tbs2910: explicitly set boot address

Set missing boot address in bootm command. This fixes the error:
 Wrong Image Format for bootm command
 ERROR: can't get kernel image!

Reported-by: Uwe Scheffler <scheffler.u@web.de>
Signed-off-by: Soeren Moch <smoch@web.de>
Tested-by: Uwe Scheffler <scheffler.u@web.de>

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 70b440340ff726123888d0405bafa444a42340eb..4534695598b0707d42b6062140f5a871c268ebcd 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -190,7 +190,7 @@
        "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
                        "rdinit=/sbin/init enable_wait_mode=off\0" \
        "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
-                       "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+                       "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
        "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
        "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
                        "run bootargs_upd; " \