board: ti: dra76-evm: Add the pmic data

dra76-evm uses lp8736 and tps65917 pmic for powering on
various peripherals. Add data for these pmics and register
for dra76-evm.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index dbe340d23e4fb42e2ae45a4b397ec315fc5cca62..ee2e78b99b6684427fb75db7cd0bc8944519a2ce 100644 (file)
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -340,6 +340,9 @@
 /* Offset is 0.73V for LP873x */
 #define LP873X_BUCK_BASE_VOLT_UV               730000
 
+/* Offset is 0.73V for LP87565 */
+#define LP87565_BUCK_BASE_VOLT_UV              730000
+
 /* TPS659038 */
 #define TPS659038_I2C_SLAVE_ADDR               0x58
 #define TPS659038_REG_ADDR_SMPS12              0x23
@@ -353,6 +356,7 @@
 #define TPS65917_REG_ADDR_SMPS1                0x23
 #define TPS65917_REG_ADDR_SMPS2                0x27
 #define TPS65917_REG_ADDR_SMPS3                0x2F
+#define TPS65917_REG_ADDR_SMPS4                0x33
 
 /* LP873X */
 #define LP873X_I2C_SLAVE_ADDR          0x60
@@ -360,6 +364,11 @@
 #define LP873X_REG_ADDR_BUCK1          0x7
 #define LP873X_REG_ADDR_LDO1           0xA
 
+/* LP87565 */
+#define LP87565_I2C_SLAVE_ADDR         0x61
+#define LP87565_REG_ADDR_BUCK01                0xA
+#define LP87565_REG_ADDR_BUCK23                0xE
+
 /* TPS */
 #define TPS62361_I2C_SLAVE_ADDR                0x60
 #define TPS62361_REG_ADDR_SET0         0x0

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index e335210406d939442f26d7ff2c16a9591d73ff1e..d7e453e579082aaecc4cf14268519d39cfd96fdc 100644 (file)
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -607,6 +607,7 @@ extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
 
 extern struct pmic_data tps659038;
 extern struct pmic_data lp8733;
+extern struct pmic_data lp87565;
 
 void hw_data_init(void);
 

diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index 19a8d10cef15369ca81def4fb87bc33a3dc4452f..7aaf37935776143fe99f2db72d21ed69908601cb 100644 (file)
--- a/arch/arm/mach-omap2/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
@@ -306,6 +306,22 @@ struct pmic_data tps659038 = {
        .gpio_en = 0,
 };
 
+/* The LP87565*/
+struct pmic_data lp87565 = {
+       .base_offset = LP873X_BUCK_BASE_VOLT_UV,
+       .step = 5000, /* 5 mV represented in uV */
+       /*
+        * Offset codes 0 - 0x13 Invalid.
+        * Offset codes 0x14 0x17 give 10mV steps
+        * Offset codes 0x17 through 0x9D give 5mV steps
+        * So let us start with our operating range from .73V
+        */
+       .start_code = 0x17,
+       .i2c_slave_addr = 0x60,
+       .pmic_bus_init  = gpi2c_init,
+       .pmic_write     = palmas_i2c_write_u8,
+};
+
 /* The LP8732 and LP8733 are software-compatible, use common struct */
 struct pmic_data lp8733 = {
        .base_offset = LP873X_BUCK_BASE_VOLT_UV,

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index ee6d5251d5c84c780608ea65bcee4df7518fe70d..8e79350111d3610522d9e11ace6f367c9b08b9ed 100644 (file)
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -357,6 +357,54 @@ struct vcores_data dra752_volts = {
        .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
 };
 
+struct vcores_data dra76x_volts = {
+       .mpu.value[OPP_NOM]     = VDD_MPU_DRA7_NOM,
+       .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
+       .mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+       .mpu.addr       = LP87565_REG_ADDR_BUCK01,
+       .mpu.pmic       = &lp87565,
+       .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
+
+       .eve.value[OPP_NOM]     = VDD_EVE_DRA7_NOM,
+       .eve.value[OPP_OD]      = VDD_EVE_DRA7_OD,
+       .eve.value[OPP_HIGH]    = VDD_EVE_DRA7_HIGH,
+       .eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+       .eve.efuse.reg[OPP_OD]  = STD_FUSE_OPP_VMIN_DSPEVE_OD,
+       .eve.efuse.reg[OPP_HIGH]        = STD_FUSE_OPP_VMIN_DSPEVE_HIGH,
+       .eve.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+       .eve.addr       = TPS65917_REG_ADDR_SMPS1,
+       .eve.pmic       = &tps659038,
+       .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
+
+       .gpu.value[OPP_NOM]     = VDD_GPU_DRA7_NOM,
+       .gpu.value[OPP_OD]      = VDD_GPU_DRA7_OD,
+       .gpu.value[OPP_HIGH]    = VDD_GPU_DRA7_HIGH,
+       .gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM,
+       .gpu.efuse.reg[OPP_OD]  = STD_FUSE_OPP_VMIN_GPU_OD,
+       .gpu.efuse.reg[OPP_HIGH]        = STD_FUSE_OPP_VMIN_GPU_HIGH,
+       .gpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+       .gpu.addr       = LP87565_REG_ADDR_BUCK23,
+       .gpu.pmic       = &lp87565,
+       .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
+
+       .core.value[OPP_NOM]    = VDD_CORE_DRA7_NOM,
+       .core.efuse.reg[OPP_NOM]        = STD_FUSE_OPP_VMIN_CORE_NOM,
+       .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+       .core.addr      = TPS65917_REG_ADDR_SMPS3,
+       .core.pmic      = &tps659038,
+
+       .iva.value[OPP_NOM]     = VDD_IVA_DRA7_NOM,
+       .iva.value[OPP_OD]      = VDD_IVA_DRA7_OD,
+       .iva.value[OPP_HIGH]    = VDD_IVA_DRA7_HIGH,
+       .iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM,
+       .iva.efuse.reg[OPP_OD]  = STD_FUSE_OPP_VMIN_IVA_OD,
+       .iva.efuse.reg[OPP_HIGH]        = STD_FUSE_OPP_VMIN_IVA_HIGH,
+       .iva.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+       .iva.addr       = TPS65917_REG_ADDR_SMPS4,
+       .iva.pmic       = &tps659038,
+       .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
+};
+
 struct vcores_data dra722_volts = {
        .mpu.value[OPP_NOM]     = VDD_MPU_DRA7_NOM,
        .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM,
@@ -622,6 +670,8 @@ void vcores_init(void)
                *omap_vcores = &dra722_volts;
        } else if (board_is_dra71x_evm()) {
                *omap_vcores = &dra718_volts;
+       } else if (board_is_dra76x_evm()) {
+               *omap_vcores = &dra76x_volts;
        } else {
                /* If EEPROM is not populated */
                if (is_dra72x())