mx7: clock: Use 60MHz for the I2C clocks

When an I2C clock is enabled inside enable_i2c_clk() the clock rate is
configured as PLL_SYS_MAIN_120M_CLK / 2 = 60MHz.

Currently, the I2C clock is retrieved from I2C1_CLK_ROOT, which
may not be the one that was enabled.

As there is no clock driver for the imx7d, it is better to return 60MHz
for the I2C clock.

This provides a workaround for the imx7d-pico board, where I2C4 is
connected to the PMIC.

With this change, it is possible to convert the imx7d-pico board
to DM_I2C and DM_PMIC.

Signed-off-by: Fabio Estevam <festevam@denx.de>

diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c
index 88f6fe0274829ea7eec14742bd3a83fe91e12494..4e232385afc36e809ccdd9ace1cdb18aa091ca55 100644 (file)
--- a/arch/arm/mach-imx/mx7/clock.c
+++ b/arch/arm/mach-imx/mx7/clock.c
@@ -502,7 +502,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
        case MXC_IPG_CLK:
                return get_ipg_clk();
        case MXC_I2C_CLK:
-               return get_root_clk(I2C1_CLK_ROOT);
+               return 60000000;
        case MXC_UART_CLK:
                return get_root_clk(UART1_CLK_ROOT);
        case MXC_CSPI_CLK: