to load\n");
- goto err;
- }
-
- run_bootstrap();
-
- dsp_go_fast();
-#endif
- printf(" ");
-
- /* test RAMs */
- for (k = 0; k < sizeof(ranges)/sizeof(ranges[0]); k++) {
-
- ramS = ranges[k].start;
- ramE = ranges[k].start + ranges[k].size;
-
- for (j = 0; j < 3; j++) {
-
- printf("\b\b\b\bR%d.%d", k, j);
-
- for (i = ramS; i < ramE; i += 4) {
-
- data = 0;
- switch (j) {
- case 0: data = 0xAA55AA55; break;
- case 1: data = 0x55AA55AA; break;
- case 2: data = (u32)i; break;
- }
-
- c62_write_word(i, data);
- data2 = c62_read_word(i);
- if (data != data2) {
- printf(" ** ERROR at 0x%08X; wrote 0x%08X read 0x%08X **\n", i, data, data2);
- goto err;
- }
- }
- }
- }
-
- printf("\b\b\b\b \b\b\b\bOK\n");
-#if !defined(CONFIG_NETTA_6412)
- /* XXX assume that this works */
- load_bootstrap();
- run_bootstrap();
- dsp_go_fast();
-#endif
- return 0;
-
-err:
- return -1;
-}
-
-int board_dsp_reset(void)
-{
-#if !defined(CONFIG_NETTA_6412)
- int r;
-#endif
- dsp_reset();
- dsp_init_hpic();
-#if defined(CONFIG_NETTA_6412)
- dsp_dram_initialize();
-#else
- dsp_go_slow();
- r = load_bootstrap();
- if (r < 0)
- return r;
-
- run_bootstrap();
- dsp_go_fast();
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size << 20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_MX:
- printf("MXIC ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
- short i;
- uchar mid;
- uchar pid;
- vu_char *caddr = (vu_char *) addr;
- ulong base = (ulong) addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0x90;
-
- mid = caddr[0];
- switch (mid) {
- case (AMD_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (MX_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_MX;
- break;
- case (STM_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- pid = caddr[1]; /* device ID */
- switch (pid) {
- case (AMD_ID_LV400T & 0xFF):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV400B & 0xFF):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV800T & 0xFF):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800B & 0xFF):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV160T & 0xFF):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160B & 0xFF):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
- case (STM_ID_M29W040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & 0xFF):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV320B & 0xFF):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf(" ");
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection: D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (vu_char *) info->start[0];
-
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0xF0;
-
- udelay(20000);
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0x80;
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_char *) (info->start[sect]);
- addr[0] = 0x30;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer(0);
- last = start;
- addr = (vu_char *) (info->start[l_sect]);
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (vu_char *) info->start[0];
- addr[0] = 0xF0; /* reset bank */
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
-
- while (cnt > 0) {
- if ((rc = write_byte(info, addr++, *src++)) != 0) {
- return (rc);
- }
- --cnt;
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *) dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0xA0;
-
- *((vu_char *) dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b) (1U << (31-(_b)))
-#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b) (1U << (15-(_b)))
-#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b) (1U << (7-(_b)))
-#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b) _BD(_b)
-#define _BR(_l, _h) _BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
- printf ("Intracom NETTA"
-#if defined(CONFIG_NETTA_ISDN)
- " with ISDN support"
-#endif
-#if defined(CONFIG_NETTA_6412)
- " (DSP:TI6412)"
-#else
- " (DSP:TI6711)"
-#endif
- "\n"
- );
- return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000 0x00000000
-#define CS_0001 0x10000000
-#define CS_0010 0x20000000
-#define CS_0011 0x30000000
-#define CS_0100 0x40000000
-#define CS_0101 0x50000000
-#define CS_0110 0x60000000
-#define CS_0111 0x70000000
-#define CS_1000 0x80000000
-#define CS_1001 0x90000000
-#define CS_1010 0xA0000000
-#define CS_1011 0xB0000000
-#define CS_1100 0xC0000000
-#define CS_1101 0xD0000000
-#define CS_1110 0xE0000000
-#define CS_1111 0xF0000000
-
-#define BS_0000 0x00000000
-#define BS_0001 0x01000000
-#define BS_0010 0x02000000
-#define BS_0011 0x03000000
-#define BS_0100 0x04000000
-#define BS_0101 0x05000000
-#define BS_0110 0x06000000
-#define BS_0111 0x07000000
-#define BS_1000 0x08000000
-#define BS_1001 0x09000000
-#define BS_1010 0x0A000000
-#define BS_1011 0x0B000000
-#define BS_1100 0x0C000000
-#define BS_1101 0x0D000000
-#define BS_1110 0x0E000000
-#define BS_1111 0x0F000000
-
-#define A10_AAAA 0x00000000
-#define A10_AAA0 0x00200000
-#define A10_AAA1 0x00300000
-#define A10_000A 0x00800000
-#define A10_0000 0x00A00000
-#define A10_0001 0x00B00000
-#define A10_111A 0x00C00000
-#define A10_1110 0x00E00000
-#define A10_1111 0x00F00000
-
-#define RAS_0000 0x00000000
-#define RAS_0001 0x00040000
-#define RAS_1110 0x00080000
-#define RAS_1111 0x000C0000
-
-#define CAS_0000 0x00000000
-#define CAS_0001 0x00010000
-#define CAS_1110 0x00020000
-#define CAS_1111 0x00030000
-
-#define WE_0000 0x00000000
-#define WE_0001 0x00004000
-#define WE_1110 0x00008000
-#define WE_1111 0x0000C000
-
-#define GPL4_0000 0x00000000
-#define GPL4_0001 0x00001000
-#define GPL4_1110 0x00002000
-#define GPL4_1111 0x00003000
-
-#define GPL5_0000 0x00000000
-#define GPL5_0001 0x00000400
-#define GPL5_1110 0x00000800
-#define GPL5_1111 0x00000C00
-#define LOOP 0x00000080
-
-#define EXEN 0x00000040
-
-#define AMX_COL 0x00000000
-#define AMX_ROW 0x00000020
-#define AMX_MAR 0x00000030
-
-#define NA 0x00000008
-
-#define UTA 0x00000004
-
-#define TODT 0x00000002
-
-#define LAST 0x00000001
-
-/* #define CAS_LATENCY 3 */
-#define CAS_LATENCY 2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
-#endif
-
- /* UPT */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
- CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
- unsigned int i, j, v, vv;
- volatile unsigned int *p;
- unsigned int pv;
-
- p = (unsigned int *)addr;
- pv = (unsigned int)p;
- for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
- *p++ = pv;
-
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- v = (unsigned int)p;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- p++;
- }
-
- for (j = 0; j < 5; j++) {
- switch (j) {
- case 0: v = 0x00000000; break;
- case 1: v = 0xffffffff; break;
- case 2: v = 0x55555555; break;
- case 3: v = 0xaaaaaaaa; break;
- default:v = 0xdeadbeef; break;
- }
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- *p = v;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- *p = ~v;
- p++;
- }
- }
-}
-
-phys_size_t initdram(int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size;
-
- upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(uint));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
- memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
- memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */
-
- udelay(200);
-
- /* perform SDRAM initialisation sequence */
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/
- udelay(1);
-
- memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */
-
- udelay(10000);
-
- {
- u32 d1, d2;
-
- d1 = 0xAA55AA55;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
-
- d1 = 0x55AA55AA;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
- }
-
- size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
-#if 0
- printf("check 0\n");
- check_ram(( 0 << 20), (2 << 20));
- printf("check 16\n");
- check_ram((16 << 20), (2 << 20));
- printf("check 32\n");
- check_ram((32 << 20), (2 << 20));
- printf("check 48\n");
- check_ram((48 << 20), (2 << 20));
-#endif
-
- if (size == 0) {
- printf("SIZE is zero: LOOP on 0\n");
- for (;;) {
- *(volatile u32 *)0 = 0;
- (void)*(volatile u32 *)0;
- }
- }
-
- return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r(void)
-{
- return(0);
-}
-
-void reset_phys(void)
-{
- int phyno;
- unsigned short v;
-
- /* reset the damn phys */
- mii_init();
-
- for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
- if (v == 0xFFFF)
- continue;
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
- udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
- BMCR_RESET | BMCR_ANENABLE);
- udelay(10000);
- }
-}
-
-extern int board_dsp_reset(void);
-
-int last_stage_init(void)
-{
- int r;
-
- reset_phys();
- r = board_dsp_reset();
- if (r < 0)
- printf("*** WARNING *** DSP reset failed (run diagnostics)\n");
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK (_BWR(3) | _BWR(7, 9) | _BW(11))
-#define PA_GP_OUTMASK (_BW(6) | _BW(10) | _BWR(12, 15))
-#define PA_SP_MASK (_BWR(0, 2) | _BWR(4, 5))
-#define PA_ODR_VAL 0
-#define PA_GP_OUTVAL (_BW(13) | _BWR(14, 15))
-#define PA_SP_DIRVAL 0
-
-#define PB_GP_INMASK (_B(28) | _B(31))
-#define PB_GP_OUTMASK (_BR(15, 19) | _BR(26, 27) | _BR(29, 30))
-#define PB_SP_MASK (_BR(22, 25))
-#define PB_ODR_VAL 0
-#define PB_GP_OUTVAL (_BR(15, 19) | _BR(26, 27) | _BR(29, 31))
-#define PB_SP_DIRVAL 0
-
-#define PC_GP_INMASK (_BW(5) | _BW(7) | _BW(8) | _BWR(9, 11) | _BWR(13, 15))
-#define PC_GP_OUTMASK (_BW(6) | _BW(12))
-#define PC_SP_MASK (_BW(4) | _BW(8))
-#define PC_SOVAL 0
-#define PC_INTVAL _BW(7)
-#define PC_GP_OUTVAL (_BW(6) | _BW(12))
-#define PC_SP_DIRVAL 0
-
-#define PD_GP_INMASK 0
-#define PD_GP_OUTMASK _BWR(3, 15)
-#define PD_SP_MASK 0
-
-#if defined(CONFIG_NETTA_6412)
-
-#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11) | _BW(15))
-
-#else
-
-#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11))
-
-#endif
-
-#define PD_SP_DIRVAL 0
-
-int board_early_init_f(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *ioport = &immap->im_ioport;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /* CS1: NAND chip select */
- memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_SCY_2_CLK | OR_TRLX | OR_ACS_DIV2) ;
- memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#if !defined(CONFIG_NETTA_6412)
- /* CS2: DSP */
- memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
- memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-#else
- /* CS6: DSP */
- memctl->memc_or6 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
- memctl->memc_br6 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-#endif
- /* CS4: External register chip select */
- memctl->memc_or4 = ((0xFFFFFFFFLU & ~(ER_SIZE - 1)) | OR_BI | OR_SCY_4_CLK);
- memctl->memc_br4 = ((ER_BASE & BR_BA_MSK) | BR_PS_32 | BR_V);
-
- /* CS5: dummy for accurate delay */
- memctl->memc_or5 = ((0xFFFFFFFFLU & ~(DUMMY_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_0_CLK | OR_ACS_DIV2);
- memctl->memc_br5 = ((DUMMY_BASE & BR_BA_MSK) | BR_PS_32 | BR_V);
-
- ioport->iop_padat = PA_GP_OUTVAL;
- ioport->iop_paodr = PA_ODR_VAL;
- ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL;
- ioport->iop_papar = PA_SP_MASK;
-
- cpm->cp_pbdat = PB_GP_OUTVAL;
- cpm->cp_pbodr = PB_ODR_VAL;
- cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL;
- cpm->cp_pbpar = PB_SP_MASK;
-
- ioport->iop_pcdat = PC_GP_OUTVAL;
- ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL;
- ioport->iop_pcso = PC_SOVAL;
- ioport->iop_pcint = PC_INTVAL;
- ioport->iop_pcpar = PC_SP_MASK;
-
- ioport->iop_pddat = PD_GP_OUTVAL;
- ioport->iop_pddir = PD_GP_OUTMASK | PD_SP_DIRVAL;
- ioport->iop_pdpar = PD_SP_MASK;
-
- /* ioport->iop_pddat |= (1 << (15 - 6)) | (1 << (15 - 7)); */
-
- return 0;
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-int pcmcia_init(void)
-{
- return 0;
-}
-
-#endif
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
- /* XXX add here the really funky stuff */
-}
-
-#endif
+++ /dev/null
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-/* some sane bit macros */
-#define _BD(_b) (1U << (31-(_b)))
-#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b) (1U << (15-(_b)))
-#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b) (1U << (7-(_b)))
-#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b) _BD(_b)
-#define _BR(_l, _h) _BDR(_l, _h)
-
-#define PCMCIA_BOARD_MSG "NETTA"
-
-static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
-
-static void cfg_vppd(int no)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
- return;
-
- mask = vppd_masks[no];
-
- immap->im_ioport.iop_papar &= ~mask;
- immap->im_ioport.iop_paodr &= ~mask;
- immap->im_ioport.iop_padir |= mask;
-}
-
-static void set_vppd(int no, int what)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
- return;
-
- mask = vppd_masks[no];
-
- if (what)
- immap->im_ioport.iop_padat |= mask;
- else
- immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
-
-static void cfg_vccd(int no)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
- return;
-
- mask = vccd_masks[no];
-
- immap->im_ioport.iop_papar &= ~mask;
- immap->im_ioport.iop_paodr &= ~mask;
- immap->im_ioport.iop_padir |= mask;
-}
-
-static void set_vccd(int no, int what)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
- return;
-
- mask = vccd_masks[no];
-
- if (what)
- immap->im_ioport.iop_padat |= mask;
- else
- immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short oc_mask = _BW(8);
-
-static void cfg_oc(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask = oc_mask;
-
- immap->im_ioport.iop_pcdir &= ~mask;
- immap->im_ioport.iop_pcso &= ~mask;
- immap->im_ioport.iop_pcint &= ~mask;
- immap->im_ioport.iop_pcpar &= ~mask;
-}
-
-static int get_oc(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask = oc_mask;
- int what;
-
- what = !!(immap->im_ioport.iop_pcdat & mask);;
- return what;
-}
-
-static const unsigned short shdn_mask = _BW(12);
-
-static void cfg_shdn(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- mask = shdn_mask;
-
- immap->im_ioport.iop_papar &= ~mask;
- immap->im_ioport.iop_paodr &= ~mask;
- immap->im_ioport.iop_padir |= mask;
-}
-
-static void set_shdn(int what)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- unsigned short mask;
-
- mask = shdn_mask;
-
- if (what)
- immap->im_ioport.iop_padat |= mask;
- else
- immap->im_ioport.iop_padat &= ~mask;
-}
-
-static void cfg_ports (void)
-{
- cfg_vppd(0); cfg_vppd(1); /* VPPD0,VPPD1 VAVPP => Hi-Z */
- cfg_vccd(0); cfg_vccd(1); /* 3V and 5V off */
- cfg_shdn();
- cfg_oc();
-
- /*
- * Configure Port A for TPS2211 PC-Card Power-Interface Switch
- *
- * Switch off all voltages, assert shutdown
- */
- set_vppd(0, 1); set_vppd(1, 1);
- set_vccd(0, 0); set_vccd(1, 0);
- set_shdn(1);
-
- udelay(100000);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
- volatile pcmconf8xx_t *pcmp;
- uint reg, pipr, mask;
- int i;
-
- debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- udelay(10000);
-
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
- cfg_ports ();
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
- printf (" No Card found\n");
- return (1);
- }
-
- /*
- * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
- */
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- pipr = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- pipr,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
-
- if ((pipr & mask) == mask) {
- set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
- set_vccd(0, 0); set_vccd(1, 1); /* 5V on, 3V off */
- puts (" 5.0V card found: ");
- } else {
- set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
- set_vccd(0, 1); set_vccd(1, 0); /* 5V off, 3V on */
- puts (" 3.3V card found: ");
- }
-
- /* Wait 500 ms; use this to check for over-current */
- for (i=0; i<5000; ++i) {
- if (!get_oc()) {
- printf (" *** Overcurrent - Safety shutdown ***\n");
- set_vccd(0, 0); set_vccd(1, 0); /* VAVPP => Hi-Z */
- return (1);
- }
- udelay (100);
- }
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- u_long reg;
-
- debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- /* Configure PCMCIA General Control Register */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- /* All voltages off / Hi-Z */
- set_vppd(0, 1); set_vppd(1, 1);
- set_vccd(0, 1); set_vccd(1, 1);
-
- udelay(10000);
-
- return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("voltage_set: "
- PCMCIA_BOARD_MSG
- " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
- 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Configure Port C pins for
- * 5 Volts Enable and 3 Volts enable,
- * Turn all power pins to Hi-Z
- */
- debug ("PCMCIA power OFF\n");
- cfg_ports (); /* Enables switch, but all in Hi-Z */
-
- set_vppd(0, 1); set_vppd(1, 1);
-
- switch(vcc) {
- case 0:
- break; /* Switch off */
-
- case 33:
- set_vccd(0, 1); set_vccd(1, 0);
- break;
-
- case 50:
- set_vccd(0, 0); set_vccd(1, 1);
- break;
-
- default:
- goto done;
- }
-
- /* Checking supported voltages */
-
- debug ("PIPR: 0x%x --> %s\n",
- pcmp->pcmc_pipr,
- (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-done:
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
- slot+'A');
- return (0);
-}
-
-#endif /* CONFIG_PCMCIA */
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = netta2.o flash.o
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size << 20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_MX:
- printf("MXIC ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
- short i;
- uchar mid;
- uchar pid;
- vu_char *caddr = (vu_char *) addr;
- ulong base = (ulong) addr;
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0x90;
-
- mid = caddr[0];
- switch (mid) {
- case (AMD_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (MX_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_MX;
- break;
- case (STM_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- pid = caddr[1]; /* device ID */
- switch (pid) {
- case (AMD_ID_LV400T & 0xFF):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV400B & 0xFF):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV800T & 0xFF):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800B & 0xFF):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV160T & 0xFF):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160B & 0xFF):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
- case (STM_ID_M29W040B & 0xFF):
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break;
-
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & 0xFF):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV320B & 0xFF):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf(" ");
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection: D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (vu_char *) info->start[0];
-
- caddr[0x0555] = 0xAA;
- caddr[0x02AA] = 0x55;
- caddr[0x0555] = 0xF0;
-
- udelay(20000);
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0x80;
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_char *) (info->start[sect]);
- addr[0] = 0x30;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer(0);
- last = start;
- addr = (vu_char *) (info->start[l_sect]);
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (vu_char *) info->start[0];
- addr[0] = 0xF0; /* reset bank */
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
-
- while (cnt > 0) {
- if ((rc = write_byte(info, addr++, *src++)) != 0) {
- return (rc);
- }
- --cnt;
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char *) (info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *) dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAA;
- addr[0x02AA] = 0x55;
- addr[0x0555] = 0xA0;
-
- *((vu_char *) dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b) (1U << (31-(_b)))
-#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b) (1U << (15-(_b)))
-#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b) (1U << (7-(_b)))
-#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b) _BD(_b)
-#define _BR(_l, _h) _BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
- printf ("Intracom NetTA2 V%d\n", CONFIG_NETTA2_VERSION);
- return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000 0x00000000
-#define CS_0001 0x10000000
-#define CS_0010 0x20000000
-#define CS_0011 0x30000000
-#define CS_0100 0x40000000
-#define CS_0101 0x50000000
-#define CS_0110 0x60000000
-#define CS_0111 0x70000000
-#define CS_1000 0x80000000
-#define CS_1001 0x90000000
-#define CS_1010 0xA0000000
-#define CS_1011 0xB0000000
-#define CS_1100 0xC0000000
-#define CS_1101 0xD0000000
-#define CS_1110 0xE0000000
-#define CS_1111 0xF0000000
-
-#define BS_0000 0x00000000
-#define BS_0001 0x01000000
-#define BS_0010 0x02000000
-#define BS_0011 0x03000000
-#define BS_0100 0x04000000
-#define BS_0101 0x05000000
-#define BS_0110 0x06000000
-#define BS_0111 0x07000000
-#define BS_1000 0x08000000
-#define BS_1001 0x09000000
-#define BS_1010 0x0A000000
-#define BS_1011 0x0B000000
-#define BS_1100 0x0C000000
-#define BS_1101 0x0D000000
-#define BS_1110 0x0E000000
-#define BS_1111 0x0F000000
-
-#define GPL0_AAAA 0x00000000
-#define GPL0_AAA0 0x00200000
-#define GPL0_AAA1 0x00300000
-#define GPL0_000A 0x00800000
-#define GPL0_0000 0x00A00000
-#define GPL0_0001 0x00B00000
-#define GPL0_111A 0x00C00000
-#define GPL0_1110 0x00E00000
-#define GPL0_1111 0x00F00000
-
-#define GPL1_0000 0x00000000
-#define GPL1_0001 0x00040000
-#define GPL1_1110 0x00080000
-#define GPL1_1111 0x000C0000
-
-#define GPL2_0000 0x00000000
-#define GPL2_0001 0x00010000
-#define GPL2_1110 0x00020000
-#define GPL2_1111 0x00030000
-
-#define GPL3_0000 0x00000000
-#define GPL3_0001 0x00004000
-#define GPL3_1110 0x00008000
-#define GPL3_1111 0x0000C000
-
-#define GPL4_0000 0x00000000
-#define GPL4_0001 0x00001000
-#define GPL4_1110 0x00002000
-#define GPL4_1111 0x00003000
-
-#define GPL5_0000 0x00000000
-#define GPL5_0001 0x00000400
-#define GPL5_1110 0x00000800
-#define GPL5_1111 0x00000C00
-#define LOOP 0x00000080
-
-#define EXEN 0x00000040
-
-#define AMX_COL 0x00000000
-#define AMX_ROW 0x00000020
-#define AMX_MAR 0x00000030
-
-#define NA 0x00000008
-
-#define UTA 0x00000004
-
-#define TODT 0x00000002
-
-#define LAST 0x00000001
-
-#define A10_AAAA GPL0_AAAA
-#define A10_AAA0 GPL0_AAA0
-#define A10_AAA1 GPL0_AAA1
-#define A10_000A GPL0_000A
-#define A10_0000 GPL0_0000
-#define A10_0001 GPL0_0001
-#define A10_111A GPL0_111A
-#define A10_1110 GPL0_1110
-#define A10_1111 GPL0_1111
-
-#define RAS_0000 GPL1_0000
-#define RAS_0001 GPL1_0001
-#define RAS_1110 GPL1_1110
-#define RAS_1111 GPL1_1111
-
-#define CAS_0000 GPL2_0000
-#define CAS_0001 GPL2_0001
-#define CAS_1110 GPL2_1110
-#define CAS_1111 GPL2_1111
-
-#define WE_0000 GPL3_0000
-#define WE_0001 GPL3_0001
-#define WE_1110 GPL3_1110
-#define WE_1111 GPL3_1111
-
-/* #define CAS_LATENCY 3 */
-#define CAS_LATENCY 2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
- /* RSS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* RBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_,
-
- /* WBS */
- CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
- CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
- CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
- CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
-#endif
-
- /* UPT */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */
- CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
- CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-#if CONFIG_NETTA2_VERSION == 2
-static const uint nandcs_table[0x40] = {
- /* RSS */
- CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
- CS_0000 | GPL4_0000 | GPL5_1111,
- CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */
-
- /* RBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* WSS */
- CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
- CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
- CS_0000 | GPL4_1111 | GPL5_1111,
- CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
- /* WBS */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* UPT */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* EXC */
- CS_0001 | LAST,
- _NOT_USED_,
-
- /* REG */
- CS_1110 ,
- CS_0001 | LAST,
-};
-#endif
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
- unsigned int i, j, v, vv;
- volatile unsigned int *p;
- unsigned int pv;
-
- p = (unsigned int *)addr;
- pv = (unsigned int)p;
- for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
- *p++ = pv;
-
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- v = (unsigned int)p;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- p++;
- }
-
- for (j = 0; j < 5; j++) {
- switch (j) {
- case 0: v = 0x00000000; break;
- case 1: v = 0xffffffff; break;
- case 2: v = 0x55555555; break;
- case 3: v = 0xaaaaaaaa; break;
- default:v = 0xdeadbeef; break;
- }
- p = (unsigned int *)addr;
- for (i = 0; i < size / sizeof(unsigned int); i++) {
- *p = v;
- vv = *p;
- if (vv != v) {
- printf("%p: read %08x instead of %08x\n", p, vv, v);
- hang();
- }
- *p = ~v;
- p++;
- }
- }
-}
-
-phys_size_t initdram(int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size;
-
- upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
- memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
- memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */
-
- udelay(200);
-
- /* perform SDRAM initialisation sequence */
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */
- udelay(1);
-
- memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/
- udelay(1);
-
- memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */
-
- udelay(10000);
-
- {
- u32 d1, d2;
-
- d1 = 0xAA55AA55;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
-
- d1 = 0x55AA55AA;
- *(volatile u32 *)0 = d1;
- d2 = *(volatile u32 *)0;
- if (d1 != d2) {
- printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
- hang();
- }
- }
-
- size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
- if (size == 0) {
- printf("SIZE is zero: LOOP on 0\n");
- for (;;) {
- *(volatile u32 *)0 = 0;
- (void)*(volatile u32 *)0;
- }
- }
-
- return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
- int phyno;
- unsigned short v;
-
- udelay(10000);
- /* reset the damn phys */
- mii_init();
-
- for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
- if (v == 0xFFFF)
- continue;
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
- udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
- BMCR_RESET | BMCR_ANENABLE);
- udelay(10000);
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK 0
-#define PA_GP_OUTMASK (_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15))
-#define PA_SP_MASK 0
-#define PA_ODR_VAL 0
-#define PA_GP_OUTVAL (_BW(3) | _BW(14) | _BW(15))
-#define PA_SP_DIRVAL 0
-
-#define PB_GP_INMASK _B(28)
-#define PB_GP_OUTMASK (_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_MASK (_BR(22, 25))
-#define PB_ODR_VAL 0
-#define PB_GP_OUTVAL (_B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_DIRVAL 0
-
-#if CONFIG_NETTA2_VERSION == 1
-#define PC_GP_INMASK _BW(12)
-#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(13) | _BW(15))
-#elif CONFIG_NETTA2_VERSION == 2
-#define PC_GP_INMASK (_BW(13) | _BW(15))
-#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(12))
-#endif
-#define PC_SP_MASK 0
-#define PC_SOVAL 0
-#define PC_INTVAL 0
-#define PC_GP_OUTVAL (_BW(10) | _BW(11))
-#define PC_SP_DIRVAL 0
-
-#if CONFIG_NETTA2_VERSION == 1
-#define PE_GP_INMASK _B(31)
-#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30))
-#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27) | _B(28))
-#elif CONFIG_NETTA2_VERSION == 2
-#define PE_GP_INMASK _BR(28, 31)
-#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27))
-#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27))
-#endif
-#define PE_SP_MASK 0
-#define PE_ODR_VAL 0
-#define PE_SP_DIRVAL 0
-
-int board_early_init_f(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *ioport = &immap->im_ioport;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /* NAND chip select */
-#if CONFIG_NETTA2_VERSION == 1
- memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX);
- memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#elif CONFIG_NETTA2_VERSION == 2
- upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
- memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
- memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA);
- memctl->memc_mamr = 0; /* all clear */
-#endif
-
- /* DSP chip select */
- memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX);
- memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-
-#if CONFIG_NETTA2_VERSION == 1
- memctl->memc_br4 &= ~BR_V;
-#endif
- memctl->memc_br5 &= ~BR_V;
- memctl->memc_br6 &= ~BR_V;
- memctl->memc_br7 &= ~BR_V;
-
- ioport->iop_padat = PA_GP_OUTVAL;
- ioport->iop_paodr = PA_ODR_VAL;
- ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL;
- ioport->iop_papar = PA_SP_MASK;
-
- cpm->cp_pbdat = PB_GP_OUTVAL;
- cpm->cp_pbodr = PB_ODR_VAL;
- cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL;
- cpm->cp_pbpar = PB_SP_MASK;
-
- ioport->iop_pcdat = PC_GP_OUTVAL;
- ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL;
- ioport->iop_pcso = PC_SOVAL;
- ioport->iop_pcint = PC_INTVAL;
- ioport->iop_pcpar = PC_SP_MASK;
-
- cpm->cp_pedat = PE_GP_OUTVAL;
- cpm->cp_peodr = PE_ODR_VAL;
- cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL;
- cpm->cp_pepar = PE_SP_MASK;
-
- return 0;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
- /* XXX add here the really funky stuff */
-}
-
-#endif
-
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
- /* printf("overwrite_console called\n"); */
- return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
- return 0;
-}
-
-int last_stage_init(void)
-{
-#if CONFIG_NETTA2_VERSION == 2
- int i;
-#endif
-
-#if CONFIG_NETTA2_VERSION == 2
- /* assert peripheral reset */
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
- for (i = 0; i < 10; i++)
- udelay(1000);
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |= _BW(12);
-#endif
- reset_phys();
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
Active powerpc mpc8xx - - ivm IVMS8 IVMS8:IVMS8_16M Wolfgang Denk <wd@denx.de>
Active powerpc mpc8xx - - ivm IVMS8_128 IVMS8:IVMS8_32M Wolfgang Denk <wd@denx.de>
Active powerpc mpc8xx - - ivm IVMS8_256 IVMS8:IVMS8_64M Wolfgang Denk <wd@denx.de>
-Active powerpc mpc8xx - - netphone NETPHONE NETPHONE:NETPHONE_VERSION=1 -
-Active powerpc mpc8xx - - netphone NETPHONE_V2 NETPHONE:NETPHONE_VERSION=2 -
-Active powerpc mpc8xx - - netta NETTA - -
-Active powerpc mpc8xx - - netta NETTA_6412 NETTA:NETTA_6412=1 -
-Active powerpc mpc8xx - - netta NETTA_6412_SWAPHOOK NETTA:NETTA_6412=1,NETTA_SWAPHOOK=1 -
-Active powerpc mpc8xx - - netta NETTA_ISDN NETTA:NETTA_ISDN=1 -
-Active powerpc mpc8xx - - netta NETTA_ISDN_6412 NETTA:NETTA_ISDN=1,NETTA_6412=1 -
-Active powerpc mpc8xx - - netta NETTA_ISDN_6412_SWAPHOOK NETTA:NETTA_ISDN=1,NETTA_6412=1,NETTA_SWAPHOOK=1 -
-Active powerpc mpc8xx - - netta NETTA_ISDN_SWAPHOOK NETTA:NETTA_ISDN=1,NETTA_SWAPHOOK=1 -
-Active powerpc mpc8xx - - netta NETTA_SWAPHOOK NETTA:NETTA_SWAPHOOK=1 -
-Active powerpc mpc8xx - - netta2 NETTA2 NETTA2:NETTA2_VERSION=1 -
-Active powerpc mpc8xx - - netta2 NETTA2_V2 NETTA2:NETTA2_VERSION=2 -
Active powerpc mpc8xx - - netvia NETVIA NETVIA:NETVIA_VERSION=1 Pantelis Antoniou <panto@intracom.gr>
Active powerpc mpc8xx - - netvia NETVIA_V2 NETVIA:NETVIA_VERSION=2 Pantelis Antoniou <panto@intracom.gr>
Active powerpc mpc8xx - - r360mpi R360MPI - Wolfgang Denk <wd@denx.de>
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+netphone powerpc mpc8xx - -
+netta2 powerpc mpc8xx - -
+netta powerpc mpc8xx - -
rbc823 powerpc mpc8xx - -
quantum powerpc mpc8xx - -
RPXlite_dw powerpc mpc8xx - -
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2
-#error Unsupported CONFIG_NETPHONE version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
-#define CONFIG_NETPHONE 1 /* ...on a NetPhone board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-/* #define MPC8XX_HZ 120000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#if CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4 0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETPHONE_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETPHONE_VERSION == 2
-
-#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define STATUS_LED_BIT 0x00000008 /* bit 28 */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
- (V1) version 1 of the board
- (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
- | PA7 | DSP_INT | Output | DSP interrupt
- | PA10 | DSP_RESET | Output | DSP reset
- | PA14 | USBOE | Output | USB (1)
- | PA15 | USBRXD | Output | USB (1)
- | PB19 | BT_RTS | Output | Bluetooth (0)
- | PB23 | BT_CTS | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP | Output | Display chip select
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PC10 | DISPA0 | Output | Display A0
- | PC11 | BACKLIGHT | Output | Display backlit
- | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
- | | IO_RESET | Output | (V2) General I/O reset
- | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
- | | HOOK | Input | (V2) Hook input interrupt
- | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
- | | F_RY_BY | Input | (V2) NAND F_RY_BY
- | PE17 | F_ALE | Output | NAND F_ALE
- | PE18 | F_CLE | Output | NAND F_CLE
- | PE20 | F_CE | Output | NAND F_CE
- | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
- | | LED | Output | (V2) LED
- | PE27 | SPICS_ER | Output | External serial register CS
- | PE28 | LEDIO1 | Output | (V1) LED
- | | BKBR1 | Input | (V2) Keyboard input scan
- | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
- | | BKBR2 | Input | (V2) Keyboard input scan
- | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
- | | BKBR3 | Input | (V2) Keyboard input scan
- | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
- | | BKBR4 | Input | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register input:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | BKBR1 | (V1) Keyboard input scan
- | 1 | BKBR3 | (V1) Keyboard input scan
- | 2 | BKBR4 | (V1) Keyboard input scan
- | 3 | BKBR2 | (V1) Keyboard input scan
- | 4 | HOOK | (V1) Hook switch
- | 5 | BT_LINK | (V1) Bluetooth link status
- | 6 | HOST_WAKE | (V1) Bluetooth host wake up
- | 7 | OK_ETH | (V1) Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register output:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | KEY1 | Keyboard output scan
- | 1 | KEY2 | Keyboard output scan
- | 2 | KEY3 | Keyboard output scan
- | 3 | KEY4 | Keyboard output scan
- | 4 | KEY5 | Keyboard output scan
- | 5 | KEY6 | Keyboard output scan
- | 6 | KEY7 | Keyboard output scan
- | 7 | BT_WAKE | Bluetooth wake up
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_FLASH2 | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP | DSP interrupt
- | IRQ3 | S_INTER | DUSLIC ???
- | IRQ4 | F_RY_BY | NAND
- | IRQ7 | IRQ_MAX | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT | PHY interrupt for #1
- | IP_A3| RMII2_MDINT | PHY interrupt for #2
- | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
- | IP_A6| OK_ETH | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define CONFIG_SED156X 1 /* use SED156X */
-#define CONFIG_SED156X_PG12864Q 1 /* type of display used */
-
-/* serial interfacing macros */
-
-#define SED156X_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_RXD_MASK 0x00000008
-
-#define SED156X_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_TXD_MASK 0x00000004
-
-#define SED156X_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_CLK_MASK 0x00000002
-
-#define SED156X_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_CS_MASK 0x00000010
-
-#define SED156X_A0_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define SED156X_A0_MASK 0x0020
-
-/*************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
-
-/*************************************************************************************************/
-
-/* phone console configuration */
-
-#define PHONE_CONSOLE_POLL_HZ (CONFIG_SYS_HZ/200) /* poll every 5ms */
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NP" /* netphone */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetPhone"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC885 1 /* This is a MPC885 CPU */
-#define CONFIG_NETTA 1 /* ...on a NetTA board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-#define MPC8XX_HZ 120000000
-/* #define MPC8XX_HZ 100000000 */
-/* #define MPC8XX_HZ 50000000 */
-/* #define MPC8XX_HZ 80000000 */
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#if defined(CONFIG_NETTA_ISDN)
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#undef CONFIG_ETHER_ON_FEC2
-#else
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */
-#define CONFIG_FEC2_PHY_NORXERR 1
-#endif
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-/* POST support */
-#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
- CONFIG_SYS_POST_CODEC | \
- CONFIG_SYS_POST_DSP )
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCMCIA
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 80000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_MAMR_PTA 234
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_MAMR_PTA 195
-#elif MPC8XX_HZ == 80000000
-#define CONFIG_SYS_MAMR_PTA 156
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_MAMR_PTA 98
-#else
-#error Unknown frequency
-#endif
-
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/***********************************************************************************************************
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | OK_ETH_3V | Input | CISCO Ethernet power OK
- | | | | (NetRoute: FEC1, TA: FEC2) (0=power OK)
- | PA6 | P_VCCD1 | Output | TPS2211A PCMCIA
- | PA7 | DCL1_3V | Periph | IDL1 PCM clock
- | PA8 | DSP_DR1 | Periph | IDL1 PCM Data Rx
- | PA9 | L1TXDA | Periph | IDL1 PCM Data Tx
- | PA10 | P_VCCD0 | Output | TPS2211A PCMCIA
- | PA12 | P_SHDN | Output | TPS2211A PCMCIA
- | PA13 | ETH_LOOP | Output | CISCO Loopback remote power
- | | | | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
- | PA14 | P_VPPD0 | Output | TPS2211A PCMCIA
- | PA15 | P_VPPD1 | Output | TPS2211A PCMCIA
- | PB14 | SPIEN_FXO | Output | SPI CS for FXO daughter-board
- | PB15 | SPIEN_S1 | Output | SPI CS for S-interface 1 (NetRoute only)
- | PB16 | DREQ1 | Output | D channel request for S-interface chip 1.
- | PB17 | L1ST3 | Periph | IDL1 timeslot enable signal for PPC
- | PB18 | L1ST2 | Periph | IDL1 timeslot enable signal for PPC
- | PB19 | SPIEN_S2 | Output | SPI CS for S-interface 2 (NetRoute only)
- | PB20 | SPIEN_SEEPROM | Output | SPI CS for serial eeprom
- | PB21 | LEDIO | Output | Led mode indication for PHY
- | PB22 | UART_CTS | Input | UART CTS
- | PB23 | UART_RTS | Output | UART RTS
- | PB24 | UART_RX | Periph | UART Data Rx
- | PB25 | UART_TX | Periph | UART Data Tx
- | PB26 | RMII-MDC | Periph | Free for future use (MII mgt clock)
- | PB27 | RMII-MDIO | Periph | Free for future use (MII mgt data)
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PB31 | RMII1-REFCLK | Periph | RMII reference clock for FEC1
- | PC4 | PHY1_LINK | Input | PHY link state FEC1 (interrupt)
- | PC5 | PHY2_LINK | Input | PHY link state FEC2 (interrupt)
- | PC6 | RMII1-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
- | PC7 | RMII2-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
- | PC8 | P_OC | Input | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
- | PC9 | COM_HOOK1 | Input | Codec interrupt chip #1 (interrupt)
- | PC10 | COM_HOOK2 | Input | Codec interrupt chip #2 (interrupt)
- | PC11 | COM_HOOK4 | Input | Codec interrupt chip #4 (interrupt)
- | PC12 | COM_HOOK3 | Input | Codec interrupt chip #3 (interrupt)
- | PC13 | F_RY_BY | Input | NAND ready signal (interrupt)
- | PC14 | FAN_OK | Input | Fan status signal (interrupt) (1=OK)
- | PC15 | PC15_DIRECT0 | Periph | PCMCIA DMA request.
- | PD3 | F_ALE | Output | NAND
- | PD4 | F_CLE | Output | NAND
- | PD5 | F_CE | Output | NAND
- | PD6 | DSP_INT | Output | DSP debug interrupt
- | PD7 | DSP_RESET | Output | DSP reset
- | PD8 | RMII_MDC | Periph | MII mgt clock
- | PD9 | SPIEN_C1 | Output | SPI CS for codec #1
- | PD10 | SPIEN_C2 | Output | SPI CS for codec #2
- | PD11 | SPIEN_C3 | Output | SPI CS for codec #3
- | PD12 | FSC2 | Periph | IDL2 frame sync
- | PD13 | DGRANT2 | Input | D channel grant from S #2
- | PD14 | SPIEN_C4 | Output | SPI CS for codec #4
- | PD15 | TP700 | Output | Testpoint for software debugging
- | PE14 | RMII2-TXD0 | Periph | FEC2 transmit data
- | PE15 | RMII2-TXD1 | Periph | FEC2 transmit data
- | PE16 | RMII2-REFCLK | Periph | TA: RMII ref clock for
- | | DCL2 | Periph | NetRoute: PCM clock #2
- | PE17 | TP703 | Output | Testpoint for software debugging
- | PE18 | DGRANT1 | Input | D channel grant from S #1
- | PE19 | RMII2-TXEN | Periph | TA: FEC2 tx enable
- | | PCM2OUT | Periph | NetRoute: Tx data for IDL2
- | PE20 | FSC1 | Periph | IDL1 frame sync
- | PE21 | RMII2-RXD0 | Periph | FEC2 receive data
- | PE22 | RMII2-RXD1 | Periph | FEC2 receive data
- | PE23 | L1ST1 | Periph | IDL1 timeslot enable signal for PPC
- | PE24 | U-N1 | Output | Select user/network for S #1 (0=user)
- | PE25 | U-N2 | Output | Select user/network for S #2 (0=user)
- | PE26 | RMII2-RXDV | Periph | FEC2 valid
- | PE27 | DREQ2 | Output | D channel request for S #2.
- | PE28 | FPGA_DONE | Input | FPGA done signal
- | PE29 | FPGA_INIT | Output | FPGA init signal
- | PE30 | UDOUT2_3V | Input | IDL2 PCM input
- | PE31 | | | Free
- +------+----------------+--------+---------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_ER1 | External output register
- +------+----------------+------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | UINTER_3V | S interrupt chips interrupt (common)
- | IRQ3 | IRQ_DSP | DSP interrupt
- | IRQ4 | IRQ_DSP1 | Extra DSP interrupt
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-#define ER_SIZE 0x00010000 /* 64K */
-#define DUMMY_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-#define ER_BASE 0xF1020000
-#define DUMMY_BASE 0xF1FF0000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
-
-/*****************************************************************************/
-
-#if 1
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetTA"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2
-#error Unsupported CONFIG_NETTA2 version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
-#define CONFIG_NETTA2 1 /* ...on a NetTA2 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-/* #define MPC8XX_HZ 120000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#if CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4 0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETTA2_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#elif CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND 0
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETTA2_VERSION == 2
-
-#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETTA2_VERSION == 1
-#define STATUS_LED_BIT 0x00000008 /* bit 28 */
-#elif CONFIG_NETTA2_VERSION == 2
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
- (V1) version 1 of the board
- (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
- | PA7 | DSP_INT | Output | DSP interrupt
- | PA10 | DSP_RESET | Output | DSP reset
- | PA14 | USBOE | Output | USB (1)
- | PA15 | USBRXD | Output | USB (1)
- | PB19 | BT_RTS | Output | Bluetooth (0)
- | PB23 | BT_CTS | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP | Output | Display chip select
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PC10 | DISPA0 | Output | Display A0
- | PC11 | BACKLIGHT | Output | Display backlit
- | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
- | | IO_RESET | Output | (V2) General I/O reset
- | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
- | | HOOK | Input | (V2) Hook input interrupt
- | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
- | | F_RY_BY | Input | (V2) NAND F_RY_BY
- | PE17 | F_ALE | Output | NAND F_ALE
- | PE18 | F_CLE | Output | NAND F_CLE
- | PE20 | F_CE | Output | NAND F_CE
- | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
- | | LED | Output | (V2) LED
- | PE27 | SPICS_ER | Output | External serial register CS
- | PE28 | LEDIO1 | Output | (V1) LED
- | | BKBR1 | Input | (V2) Keyboard input scan
- | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
- | | BKBR2 | Input | (V2) Keyboard input scan
- | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
- | | BKBR3 | Input | (V2) Keyboard input scan
- | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
- | | BKBR4 | Input | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register input:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 4 | HOOK | Hook switch
- | 5 | BT_LINK | Bluetooth link status
- | 6 | HOST_WAKE | Bluetooth host wake up
- | 7 | OK_ETH | Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_FLASH2 | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP | DSP interrupt
- | IRQ3 | S_INTER | DUSLIC ???
- | IRQ4 | F_RY_BY | NAND
- | IRQ7 | IRQ_MAX | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT | PHY interrupt for #1
- | IP_A3| RMII2_MDINT | PHY interrupt for #2
- | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
- | IP_A6| OK_ETH | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-**************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta2 */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetTA2"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone ? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-#endif /* __CONFIG_H */
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */
# define CONFIG_PCMCIA_SLOT_A
-#elif defined(CONFIG_NETTA)
-# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_UC100) /* The UC100 use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
#else
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-/***** NetPhone ********************************************************/
-#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-/* XXX empty just to avoid the error */
/***** STx XTc ********************************************************/
#elif defined(CONFIG_STXXTC)
/* XXX empty just to avoid the error */
projects / u-boot.git / commitdiff