Include external PMUFW (Platform Management Unit FirmWare) to
a Xilinx bootable image (boot.bin).
+config ZYNQMP_SPL_PM_CFG_OBJ_FILE
+ string "PMU firmware configuration object to load at runtime by SPL"
+ depends on SPL
+ help
+ Path to a binary PMU firmware configuration object to be linked
+ into U-Boot SPL and loaded at runtime into the PMU firmware.
+
+ The ZynqMP Power Management Unit (PMU) needs a configuration
+ object for most SoC peripherals to work. To have it loaded by
+ U-Boot SPL set here the file name (absolute path or relative to
+ the top source tree) of your configuration, which must be a
+ binary blob. It will be linked in the SPL binary and loaded
+ into the PMU firmware by U-Boot SPL during board
+ initialization.
+
+ Leave this option empty if your PMU firmware has a hard-coded
+ configuration object or you are loading it by any other means.
+
config ZYNQMP_USB
bool "Configure ZynqMP USB"
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Inter-Processor Communication with the Platform Management Unit (PMU)
+ * firmware.
+ *
+ * (C) Copyright 2019 Luca Ceresoli
+ * Luca Ceresoli <luca@lucaceresoli.net>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+/* IPI bitmasks, register base and register offsets */
+#define IPI_BIT_MASK_APU 0x00001
+#define IPI_BIT_MASK_PMU0 0x10000
+#define IPI_REG_BASE_APU 0xFF300000
+#define IPI_REG_BASE_PMU0 0xFF330000
+#define IPI_REG_OFFSET_TRIG 0x00
+#define IPI_REG_OFFSET_OBR 0x04
+
+/* IPI mailbox buffer offsets */
+#define IPI_BUF_BASE_APU 0xFF990400
+#define IPI_BUF_OFFSET_TARGET_PMU 0x1C0
+#define IPI_BUF_OFFSET_REQ 0x00
+#define IPI_BUF_OFFSET_RESP 0x20
+
+#define PMUFW_PAYLOAD_ARG_CNT 8
+
+/* PMUFW commands */
+#define PMUFW_CMD_SET_CONFIGURATION 2
+
+static void pmu_ipc_send_request(const u32 *req, size_t req_len)
+{
+ u32 *mbx = (u32 *)(IPI_BUF_BASE_APU +
+ IPI_BUF_OFFSET_TARGET_PMU +
+ IPI_BUF_OFFSET_REQ);
+ size_t i;
+
+ for (i = 0; i < req_len; i++)
+ writel(req[i], &mbx[i]);
+}
+
+static void pmu_ipc_read_response(unsigned int *value, size_t count)
+{
+ u32 *mbx = (u32 *)(IPI_BUF_BASE_APU +
+ IPI_BUF_OFFSET_TARGET_PMU +
+ IPI_BUF_OFFSET_RESP);
+ size_t i;
+
+ for (i = 0; i < count; i++)
+ value[i] = readl(&mbx[i]);
+}
+
+/**
+ * Send request to PMU and get the response.
+ *
+ * @req: Request buffer. Byte 0 is the API ID, other bytes are optional
+ * parameters.
+ * @req_len: Request length in number of 32-bit words.
+ * @res: Response buffer. Byte 0 is the error code, other bytes are
+ * optional parameters. Optional, if @res_maxlen==0 the parameters
+ * will not be read.
+ * @res_maxlen: Space allocated for the response in number of 32-bit words.
+ *
+ * @return Error code returned by the PMU (i.e. the first word of the response)
+ */
+static int pmu_ipc_request(const u32 *req, size_t req_len,
+ u32 *res, size_t res_maxlen)
+{
+ u32 status;
+
+ if (req_len > PMUFW_PAYLOAD_ARG_CNT ||
+ res_maxlen > PMUFW_PAYLOAD_ARG_CNT)
+ return -EINVAL;
+
+ pmu_ipc_send_request(req, req_len);
+
+ /* Raise Inter-Processor Interrupt to PMU and wait for response */
+ writel(IPI_BIT_MASK_PMU0, IPI_REG_BASE_APU + IPI_REG_OFFSET_TRIG);
+ do {
+ status = readl(IPI_REG_BASE_APU + IPI_REG_OFFSET_OBR);
+ } while (status & IPI_BIT_MASK_PMU0);
+
+ pmu_ipc_read_response(res, res_maxlen);
+
+ return 0;
+}
+
+/**
+ * Send a configuration object to the PMU firmware.
+ *
+ * @cfg_obj: Pointer to the configuration object
+ * @size: Size of @cfg_obj in bytes
+ */
+void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
+{
+ const u32 request[] = {
+ PMUFW_CMD_SET_CONFIGURATION,
+ (u32)((u64)cfg_obj)
+ };
+ u32 response;
+ int err;
+
+ printf("Loading PMUFW cfg obj (%ld bytes)\n", size);
+
+ err = pmu_ipc_request(request, ARRAY_SIZE(request), &response, 1);
+ if (err)
+ panic("Cannot load PMUFW configuration object (%d)\n", err);
+ if (response != 0)
+ panic("PMUFW returned 0x%08x status!\n", response);
+}
projects / u-boot.git / commitdiff