]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: rmobile: Update E2 Alt
authorMarek Vasut <marek.vasut+renesas@gmail.com>
Mon, 23 Apr 2018 18:24:16 +0000 (20:24 +0200)
committerMarek Vasut <marex@denx.de>
Thu, 26 Apr 2018 11:54:39 +0000 (13:54 +0200)
The E2 Alt port was broken since some time. This patch updates
the E2 Alt port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
arch/arm/dts/r8a7794-alt-u-boot.dts
arch/arm/mach-rmobile/Kconfig.32
board/renesas/alt/Makefile
board/renesas/alt/alt.c
board/renesas/alt/alt_spl.c [new file with mode: 0644]
configs/alt_defconfig
include/configs/alt.h

index 8a14e46a7abc7e766ce220d30a0278e950f62d34..e179335d3a4208d90b09f7e894aa309ce4ce8ec2 100644 (file)
@@ -8,3 +8,7 @@
 
 #include "r8a7794-alt.dts"
 #include "r8a7794-u-boot.dtsi"
+
+&scif2 {
+       u-boot,dm-pre-reloc;
+};
index 176f9a6296206bef56b8102092fe618e1e4d3e97..84c1a6d07bd6ad77e0e0bc17dd3b4419c6200bc3 100644 (file)
@@ -69,6 +69,9 @@ config TARGET_ALT
        bool "Alt board"
        select DM
        select DM_SERIAL
+       select SUPPORT_SPL
+       select USE_TINY_PRINTF
+       select SPL_TINY_MEMSET
 
 config TARGET_SILK
        bool "Silk board"
index 22ab1f43d96aee05e3d303642776289860cd7b6c..53418699b2702827d428f650171cc82e52d7508c 100644 (file)
@@ -6,4 +6,8 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 
-obj-y  := alt.o qos.o ../rcar-common/common.o
+ifdef CONFIG_SPL_BUILD
+obj-y  := alt_spl.o
+else
+obj-y  := alt.o qos.o
+endif
index f2200ef0810f0feba22bcbaac876503713298f89..7598b1a4b92b698827e790cef44e85b517b8f970 100644 (file)
@@ -43,176 +43,65 @@ void s_init(void)
        qos_init();
 }
 
-#define TMU0_MSTP125   (1 << 25)
-#define SCIF2_MSTP719  (1 << 19)
-#define ETHER_MSTP813  (1 << 13)
-#define IIC1_MSTP323   (1 << 23)
-#define MMC0_MSTP315   (1 << 15)
-#define SDHI0_MSTP314  (1 << 14)
-#define SDHI1_MSTP312  (1 << 12)
+#define TMU0_MSTP125   BIT(25)
+#define MMC0_MSTP315   BIT(15)
 
 #define SD1CKCR                0xE6150078
-#define SD1_97500KHZ   0x7
+#define SD_97500KHZ    0x7
 
 int board_early_init_f(void)
 {
        /* TMU */
        mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
 
-       /* SCIF2 */
-       mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+       /* Set SD1 to the 97.5MHz */
+       writel(SD_97500KHZ, SD1CKCR);
 
-       /* ETHER */
-       mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
-
-       /* IIC1 / sh-i2c ch1 */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
-
-#ifdef CONFIG_SH_MMCIF
-       /* MMC */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
-#endif
-
-#ifdef CONFIG_SH_SDHI
-       /* SDHI0, 1 */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI1_MSTP312);
-
-       /*
-        * SD0 clock is set to 97.5MHz by default.
-        * Set SD1 to the 97.5MHz as well.
-        */
-       writel(SD1_97500KHZ, SD1CKCR);
-#endif
        return 0;
 }
 
+#define ETHERNET_PHY_RESET     56      /* GPIO 1 24 */
+
 int board_init(void)
 {
        /* adress of boot parameters */
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-       /* Init PFC controller */
-       r8a7794_pinmux_init();
-
-       /* Ether Enable */
-#if defined(CONFIG_R8A7794_ETHERNET_B)
-       gpio_request(GPIO_FN_ETH_CRS_DV_B, NULL);
-       gpio_request(GPIO_FN_ETH_RX_ER_B, NULL);
-       gpio_request(GPIO_FN_ETH_RXD0_B, NULL);
-       gpio_request(GPIO_FN_ETH_RXD1_B, NULL);
-       gpio_request(GPIO_FN_ETH_LINK_B, NULL);
-       gpio_request(GPIO_FN_ETH_REFCLK_B, NULL);
-       gpio_request(GPIO_FN_ETH_MDIO_B, NULL);
-       gpio_request(GPIO_FN_ETH_TXD1_B, NULL);
-       gpio_request(GPIO_FN_ETH_TX_EN_B, NULL);
-       gpio_request(GPIO_FN_ETH_MAGIC_B, NULL);
-       gpio_request(GPIO_FN_ETH_TXD0_B, NULL);
-       gpio_request(GPIO_FN_ETH_MDC_B, NULL);
-#else
-       gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
-       gpio_request(GPIO_FN_ETH_RX_ER, NULL);
-       gpio_request(GPIO_FN_ETH_RXD0, NULL);
-       gpio_request(GPIO_FN_ETH_RXD1, NULL);
-       gpio_request(GPIO_FN_ETH_LINK, NULL);
-       gpio_request(GPIO_FN_ETH_REFCLK, NULL);
-       gpio_request(GPIO_FN_ETH_MDIO, NULL);
-       gpio_request(GPIO_FN_ETH_TXD1, NULL);
-       gpio_request(GPIO_FN_ETH_TX_EN, NULL);
-       gpio_request(GPIO_FN_ETH_MAGIC, NULL);
-       gpio_request(GPIO_FN_ETH_TXD0, NULL);
-       gpio_request(GPIO_FN_ETH_MDC, NULL);
-#endif
-       gpio_request(GPIO_FN_IRQ8, NULL);
-
-       /* PHY reset */
-       gpio_request(GPIO_GP_1_24, NULL);
-       gpio_direction_output(GPIO_GP_1_24, 0);
+       /* Force ethernet PHY out of reset */
+       gpio_request(ETHERNET_PHY_RESET, "phy_reset");
+       gpio_direction_output(ETHERNET_PHY_RESET, 0);
        mdelay(20);
-       gpio_set_value(GPIO_GP_1_24, 1);
+       gpio_direction_output(ETHERNET_PHY_RESET, 1);
        udelay(1);
 
        return 0;
 }
 
-#define CXR24 0xEE7003C0 /* MAC address high register */
-#define CXR25 0xEE7003C8 /* MAC address low register */
-int board_eth_init(bd_t *bis)
+int dram_init(void)
 {
-#ifdef CONFIG_SH_ETHER
-       int ret = -ENODEV;
-       u32 val;
-       unsigned char enetaddr[6];
-
-       ret = sh_eth_initialize(bis);
-       if (!eth_env_get_enetaddr("ethaddr", enetaddr))
-               return ret;
+       if (fdtdec_setup_memory_size() != 0)
+               return -EINVAL;
 
-       /* Set Mac address */
-       val = enetaddr[0] << 24 | enetaddr[1] << 16 |
-               enetaddr[2] << 8 | enetaddr[3];
-       writel(val, CXR24);
-
-       val = enetaddr[4] << 8 | enetaddr[5];
-       writel(val, CXR25);
-
-       return ret;
-#else
        return 0;
-#endif
 }
 
-int board_mmc_init(bd_t *bis)
+int dram_init_banksize(void)
 {
-       int ret = -ENODEV;
-
-#ifdef CONFIG_SH_MMCIF
-       gpio_request(GPIO_GP_4_31, NULL);
-       gpio_set_value(GPIO_GP_4_31, 1);
-
-       ret = mmcif_mmc_init();
-#endif
-
-#ifdef CONFIG_SH_SDHI
-       gpio_request(GPIO_FN_SD0_DATA0, NULL);
-       gpio_request(GPIO_FN_SD0_DATA1, NULL);
-       gpio_request(GPIO_FN_SD0_DATA2, NULL);
-       gpio_request(GPIO_FN_SD0_DATA3, NULL);
-       gpio_request(GPIO_FN_SD0_CLK, NULL);
-       gpio_request(GPIO_FN_SD0_CMD, NULL);
-       gpio_request(GPIO_FN_SD0_CD, NULL);
-       gpio_request(GPIO_FN_SD1_DATA0, NULL);
-       gpio_request(GPIO_FN_SD1_DATA1, NULL);
-       gpio_request(GPIO_FN_SD1_DATA2, NULL);
-       gpio_request(GPIO_FN_SD1_DATA3, NULL);
-       gpio_request(GPIO_FN_SD1_CLK, NULL);
-       gpio_request(GPIO_FN_SD1_CMD, NULL);
-       gpio_request(GPIO_FN_SD1_CD, NULL);
-
-       /* SDHI 0 */
-       gpio_request(GPIO_GP_2_26, NULL);
-       gpio_request(GPIO_GP_2_29, NULL);
-       gpio_direction_output(GPIO_GP_2_26, 1);
-       gpio_direction_output(GPIO_GP_2_29, 1);
-
-       ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
-                          SH_SDHI_QUIRK_16BIT_BUF);
-       if (ret)
-               return ret;
+       fdtdec_setup_memory_banksize();
 
-       /* SDHI 1 */
-       gpio_request(GPIO_GP_4_26, NULL);
-       gpio_request(GPIO_GP_4_29, NULL);
-       gpio_direction_output(GPIO_GP_4_26, 1);
-       gpio_direction_output(GPIO_GP_4_29, 1);
-
-       ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
-#endif
-       return ret;
+       return 0;
 }
 
-int dram_init(void)
+/* KSZ8041RNLI */
+#define PHY_CONTROL1           0x1E
+#define PHY_LED_MODE           0xC0000
+#define PHY_LED_MODE_ACK       0x4000
+int board_phy_config(struct phy_device *phydev)
 {
-       gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+       int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1);
+       ret &= ~PHY_LED_MODE;
+       ret |= PHY_LED_MODE_ACK;
+       ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret);
 
        return 0;
 }
@@ -223,22 +112,38 @@ const struct rmobile_sysinfo sysinfo = {
 
 void reset_cpu(ulong addr)
 {
-       u8 val;
+       struct udevice *dev;
+       const u8 pmic_bus = 1;
+       const u8 pmic_addr = 0x58;
+       u8 data;
+       int ret;
 
-       i2c_set_bus_num(1); /* PowerIC connected to ch1 */
-       i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
-       val |= 0x02;
-       i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+       ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev);
+       if (ret)
+               hang();
+
+       ret = dm_i2c_read(dev, 0x13, &data, 1);
+       if (ret)
+               hang();
+
+       data |= BIT(1);
+
+       ret = dm_i2c_write(dev, 0x13, &data, 1);
+       if (ret)
+               hang();
 }
 
-static const struct sh_serial_platdata serial_platdata = {
-       .base = SCIF2_BASE,
-       .type = PORT_SCIF,
-       .clk = 14745600,
-       .clk_mode = EXT_CLK,
-};
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+       const u32 load_magic = 0xb33fc0de;
 
-U_BOOT_DEVICE(alt_serials) = {
-       .name = "serial_sh",
-       .platdata = &serial_platdata,
-};
+       /* Block environment access if loaded using JTAG */
+       if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) &&
+           (op != ENVOP_INIT))
+               return ENVL_UNKNOWN;
+
+       if (prio)
+               return ENVL_UNKNOWN;
+
+       return ENVL_SPI_FLASH;
+}
diff --git a/board/renesas/alt/alt_spl.c b/board/renesas/alt/alt_spl.c
new file mode 100644 (file)
index 0000000..f893a49
--- /dev/null
@@ -0,0 +1,411 @@
+/*
+ * board/renesas/alt/alt_spl.c
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dm/platform_data/serial_sh.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+
+#include <spl.h>
+
+#define TMU0_MSTP125   BIT(25)
+#define SCIF2_MSTP719  BIT(19)
+#define QSPI_MSTP917   BIT(17)
+
+#define SD1CKCR                0xE6150078
+#define SD_97500KHZ    0x7
+
+struct reg_config {
+       u16     off;
+       u32     val;
+};
+
+static void dbsc_wait(u16 reg)
+{
+       static const u32 dbsc3_0_base = DBSC3_0_BASE;
+
+       while (!(readl(dbsc3_0_base + reg) & BIT(0)))
+               ;
+}
+
+static void spl_init_sys(void)
+{
+       u32 r0 = 0;
+
+       writel(0xa5a5a500, 0xe6020004);
+       writel(0xa5a5a500, 0xe6030004);
+
+       asm volatile(
+               /* ICIALLU - Invalidate I$ to PoU */
+               "mcr    15, 0, %0, cr7, cr5, 0  \n"
+               /* BPIALL - Invalidate branch predictors */
+               "mcr    15, 0, %0, cr7, cr5, 6  \n"
+               /* Set SCTLR[IZ] */
+               "mrc    15, 0, %0, cr1, cr0, 0  \n"
+               "orr    %0, #0x1800             \n"
+               "mcr    15, 0, %0, cr1, cr0, 0  \n"
+               "isb    sy                      \n"
+               :"=r"(r0));
+}
+
+static void spl_init_pfc(void)
+{
+       static const struct reg_config pfc_with_unlock[] = {
+               { 0x0090, 0x00000000 },
+               { 0x0094, 0x00000000 },
+               { 0x0098, 0x00000000 },
+               { 0x0020, 0x00000000 },
+               { 0x0024, 0x00000000 },
+               { 0x0028, 0x40000000 },
+               { 0x002c, 0x00000155 },
+               { 0x0030, 0x00000002 },
+               { 0x0034, 0x00000000 },
+               { 0x0038, 0x00000000 },
+               { 0x003c, 0x00000000 },
+               { 0x0040, 0x60000000 },
+               { 0x0044, 0x36dab6db },
+               { 0x0048, 0x926da012 },
+               { 0x004c, 0x0008c383 },
+               { 0x0050, 0x00000000 },
+               { 0x0054, 0x00000140 },
+               { 0x0004, 0xffffffff },
+               { 0x0008, 0x00ec3fff },
+               { 0x000c, 0x5bffffff },
+               { 0x0010, 0x01bfe1ff },
+               { 0x0014, 0x5bffffff },
+               { 0x0018, 0x0f4b200f },
+               { 0x001c, 0x03ffffff },
+       };
+
+       static const struct reg_config pfc_without_unlock[] = {
+               { 0x0100, 0x00000000 },
+               { 0x0104, 0x4203fc00 },
+               { 0x0108, 0x00000000 },
+               { 0x010c, 0x159007ff },
+               { 0x0110, 0x80000000 },
+               { 0x0114, 0x00de481f },
+               { 0x0118, 0x00000000 },
+       };
+
+       static const struct reg_config pfc_with_unlock2[] = {
+               { 0x0060, 0xffffffff },
+               { 0x0064, 0xfffff000 },
+               { 0x0068, 0x55555500 },
+               { 0x006c, 0xffffff00 },
+               { 0x0070, 0x00000000 },
+       };
+
+       static const u32 pfc_base = 0xe6060000;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) {
+               writel(~pfc_with_unlock[i].val, pfc_base);
+               writel(pfc_with_unlock[i].val,
+                      pfc_base | pfc_with_unlock[i].off);
+       }
+
+       for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++)
+               writel(pfc_without_unlock[i].val,
+                      pfc_base | pfc_without_unlock[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(pfc_with_unlock2); i++) {
+               writel(~pfc_with_unlock2[i].val, pfc_base);
+               writel(pfc_with_unlock2[i].val,
+                      pfc_base | pfc_with_unlock2[i].off);
+       }
+}
+
+static void spl_init_gpio(void)
+{
+       static const u16 gpio_offs[] = {
+               0x1000, 0x2000, 0x3000, 0x4000, 0x5000
+       };
+
+       static const struct reg_config gpio_set[] = {
+               { 0x2000, 0x24000000 },
+               { 0x4000, 0xa4000000 },
+               { 0x5000, 0x0004c000 },
+       };
+
+       static const struct reg_config gpio_clr[] = {
+               { 0x1000, 0x01000000 },
+               { 0x2000, 0x24000000 },
+               { 0x3000, 0x00000000 },
+               { 0x4000, 0xa4000000 },
+               { 0x5000, 0x0084c380 },
+       };
+
+       static const u32 gpio_base = 0xe6050000;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+               writel(0, gpio_base | 0x20 | gpio_offs[i]);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+               writel(0, gpio_base | 0x00 | gpio_offs[i]);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
+               writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_clr); i++)
+               writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off);
+}
+
+static void spl_init_lbsc(void)
+{
+       static const struct reg_config lbsc_config[] = {
+               { 0x00, 0x00000020 },
+               { 0x08, 0x00002020 },
+               { 0x30, 0x2a103320 },
+               { 0x38, 0xff70ff70 },
+       };
+
+       static const u16 lbsc_offs[] = {
+               0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8
+       };
+
+       static const u32 lbsc_base = 0xfec00200;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) {
+               writel(lbsc_config[i].val,
+                      lbsc_base | lbsc_config[i].off);
+               writel(lbsc_config[i].val,
+                      lbsc_base | (lbsc_config[i].off + 4));
+       }
+
+       for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++)
+               writel(0, lbsc_base | lbsc_offs[i]);
+}
+
+static void spl_init_dbsc(void)
+{
+       static const struct reg_config dbsc_config1[] = {
+               { 0x0018, 0x21000000 },
+               { 0x0018, 0x11000000 },
+               { 0x0018, 0x10000000 },
+               { 0x0280, 0x0000a55a },
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x80000000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config2[] = {
+               { 0x0290, 0x00000006 },
+               { 0x02a0, 0x0005c000 },
+       };
+
+       static const struct reg_config dbsc_config4[] = {
+               { 0x0290, 0x00000010 },
+               { 0x02a0, 0xf00464db },
+               { 0x0290, 0x00000061 },
+               { 0x02a0, 0x0000006d },
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x00000073 },
+               { 0x0020, 0x00000007 },
+               { 0x0024, 0x0f030a02 },
+               { 0x0030, 0x00000001 },
+               { 0x00b0, 0x00000000 },
+               { 0x0040, 0x00000009 },
+               { 0x0044, 0x00000007 },
+               { 0x0048, 0x00000000 },
+               { 0x0050, 0x00000009 },
+               { 0x0054, 0x000a0009 },
+               { 0x0058, 0x00000021 },
+               { 0x005c, 0x00000018 },
+               { 0x0060, 0x00000005 },
+               { 0x0064, 0x0000001b },
+               { 0x0068, 0x00000007 },
+               { 0x006c, 0x0000000a },
+               { 0x0070, 0x00000009 },
+               { 0x0074, 0x00000010 },
+               { 0x0078, 0x000000ae },
+               { 0x007c, 0x00140005 },
+               { 0x0080, 0x00050004 },
+               { 0x0084, 0x50213005 },
+               { 0x0088, 0x000c0000 },
+               { 0x008c, 0x00000200 },
+               { 0x0090, 0x00000040 },
+               { 0x0100, 0x00000001 },
+               { 0x00c0, 0x00020001 },
+               { 0x00c8, 0x20082008 },
+               { 0x0380, 0x00020003 },
+               { 0x0390, 0x0000001f },
+       };
+
+       static const struct reg_config dbsc_config5[] = {
+               { 0x0244, 0x00000011 },
+               { 0x0290, 0x00000003 },
+               { 0x02a0, 0x0300c4e1 },
+               { 0x0290, 0x00000023 },
+               { 0x02a0, 0x00fcb6d0 },
+               { 0x0290, 0x00000011 },
+               { 0x02a0, 0x1000040b },
+               { 0x0290, 0x00000012 },
+               { 0x02a0, 0x85589955 },
+               { 0x0290, 0x00000013 },
+               { 0x02a0, 0x1a852400 },
+               { 0x0290, 0x00000014 },
+               { 0x02a0, 0x300210b4 },
+               { 0x0290, 0x00000015 },
+               { 0x02a0, 0x00000b50 },
+               { 0x0290, 0x00000016 },
+               { 0x02a0, 0x00000006 },
+               { 0x0290, 0x00000017 },
+               { 0x02a0, 0x00000010 },
+               { 0x0290, 0x0000001a },
+               { 0x02a0, 0x910035c7 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config6[] = {
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x00000181 },
+               { 0x0018, 0x11000000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config7[] = {
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x0000fe01 },
+               { 0x0304, 0x00000000 },
+               { 0x00f4, 0x01004c20 },
+               { 0x00f8, 0x014000aa },
+               { 0x00e0, 0x00000140 },
+               { 0x00e4, 0x00081450 },
+               { 0x00e8, 0x00010000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config8[] = {
+               { 0x0014, 0x00000001 },
+               { 0x0010, 0x00000001 },
+               { 0x0280, 0x00000000 },
+       };
+
+       static const u32 dbsc3_0_base = DBSC3_0_BASE;
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++)
+               writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++)
+               writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++)
+               writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off);
+
+       dbsc_wait(0x240);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++)
+               writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++)
+               writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++)
+               writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++)
+               writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off);
+
+}
+
+static void spl_init_qspi(void)
+{
+       mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917);
+
+       static const u32 qspi_base = 0xe6b10000;
+
+       writeb(0x08, qspi_base + 0x00);
+       writeb(0x00, qspi_base + 0x01);
+       writeb(0x06, qspi_base + 0x02);
+       writeb(0x01, qspi_base + 0x0a);
+       writeb(0x00, qspi_base + 0x0b);
+       writeb(0x00, qspi_base + 0x0c);
+       writeb(0x00, qspi_base + 0x0d);
+       writeb(0x00, qspi_base + 0x0e);
+
+       writew(0xe080, qspi_base + 0x10);
+
+       writeb(0xc0, qspi_base + 0x18);
+       writeb(0x00, qspi_base + 0x18);
+       writeb(0x00, qspi_base + 0x08);
+       writeb(0x48, qspi_base + 0x00);
+}
+
+void board_init_f(ulong dummy)
+{
+       mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+       mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+
+       /* Set SD1 to the 97.5MHz */
+       writel(SD_97500KHZ, SD1CKCR);
+
+       spl_init_sys();
+       spl_init_pfc();
+       spl_init_gpio();
+       spl_init_lbsc();
+       spl_init_dbsc();
+       spl_init_qspi();
+}
+
+void spl_board_init(void)
+{
+       /* UART clocks enabled and gd valid - init serial console */
+       preloader_console_init();
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+       const u32 jtag_magic = 0x1337c0de;
+       const u32 load_magic = 0xb33fc0de;
+
+       /*
+        * If JTAG probe sets special word at 0xe6300020, then it must
+        * put U-Boot into RAM and SPL will start it from RAM.
+        */
+       if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) {
+               printf("JTAG boot detected!\n");
+
+               while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic)
+                       ;
+
+               spl_boot_list[0] = BOOT_DEVICE_RAM;
+               spl_boot_list[1] = BOOT_DEVICE_NONE;
+
+               return;
+       }
+
+       /* Boot from SPI NOR with YMODEM UART fallback. */
+       spl_boot_list[0] = BOOT_DEVICE_SPI;
+       spl_boot_list[1] = BOOT_DEVICE_UART;
+       spl_boot_list[2] = BOOT_DEVICE_NONE;
+}
+
+void reset_cpu(ulong addr)
+{
+}
index 19ae070895bfd01c7028463aec3ff62f6adb7b25..9867a5f4d5c1885f94f8034c675385e0e6b24eef 100644 (file)
@@ -1,17 +1,37 @@
 CONFIG_ARM=y
+CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_RMOBILE=y
-CONFIG_SYS_TEXT_BASE=0xE6304000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_R8A7794=y
 CONFIG_TARGET_ALT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="r8a7794-alt-u-boot"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SDRAM=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
@@ -19,22 +39,43 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_DM_GPIO=y
+CONFIG_RCAR_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_DM_MMC=y
 CONFIG_SH_MMCIF=y
+CONFIG_RENESAS_SDHI=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_MICREL=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
 CONFIG_SH_ETHER=y
-CONFIG_BAUDRATE=38400
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_PFC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SH_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
index d6236870b9d64e9b76175c023049f7c1c37cf194..619660b2bd8bcb6e580569492bbcd52877510951 100644 (file)
 
 #include "rcar-gen2-common.h"
 
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR                0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                0xE633FFFC
-#endif
-#define STACK_AREA_SIZE                        0xC000
+#define CONFIG_SYS_INIT_SP_ADDR                0x4f000000
+#define STACK_AREA_SIZE                        0x00100000
 #define LOW_LEVEL_MERAM_STACK \
                (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
 
 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SH_ETHER_CACHE_WRITEBACK
 #define CONFIG_SH_ETHER_CACHE_INVALIDATE
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+#define CONFIG_SH_ETHER_ALIGNE_SIZE    64
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
 /* Board Clock */
-#define RMOBILE_XTAL_CLK        20000000u
-#define CONFIG_SYS_CLK_FREQ     RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ  (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ    (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_P_CLK_FREQ      (CONFIG_PLL1_CLK_FREQ / 24)
-
-#define CONFIG_SYS_TMU_CLK_DIV  4
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS       3
-#define CONFIG_SYS_I2C_SH_SPEED0       400000
-#define CONFIG_SYS_I2C_SH_SPEED1       400000
-#define CONFIG_SYS_I2C_SH_SPEED2       400000
-#define CONFIG_SH_I2C_DATA_HIGH                4
-#define CONFIG_SH_I2C_DATA_LOW         5
-#define CONFIG_SH_I2C_CLOCK            10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-
-/* MMCIF */
-#define CONFIG_SH_MMCIF_ADDR           0xee200000
-#define CONFIG_SH_MMCIF_CLK            48000000
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA      0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA      0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA      0x00000180
-/* SCIF2 */
-#define CONFIG_SMSTP7_ENA      0x00080000
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ            97500000
+#define RMOBILE_XTAL_CLK       20000000u
+#define CONFIG_SYS_CLK_FREQ    RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"
+
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE           0xe6300000
+#define CONFIG_SPL_STACK               0xe6340000
+#define CONFIG_SPL_MAX_SIZE            0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SH_SCIF_CLK_FREQ                65000000
+#endif
 
 #endif /* __ALT_H */