]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
TQM8548: PCI express support
authorWolfgang Grandegger <wg@grandegger.com>
Thu, 5 Jun 2008 11:12:08 +0000 (13:12 +0200)
committerAndrew Fleming-AFLEMING <afleming@freescale.com>
Wed, 11 Jun 2008 05:05:01 +0000 (00:05 -0500)
This patch adds support for PCI express cards. The board support
now uses common FSL PCI init code, for both, PCI and PCIe on all
TQM85xx modules.

Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
board/tqc/tqm85xx/law.c
board/tqc/tqm85xx/tlb.c
board/tqc/tqm85xx/tqm85xx.c
include/configs/TQM85xx.h

index ad35464e47c01b1f331a48551a8438928b706199..bec1ed50892968a8163c5191d0ec918bfd928450 100644 (file)
  *
  * 0x0000_0000    0x7fff_ffff     DDR                     2G
  * 0x8000_0000    0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000    0xdfff_ffff     RapidIO                 512M
+ * 0xc000_0000    0xdfff_ffff     RapidIO or PCI express  512M
  * 0xe000_0000    0xe000_ffff     CCSR                    1M
  * 0xe200_0000    0xe2ff_ffff     PCI1 IO                 16M
  * 0xe300_0000    0xe3ff_ffff     CAN                     16M
- * 0xf800_0000    0xf80f_ffff     BCSR                    1M
+ * 0xef00_0000    0xefff_ffff     PCI express IO          16M
  * 0xfe00_0000    0xffff_ffff     FLASH (boot bank)       32M
  *
  * Notes:
@@ -49,10 +49,17 @@ struct law_entry law_table[] = {
        SET_LAW_ENTRY (2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
        SET_LAW_ENTRY (3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
        SET_LAW_ENTRY (4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-       SET_LAW_ENTRY (5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+#ifdef CONFIG_PCIE1
+       SET_LAW_ENTRY (5, CFG_PCIE1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+#else /* !CONFIG_PCIE1 */
+       SET_LAW_ENTRY (5, CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+#endif /* CONFIG_PCIE1 */
 #ifdef CONFIG_CAN_DRIVER
-       SET_LAW_ENTRY (6, CFG_CAN_BASE, LAWAR_SIZE_16M, LAW_TRGT_IF_LBC),
+       SET_LAW_ENTRY (6, CFG_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
 #endif /* CONFIG_CAN_DRIVER */
+#ifdef CONFIG_PCIE1
+       SET_LAW_ENTRY (7, CFG_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
+#endif /* CONFIG_PCIE */
 };
 
 int num_law_entries = ARRAY_SIZE (law_table);
index dc362012d86f9edb1fd5939fabcec3a89c8e278f..7c4b9a1f47bd2cf264ac01a7c59e4297deac7d6a 100644 (file)
@@ -74,6 +74,24 @@ struct fsl_e_tlb_entry tlb_table[] = {
                       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
                       0, 3, BOOKE_PAGESZ_256M, 1),
 
+#ifdef CONFIG_PCIE1
+       /*
+        * TLB 4:       256M    Non-cacheable, guarded
+        * 0xc0000000   256M    PCI express MEM First half
+        */
+       SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                      0, 4, BOOKE_PAGESZ_256M, 1),
+
+       /*
+        * TLB 5:       256M    Non-cacheable, guarded
+        * 0xd0000000   256M    PCI express MEM Second half
+        */
+       SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE + 0x10000000,
+                      CFG_PCIE1_MEM_BASE + 0x10000000,
+                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                      0, 5, BOOKE_PAGESZ_256M, 1),
+#else /* !CONFIG_PCIE */
        /*
         * TLB 4:       256M    Non-cacheable, guarded
         * 0xc0000000   256M    Rapid IO MEM First half
@@ -90,6 +108,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                       CFG_RIO_MEM_BASE + 0x10000000,
                       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
                       0, 5, BOOKE_PAGESZ_256M, 1),
+#endif /* CONFIG_PCIE */
 
        /*
         * TLB 6:        64M    Non-cacheable, guarded
@@ -116,6 +135,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
                       CFG_DDR_SDRAM_BASE + 0x10000000,
                       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
                       0, 8, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+       /*
+        * TLB 9:        16M    Non-cacheable, guarded
+        * 0xef000000    16M    PCI express IO
+        */
+       SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+                      0, 9, BOOKE_PAGESZ_16M, 1),
+#endif /* CONFIG_PCIE */
+
 };
 
 int num_tlb_entries = ARRAY_SIZE (tlb_table);
index f96cec3e623bf2a2be63eb1e46c75d2192833492..f1c2e58edd0f02c30346b7c7d6ca672f3b86eb2e 100644 (file)
@@ -36,6 +36,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <asm/io.h>
 #include <ioports.h>
 #include <flash.h>
@@ -257,13 +258,6 @@ int checkboard (void)
        }
        putc ('\n');
 
-#ifdef CONFIG_PCI
-       printf ("PCI1:  32 bit, %d MHz (compiled)\n",
-               CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-       printf ("PCI1:  disabled\n");
-#endif
-
        /*
         * Initialize local bus.
         */
@@ -537,38 +531,180 @@ void local_bus_init (void)
 #endif /* CONFIG_CAN_DRIVER */
 }
 
-#if defined(CONFIG_PCI)
 /*
  * Initialize PCI Devices, report devices found.
  */
+static int first_free_busno;
 
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-       {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_IDSEL_NUMBER, PCI_ANY_ID,
-        pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-                                    PCI_ENET0_MEMADDR,
-                                    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-       {}
-};
-#endif
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+static struct pci_controller pci1_hose;
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
 
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-      config_table:pci_mpc85xxads_config_table,
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif /* CONFIG_PCIE1 */
+
+static inline void init_pci1(void)
+{
+       volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+       uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCI1_ADDR;
+       extern void fsl_pci_init(struct pci_controller *hose);
+       struct pci_controller *hose = &pci1_hose;
+
+       /* PORDEVSR[15] */
+       uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+       /* PORDEVSR[14] */
+       uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+       /* PORPLLSR[16] */
+       uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+       uint pci_agent = (host_agent == 3) || (host_agent == 4 ) ||
+               (host_agent == 6);
+
+       uint pci_speed = CONFIG_SYS_CLK_FREQ;   /* PCI PSPEED in [4:5] */
+
+       if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+               printf ("PCI1:  %d bit, %s MHz, %s, %s, %s\n",
+                       (pci_32) ? 32 : 64,
+                       (pci_speed == 33333333) ? "33" :
+                       (pci_speed == 66666666) ? "66" : "unknown",
+                       pci_clk_sel ? "sync" : "async",
+                       pci_agent ? "agent" : "host",
+                       pci_arb ? "arbiter" : "external-arbiter");
+
+
+               /* inbound */
+               pci_set_region (hose->regions + 0,
+                               CFG_PCI_MEMORY_BUS,
+                               CFG_PCI_MEMORY_PHYS,
+                               CFG_PCI_MEMORY_SIZE,
+                               PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+
+               /* outbound memory */
+               pci_set_region (hose->regions + 1,
+                               CFG_PCI1_MEM_BASE,
+                               CFG_PCI1_MEM_PHYS,
+                               CFG_PCI1_MEM_SIZE,
+                               PCI_REGION_MEM);
+
+               /* outbound io */
+               pci_set_region (hose->regions + 2,
+                               CFG_PCI1_IO_BASE,
+                               CFG_PCI1_IO_PHYS,
+                               CFG_PCI1_IO_SIZE,
+                               PCI_REGION_IO);
+
+               hose->region_count = 3;
+
+               hose->first_busno = first_free_busno;
+               pci_setup_indirect (hose, (int)&pci->cfg_addr,
+                                   (int)&pci->cfg_data);
+
+               fsl_pci_init (hose);
+
+               printf ("       PCI on bus %02x..%02x\n",
+                       hose->first_busno, hose->last_busno);
+
+               first_free_busno = hose->last_busno + 1;
+#ifdef CONFIG_PCIX_CHECK
+               if (!(gur->pordevsr & PORDEVSR_PCI)) {
+                       ushort reg16 =
+                               PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
+                               PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+                       uint dev = PCI_BDF(hose->first_busno, 0, 0);
+
+                       /* PCI-X init */
+                       if (CONFIG_SYS_CLK_FREQ < 66000000)
+                               puts ("PCI-X will only work at 66 MHz\n");
+
+                       pci_hose_write_config_word (hose, dev, PCIX_COMMAND,
+                                                   reg16);
+               }
 #endif
-};
+       } else {
+               puts ("PCI1:  disabled\n");
+       }
+#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+       gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif /* CONFIG_PCI || CONFIG_PCI1) */
+}
+
+static inline void init_pcie1(void)
+{
+       volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_PCIE1
+       uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+       uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCIE1_ADDR;
+       extern void fsl_pci_init(struct pci_controller *hose);
+       struct pci_controller *hose = &pcie1_hose;
+       int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) ||
+               (host_agent == 3);
+
+       int pcie_configured  = io_sel >= 1;
+
+       if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+               printf ("PCIe:  %s, base address %x",
+                       pcie_ep ? "End point" : "Root complex", (uint)pci);
+
+               if (pci->pme_msg_det) {
+                       pci->pme_msg_det = 0xffffffff;
+                       debug (", with errors. Clearing. Now 0x%08x",
+                              pci->pme_msg_det);
+               }
+               puts ("\n");
 
-#endif /* CONFIG_PCI */
+               /* inbound */
+               pci_set_region (hose->regions + 0,
+                               CFG_PCI_MEMORY_BUS,
+                               CFG_PCI_MEMORY_PHYS,
+                               CFG_PCI_MEMORY_SIZE,
+                               PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+               /* outbound memory */
+               pci_set_region (hose->regions + 1,
+                               CFG_PCIE1_MEM_BASE,
+                               CFG_PCIE1_MEM_PHYS,
+                               CFG_PCIE1_MEM_SIZE,
+                               PCI_REGION_MEM);
+
+               /* outbound io */
+               pci_set_region (hose->regions + 2,
+                               CFG_PCIE1_IO_BASE,
+                               CFG_PCIE1_IO_PHYS,
+                               CFG_PCIE1_IO_SIZE,
+                               PCI_REGION_IO);
+
+               hose->region_count = 3;
+
+               hose->first_busno = first_free_busno;
+               pci_setup_indirect(hose, (int)&pci->cfg_addr,
+                                  (int)&pci->cfg_data);
+
+               fsl_pci_init (hose);
+               printf ("       PCIe on bus %02x..%02x\n",
+                       hose->first_busno, hose->last_busno);
+
+               first_free_busno = hose->last_busno + 1;
+
+       } else {
+               printf ("PCIe:  disabled\n");
+       }
+#else /* !CONFIG_PCIE1 */
+       gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif /* CONFIG_PCIE1 */
+}
 
 void pci_init_board (void)
 {
-#ifdef CONFIG_PCI
-       pci_mpc85xx_init (&hose);
-#endif /* CONFIG_PCI */
+       init_pci1();
+       init_pcie1();
 }
 
-#if defined(CONFIG_OF_BOARD_SETUP)
+#ifdef CONFIG_OF_BOARD_SETUP
 void ft_board_setup (void *blob, bd_t *bd)
 {
        int node, tmp[2];
@@ -579,16 +715,23 @@ void ft_board_setup (void *blob, bd_t *bd)
        node = fdt_path_offset (blob, "/aliases");
        tmp[0] = 0;
        if (node >= 0) {
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
                path = fdt_getprop (blob, node, "pci0", NULL);
                if (path) {
-                       tmp[1] = hose.last_busno - hose.first_busno;
+                       tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
                        do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
                }
-#endif
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#ifdef CONFIG_PCIE1
+               path = fdt_getprop (blob, node, "pci1", NULL);
+               if (path) {
+                       tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+                       do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
+               }
+#endif /* CONFIG_PCIE1 */
        }
 }
-#endif
+#endif /* CONFIG_OF_BOARD_SETUP */
 
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
index a02d0018e3e54e5840acd0f9497f8da218cbeea6..21551304ca613ff9ce9a9104b920ced2d749f2b7 100644 (file)
 #define CONFIG_MPC85xx         1       /* MPC8540/60/55/41             */
 
 #define CONFIG_PCI
+#define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code     */
+#define CONFIG_PCIX_CHECK              /* PCIX olny works at 66 MHz    */
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCI1
+#define CONFIG_PCIE1
+#define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata       */
+#endif
+
 #define CONFIG_TSEC_ENET               /* tsec ethernet support        */
 
 #define CONFIG_MISC_INIT_R     1       /* Call misc_init_r             */
 #define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
 
+#define CFG_PCI1_ADDR          (CFG_CCSRBAR + 0x8000)
+#define CFG_PCI2_ADDR          (CFG_CCSRBAR + 0x9000)
+#define CFG_PCIE1_ADDR         (CFG_CCSRBAR + 0xa000)
+
 /*
  * DDR Setup
  */
 #define CFG_DTT_LOW_TEMP       -30
 #define CFG_DTT_HYSTERESIS     3
 
+#ifndef CONFIG_PCIE1
 /* RapidIO MMU */
 #define CFG_RIO_MEM_BASE       0xc0000000      /* base address         */
 #define CFG_RIO_MEM_PHYS       CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE       0x20000000      /* 128M                 */
+#define CFG_RIO_MEM_SIZE       0x20000000      /* 512M                 */
+#endif /* CONFIG_PCIE1 */
 
 /*
  * General PCI
 #define CFG_PCI1_IO_PHYS       CFG_PCI1_IO_BASE
 #define CFG_PCI1_IO_SIZE       0x1000000       /*  16M                 */
 
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS     0x00000000
+#define CFG_PCI_MEMORY_PHYS    0x00000000
+#define CFG_PCI_MEMORY_SIZE    0x80000000
+
+#ifdef CONFIG_PCIE1
+/*
+ * General PCI express
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCIE1_MEM_BASE     0xc0000000
+#define CFG_PCIE1_MEM_PHYS     CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE     0x20000000      /* 512M                 */
+#define CFG_PCIE1_IO_BASE      0xef000000
+#define CFG_PCIE1_IO_PHYS      CFG_PCIE1_IO_BASE
+#define CFG_PCIE1_IO_SIZE      0x1000000       /* 16M                  */
+
+#endif /* CONFIG_PCIE1 */
+
 #if defined(CONFIG_PCI)
 
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */