ARM: tegra: pinmux: move some type definitions

On some future SoCs, some per-drive-group features became per-pin
features. Move all type definitions early in the header so they can
be enabled irrespective of the setting of TEGRA_PMX_SOC_HAS_DRVGRPS.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
index cb61aa1fa185af15dadc43984670d08b64e927f1..1562fa410c42c8350507c9cfae64497c73bf9c8d 100644 (file)
--- a/arch/arm/include/asm/arch-tegra/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -63,6 +63,35 @@ enum pmux_pin_rcv_sel {
 };
 #endif
 
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+/* Defines a pin group cfg's low-power mode select */
+enum pmux_lpmd {
+       PMUX_LPMD_X8 = 0,
+       PMUX_LPMD_X4,
+       PMUX_LPMD_X2,
+       PMUX_LPMD_X,
+       PMUX_LPMD_NONE = -1,
+};
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pmux_schmt {
+       PMUX_SCHMT_DISABLE = 0,
+       PMUX_SCHMT_ENABLE = 1,
+       PMUX_SCHMT_NONE = -1,
+};
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pmux_hsm {
+       PMUX_HSM_DISABLE = 0,
+       PMUX_HSM_ENABLE = 1,
+       PMUX_HSM_NONE = -1,
+};
+#endif
+
 /*
  * This defines the configuration for a pin, including the function assigned,
  * pull up/down settings and tristate settings. Having set up one of these
@@ -142,35 +171,6 @@ void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
 #define PMUX_DRVDN_MAX 127
 #define PMUX_DRVDN_NONE        -1
 
-#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
-/* Defines a pin group cfg's low-power mode select */
-enum pmux_lpmd {
-       PMUX_LPMD_X8 = 0,
-       PMUX_LPMD_X4,
-       PMUX_LPMD_X2,
-       PMUX_LPMD_X,
-       PMUX_LPMD_NONE = -1,
-};
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
-/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pmux_schmt {
-       PMUX_SCHMT_DISABLE = 0,
-       PMUX_SCHMT_ENABLE = 1,
-       PMUX_SCHMT_NONE = -1,
-};
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_HSM
-/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pmux_hsm {
-       PMUX_HSM_DISABLE = 0,
-       PMUX_HSM_ENABLE = 1,
-       PMUX_HSM_NONE = -1,
-};
-#endif
-
 /*
  * This defines the configuration for a pin group's pad control config
  */

diff --git a/arch/arm/mach-tegra/pinmux-common.c b/arch/arm/mach-tegra/pinmux-common.c
index f24e8c4c50caa51880483af16611a5733942bdea..843c688200b3b1d9ceb7e83103790161086d542e 100644 (file)
--- a/arch/arm/mach-tegra/pinmux-common.c
+++ b/arch/arm/mach-tegra/pinmux-common.c
@@ -56,6 +56,21 @@
         ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
 #endif
 
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+#define pmux_lpmd_isvalid(lpm) \
+       (((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X))
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+#define pmux_schmt_isvalid(schmt) \
+       (((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE))
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+#define pmux_hsm_isvalid(hsm) \
+       (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE))
+#endif
+
 #define _R(offset)     (u32 *)(NV_PA_APB_MISC_BASE + (offset))
 
 #if defined(CONFIG_TEGRA20)
@@ -352,21 +367,6 @@ void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
 #define pmux_drv_isvalid(drv) \
        (((drv) >= PMUX_DRVUP_MIN) && ((drv) <= PMUX_DRVUP_MAX))
 
-#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
-#define pmux_lpmd_isvalid(lpm) \
-       (((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X))
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
-#define pmux_schmt_isvalid(schmt) \
-       (((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE))
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_HSM
-#define pmux_hsm_isvalid(hsm) \
-       (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE))
-#endif
-
 #ifdef TEGRA_PMX_GRPS_HAVE_HSM
 #define HSM_SHIFT      2
 #endif