]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
FSL DDR: Convert socrates to new DDR code.
authorKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 03:56:56 +0000 (22:56 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 16:43:51 +0000 (11:43 -0500)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
board/socrates/Makefile
board/socrates/ddr.c [new file with mode: 0644]
board/socrates/sdram.c
include/configs/socrates.h

index a41fead8f4426168bd7c89bc483a450bc26abee9..6fae6014073eae9bffcd3ef92e8029ef24b99eed 100644 (file)
@@ -28,10 +28,15 @@ include $(TOPDIR)/config.mk
 LIB    = $(obj)lib$(BOARD).a
 #
 
-COBJS  := $(BOARD).o law.o tlb.o sdram.o nand.o
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
+COBJS-y        += $(BOARD).o
+COBJS-y        += law.o
+COBJS-y        += tlb.o
+COBJS-y        += nand.o
+COBJS-y        += sdram.o
+COBJS-$(CONFIG_FSL_DDR2) += ddr.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
 SOBJS  := $(addprefix $(obj),$(SOBJS))
 
 $(LIB):        $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c
new file mode 100644 (file)
index 0000000..bbb5ee2
--- /dev/null
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+
+static void
+get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+       i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+       return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+                     unsigned int ctrl_num)
+{
+       unsigned int i;
+
+       if (ctrl_num) {
+               printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+               return;
+       }
+
+       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+               get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
+       }
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+{
+       /*
+        * Factors to consider for clock adjust:
+        *      - number of chips on bus
+        *      - position of slot
+        *      - DDR1 vs. DDR2?
+        *      - ???
+        *
+        * This needs to be determined on a board-by-board basis.
+        *      0110    3/4 cycle late
+        *      0111    7/8 cycle late
+        */
+       popts->clk_adjust = 7;
+
+       /*
+        * Factors to consider for CPO:
+        *      - frequency
+        *      - ddr1 vs. ddr2
+        */
+       popts->cpo_override = 10;
+
+       /*
+        * Factors to consider for write data delay:
+        *      - number of DIMMs
+        *
+        * 1 = 1/4 clock delay
+        * 2 = 1/2 clock delay
+        * 3 = 3/4 clock delay
+        * 4 = 1   clock delay
+        * 5 = 5/4 clock delay
+        * 6 = 3/2 clock delay
+        */
+       popts->write_data_delay = 3;
+
+       /*
+        * Factors to consider for half-strength driver enable:
+        *      - number of DIMMs installed
+        */
+       popts->half_strength_driver_enable = 0;
+}
index 768fe05a241751ebd807fd56e43fc52a52ef2c76..12d1b8a738a23d3ee7fc4c1d82d63c632d88f12f 100644 (file)
@@ -25,6 +25,7 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/fsl_ddr_sdram.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <spd_sdram.h>
@@ -80,7 +81,9 @@ phys_size_t initdram (int board_type)
 {
        long dram_size = 0;
 #if defined(CONFIG_SPD_EEPROM)
-       dram_size = spd_sdram ();
+       dram_size = fsl_ddr_sdram();
+       dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+       dram_size *= 0x100000;
 #else
        dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL);
 #endif
index 8a649425b4a237c750ede5bddfbdd3fcfe7f39cb..15abec199dfec32711042ab8a5facf063469b88e 100644 (file)
 #define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
 
-/*
- * DDR Setup
- */
-#define CFG_DDR_SDRAM_BASE     0x00000000      /* DDR is system memory */
+/* DDR Setup */
+#define CONFIG_FSL_DDR2
+#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+
+#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE  0xDeadBeef
+
+#define CFG_DDR_SDRAM_BASE     0x00000000
 #define CFG_SDRAM_BASE         CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define CONFIG_NUM_DDR_CONTROLLERS     1
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+#define CONFIG_CHIP_SELECTS_PER_CTRL   2
+
+/* I2C addresses of SPD EEPROMs */
+#define SPD_EEPROM_ADDRESS     0x51    /* CTLR 0 DIMM 0 */
 
 #define CONFIG_DDR_DEFAULT_CL  30              /* CAS latency 3        */
 
 #define CFG_DDR_CLK_CONTROL            0x03800000
 #define CFG_SDRAM_SIZE                 256 /* in Megs */
 
-#define CONFIG_SPD_EEPROM      1       /* Use SPD EEPROM for DDR setup*/
-#define SPD_EEPROM_ADDRESS     0x50            /* DDR DIMM */
-#define MPC85xx_DDR_SDRAM_CLK_CNTL     /* 85xx has clock control reg */
-
-/*
- * Flash on the Local Bus
- */
 /*
  * Flash on the LocalBus
  */