Tegra: remove e2220-1170 board

It's an old bringup board with out upstream Linux or L4T support

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d290c44257caf185fbb0fe235912f17a3b30c615..b58f8414726ff9f765a7b21f6a9d5902aaad105b 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -201,7 +201,6 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
        tegra124-venice2.dtb \
        tegra186-p2771-0000-000.dtb \
        tegra186-p2771-0000-500.dtb \
-       tegra210-e2220-1170.dtb \
        tegra210-p2371-0000.dtb \
        tegra210-p2371-2180.dtb \
        tegra210-p2571.dtb \

diff --git a/arch/arm/dts/tegra210-e2220-1170.dts b/arch/arm/dts/tegra210-e2220-1170.dts
deleted file mode 100644 (file)
index e6b0686..0000000
--- a/arch/arm/dts/tegra210-e2220-1170.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/dts-v1/;
-
-#include "tegra210.dtsi"
-
-/ {
-       model = "NVIDIA E2220-1170";
-       compatible = "nvidia,e2220-1170", "nvidia,tegra210";
-
-       chosen {
-               stdout-path = &uarta;
-       };
-
-       aliases {
-               i2c0 = "/i2c@7000d000";
-               mmc0 = "/sdhci@700b0600";
-               mmc1 = "/sdhci@700b0000";
-               usb0 = "/usb@7d000000";
-       };
-
-       memory {
-               reg = <0x0 0x80000000 0x0 0xc0000000>;
-       };
-
-       sdhci@700b0000 {
-               status = "okay";
-               cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
-               power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-               bus-width = <4>;
-       };
-
-       sdhci@700b0600 {
-               status = "okay";
-               bus-width = <8>;
-               non-removable;
-       };
-
-       i2c@7000d000 {
-               status = "okay";
-               clock-frequency = <400000>;
-       };
-
-       usb@7d000000 {
-               status = "okay";
-               dr_mode = "peripheral";
-       };
-
-       clocks {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               clk32k_in: clock@0 {
-                       compatible = "fixed-clock";
-                       reg = <0>;
-                       #clock-cells = <0>;
-                       clock-frequency = <32768>;
-               };
-       };
-};
-
-&uarta {
-       status = "okay";
-};

diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig
index 97ed8e05f43ffe452b0a906e180b365bc9e56e34..17f18cbf3022401a1cebbebe861f40e8124b2f56 100644 (file)
--- a/arch/arm/mach-tegra/tegra210/Kconfig
+++ b/arch/arm/mach-tegra/tegra210/Kconfig
@@ -3,14 +3,6 @@ if TEGRA210
 choice
        prompt "Tegra210 board select"
 
-config TARGET_E2220_1170
-       bool "NVIDIA Tegra210 E2220-1170 board"
-       select BOARD_LATE_INIT
-       help
-         E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM,
-         eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various
-         expansion modules.
-
 config TARGET_P2371_0000
        bool "NVIDIA Tegra210 P2371-0000 board"
        select BOARD_LATE_INIT
@@ -46,7 +38,6 @@ endchoice
 config SYS_SOC
        default "tegra210"
 
-source "board/nvidia/e2220-1170/Kconfig"
 source "board/nvidia/p2371-0000/Kconfig"
 source "board/nvidia/p2371-2180/Kconfig"
 source "board/nvidia/p2571/Kconfig"

diff --git a/board/nvidia/e2220-1170/Kconfig b/board/nvidia/e2220-1170/Kconfig
deleted file mode 100644 (file)
index 0a30f49..0000000
--- a/board/nvidia/e2220-1170/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_E2220_1170
-
-config SYS_BOARD
-       default "e2220-1170"
-
-config SYS_VENDOR
-       default "nvidia"
-
-config SYS_CONFIG_NAME
-       default "e2220-1170"
-
-endif

diff --git a/board/nvidia/e2220-1170/MAINTAINERS b/board/nvidia/e2220-1170/MAINTAINERS
deleted file mode 100644 (file)
index 0abb378..0000000
--- a/board/nvidia/e2220-1170/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-E2220-1170 BOARD
-M:     Tom Warren <twarren@nvidia.com>
-S:     Maintained
-F:     board/nvidia/e2220-1170/
-F:     include/configs/e2220-1170.h
-F:     configs/e2220-1170_defconfig

diff --git a/board/nvidia/e2220-1170/Makefile b/board/nvidia/e2220-1170/Makefile
deleted file mode 100644 (file)
index c956b19..0000000
--- a/board/nvidia/e2220-1170/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2013-2015
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y  += e2220-1170.o

diff --git a/board/nvidia/e2220-1170/e2220-1170.c b/board/nvidia/e2220-1170/e2220-1170.c
deleted file mode 100644 (file)
index b819b04..0000000
--- a/board/nvidia/e2220-1170/e2220-1170.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013-2019
- * NVIDIA Corporation <www.nvidia.com>
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <log.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include "../p2571/max77620_init.h"
-
-void pin_mux_mmc(void)
-{
-       struct udevice *dev;
-       uchar val;
-       int ret;
-
-       /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
-       debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
-       ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
-       if (ret) {
-               printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
-               return;
-       }
-       /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
-       val = 0xF2;
-       ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
-       if (ret)
-               printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
-}

diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig
deleted file mode 100644 (file)
index efe3f8b..0000000
--- a/configs/e2220-1170_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_SYS_TEXT_BASE=0x80080000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xFFFFE000
-CONFIG_TEGRA210=y
-CONFIG_DEFAULT_DEVICE_TREE="tegra210-e2220-1170"
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_STDIO_DEREGISTER=y
-CONFIG_SYS_PROMPT="Tegra210 (E2220-1170) # "
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_BOOTP_PREFER_SERVERIP=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=2
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_DFU_SF=y
-CONFIG_SYS_I2C_TEGRA=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SYS_NS16550=y
-CONFIG_TEGRA114_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0955
-CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y

diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h
deleted file mode 100644 (file)
index 5ed6267..0000000
--- a/include/configs/e2220-1170.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013-2015
- * NVIDIA Corporation <www.nvidia.com>
- */
-
-#ifndef _E2220_1170_H
-#define _E2220_1170_H
-
-#include <linux/sizes.h>
-
-#include "tegra210-common.h"
-
-/* High-level configuration options */
-#define CONFIG_TEGRA_BOARD_STRING      "NVIDIA E2220-1170"
-
-/* Board-specific serial config */
-#define CONFIG_TEGRA_ENABLE_UARTA
-
-/* Environment in eMMC, at the end of 2nd "boot sector" */
-
-/* SPI */
-#define CONFIG_SPI_FLASH_SIZE          (4 << 20)
-
-#include "tegra-common-usb-gadget.h"
-#include "tegra-common-post.h"
-
-#endif /* _E2220_1170_H */