usb: onboard-hub: add driver to manage onboard hub supplies

The main issue the driver addresses is that a USB hub needs to be
powered before it can be discovered. This is often solved by using
"regulator-always-on".

This driver is inspired by the Linux v6.1 driver. It only enables (or
disables) the hub vdd (3v3) supply, so it can be enumerated.
Scanning of the device tree is done in a similar manner to the sandbox,
by the usb-uclass. DT part looks like:

&usbh_ehci {
	...
	#address-cells = <1>;
	#size-cells = <0>;
	hub@1 {
		compatible = "usb424,2514";
		reg = <1>;
		vdd-supply = <&v3v3>;
	};
};

When the bus gets probed, the driver is automatically probed/removed from
the bus tree, as an example on stm32:
STM32MP> usb start
starting USB...
STM32MP> dm tree
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 usb           0  [ + ]   ehci_generic          |   |-- usb@5800d000
 usb_hub       0  [ + ]   usb_onboard_hub       |   |   `-- hub@1
 usb_hub       1  [ + ]   usb_hub               |   |       `-- usb_hub

STM32MP> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Hub (480 Mb/s, 2mA)

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/common/Makefile b/common/Makefile
index 20addfb244c2ddeacc2e83aba541fa8b9ced31c8..7789aab484fdebbdfe5517a2774b8b41cddcdc0e 100644 (file)
--- a/common/Makefile
+++ b/common/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PHYLIB) += miiphyutil.o
 obj-$(CONFIG_USB_HOST) += usb.o usb_hub.o
 obj-$(CONFIG_USB_GADGET) += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+obj-$(CONFIG_USB_ONBOARD_HUB) += usb_onboard_hub.o
 
 # others
 obj-$(CONFIG_CONSOLE_MUX) += iomux.o

diff --git a/common/usb_onboard_hub.c b/common/usb_onboard_hub.c
new file mode 100644 (file)
index 0000000..89e18a2
--- /dev/null
+++ b/common/usb_onboard_hub.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for onboard USB hubs
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ *
+ * Mostly inspired by Linux kernel v6.1 onboard_usb_hub driver
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <power/regulator.h>
+
+struct onboard_hub {
+       struct udevice *vdd;
+};
+
+static int usb_onboard_hub_probe(struct udevice *dev)
+{
+       struct onboard_hub *hub = dev_get_priv(dev);
+       int ret;
+
+       ret = device_get_supply_regulator(dev, "vdd-supply", &hub->vdd);
+       if (ret) {
+               dev_err(dev, "can't get vdd-supply: %d\n", ret);
+               return ret;
+       }
+
+       ret = regulator_set_enable_if_allowed(hub->vdd, true);
+       if (ret)
+               dev_err(dev, "can't enable vdd-supply: %d\n", ret);
+
+       return ret;
+}
+
+static int usb_onboard_hub_remove(struct udevice *dev)
+{
+       struct onboard_hub *hub = dev_get_priv(dev);
+       int ret;
+
+       ret = regulator_set_enable_if_allowed(hub->vdd, false);
+       if (ret)
+               dev_err(dev, "can't disable vdd-supply: %d\n", ret);
+
+       return ret;
+}
+
+static const struct udevice_id usb_onboard_hub_ids[] = {
+       /* Use generic usbVID,PID dt-bindings (usb-device.yaml) */
+       { .compatible = "usb424,2514" }, /* USB2514B USB 2.0 */
+       { }
+};
+
+U_BOOT_DRIVER(usb_onboard_hub) = {
+       .name   = "usb_onboard_hub",
+       .id     = UCLASS_USB_HUB,
+       .probe = usb_onboard_hub_probe,
+       .remove = usb_onboard_hub_remove,
+       .of_match = usb_onboard_hub_ids,
+       .priv_auto = sizeof(struct onboard_hub),
+};

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 8efd4614573649ae18185cf3d6ee7d73756345fc..ebe6bf9498154a2cfddb91aea72091bed5a8a74c 100644 (file)
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -105,6 +105,16 @@ config USB_KEYBOARD
          Say Y here if you want to use a USB keyboard for U-Boot command line
          input.
 
+config USB_ONBOARD_HUB
+       bool "Onboard USB hub support"
+       depends on DM_USB
+       ---help---
+         Say Y here if you want to support discrete onboard USB hubs that
+         don't require an additional control bus for initialization, but
+         need some non-trivial form of initialization, such as enabling a
+         power regulator. An example for such a hub is the Microchip
+         USB2514B.
+
 if USB_KEYBOARD
 
 config USB_KEYBOARD_FN_KEYS

diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
index 956e2a4e8e4e2967bded433fe4e585f89bc9eaf5..93c318c3d1d52a0e1ebbd08402c457665fca1d8f 100644 (file)
--- a/drivers/usb/host/usb-uclass.c
+++ b/drivers/usb/host/usb-uclass.c
@@ -271,19 +271,23 @@ int usb_init(void)
                /* init low_level USB */
                printf("Bus %s: ", bus->name);
 
-#ifdef CONFIG_SANDBOX
                /*
                 * For Sandbox, we need scan the device tree each time when we
                 * start the USB stack, in order to re-create the emulated USB
                 * devices and bind drivers for them before we actually do the
                 * driver probe.
+                *
+                * For USB onboard HUB, we need to do some non-trivial init
+                * like enabling a power regulator, before enumeration.
                 */
-               ret = dm_scan_fdt_dev(bus);
-               if (ret) {
-                       printf("Sandbox USB device scan failed (%d)\n", ret);
-                       continue;
+               if (IS_ENABLED(CONFIG_SANDBOX) ||
+                   IS_ENABLED(CONFIG_USB_ONBOARD_HUB)) {
+                       ret = dm_scan_fdt_dev(bus);
+                       if (ret) {
+                               printf("USB device scan from fdt failed (%d)", ret);
+                               continue;
+                       }
                }
-#endif
 
                ret = device_probe(bus);
                if (ret == -ENODEV) {   /* No such device. */